S Commands

sampling

sampling sampling_range | no sampling

Syntax Description

no

Negate a command or set its defaults
sampling

Set the sampling range for SPAN packets Not available in this release.
sampling_range

Type: integer

min: 2  max: 1023  

Sampling range: N = every Nth packet will be spanned

Command Modes

  • /exec/configure/monitor-local-src
  • /exec/configure/config-monitor
  • /exec/configure/config-monitor-erspan-src

save

save uri0

Syntax Description

save

Save the current configuration session to uri
uri0

Type: uri

Enter the complete uri where the session is to be stored

Command Modes

  • /exec/configure

scale-factor module

[no] scale-factor sf-value module module-number

Syntax Description

no

Negate a command or set its defaults
scale-factor

Scale factor
sf-value

Type: float

Specify scale factor value from 0.10 to 2.00
module

Module
module-number

Type: integer-mrange

specify module number

Command Modes

  • /exec/configure/ctrl-plane

scheduler aaa-authentication password 0

scheduler aaa-authentication { password { 0 s0 | 7 s1 | s2 } | username s3 password { 01 s4 | 71 s5 | s6 } } | no scheduler aaa-authentication { password [ 0 s0 | 7 s1 | s2 ] | username s3 password [ 01 s4 | 71 s5 | s6 ] }

Syntax Description

no

Negate a command or set its defaults
scheduler

Config commands for scheduler
aaa-authentication

Password for AAA authentication(of logged in user)
password

Specify the password of logged in user(for AAA authentication)
0

Password (clear text) of logged in user
s0

Type: string

length: 64

password (clear text) of logged in user
7

Encrypted password of logged in user
s1

Type: string

length: 64

Encrypted password (for AAA authentication)
s2

Type: string

length: 64

Password (clear text) of logged in user
username

logged in user name
s3

Type: string

length: 32

user name (for AAA authentication)
password

Specify the password of logged in user(for AAA authentication)
01

Password (clear text) of logged in user
s4

Type: string

length: 64

password (clear text) of logged in user
71

Encrypted password of logged in user
s5

Type: string

length: 64

Encrypted password (for AAA authentication)
s6

Type: string

length: 64

Password (clear text) of logged in user

Command Modes

  • /exec/configure

scheduler enable

[no] scheduler enable

Syntax Description

no

Negate a command or set its defaults
scheduler

Config commands for scheduler
enable

Command to enable/disable features

Command Modes

  • /exec/configure

scheduler job name

[no] scheduler job name s0

Syntax Description

no

Negate a command or set its defaults
scheduler

Config commands for scheduler
job

Define a job
name

Specify a name for the job
s0

Type: string

length: 31

Name of the job

Command Modes

  • /exec/configure

scheduler logfile size

scheduler logfile size i0 | no scheduler logfile size [i0]

Syntax Description

no

Negate a command or set its defaults
scheduler

Config commands for scheduler
logfile

Scheduler log file configuration
size

Specify the log file size
i0

Type: integer

min: 16  max: 1024  

Size of the file in KB

Command Modes

  • /exec/configure

scheduler schedule name

[no] scheduler schedule name s0

Syntax Description

no

Negate a command or set its defaults
scheduler

Config commands for scheduler
schedule

Define a schedule
name

Specify a name for the schedule
s0

Type: string

length: 31

Name of the schedule

Command Modes

  • /exec/configure

scheduler transport email from

scheduler transport email { from s0 | reply-to s1 | smtp-server host0 [ port i1 ] } | no scheduler transport email { from | reply-to | smtp-server }

Syntax Description

no

Negate a command or set its defaults
scheduler

Config commands for scheduler
transport

Configure transport related configuration
email

Configure email transport related configuration
from

Configure from email address
s0

Type: string

length: 255

Provide from email address, example: SJ-9500-1@xyz.com
reply-to

Configure replyto email address
s1

Type: string

length: 255

Provide reply-to email address, example: admin@xyz.com
smtp-server

Configure SMTP server address
host0

Type: string

SMTP server(DNS name or IPv4 or IPv6 address)
port

Configure SMTP server port (default:25)
i1

Type: integer

min: 1  max: 65535  

SMTP server port

Command Modes

  • /exec/configure

scp (security_tree)

scp [recurse] [directory] [verbose] to [hyphen] dst-path

Syntax Description

scp

Launch scp subsystem
recurse

Type: string

pattern: -r

-r recurse
directory

Type: string

pattern: -d

-d directory
verbose

Type: string

pattern: -v

-v verbose
to

Type: string

pattern: -t

-t scp to
hyphen

Type: string

pattern: --

--
dst-path

Type: uri

to URL

Command Modes

  • /exec

scp (security_tree)

scp [recurse] from [hyphen] src-path

Syntax Description

scp

Launch scp subsystem
recurse

Type: string

pattern: -r

-r recurse
from

Type: string

pattern: -f

-f scp from
hyphen

Type: string

pattern: --

--
src-path

Type: uri

from URL

Command Modes

  • /exec

scripting tcl init

scripting tcl init uri0 | no scripting tcl init

Syntax Description

no

Negate a command or set its defaults
scripting

Configure scripting parameters
tcl

Specify scripting parameter for tcl

init

Specify init parameters

uri0

Type: uri

Tcl init script name

Command Modes

  • /exec

scripting tcl recursion-limit

scripting tcl recursion-limit limit | no scripting tcl recursion-limit

Syntax Description

no

Negate a command or set its defaults
scripting

Configure scripting parameters
tcl

Specify scripting parameter for tcl
recursion-limit

Specify recursion-limit
limit

Type: uinteger

min: 10  max: 65534  default: 1000

Specify limit

Command Modes

  • /exec

section

" | " section pattern

Syntax Description

|

Pipe command output to filter
section

show lines that include the pattern as well as the subsequent lines that are more indented than matching line
pattern

Type: string

the pattern (regular expression) to match

Command Modes

  • /output

sed

" | " sed [-n] + expr

Syntax Description

|

Pipe command output to filter
sed

Stream Editor
-n

suppress automatic printing of pattern space
expr

Type: string

Edition command (script)

Command Modes

  • /output

send-community

[ no | default ] send-community [ both | extended | standard ]

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
send-community

Send Community attribute to this neighbor
both

Send Standard and Extended Community attributes
extended

Send Extended Community attribute
standard

Send Standard Community attribute

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

send-lifetime local

send-lifetime [local] stime { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } sday syear { duration dsec | infinite | etime { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } eday eyear } | no send-lifetime [ [local] stime { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } sday syear { duration dsec | infinite | etime { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } eday eyear } ]

Syntax Description

no

Negate a command or set its defaults
send-lifetime

Set send lifetime of key
local

Specify time in local timezone
stime

Type: string

pattern: (0?[0-9] | 1[0-9] | 2[0-3]):([0-5]?[0-9]):([0-5]?[0-9])

length: 8

HH:MM:SS Time to start <0-23>:<0-59>:<0-59>
etime

Type: string

pattern: (0?[0-9] | 1[0-9] | 2[0-3]):([0-5]?[0-9]):([0-5]?[0-9])

length: 8

HH:MM:SS Time to end <0-23>:<0-59>:<0-59>
month_a
month_b
month_c
month_d
month_e
month_f
month_g
month_h
month_i
month_j
month_k
month_l
sday

Type: integer

min: 1  max: 31  

Day of the month to start
eday

Type: integer

min: 1  max: 31  

Day of the month to end
syear

Type: integer

min: 1993  max: 2035  

Year to start
eyear

Type: integer

min: 1993  max: 2035  

Year to end
duration

Set key lifetime duration
dsec

Type: integer

min: 1  max: 2147483646  

Duration in seconds
infinite

Never Expires

Command Modes

  • /exec/configure/keychain-key

send

send line

Syntax Description

send

Send message to open sessions
line

Type: remainder

Send message (a line) to all open sessions

Command Modes

  • /exec

send session

send session s0 line

Syntax Description

send

Send message to open sessions
session

Send message to specific session
s0

Type: string

Specify pts/tty device type
line

Type: remainder

Enter a one line message

Command Modes

  • /exec

serial

serial chas-ser | no serial

Syntax Description

no

Negate the command
serial

Chassis serial number
chas-ser

Type: string

length: 20

Serial number

Command Modes

  • /exec/configure/fex

server (ldap_tree)

