Cisco Catalyst SD-WAN Policies Configuration Guide, Releases 26.x and Later

Configure BFD template using configuration groups

Updated: September 23, 2026

Want to summarize with AI?

Use these steps to configure BFD template using configuration groups.

Procedure

From the Cisco SD-WAN Manager menu, choose Configuration > Configuration Groups.
Create and configure a BFD feature in a System profile.

Configure basic settings.

Table 1. Basic Configuration
Field	Description
Poll Interval(In Millisecond)	Specify how often BFD polls all data plane tunnels on a router to collect packet latency, loss, and other statistics used by application-aware routing. Range: 1 through 4,294,967,296 (2³² – 1) milliseconds Default: 600,000 milliseconds (10 minutes)
Multiplier	Specify the value by which to multiply the poll interval, to set how often application-aware routing acts on the data plane tunnel statistics to figure out the loss and latency and to calculate new tunnels if the loss and latency times do not meet the configured SLAs. Range: 1 through 6 Default: 6
DSCP Values for BFD Packets(decimal)	Specify the Differentiated Services Code Point (DSCP) value of the BFD packets that is used in the DSCP control traffic. Range: 0-63 Default: 48

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.