Cisco C9350 Series Smart Switches Hardware Installation Guide

Shipping box contents

Updated: May 15, 2026

Want to summarize with AI?

Overview

Contents that are shipped with your Cisco C9350 switch.

The shipping box contains the model of the switch you ordered and other components needed for installation. Some components are optional, depending on your order.

Note

Verify that you have received these items. If any item is missing or damaged, contact your Cisco representative or reseller for instructions.

Table 1. Shipping box contents (standard and optional)
Item	Quantity
Cisco C9350 Series Smart Switch with optional network module ¹	1
AC power cord	1
Documentation pointer card Product documentation and compliance document	1
Rubber mounting feet	4
Ground lug screw and ring terminal	1
Number 12 pan-head screws	4
Number 10 pan-head screws	4
Number 8 Phillips flat-head screws	8
Cable guide	1
M4.0 x 20mm Phillips pan-head screw	1
(Optional) RJ-45 console cable ¹	-
(Optional) USB console cable ¹	-
(Optional) StackWise-1.6T cable (0.5-meter, 1-meter, or 3-meter) ¹	-
(Optional) StackPower cable (0.35-meter or 1-meter) ¹	-

Note

The item is orderable.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.