[no] server host0

Syntax Description

no

Negate a command or set its defaults
server

LDAP server name
host0

Type: string

LDAP server name

Command Modes

  • /exec/configure/ldap

server (radius_tree)

[no] server hostipname

Syntax Description

no

Negate a command or set its defaults
server

RADIUS server name or IP address
hostipname

Type: nameorip

IPV4/IPV6 address or DNS name

Command Modes

  • /exec/configure/radius

server (tacacs_dynamic_tree)

[no] server hostipname

Syntax Description

no

Negate a command or set its defaults
server

TACACS+ server name or IP address
hostipname

Type: nameorip

IPV4/IPV6 address or DNS name

Command Modes

  • /exec/configure/tacacs+

service-policy (qosmgr)

[no] service-policy [ type qos ] inp-or-out pmap-name-qos [no-stats]

Syntax Description

no

Negate a command or set its defaults
service-policy

Configure service policy for an interface
type

Specify the type of this policy
qos

Qos policy
inp-or-out
input  value: 1
Input Service Policy
output  value: 2
Output Service Policy
pmap-name-qos

Type: string

antipattern: type | typ | ty | t

length: 40

Policy-map name __nil__ You must create a policy-map before using this command
no-stats

Disable statistics for this policy

Command Modes

  • /exec/configure/vlan

service-policy (qosmgr)

[no] service-policy [ type qos ] pmap-name-qos

Syntax Description

no

Negate a command or set its defaults
service-policy

Configure hierarchial policy-map Not available in this release.
type

Specify the type of this policy
qos

Qos policy
pmap-name-qos

Type: string

antipattern: type | typ | ty | t

length: 40

Policy-map name

Command Modes

  • /exec/configure/policy-map/class

service-policy (qosmgr)

[no] service-policy [ type qos ] pmap-name

Syntax Description

no

Negate a command or set its defaults

service-policy (qosmgr)

[no] service-policy [ type qos ] inp-or-out pmap-name-qos [no-stats]

Syntax Description

no

Negate a command or set its defaults
service-policy

Configure service policy for an interface
type

Specify the type of this policy
qos

Qos policy
inp-or-out
input  value: 1
Input Service Policy
output  value: 2
Output Service Policy
pmap-name-qos

Type: string

antipattern: type | typ | ty | t

length: 40

Policy-map name __nil__ You must create a policy-map before using this command
no-stats

Disable statistics for this policy

Command Modes

  • /exec/configure/if-set-qos

service-policy input

[no] service-policy input policy_name

Syntax Description

no

Negate a command or set its defaults
service-policy

Attach a policy to control-plane interface
input

Input the policy name
policy_name

Type: string

antipattern: copp-system-p-+(([a-zA-Z0-9] | [- | . | _])*)

length: 64

Name of the policy

Command Modes

  • /exec/configure/ctrl-plane

service-policy type network-qos

[no] service-policy type network-qos pmap-name-nq

Syntax Description

no

Negate a command or set its defaults
service-policy

Policy Map
type

Specify the type of this policy-map
network-qos

Network QoS policy
pmap-name-nq

Type: string

antipattern: type | typ | ty | t

length: 40

Policy-map name

Command Modes

  • /exec/configure/system/qos

service-policy type queuing (qosmgr)

[no] service-policy type queuing pmap-name-que

Syntax Description

no

Negate a command or set its defaults
service-policy

Set the inner policy-map Not available in this release.
type

Specify the type of this policy
queuing

Queuing policy
pmap-name-que

Type: string

antipattern: type | typ | ty | t

length: 40

Policy-map name __nil__ You must create a policy-map before using this command

Command Modes

  • /exec/configure/policy-map/type/queuing/class

service-policy type queuing (qosmgr)

[no] service-policy type queuing inp-or-out pmap-name-que [no-stats]

Syntax Description

no

Negate a command or set its defaults
service-policy

Configure service policy for an interface
type

Specify the type of this policy
queuing

Queuing policy
inp-or-out
input  value: 1
Input Service Policy
output  value: 2
Output Service Policy
pmap-name-que

Type: string

antipattern: type | typ | ty | t

length: 40

Policy-map name
no-stats

Disable statistics for this policy

Command Modes

  • /exec/configure/if-set-que

service-policy type queuing (qosmgr_dce)

[no] service-policy type queuing inp-or-out pmap-name-que

Syntax Description

no

Negate a command or set its defaults
service-policy

Policy Map
type

Specify the type of this policy-map
queuing

DCE Queuing policy
inp-or-out
output  value: 2
Output Service Policy
pmap-name-que

Type: string

antipattern: type | typ | ty | t

length: 40

Policy-map name

Command Modes

  • /exec/configure/system/qos

service dhcp

[no] service dhcp

Syntax Description

no

Negate a command or set its defaults
service

Modify use of network based services
dhcp

Enable DHCP relay agent

Command Modes

  • /exec/configure

service set

[no] service set onep-service-set

Syntax Description

no

Negate a command or set its defaults
service

ONEP service set
set

ONEP service set
onep-service-set

Type: string

service name

Command Modes

  • /exec/configure/onep

service unsupported-transceiver

[no] service unsupported-transceiver

Syntax Description

no

Negate a command or set its defaults
service

Serviceability Commands
unsupported-transceiver

Configure support for transceivers not supported by Cisco

Command Modes

  • /exec/configure

session-limit

[no] session-limit i0

Syntax Description

no

Negate a command or set its defaults
session-limit

Set the max no of concurrent vsh sessions
i0

Type: integer

min: 1  max: 64  

Max concurrent vsh sessions

Command Modes

  • /exec/configure/line

session domain-lookup

session domain-lookup | no session domain-lookup

Syntax Description

session

Configure session preferences
no

Negate a command or set its defaults

Command Modes

  • /exec

session max

session max onep-maxsess

Syntax Description

session

One Platform session
max

Maximum number of sessions
onep-maxsess

Type: uinteger

Number of sessions

Command Modes

  • /exec/configure/onep

set-attached-bit

[no] set-attached-bit

Syntax Description

no

Negate a command or set its defaults
set-attached-bit

Configure L1|L2 router to set/unset attached bit in its L1 LSP

Command Modes

  • /exec/configure/router-isis/router-isis-vrf-common
  • /exec/configure/router-isis/router-isis-af-ipv6

set (copp_cli)

[no] set { cos [inner] cos-val | dscp [tunnel] { dscp-val | opt_set_dscp } | precedence [tunnel1] { prec-val | opt_set_prec } }

Syntax Description

no

Negate a command or set its defaults
set

Set attribute
cos

IEEE 802.1Q class of service
inner

Set inner 802.1Q class of service in QinQ environment Not available in this release.
cos-val

Type: uinteger

min: 0  max: 7  

802.1Q Class of Service value
dscp

DSCP in IP(v4) and IPv6 packets Not available in this release.
tunnel

Set DSCP in tunnel encapsulation
dscp-val

Type: uinteger

min: 0  max: 63  

DSCP value
opt_set_dscp
af11  value: 10
AF11 dscp (001010)
af12  value: 12
AF12 dscp (001100)
af13  value: 14
AF13 dscp (001110)
af21  value: 18
AF21 dscp (010010)
af22  value: 20
AF22 dscp (010100)
af23  value: 22
AF23 dscp (010110)
af31  value: 26
AF31 dscp (011010)
af32  value: 28
AF32 dscp (011100)
af33  value: 30
AF33 dscp (011110)
af41  value: 34
AF41 dscp (100010)
af42  value: 36
AF42 dscp (100100)
af43  value: 38
AF43 dscp (100110)
cs1  value: 8
CS1(precedence 1) dscp (001000)
cs2  value: 16
CS2(precedence 2) dscp (010000)
cs3  value: 24
CS3(precedence 3) dscp (011000)
cs4  value: 32
CS4(precedence 4) dscp (100000)
cs5  value: 40
CS5(precedence 5) dscp (101000)
cs6  value: 48
CS6(precedence 6) dscp (110000)
cs7  value: 56
CS7(precedence 7) dscp (111000)
default  value: 0
default dscp (000000)
ef  value: 46
EF dscp (101110)
precedence

Precedence in IP(v4) and IPv6 packets Not available in this release.
tunnel1

Set DSCP in tunnel encapsulation
prec-val

Type: uinteger

min: 0  max: 7  

IP Precedence value
opt_set_prec
routine  value: 0
Routine precedence (0)
priority  value: 1
Priority precedence (1)
immediate  value: 2
Immediate precedence (2)
flash  value: 3
Flash precedence (3)
flash-override  value: 4
Flash override precedence (4)
critical  value: 5
Critical precedence (5)
internet  value: 6
Internetwork control precedence (6)
network  value: 7
Network control precedence (7)

