Outlines the requirements that must be met before integrating Cisco Cyber Vision with your network devices.
Cisco cyber vision center version
Requirement: Use Cisco Cyber Vision Center Release 5.0.0 or later
Network reachability to Cisco cyber vision center
Requirement: Ensure that devices in the network have network reachability to Cisco Cyber Vision Center before deploying a configuration group that includes the Cisco Cyber Vision feature.
-
Because of this requirement, configuring devices to work with Cisco Cyber Vision Center is a two-step process:
-
Deploy a configuration group to a set of devices to establish reachability to Cisco Cyber Vision Center first, then deploy a configuration group to enable Cisco Cyber Vision on the devices.
-
After you confirm reachability, you can modify the same configuration group that you used in that step, adding the Cisco Cyber Vision feature, and deploy the configuration group to the devices.
-
This same requirement applies when you add devices to a configuration group that has the Cisco Cyber Vision feature and that you have deployed to devices already. If you want to deploy the configuration group to additional devices, first establish reachability to Cisco Cyber Vision Center for the additional devices.
Virtual port groups
Requirement: Ensure that virtual port group (VPG) interfaces 5 and 6 are available for the Cisco Cyber Vision application and are not configured for use with a different application.