Cisco Catalyst SD-WAN Solution Integrations Guide, Releases 26.x and Later

PDF

Monitor onboarded Cisco ThousandEyes agents and configured tests

Updated: April 24, 2026

Want to summarize with AI?

Log in

Configure monitoring of Cisco ThousandEyes agents and tests using the monitoring dashboard in SD-WAN Manager.

You can monitor the status of Cisco ThousandEyes agents and configured tests in the SD-WAN Manager.

This task helps you track the operational status of your ThousandEyes deployment and view configured tests through the monitoring dashboard interface.

Before you begin

Ensure you are on release Cisco Catalyst SD-WAN Manager Release 20.16.1 and Cisco IOS XE Catalyst SD-WAN Release 17.16.1a.

Follow these steps to monitor onboarded Cisco ThousandEyes agents and configured tests:

Procedure

SUMMARY STEPS

  1. To monitor the status of Cisco ThousandEyes agents and configured tests in the SD-WAN Manager monitoring dashboard, navigate to Tools > ThousandEyes Monitoring.
  2. In the monitoring dashboard, review these sections:

DETAILED STEPS

1.

To monitor the status of Cisco ThousandEyes agents and configured tests in the SD-WAN Manager monitoring dashboard, navigate to Tools > ThousandEyes Monitoring.

You can view the online, offline, and disabled agents, and launch Cisco ThousandEyes from the dashboard.
2.

In the monitoring dashboard, review these sections:

  • Tests: View information about the tests configured using the simplified workflow.

  • Agents: View information about the status of Cisco ThousandEyes agents configured using the simplified workflow. It also provides a list of configured devices and sites for the test with the option to enable, disable, or delete a Cisco ThousandEyes agent.

You can now view the status of all ThousandEyes agents and tests, including online, offline, and disabled agents, through the monitoring dashboard interface.