Command Modes

  • /exec/configure/pmap/class

set (qosmgr)

[no] set { cos cos-val | dscp [tunnel] { dscp-val | dscp-enum } | precedence [prec-tunnel] { prec-val | prec-enum } | discard-class dis-class-val | qos-group qos-grp-val | { cos1 cos2 | dscp1 dscp2 | prec1 prec2 | dis-class1 dis-class2 | dscp3 mpls-exp-imposition | mpls-exp-topmost dscp4 | mpls-exp-topmost1 mpls-exp-topmost2 } table table-map-name | mpls experimental { topmost exp-value | imposition exp-value-imp } }

Syntax Description

no

Negate a command or set its defaults
set

Set attribute
cos

IEEE 802.1Q class of service
cos1

IEEE 802.1Q class of service
cos2

IEEE 802.1Q class of service
cos-val

Type: uinteger

min: 0  max: 7  

802.1Q Class of Service value
dscp

DSCP in IP(v4) and IPv6 packets
dscp1

DSCP in IP(v4) and IPv6 packets
dscp2

DSCP in IP(v4) and IPv6 packets
tunnel

Set DSCP in tunnel encapsulation
dscp-val

Type: uinteger

min: 0  max: 63  

DSCP value
dscp-enum
af11  value: 10
AF11 dscp (001010)
af12  value: 12
AF12 dscp (001100)
af13  value: 14
AF13 dscp (001110)
af21  value: 18
AF21 dscp (010010)
af22  value: 20
AF22 dscp (010100)
af23  value: 22
AF23 dscp (010110)
af31  value: 26
AF31 dscp (011010)
af32  value: 28
AF32 dscp (011100)
af33  value: 30
AF33 dscp (011110)
af41  value: 34
AF41 dscp (100010)
af42  value: 36
AF42 dscp (100100)
af43  value: 38
AF43 dscp (100110)
cs1  value: 8
CS1(precedence 1) dscp (001000)
cs2  value: 16
CS2(precedence 2) dscp (010000)
cs3  value: 24
CS3(precedence 3) dscp (011000)
cs4  value: 32
CS4(precedence 4) dscp (100000)
cs5  value: 40
CS5(precedence 5) dscp (101000)
cs6  value: 48
CS6(precedence 6) dscp (110000)
cs7  value: 56
CS7(precedence 7) dscp (111000)
default  value: 0
default dscp (000000)
ef  value: 46
EF dscp (101110)
precedence

Precedence in IP(v4) and IPv6 packets
prec1

Precedence in IP(v4) and IPv6 packets
prec2

Precedence in IP(v4) and IPv6 packets
prec-tunnel

Set Precedence in tunnel encapsulation
prec-val

Type: uinteger

min: 0  max: 7  

IP Precedence value
prec-enum
routine  value: 0
Routine precedence (0)
priority  value: 1
Priority precedence (1)
immediate  value: 2
Immediate precedence (2)
flash  value: 3
Flash precedence (3)
flash-override  value: 4
Flash override precedence (4)
critical  value: 5
Critical precedence (5)
internet  value: 6
Internetwork control precedence (6)
network  value: 7
Network control precedence (7)
discard-class

Discard class Not available in this release.
dis-class1

Discard class Not available in this release.
dis-class2

Discard class Not available in this release.
dis-class-val

Type: uinteger

min: 0  max: 63  

Discard class value
qos-group

Qos-group
qos-grp-val

Type: uinteger

min: 0  max: 3  

Qos-group value
table

Table defining mapping from input to output Not available in this release.
table-map-name

Type: string

Table-map name
mpls

Set MPLS label Not available in this release.
experimental

Set MPLS experimental label
topmost

Set MPLS topmost label
imposition

Push the label and set new one on top
exp-value

Type: uinteger

min: 0  max: 7  

MPLS value
exp-value-imp

Type: uinteger

min: 0  max: 7  

MPLS value
dscp3

DSCP in IP(v4) and IPv6 packets
mpls-exp-imposition

mpls-exp-imposition Not available in this release.
mpls-exp-topmost

mpls-exp-topmost Not available in this release.
dscp4

DSCP in IP(v4) and IPv6 packets
mpls-exp-topmost1

mpls-exp-topmost Not available in this release.
mpls-exp-topmost2

mpls-exp-topmost Not available in this release.

Command Modes

  • /exec/configure/policy-map/class

set (qosmgr_dce)

[no] set load-sharing per-packet

Syntax Description

set

Set attribute
load-sharing

Load sharing across ECMP by set out-of-order bit Not available in this release.
per-packet

per MiM packet
no

Negate a command or set its defaults

Command Modes

  • /exec/configure/policy-map/class

set as-path prepend last-as

set as-path { prepend { last-as lastas | as | + } | tag } | no set as-path { prepend [ last-as [lastas] | as | + ] | tag }

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
as-path

Prepend string for a BGP AS-path attribute
prepend

Prepend to the AS-Path
last-as

Prepend last AS to the as-path
lastas

Type: integer

min: 1  max: 10  

number of last-AS prepends
as

Type: asn

AS number
tag

Set the tag as an AS-path attribute

Command Modes

  • /exec/configure/route-map

set comm-list

set comm-list name delete | no set comm-list

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
comm-list

set BGP community list (for deletion)
name

Type: string

pattern: [!-~]*

length: 63

Community list name
delete

Delete matching communities

Command Modes

  • /exec/configure/route-map

set community additive internet local-AS no-advertise no-export none

set community { none | { additive | internet | local-AS | no-advertise | no-export | hex_num | number | community } | + } | no set community [ none | { additive | internet | local-AS | no-advertise | no-export | hex_num | number | community } | + ]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
community

Set BGP community attribute
additive

Add to existing community
internet

Internet (well-known community)
local-AS

Do not send outside local AS (well-known community)
no-advertise

Do not advertise to any peer (well-known community)
no-export

Do not export to next AS (well-known community)
none

No community attribute
number

Type: uinteger

min: 1  max: 4294967295  

Community number
hex_num

Type: hex

Community number in hex
community

Type: community

Community number aa:nn format

Command Modes

  • /exec/configure/route-map

set cos

[no] set cos cos-val

Syntax Description

no

Negate a command or set its defaults
set

Set attribute Not available in this release.
cos

IEEE 802.1Q class of service
cos-val

Type: uinteger

min: 0  max: 7  

802.1Q Class of Service value

Command Modes

  • /exec/configure/policy-map/type/queuing/class

set dampening

set dampening halflife reuse supress duration | no set dampening [ halflife reuse supress duration ]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
dampening

Set BGP route flap dampening parameters
halflife

Type: integer

min: 1  max: 45  

half-life time for the penalty
reuse

Type: integer

min: 1  max: 20000  

penalty to start reusing a route
supress

Type: integer

min: 1  max: 20000  

penalty to start suppressing a route
duration

Type: integer

min: 1  max: 255  

Maximum duration to suppress a stable route

Command Modes

  • /exec/configure/route-map

set distance

set distance external-dist [ internal-dist [local-dist] ] | no set distance

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
distance

Set the Administrative distance of route
external-dist

Type: uinteger

min: 1  max: 255  

Administrative distance for IGP or EBGP routes
internal-dist

Type: uinteger

min: 1  max: 255  

Administrative distance for internal routes
local-dist

Type: uinteger

min: 1  max: 255  

Administrative distance for local routes

Command Modes

  • /exec/configure/route-map

set extcomm-list

set extcomm-list name delete | no set extcomm-list [ name delete ]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
extcomm-list

set BGP extcommunity list (for deletion)
name

Type: string

pattern: [!-~]*

length: 63

Extended Community list name
delete

Delete matching extcommunities

Command Modes

  • /exec/configure/route-map

set extcommunity 4byteas-generic additive none transitive non-transitive

set extcommunity 4byteas-generic { { transitive ext-comm-gen-trans | non-transitive ext-comm-gen-nontrans } + [additive] | additive | none } | no set extcommunity 4byteas-generic [ { transitive ext-comm-gen-trans | non-transitive ext-comm-gen-nontrans } + [additive] | additive | none ]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
extcommunity

