Multihoming in a BGP EVPN VXLAN Fabric Configuration Guide, Cisco IOS XE 26.x.x and Later

PDF

Multihoming in a BGP EVPN VXLAN Fabric Configuration Guide, Cisco IOS XE 26.x.x and Later

Cisco Catalyst 9000 Series platform support matrix

Updated: April 10, 2026

Want to summarize with AI?

Overview

Explains the platform support modes for EVPN multihoming.

EVPN multihoming is supported on a wide range of modular and fixed Cisco Catalyst 9000 series switch models. The system can be deployed in standalone or resilient mode, providing single network and device-level redundancy.

This table provides a list of supported Cisco Catalyst 9000 series platforms with the system mode.

Table 1. EVPN multihoming platform support matrix
	Cisco Catalyst 9000 series switch model	System mode
Modular platforms	Catalyst 9400 Series Supervisor 1 Catalyst 9400 Series Supervisor 2 Catalyst 9400 Series Supervisor 2XL Catalyst 9600 Supervisor 1	Single supervisor: non-redundant Dual supervisor: redundant
Fixed platforms	Catalyst 9300 Series	Standalone: non-redundant StackWise: redundant
Fixed platforms	Catalyst 9500 High Performance Series	Standalone: non-redundant

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.