Cisco Catalyst SD-WAN Solution Integrations Guide, Releases 26.x and Later

PDF

Cisco Catalyst SD-WAN Solution Integrations Guide, Releases 26.x and Later

Feature history for Cisco unified communications voice services

Want to summarize with AI?

Log in

Provides the release history and descriptions of features for Cisco Unified Communications Voice Services on supported routers.


This reference provides the chronological development and feature additions for Cisco Unified Communications Voice Services, including release information and feature descriptions for each implementation milestone.

Table 1. Feature history

Feature Name

Release Information

Description

Cisco IP-based media services

Cisco IOS XE Catalyst SD-WAN Release 17.3.1a

Cisco vManage Release 20.3.1

You can now enable Cisco IP-based media services using a feature template.

Cisco Unified Communications Voice Services

Cisco IOS XE Catalyst SD-WAN Release 17.2.1r

This feature enables you to configure Cisco Unified Communications (UC) voice services on supported routers using feature templates and voice policies. When enabled, these routers can process calls for various endpoints, including voice ports, POTS dial peers, SIP dial peers, and phone profiles in Cisco Unified SRST mode.

You configure UC voice services from the Feature tab and the Voice Policy page for a supported device. To configure UC voice services, Cisco SD-WAN Manager must run Cisco vManage 20.1.1. This feature is supported on Cisco 4000 Series Integrated Services Routers.

DSP Farms for UC Voice Services with Workflow Library and Configuration Groups

Cisco IOS XE Catalyst SD-WAN Release 17.13.1a

Cisco Catalyst SD-WAN Manager Release 20.13.1

You can now configure DSP farms for UC voice services using the Workflow Library and configuration groups.