Set BGP extcommunity attribute
4byteas-generic

Generic extended community
additive

Add to existing generic extcommunity
none

No extcommunity generic attribute
transitive

Transitive extended community
non-transitive

Non-Transitive extended community
ext-comm-gen-trans

Type: community

Extcommunity number aa4:nn format
ext-comm-gen-nontrans

Type: community

Extcommunity number aa4:nn format
ext-comm-gen-trans

Type: additive

<ext-comm-gen-nontrans>

Command Modes

  • /exec/configure/route-map

set extcommunity additive none

set extcommunity { additive | none } | no set extcommunity [ additive | none ]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
extcommunity

Set BGP extcommunity attribute
additive

Add to existing generic extcommunity
none

No extcommunity attribute

Command Modes

  • /exec/configure/route-map

set extcommunity cost igp pre-bestpath

set extcommunity cost [ igp | pre-bestpath ] comm-id cost-value + | no set extcommunity cost [ [ igp | pre-bestpath ] comm-id cost-value ] +

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
extcommunity

Set BGP extcommunity attribute
cost

Cost
igp

Compare following IGP cost comparison
pre-bestpath

Compare before all other steps in bestpath calculation
comm-id

Type: uinteger

min: 0  max: 255  

Community ID
cost-value

Type: uinteger

min: 0  max: 4294967295  

Cost Community value

Command Modes

  • /exec/configure/route-map

set extcommunity rt additive

set extcommunity rt { { ext-comm-rt-aa2nn4 | ext-comm-rt-aa4nn2 } + [additive] | additive } | no set extcommunity rt [ { ext-comm-rt-aa2nn4 | ext-comm-rt-aa4nn2 } + [additive] | additive ]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
extcommunity

Set BGP extcommunity attribute
rt

Route-Target
additive

Add to existing rt extcommunity
ext-comm-rt-aa2nn4

Type: community

Extcommunity number
ext-comm-rt-aa4nn2

Type: community

Extcommunity number
ext-comm-rt-aa2nn4

Type: additive

<ext-comm-rt-aa4nn2>

Command Modes

  • /exec/configure/route-map

set forwarding-address

[no] set forwarding-address

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
forwarding-address

Set the forwarding address

Command Modes

  • /exec/configure/route-map

set interface

[no] set interface iface

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
interface

Output interface
iface

Type: interface

Interface name

Command Modes

  • /exec/configure/route-map

set ip address prefix-list

[no] set ip address prefix-list name

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ip

Configure IP features
address

Specify IP address
prefix-list

IP prefix-list
name

Type: string

pattern: [!-~]*

length: 63

Name of prefix list

Command Modes

  • /exec/configure/route-map

set ip default next-hop

[no] set ip default next-hop [recursive] { load-share | addr1+ [load-share] }

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ip

Configure IP features
recursive

Use recursive lookup
default

Set default next-hop
next-hop

Next hop address
addr1

Type: ipaddr

IP address of next hop
load-share

Enables load sharing

Command Modes

  • /exec/configure/route-map

set ip default next-hop verify-availability

[no] set ip default next-hop verify-availability addr [ track object_id ] [load-share]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ip

Configure IP features
default

Set default next-hop
next-hop

Next hop address
verify-availability

Verify the reachability of the tracked object
addr

Type: ipaddr

IP address of next hop
track

The tracking method is track
object_id

Type: integer

min: 1  max: 500  

Object number that the tracking subsystem is tracking
load-share

Enables load sharing

Command Modes

  • /exec/configure/route-map

set ip next-hop

[no] set ip next-hop [recursive] { load-share | addr1+ [load-share] }

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ip

Configure IP features
recursive

Use recursive lookup
next-hop

Next hop address
addr1

Type: ipaddr

IP address of next hop
load-share

Enables load sharing

Command Modes

  • /exec/configure/route-map

set ip next-hop peer-address

[no] set ip next-hop peer-address

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ip

Configure IP features
next-hop

Next hop address
peer-address

Use peer address (for BGP only)

Command Modes

  • /exec/configure/route-map

set ip next-hop unchanged

[no] set ip next-hop unchanged

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ip

Configure IP features
next-hop

Next hop address
unchanged

Use unchanged address (for BGP only)

Command Modes

  • /exec/configure/route-map

set ip precedence

set ip precedence { value | name } | no set ip precedence [ value | name ]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ip

Configure IP features
precedence

Set precedence field
value

Type: integer

min: 0  max: 7  

Precedence value
name

Precedence value

routine  value: 0
Set routine precedence (0)
priority  value: 1
Set priority precedence (1)
immediate  value: 2
Set immediate precedence (2)
flash  value: 3
Set flash precedence (3)
flash-override  value: 4
Set flash override precedence (4)
critical  value: 5
Set critical precedence (5)
internet  value: 6
Set internetwork control precedence (6)
network  value: 7
Set network control precedence (7)

Command Modes

  • /exec/configure/route-map

set ipv6 address prefix-list

[no] set ipv6 address prefix-list name

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ipv6

Configure IPv6 features
address

Specify IP address
prefix-list

IPv6 prefix-list
name

Type: string

pattern: [!-~]*

length: 63

Name of prefix list

Command Modes

  • /exec/configure/route-map

set ipv6 default next-hop

[no] set ipv6 default next-hop [recursive] { load-share | addr1+ [load-share] }

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ipv6

Configure IPv6 features
recursive

Use recursive lookup
default

Set default next-hop
next-hop

Next hop address
addr1

Type: ipv6addr

IPv6 address of next hop
load-share

Enables load sharing

Command Modes

  • /exec/configure/route-map

set ipv6 default next-hop verify-availability

[no] set ipv6 default next-hop verify-availability addr [ track object_id ] [load-share]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ipv6

Configure IPv6 features
next-hop

Next hop address
default

Set default next-hop
verify-availability

Verify the reachability of the tracked object
addr

Type: ipv6addr

IP address of next hop
track

The tracking method is track
object_id

Type: integer

min: 1  max: 500  

Object number that the tracking subsystem is tracking
load-share

Enables load sharing

Command Modes

  • /exec/configure/route-map

set ipv6 next-hop

[no] set ipv6 next-hop { load-share | addr+ [load-share] }

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ipv6

Configure IPv6 features
next-hop

Next hop ipv6 address
addr

Type: ipv6addr

IPv6 address of next hop
load-share

Enables load sharing

Command Modes

  • /exec/configure/route-map

set ipv6 next-hop peer-address

[no] set ipv6 next-hop peer-address

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ipv6

Configure IPv6 features
next-hop

Next hop address
peer-address

Use peer address (for BGP only)

Command Modes

  • /exec/configure/route-map

set ipv6 next-hop unchanged

[no] set ipv6 next-hop unchanged

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ipv6

Configure IPv6 features
next-hop

Next hop address
unchanged

Use unchanged address (for BGP only)

Command Modes

  • /exec/configure/route-map

set ipv6 next-hop verify-availability

[no] set ipv6 next-hop verify-availability addr [ track object_id ] [load-share]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ipv6

Configure IPv6 features
next-hop

Next hop address
verify-availability

Verify the reachability of the tracked object
addr

Type: ipv6addr

IP address of next hop
track

The tracking method is track
object_id

Type: integer

min: 1  max: 500  

Object number that the tracking subsystem is tracking
load-share

Enables load sharing

Command Modes

  • /exec/configure/route-map

set ipv6 precedence

set ipv6 precedence { value | name } | no set ipv6 precedence [ value | name ]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
ipv6

Configure IPv6 features
precedence

Set precedence field
value

Type: integer

min: 0  max: 7  

Precedence value
name

Precedence value

routine  value: 0
Set routine precedence (0)
priority  value: 1
Set priority precedence (1)
immediate  value: 2
Set immediate precedence (2)
flash  value: 3
Set flash precedence (3)
flash-override  value: 4
Set flash override precedence (4)
critical  value: 5
Set critical precedence (5)
internet  value: 6
Set internetwork control precedence (6)
network  value: 7
Set network control precedence (7)

Command Modes

  • /exec/configure/route-map

set level level-1 level-1-2 level-2

set level { level-1 | level-1-2 | level-2 } | no set level [ level-1 | level-1-2 | level-2 ]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
level

Where to import route
level-1

Import into a level-1 area
level-1-2

Import into level-1 and level-2
level-2

Import into level-2 sub-domain

Command Modes

  • /exec/configure/route-map

set local-preference

set local-preference pref | no set local-preference [pref]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
local-preference

