Cisco C9610 Series Smart Switches Hardware Installation Guide

Standard and optional accessory kit contents

Updated: February 5, 2026

Want to summarize with AI?

On this page

Overview

Standard accessory kit contents

Optional accessory kit contents

23-inch rack mount kit contents

NEBS kits

NEBS filter kit

Overview

Describes the standard and optional accessory kits that are available with the Cisco C9610 switch.

This section provides information about the standard accessory kit that ships along with the Cisco C9610 series smart switches and also the optional accessory kits that are available for ordering separately.

Standard accessory kit contents

The standard accessory kit contains the switch you ordered and other components needed for installation.

Note

Verify that you have received these items. If any item is missing or damaged, contact your Cisco representative or reseller for instructions.


Switch model	Accessory kit part number
Cisco C9610 series smart switch	C9610-19-KIT-4= Cisco C9610 series 10 slot chassis 4 post 19-inch rack mount kit

The Cisco C9610 switches ship with a standard accessory kit, which includes these items.

Table 1. Standard accessory kit (C9610-19-KIT-4=)
Item	Quantity
10-32 x 0.75 inch M, Phillips screws	50
12-24 x 0.75 inch M, Phillips screws	50
Adjustable rack support	2
Chassis rear-mounting bracket Fabricated metal chassis bracket to secure the chassis to the rack enclosure.	2
Documentation pointer card Provides references to related documentation on cisco.com	1
Rear rack-mounting bracket Fabricated metal bracket at the rear of the rack.	2
M4 x 8mm Phillips pan-head screws	6
M6 x 19mm Phillips pan-head screws	50

Optional accessory kit contents

C9610-ACC-KIT is an optional accessory kit. You must order it separately by using the chassis-specific part number.


Switch model	Accessory kit part number
Cisco C9610 series smart switch	C9610-ACC-KIT Cisco C9610 accessory kit

This table lists the contents of the Cisco C9610 accessory kit.

Table 1. Accessory kit contents
Item and description	Quantity
Adapter, DB9F/RJ45F	1
Documentation pointer card Provides references to related documentation on cisco.com	1
Fabricated plastic cable management guide	4
M3 x 6 mm Phillips pan-head screws	4
M6 x 19 mm Phillips pan-head screws	20
Metal brackets Fabricated metal rack brackets for mounting cable management onto the chassis.	2

23-inch rack mount kit contents

The 23-inch rack mount kit (C9610-23-KIT-2=) is not part of the standard accessory kit. You must order it separately by using the chassis-specific part number.


Switch model	Accessory kit part number
Cisco C9610 series smart switch	C9610-23-KIT-2= Cisco C9610 accessory kit

The 23-inch rack mount kit consists of these items.

Table 1. Contents of the 23-Inch rack mount kit
Item	Quantity
10-32 x ¾-inch Phillips binder-head screws	50
12-24 x ¾-inch Phillips binder-head screws	50
2-post rack support left A fabricated metal chassis left bracket to secure the chassis to the rack enclosure	1
2-post rack support right A fabricated metal chassis right bracket to secure the chassis to the rack enclosure	1
Documentation pointer card Provides references to related documentation on cisco.com	1
M4 x 6mm Phillips screws	26
M4 x 8mm Phillips screws	16
M6 x 19mm Phillips pan-head screws	50
Rack brackets Fabricated metal rack brackets to support the weight of the chassis.	2

NEBS kits

The 19-inch rack mount Network Equipment-Building System (NEBS) kit is not a standard accessory kit. You must order it separately by using the chassis-specific part number.


Switch model	19-Inch rack mount NEBS kit part number
Cisco C9610 series smart switch	C9610-NEBS-KIT= Cisco C9610 series 10 slot chassis NEBS kit

The 19-inch rack mount kit for NEBS installation consists of these items.

Table 1. Contents of the NEBS kit
Item	Quantity
Top hood Module to be installed as top hood of NEBS kit.	1
Bottom hood Module to be installed as bottom of the NEBS kit.	1
Left cable management bracket Left cable management with brushes.	1
Left filter door Left door with the filter assembled.	1
Right cable management bracket Right cable management with brushes.	1
Right filter door Right door with the filter assembled.	1
Shoulder screws Shoulder screws for door installation.	4
M3x6 mm Torx flat head screws	16
M3x8 mm Phillips pan head screws	4

NEBS filter kit

The NEBS air filter is not a standard accessory kit. You must order it separately by using the chassis-specific part number.


Switch model	NEBS filter part number
Cisco C9610 series smart switch	C9610-NEBSFILTER= Cisco C9610 series 10 slot chassis NEBS filter

Table 2. Contents of the NEBS kit
Item	Quantity
Air filter door Filter	2

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.