Provides methods to verify enhanced application-aware routing (EAAR) configuration and operation using show commands.
To verify the enhanced application-aware routing configuration and display the configured parameters for EAAR, use the show sdwan app-route params command.
Device# show sdwan app-route params
*EAAR = Enhanced Application-Aware Routing
Config: :Enabled
Poll interval: :10000
Poll multiplier: :6
App route
Poll interval: :600000
Poll multiplier: :6
SLA dampening
Config: :Enabled
Multiplier: :120
You can use the show sdwan bfd sessions alt command to highlight the flags for EAAR.
Device# show sdwan bfd sessions alt
*Sus = Suspend
*GREinUDP = GREinUDP encap
*EAAR = Enhanced Application-Aware Routing
*NA = Flag Not Set
SOURCE TLOC REMOTE TLOC DST PUBLIC DST PUBLIC
SYSTEM IP SITE ID STATE COLOR COLOR SOURCE IP IP PORT ENCAP BFD-LD FLAGS UPTIME
-------------------------------------------------------------------------------------------------------------------------------------------------------------
172.16.0.0 100 up lte lte 10.0.0.0 10.0.0.1 12367 ipsec 20013 NA 0:07:48:38
172.16.0.1 100 up lte lte 10.0.0.0 10.0.0.1 12377 ipsec 20014 NA 0:07:48:39
172.16.0.0 400 up lte lte 10.0.0.0 10.0.0.1 12366 ipsec 20015 NA 0:07:48:39
172.16.0.1 500 up lte lte 10.0.0.0 10.0.0.1 12366 ipsec 20016 EAAR 0:07:48:39
You can use show sdwan app-route stats summary command to display the app-route (PfR) statistics details for each tunnel, across different intervals of measurements, for every configured APC.
The total-packets field in the show sdwan app-route stats summary output displays values in multiples of 64 or 0 and includes both application packets and BFD probes. For per-interval application packet counts, refer to the tx-data-pkts and rx-data-pkts fields.
Device# show sdwan app-route stats summary
app-route statistics 10.0.0.0 10.0.0.0 ipsec 12366 12367
remote-system-ip 172.16.0.0
local-color lte
remote-color lte
sla-class-index 0,1,2,3
fallback-sla-class-index None
enhanced-app-route Enabled
sla-dampening-index 4,5
app-probe-class-list None
mean-loss 0
mean-latency 0
mean-jitter 0
TOTAL AVERAGE AVERAGE TX DATA RX DATA IPV6 TX IPV6 RX
INDEX PACKETS LOSS LATENCY JITTER PKTS PKTS DATA PKTS DATA PKTS
--------------------------------------------------------------------------------------------------------------------------------------------------
0 664 0 0 0 0 0 0 0
1 663 0 0 0 0 0 0 0
2 666 0 0 0 0 0 0 0
3 664 0 0 0 0 0 0 0
4 662 0 0 0 0 0 0 0
5 664 0 0 0 0 0 0 0