BGP local preference path attribute
pref

Type: uinteger

min: 0  max: 4294967295  

Preference value

Command Modes

  • /exec/configure/route-map

set metric

set metric metric0 [ metric1 metric2 metric3 metric4 ] | no set metric [ metric0 [ metric1 metric2 metric3 metric4 ] ]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
metric

Set metric for destination routing protocol
metric0

Type: string

pattern: ^[0-9\+\-][0-9]*$

length: 11

[+/-] Metric value or Bandwidth in Kbits per second
metric1

Type: uinteger

min: 1  max: 4294967295  

IGRP delay metric
metric2

Type: integer

min: 0  max: 255  

IGRP reliability metric where 255 is 100% reliable
metric3

Type: integer

min: 1  max: 255  

IGRP Effective bandwidth metric (Loading) 255 is 100%
metric4

Type: uinteger

min: 1  max: 16777215  

IGRP MTU of the path

Command Modes

  • /exec/configure/route-map

set mpls-exp-topmost cos table exp-cos-map

[no] set mpls-exp-topmost cos table exp-cos-map

Syntax Description

no

Negate a command or set its defaults
set

Set attribute Not available in this release.
mpls-exp-topmost

MPLS experimental topmost Not available in this release.
cos

IEEE 802.1Q class of service
table

Table map Not available in this release.
exp-cos-map

Exp to cos table map name (reserved)

Command Modes

  • /exec/configure/policy-map/type/queuing/class

set nssa-only

[no] set nssa-only

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
nssa-only

OSPF NSSA Areas

Command Modes

  • /exec/configure/route-map

set origin egp

set origin { egp [as] | igp | incomplete } | no set origin [ egp [as] | igp | incomplete ]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
origin

BGP origin code
egp

remote EGP
as

Type: asn

AS number
igp

local IGP
incomplete

unknown heritage

Command Modes

  • /exec/configure/route-map

set path-selection all advertise

[no] set path-selection all advertise

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
path-selection

Path selection criteria for BGP
all

Specifies all BGP Paths
advertise

Advertise add paths to its peers if receive capability enabled

Command Modes

  • /exec/configure/route-map

set tag

set tag value | no set tag [value]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
tag

Tag value for destination routing protocol
value

Type: uinteger

min: 0  max: 4294967295  

Tag value

Command Modes

  • /exec/configure/route-map

set weight

set weight count | no set weight [count]

Syntax Description

no

Negate a command or set its defaults
set

Set values in destination routing protocol
weight

BGP weight for routing table
count

Type: integer

min: 0  max: 65535  

Weight value

Command Modes

  • /exec/configure/route-map

setup

setup

Syntax Description

setup

Run the basic SETUP command facility

Command Modes

  • /exec

shape

[no] shape { [average] { avg-rate [ bps | kbps | mbps | gbps ] | percent percentage } | min { min-rate [ bps2 | kbps2 | mbps2 | gbps2 | pps2 ] | percent2 percentage2 } max { max-rate [ bps3 | kbps3 | mbps3 | gbps3 | pps3 ] | percent3 percentage3 } }

Syntax Description

no

Negate a command or set its defaults
shape

shape
average

Configure average shape rate
avg-rate

Type: long

Target bit rate
min

Configure minimum shape rate
min-rate

Type: long

Target bit rate
max

Configure maximum shape rate
max-rate

Type: long

Target bit rate
bps

Bits per second
kbps

Kilo bits per second
mbps

Mega bits per second
gbps

Giga bits per second
pps

Packets per second
bps2

Bits per second
kbps2

Kilo Bits per second
mbps2

Mega Bits per second
gbps2

Giga Bits per second
pps2

Packets per second
bps3

Bits per second
kbps3

Kilo Bits per second
mbps3

Mega Bits per second
gbps3

Giga Bits per second
pps3

Packets per second
percent

Specify rate as percentage of interface data-rate
percent2

Specify rate as percentage of interface data-rate
percent3

Specify rate as percentage of interface data-rate
percentage

Type: uinteger

min: 1  max: 100  

Percentage
percentage2

Type: uinteger

min: 1  max: 100  

Percentage
percentage3

Type: uinteger

min: 1  max: 100  

Percentage

Command Modes

  • /exec/configure/policy-map/type/queuing/class

shared-policer

qos shared-policer [ type qos ] policer-name [cir] { cir-val [ bps | kbps | mbps | gbps | pps ] | percent cir-perc } [ [bc] committed-burst [ bytes | kbytes | mbytes | ms | us | packets ] ] [ pir { pir-val [ bps2 | kbps2 | mbps2 | gbps2 | pps2 ] | percent pir-perc } [ [be] extended-burst [ bytes2 | kbytes2 | mbytes2 | ms2 | us2 | packets2 ] ] ] [ conform { transmit | set-prec-transmit { prec-val | prec-enum } | set-dscp-transmit { dscp-val | dscp-enum } | set-cos-transmit cos-val | set-discard-class-transmit disc-class-val | set-qos-transmit qos-grp-val | set-mpls-exp-imposition-transmit exp-value-imp | set-mpls-exp-topmost-transmit exp-value-top } [ exceed { drop1 | set exc-frm-field exc-to-field table cir-markdown-map | set-prec-transmit1 { prec-val1 | prec-enum1 } | set-dscp-transmit1 { dscp-val1 | dscp-enum1 } | set-cos-transmit1 cos-val1 | set-discard-class-transmit1 disc-class-val1 | set-qos-transmit1 qos-grp-val1 | set-mpls-exp-imposition-transmit1 exp-value-imp1 | set-mpls-exp-topmost-transmit1 exp-value-top1 } ] [ violate { drop2 | set vio-frm-field vio-to-field table2 pir-markdown-map | set-prec-transmit2 { prec-val2 | prec-enum2 } | set-dscp-transmit2 { dscp-val2 | dscp-enum2 } | set-cos-transmit2 cos-val2 | set-discard-class-transmit2 disc-class-val2 | set-qos-transmit2 qos-grp-val2 | set-mpls-exp-imposition-transmit2 exp-value-imp2 | set-mpls-exp-topmost-transmit2 exp-value-top2 } ] ] | no qos shared-policer [ type qos ] policer-name

Syntax Description

no

Negate a command or set its defaults
shared-policer

Shared policer Not available in this release.
policer-name

Type: string

length: 40

Shared policer name
type

Specify the type of shared-policer
qos

QoS Global Commands
qos

QoS Global Commands
cir

Specify committed information rate
cir-val

Type: long

Committed Information Rate value in bps/kbps/mbps/gbps/pps
bc

Specify committed burst
committed-burst

Type: long

Committed Burst value in bytes/kbytes/mbytes/ms/us/packets
percent

Specify rate as percentage of interface data-rate
cir-perc

Type: uinteger

min: 1  max: 100  

Percentage
pir-perc

Type: uinteger

min: 1  max: 100  

Percentage
pir

Specify peak information rate
pir-val

Type: long

Peak Information Rate value in bps/kbps/mbps/gbps/pps
be

Specify extended burst (for 1R3C meter)
extended-burst

Type: long

Value of extended burst in bytes/kbytes/mbytes/ms/us/packets
bps

Bits per second
kbps

Kilo bits per second
mbps

Mega bits per second
gbps

Giga bits per second
pps

Packets per second
bps2

Bits per second
kbps2

Kilo Bits per second
mbps2

Mega Bits per second
gbps2

Giga Bits per second
pps2

Packets per second
bytes

Bytes
kbytes

Kilo bytes
mbytes

Mega bytes
us

Micro second(s)
ms

Milli second(s)
packets

Packets
bytes2

Bytes
kbytes2

Kilo Bytes
mbytes2

Mega Bytes
ms2

Milli seconds
us2

Micro seconds
packets2

Packets
conform

Specify a conform action
exceed

Specify a exceed action
violate

Specify a violate action
transmit

Transmit packet
drop1

Drop packet
drop2

Drop packet
set-prec-transmit

Set precedence and send it
set-prec-transmit1

Set precedence and send it
set-prec-transmit2

Set precedence and send it
prec-val

Type: uinteger

min: 0  max: 7  

Precedence value
prec-val1

Type: uinteger

min: 0  max: 7  

Precedence value
prec-val2

Type: uinteger

min: 0  max: 7  

Precedence value
prec-enum
routine  value: 0
Routine precedence (0)
priority  value: 1
Priority precedence (1)
immediate  value: 2
Immediate precedence (2)
flash  value: 3
Flash precedence (3)
flash-override  value: 4
Flash override precedence (4)
critical  value: 5
Critical precedence (5)
internet  value: 6
Internetwork control precedence (6)
network  value: 7
Network control precedence (7)
prec-enum1
routine  value: 0
Routine precedence (0)
priority  value: 1
Priority precedence (1)
immediate  value: 2
Immediate precedence (2)
flash  value: 3
Flash precedence (3)
flash-override  value: 4
Flash override precedence (4)
critical  value: 5
Critical precedence (5)
internet  value: 6
Internetwork control precedence (6)
network  value: 7
Network control precedence (7)
prec-enum2
routine  value: 0
Routine precedence (0)
priority  value: 1
Priority precedence (1)
immediate  value: 2
Immediate precedence (2)
flash  value: 3
Flash precedence (3)
flash-override  value: 4
Flash override precedence (4)
critical  value: 5
Critical precedence (5)
internet  value: 6
Internetwork control precedence (6)
network  value: 7
Network control precedence (7)
set-dscp-transmit

