Cisco Catalyst SD-WAN Policies Configuration Guide, Releases 26.x and Later

PDF

Cisco Catalyst SD-WAN Policies Configuration Guide, Releases 26.x and Later

Monitor default AAR and QoS policies

Updated: April 24, 2026

Want to summarize with AI?

Log in

Configure navigation in Cisco SD-WAN Manager to verify the status of default Application Aware Routing (AAR), traffic data, and QoS policies. This task enables you to view policy lists and confirm their deployment using the platform's policy menus.

This task allows you to monitor and verify the status of default Application Aware Routing (AAR) and Quality of Service (QoS) policies in Cisco SD-WAN Manager.

  • Ensures visibility into created AAR, traffic data, and QoS policies.

  • Supports validation of policy deployment and effectiveness.

Use this task when you need to check the operational status or configuration of default AAR and QoS policies within Cisco SD-WAN Manager.

Monitoring these policies is essential for maintaining optimal network performance and ensuring that traffic management rules are correctly applied.

  • Applicable after policy creation or modification.

  • Useful for troubleshooting or routine verification of policy status.

Before you begin

Access to Cisco SD-WAN Manager is required.

  • Ensure you have appropriate permissions to view configuration and policy menus.

Follow these steps to monitor default AAR and QoS policies:

Procedure

1.

Monitor default AAR policies in Cisco SD-WAN Manager.

  • From the Cisco SD-WAN Manager menu, choose Configuration > Policies.

  • Click Custom Options.

  • Choose Traffic Policy from Centralized Policy.

  • Click Application Aware Routing.

    A list of AAR policies is displayed.

  • Click Traffic Data.

    A list of traffic data policies is displayed.
2.

Monitor QoS policies in Cisco SD-WAN Manager.

  • From the Cisco SD-WAN Manager menu, choose Configuration > Policies.

  • Click Custom Options.

  • Choose Forwarding Class/QoS from Localized Policy.

  • Click QoS Map.

    A list of QoS policies is displayed.

After completing these steps, you will be able to view lists of default AAR, traffic data, and QoS policies in Cisco SD-WAN Manager. You can confirm their status and verify that the policies are correctly deployed and operational.

What to do next

For further verification or troubleshooting, consult the referenced documentation or review policy logs as needed.

  • Refer to external resources for advanced policy validation.