Multihoming in a BGP EVPN VXLAN Fabric Configuration Guide, Cisco IOS XE 26.x.x and Later
Is this helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users.Log in
Important. Results generated by AI. Before using results, verify accuracy and completeness.
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Launch error Something went wrong. Please try again.
Updated: April 10, 2026
Want to summarize with AI?
Log inImportant. Results generated by AI. Before using results, verify accuracy and completeness.
Guidelines to follow when planning DAG bridged overlay networks.
Follow these guidelines when planning for DAG bridged overlay networks.
Extended bridge-domain boundaries build larger Layer 2 flood domains.
The DAG bridge mode is suggested for the deployment of selective VLANs or subnets based on technical requirements, such as non-IP and silent hosts.
Refer to the downstream Layer 2 network access device product datasheet to determine the MAC address scale numbers.
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.