Set dscp and send it
set-dscp-transmit1

Set dscp and send it
set-dscp-transmit2

Set dscp and send it
dscp-val

Type: uinteger

min: 0  max: 63  

DSCP value
dscp-val1

Type: uinteger

min: 0  max: 63  

DSCP value
dscp-val2

Type: uinteger

min: 0  max: 63  

DSCP value
dscp-enum
af11  value: 10
AF11 dscp (001010)
af12  value: 12
AF12 dscp (001100)
af13  value: 14
AF13 dscp (001110)
af21  value: 18
AF21 dscp (010010)
af22  value: 20
AF22 dscp (010100)
af23  value: 22
AF23 dscp (010110)
af31  value: 26
AF31 dscp (011010)
af32  value: 28
AF32 dscp (011100)
af33  value: 30
AF33 dscp (011110)
af41  value: 34
AF41 dscp (100010)
af42  value: 36
AF42 dscp (100100)
af43  value: 38
AF43 dscp (100110)
cs1  value: 8
CS1(precedence 1) dscp (001000)
cs2  value: 16
CS2(precedence 2) dscp (010000)
cs3  value: 24
CS3(precedence 3) dscp (011000)
cs4  value: 32
CS4(precedence 4) dscp (100000)
cs5  value: 40
CS5(precedence 5) dscp (101000)
cs6  value: 48
CS6(precedence 6) dscp (110000)
cs7  value: 56
CS7(precedence 7) dscp (111000)
default  value: 0
default dscp (000000)
ef  value: 46
EF dscp (101110)
dscp-enum1
af11  value: 10
AF11 dscp (001010)
af12  value: 12
AF12 dscp (001100)
af13  value: 14
AF13 dscp (001110)
af21  value: 18
AF21 dscp (010010)
af22  value: 20
AF22 dscp (010100)
af23  value: 22
AF23 dscp (010110)
af31  value: 26
AF31 dscp (011010)
af32  value: 28
AF32 dscp (011100)
af33  value: 30
AF33 dscp (011110)
af41  value: 34
AF41 dscp (100010)
af42  value: 36
AF42 dscp (100100)
af43  value: 38
AF43 dscp (100110)
cs1  value: 8
CS1(precedence 1) dscp (001000)
cs2  value: 16
CS2(precedence 2) dscp (010000)
cs3  value: 24
CS3(precedence 3) dscp (011000)
cs4  value: 32
CS4(precedence 4) dscp (100000)
cs5  value: 40
CS5(precedence 5) dscp (101000)
cs6  value: 48
CS6(precedence 6) dscp (110000)
cs7  value: 56
CS7(precedence 7) dscp (111000)
default  value: 0
default dscp (000000)
ef  value: 46
EF dscp (101110)
dscp-enum2
af11  value: 10
AF11 dscp (001010)
af12  value: 12
AF12 dscp (001100)
af13  value: 14
AF13 dscp (001110)
af21  value: 18
AF21 dscp (010010)
af22  value: 20
AF22 dscp (010100)
af23  value: 22
AF23 dscp (010110)
af31  value: 26
AF31 dscp (011010)
af32  value: 28
AF32 dscp (011100)
af33  value: 30
AF33 dscp (011110)
af41  value: 34
AF41 dscp (100010)
af42  value: 36
AF42 dscp (100100)
af43  value: 38
AF43 dscp (100110)
cs1  value: 8
CS1(precedence 1) dscp (001000)
cs2  value: 16
CS2(precedence 2) dscp (010000)
cs3  value: 24
CS3(precedence 3) dscp (011000)
cs4  value: 32
CS4(precedence 4) dscp (100000)
cs5  value: 40
CS5(precedence 5) dscp (101000)
cs6  value: 48
CS6(precedence 6) dscp (110000)
cs7  value: 56
CS7(precedence 7) dscp (111000)
default  value: 0
default dscp (000000)
ef  value: 46
EF dscp (101110)
set-cos-transmit

Set cos and send it
set-cos-transmit1

Set cos and send it
set-cos-transmit2

Set cos and send it
cos-val

Type: uinteger

min: 0  max: 7  

new cos value
cos-val1

Type: uinteger

min: 0  max: 7  

new cos value
cos-val2

Type: uinteger

min: 0  max: 7  

new cos value
set-discard-class-transmit

Set discard class and send it Not available in this release.
set-discard-class-transmit1

Set discard class and send it Not available in this release.
set-discard-class-transmit2

Set discard class and send it Not available in this release.
disc-class-val

Type: uinteger

min: 0  max: 63  

new discard-class value
disc-class-val1

Type: uinteger

min: 0  max: 63  

new discard-class value
disc-class-val2

Type: uinteger

min: 0  max: 63  

new discard-class value
set-qos-transmit

Set qos-group and send it
set-qos-transmit1

Set qos-group and send it
set-qos-transmit2

Set qos-group and send it
qos-grp-val

Type: uinteger

min: 0  max: 3  

QoS group value
qos-grp-val1

Type: uinteger

min: 0  max: 3  

QoS group value
qos-grp-val2

Type: uinteger

min: 0  max: 3  

QoS group value
set-mpls-exp-imposition-transmit

set-mpls-exp-imposition-transmit Not available in this release.
set-mpls-exp-imposition-transmit1

set-mpls-exp-imposition-transmit Not available in this release.
set-mpls-exp-imposition-transmit2

set-mpls-exp-imposition-transmit Not available in this release.
exp-value-imp

Type: uinteger

min: 0  max: 7  

MPLS imposition value
exp-value-imp1

Type: uinteger

min: 0  max: 7  

MPLS imposition value
exp-value-imp2

Type: uinteger

min: 0  max: 7  

MPLS imposition value
set-mpls-exp-topmost-transmit

Set MPLS topmost label Not available in this release.
set-mpls-exp-topmost-transmit1

Set MPLS topmost label Not available in this release.
set-mpls-exp-topmost-transmit2

Set MPLS topmost label Not available in this release.
exp-value-top

Type: uinteger

min: 0  max: 7  

MPLS topmost value
exp-value-top1

Type: uinteger

min: 0  max: 7  

MPLS topmost value
exp-value-top2

Type: uinteger

min: 0  max: 7  

MPLS topmost value
set

Set a particular value using table or markdown map
exc-frm-field
dscp  value: 2
table map of dscp type (1)
discard-class  value: 4
table map of discard-class type (2)
exc-to-field
dscp  value: 2
table map of dscp type (1)
discard-class  value: 4
table map of discard-class type (2)
vio-frm-field
dscp  value: 2
table map of dscp type (1)
discard-class  value: 4
table map of discard-class type (2)
vio-to-field
dscp  value: 2
table map of dscp type (1)
discard-class  value: 4
table map of discard-class type (2)
table

Set using the table-map Not available in this release.
table2

Set using the table-map Not available in this release.
cir-markdown-map

Markdown map table name for exceed action
pir-markdown-map

Markdown map table name for violate action

Command Modes

  • /exec/configure

show (bgp)

show { ip mbgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] | ip bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] all | ip bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] [ ipv4 { unicast | multicast } ] } { rib-install | rib-uninstall | rib-pending } [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ]

