Verify that devices with deployed Cisco Cyber Vision configuration groups appear as active sensors in the Cisco Cyber Vision Center.
Verify that the Cisco Cyber Vision application has been successfully installed on devices and that the devices are operating as sensors for Cisco Cyber Vision.
When you create a configuration group with a Cisco Cyber Vision feature, deploying the configuration group to devices triggers the devices to install the Cisco Cyber Vision application. It takes several minutes for a device to install the Cisco Cyber Vision application. After a successful installation, the device operates as a sensor for Cisco Cyber Vision. The device appears in the sensor list Cisco Cyber Vision Center. See Cisco Cyber Vision Application.
Before you begin
Deploy a configuration group with a Cisco Cyber Vision feature to one or more devices. See Deploy a configuration group with a Cisco cyber vision feature.
Follow these steps to verify that Cisco SD-WAN Manager has connected to the Cisco Cyber Vision Center:
Procedure
| 1. | Log in to the Cisco Cyber Vision Center. |
|
| 2. | View the active sensors. For details, see the latest Cisco Cyber Vision GUI Administration Guide. Each device appears separately in the list of sensors. |
The devices with deployed Cisco Cyber Vision configuration groups appear as active sensors in the Cisco Cyber Vision Center sensor list.