Syntax Description

show

Show running system information
ip

Display IP information
bgp

Display BGP status and configuration
mbgp

Display MBGP status and configuration
vrf

Virtual Router Context
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name
ALL_VRFS_012345678901234

All VRFs
ipv4

Display BGP information for IPv4 address family
unicast

Display BGP information for unicast address family
multicast

Display BGP information for multicast address family
all

Display BGP information for all address families
rib-install

Routes installed in RIB
rib-uninstall

Routes not installed in RIB
rib-pending

Routes not acknowledged by RIB

Command Modes

  • /exec

show (eigrp)

show { ipv6 eigrp [eigrp-ptag] { topology | route } [ ipv6-prefix | active | summary | pending | zero-successors | detail-links | all-links ] [ vrf { vrf-name | vrf-known-name | all } ] | ip eigrp [eigrp-ptag] { topology | route } [ address mask | prefix | active | summary | pending | zero-successors | detail-links | all-links ] [ vrf { vrf-name | vrf-known-name | all } ] } [ __readonly__ TABLE_asn asn TABLE_vrf vrf router_id [ head_serial next_serial route_count replies_pending dummies eigrp_name num_if num_neighbors num_active_if [ TABLE_quiescent_if ifname ] ] [ TABLE_ent ip_prefix ipv6_prefix active num_successors feasible_distance tag send_flag xmit_serno xmit_refcount xmit_anchored outstd_replies query_origin retry_count act_min_time act_max_time act_avg_time act_count peers_sia_stuck [ TABLE_succ s_nexthop s_v6nexthop s_origin s_v6origin s_metric s_bandwidth s_delay s_reliability s_load s_min_mtu s_hop_count s_int_tag s_succ_metric s_reply_status s_sia_status s_external [ s_ext_routerid s_ext_asn s_ext_proto s_ext_metric s_ext_admin_tag ] [ s_exterior_flag s_send_flag s_send_flag_hex s_ifname s_xmit_serno s_xmit_anchored ] [ TABLE_reply_status rs_ipaddr rs_ipv6addr rs_ifname ] [ TABLE_sia_status ss_ipaddr ss_ipv6addr ss_ifname ] ] ] ]

Syntax Description

show

Show running system information
ip

Display IP information
ipv6

Display IPv6 information
eigrp

Display EIGRP status and configuration
vrf

Display per-VRF information
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name
all

Display information for all VRFs
eigrp-ptag

Type: string

pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events

length: 20

Process tag
topology

IP-EIGRP Topology Table
route

IP-EIGRP internal routes
address

Type: ipaddr

Network to display information about
mask

Type: ipaddr

Network mask
prefix

Type: ipprefix

IP prefix <network>/<length>, e.g., 192.168.0.0/16
ipv6-prefix

Type: ipv6prefix

IPv6 prefix <network>/<length>
active

Show only active entries
summary

Show a summary of the topology table
pending

Show only entries pending transmission
zero-successors

Show only zero successor entries
detail-links

Show all links in topology table with details
all-links

Show all links in topology table
__readonly__
TABLE_asn
asn

Type: uinteger
TABLE_vrf
vrf

Type: string
router_id

Type: ipaddr
head_serial

Type: uinteger
next_serial

Type: uinteger
route_count

Type: uinteger
replies_pending

Type: uinteger
dummies

Type: uinteger
eigrp_name

Type: string
num_if

Type: uinteger
num_neighbors

Type: uinteger
num_active_if

Type: uinteger
TABLE_quiescent_if
ifname

Type: interface
TABLE_ent
ip_prefix

Type: ipprefix
ipv6_prefix

Type: ipv6prefix
active

Type: bool
num_successors

Type: uinteger
feasible_distance

Type: uinteger
tag

Type: uinteger
send_flag
none  value: 1
update  value: 2
query  value: 3
reply  value: 4
siaquery  value: 5
siareply  value: 6
xmit_serno

Type: uinteger
xmit_refcount

Type: uinteger
xmit_anchored

Type: bool
outstd_replies

Type: uinteger
query_origin
none  value: 1
clear  value: 2
local  value: 3
multiple  value: 4
successor  value: 5
retry_count

Type: uinteger
act_min_time

Type: uinteger
act_max_time

Type: uinteger
act_avg_time

Type: uinteger
act_count

Type: uinteger
peers_sia_stuck

Type: uinteger
TABLE_succ
s_nexthop

Type: ipaddr
s_v6nexthop

Type: ipv6addr
s_origin

Type: ipaddr
s_v6origin

Type: ipv6addr
s_metric

Type: uinteger
s_succ_metric

Type: uinteger
s_bandwidth

Type: uinteger
s_delay

Type: uinteger
s_reliability

Type: uinteger
s_load

Type: uinteger
s_min_mtu

Type: uinteger
s_hop_count

Type: uinteger
s_int_tag

Type: uinteger
s_reply_status

Type: bool
s_sia_status

Type: bool
s_external

Type: bool
s_ext_routerid

Type: ipaddr
s_ext_asn

Type: uinteger
s_ext_proto

Type: string
s_ext_metric

Type: uinteger
s_ext_admin_tag

Type: uinteger
s_exterior_flag

Type: bool
s_send_flag
none  value: 1
update  value: 2
query  value: 3
reply  value: 4
siaquery  value: 5
siareply  value: 6
s_send_flag_hex

Type: uinteger
s_ifname

Type: interface
s_xmit_serno

Type: uinteger
s_xmit_anchored

Type: bool
TABLE_reply_status
rs_ipaddr

Type: ipaddr
rs_ipv6addr

Type: ipv6addr
rs_ifname

Type: interface
TABLE_sia_status
ss_ipaddr

Type: ipaddr
ss_ipv6addr

Type: ipv6addr
ss_ifname

Type: interface

Command Modes

  • /exec

show (l2fm)

show { consistency-checker l2 module modnum | forwarding consistency l2 modnum } [ __readonly__ l2entry header TABLE_mac_address disp_mac_addr disp_type disp_vlan disp_is_static disp_age disp_is_secure disp_is_ntfy disp_port ]

Syntax Description

show

show
consistency-checker

Consistency Checker
forwarding

Display Forwarding Information
consistency

consistency
l2

l2

module

Module number
modnum

Type: integer

min: 1  max: 16  

Module Number
__readonly__
header

Type: string

Header
l2entry

Type: string

L2 Entry String
TABLE_mac_address

Mac address table
disp_type

Type: string

GateWay or Primary Entry or OTV or None
disp_vlan

Type: uinteger

VLAN
disp_mac_addr

Type: ethernet

MAC Address
disp_is_static

Type: bool

Static/Dynamic

disp_age

Type: uinteger

Age of the Mac
disp_is_secure

Type: bool

Is mac secure
disp_is_ntfy

Type: bool

Is mac notified
disp_port

Type: string

Interface/port info of the mac

Command Modes

  • /exec

show (stp_full)

show [pending]

Syntax Description

show

Display region configurations
pending

Display the new mst configuration to be applied

Command Modes

  • /exec/configure/spanning-tree/mst/configuration

show (u6rib)

show { ipv6 route | routing [ vrf { vrf-name | vrf-known-name | vrf-all } ] ipv6 [unicast] [ topology topology-name ] } [l3vm-info] [rpf] [ ipv6-addr | hostname | ipv6-prefix [ longer-prefixes | shorter-prefixes ] ] [ ipv6-protocol [all] | next-hop next-hop | interface interface | updated [ since stime ] [ until utime ] ] + [ summary | [detail] [deleted] ] [ vrf { vrf-name | vrf-known-name | vrf-all } ] [ __readonly__ TABLE_vrf vrf-name-out TABLE_addrf addrf TABLE_prefix ipprefix ucast-nhops mcast-nhops attached TABLE_path ubest mbest ipnexthop ifname pref metric uptime clientname [type] [tag] [stale] [hidden] ]

Syntax Description

show

Show running system information
route

Display IPv6 routing table
routing

Display routing information
vrf

Display per-VRF information
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name
<vrf-all>

Display information for all VRFs
ipv6

Display IPv6 information
unicast

Display unicast information
topology

Display per-topology information
topology-name

Type: string

topology name
l3vm-info

Display corresponding L3VM information
rpf

Display RPF information for multicast source
ipv6-addr

Type: ipv6addr

Display single route longest match lookup
hostname

Type: string

Display single route longest match lookup
ipv6-prefix

Type: ipv6prefix

Display single exact match route
longer-prefixes

Display matching routes with mask-lengths >= prefix
shorter-prefixes

Display matching routes with mask-lengths <= prefix
ipv6-protocol

Type: string

antipattern: .*:.*\ | summary\ | deleted\ | detail

Display routes for protocol (or route type)
all

Display routes for protocol for backup next-hops too
next-hop

Display routes with this next-hop only
next-hop

Type: ipv6addr

Next hop address
interface

Display routes with this output interface only
interface

Type: interface

Interface Name
updated

Display routes filtered by last updated time
since

Display those routes updated since this time
stime

Type: string

Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]
until

Display those routes updated until this time
utime

Type: string

Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]
summary

Display route counts
deleted

Display delete-pending routes also
detail

Display routes in full detail
__readonly__
TABLE_vrf
vrf-name-out

Type: vrf
TABLE_addrf
addrf
ipv6  value: 1
TABLE_prefix
ipprefix

Type: ipv6prefix
ucast-nhops

Type: integer
mcast-nhops

Type: integer
attached

Type: bool
TABLE_path
ubest

Type: bool
mbest

Type: bool
ipnexthop

Type: ipv6addr
ifname

Type: interface
pref

Type: integer
tag

Type: integer
metric

Type: integer
uptime

Type: string
clientname

Type: string
type
unknown  value: 1
  value: 2
  value: 3
  value: 4
rip  value: 5
L1  value: 6
L2  value: 7
intra  value: 8
inter  value: 9
type-1  value: 10
type-2  value: 11
nssa type-1  value: 12
nssa type-2  value: 13
intra  value: 14
inter  value: 15
type-1  value: 16
type-2  value: 17
nssa type-1  value: 18
nssa type-2  value: 19
internal  value: 20
external  value: 21
internal  value: 22
external  value: 23
discard  value: 24
internal  value: 25
external  value: 26
stale

Type: bool
hidden

Type: bool

Command Modes

  • /exec

show (urib)

show { routing | ip route } [ vrf { vrf-name | vrf-known-name | vrf-all } ] [ ip | ipv4 ] [unicast] [ topology topology-name ] [l3vm-info] [rpf] [ ip-addr | ip-prefix [ longer-prefixes | shorter-prefixes ] ] [ protocol [all] | next-hop next-hop | interface interface | updated [ since stime ] [ until utime ] ] + [ summary | detail ] [ vrf { vrf-name | vrf-known-name | vrf-all } ] [ __readonly__ TABLE_vrf vrf-name-out TABLE_addrf addrf [ TABLE_prefix ipprefix ucast-nhops mcast-nhops attached TABLE_path [ipnexthop] [ifname] uptime pref metric clientname [type] [tag] [stale] [unres] [hidden] [stale-label] [ubest] [mbest] ] ]

Syntax Description

show

Show running system information
routing

Display routing information
ip

Display IP information
route

Display routing information
vrf

Display per-VRF information
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name
<vrf-all>

Display information for all VRFs
ipv4

Display IP information
unicast

Display unicast information
topology

Display per-topology information
topology-name

Type: string

topology name
l3vm-info

Display corresponding L3VM information
rpf

Display RPF information for multicast source
ip-addr

Type: ipaddr

Display single route longest match lookup
ip-prefix

Type: ipprefix

Display single exact match route
longer-prefixes

Display matching routes with mask-lengths >= prefix
shorter-prefixes

Display matching routes with mask-lengths <= prefix
protocol

Type: string

antipattern: summary

Display routes for protocol (or route type)
all

Display routes for protocol for backup next-hops too
next-hop

Display routes with this next-hop only
next-hop

Type: ipaddr

Next hop address
interface

Display routes with this output interface only
interface

Type: interface

Interface Name
updated

Display routes filtered by last updated time
since

Display those routes updated since this time
stime

Type: string

Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]
until

Display those routes updated until this time
utime

Type: string

Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]
summary

Display route counts
detail

Display routes in full detail
__readonly__
TABLE_vrf
vrf-name-out

Type: vrf
TABLE_addrf
addrf
ipv4  value: 1
TABLE_prefix
ipprefix

Type: ipprefix
ucast-nhops

Type: integer
mcast-nhops

Type: integer
attached

Type: bool
TABLE_path
ipnexthop

Type: ipaddr
ifname

Type: interface
uptime

Type: duration
pref

Type: integer
metric

Type: integer
clientname

Type: string
type
unknown  value: 1
  value: 2
  value: 3
  value: 4
rip  value: 5
L1  value: 6
L2  value: 7
intra  value: 8
inter  value: 9
type-1  value: 10
type-2  value: 11
nssa type-1  value: 12
nssa type-2  value: 13
intra  value: 14
inter  value: 15
type-1  value: 16
type-2  value: 17
nssa type-1  value: 18
nssa type-2  value: 19
internal  value: 20
external  value: 21
internal  value: 22
external  value: 23
discard  value: 24
internal  value: 25
external  value: 26
invalid-route-type  value: 27
tag

Type: integer
stale

Type: bool
unres

Type: bool
hidden

Type: bool
stale-label

Type: bool
ubest

Type: bool
mbest

Type: bool

Command Modes

  • /exec

show (vdc_mgr)

show { hostname | switchname } [ __readonly__ hostname ]

Syntax Description

show

Show running system information
hostname

show the system's hostname
switchname

show the system's hostname
__readonly__

Read Only
hostname

Type: string

Command Modes

  • /exec

shut

[no] shut

Syntax Description

no

Negate a command or set its defaults
shut

Shut a monitor session

Command Modes

  • /exec/configure/monitor-common

shutdown (bgp)

[ no | default ] shutdown

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
shutdown

Administratively shutdown this neighbor

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor-sess

shutdown (if_manager)

[no] shutdown [force]

Syntax Description

no

Negate a command or set its defaults
shutdown

Enable/disable an interface
force

Enable/disable an interface

Command Modes

  • /exec/configure/if-ethernet
  • /exec/configure/if-ethernet-switch
  • /exec/configure/if-cpp
  • /exec/configure/if-fv
  • /exec/configure/if-fa
  • /exec/configure/if-svc
  • /exec/configure/if-fc-tunnel
  • /exec/configure/if-loopback
  • /exec/configure/if-sme
  • /exec/configure/if-ioa
  • /exec/configure/if-ethernet-all
  • /exec/configure/if-eth-base
  • /exec/configure/if-sub
  • /exec/configure/if-overlay
  • /exec/configure/if-te
  • /exec/configure/if-nve

shutdown (if_manager)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

Enable/disable an interface

Command Modes

  • /exec/configure/if-gig-ether
  • /exec/configure/if-fc
  • /exec/configure/if-bay
  • /exec/configure/if-ext
  • /exec/configure/if-vsan
  • /exec/configure/if-iscsi
  • /exec/configure/if-port-channel
  • /exec/configure/if-fcip
  • /exec/configure/if-sme
  • /exec/configure/if-ioa
  • /exec/configure/if-vfc
  • /exec/configure/if-eth-port-channel
  • /exec/configure/if-vfc-port-channel

shutdown (bgp)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

Administratively shutdown BGP protocol

Command Modes

  • /exec/configure/router-bgp

shutdown (eigrp)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

Shutdown this instance of EIGRP

Command Modes

  • /exec/configure/router-eigrp/router-eigrp-vrf-common
  • /exec/configure/router-eigrp/router-eigrp-af-common

shutdown (if_manager)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

Enable/disable an interface

Command Modes

  • /exec/configure/if-mgmt-ether

shutdown (isis)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

Shutdown this IS-IS process

Command Modes

  • /exec/configure/router-isis/router-isis-vrf-common

shutdown (l3vm)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

Shutdown current VRF

Command Modes

  • /exec/configure/vrf

shutdown (ospf)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

Shutdown the OSPF protocol instance

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

shutdown (ospfv3)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

shutdown the OSPF protocol instance

Command Modes

  • /exec/configure/router-ospf3
  • /exec/configure/router-ospf3/vrf

shutdown (rip)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

Shutdown this instance of RIP

Command Modes

  • /exec/configure/router-rip
  • /exec/configure/router-rip/router-rip-vrf

shutdown (svi)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

Enable/disable an interface

Command Modes

  • /exec/configure/if-vlan-common

shutdown (tm)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

Shutdown tunnel interface(s)

Command Modes

  • /exec/configure/if-any-tunnel

shutdown (vlan_mgr_cli)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

Shutdown VLAN switching

Command Modes

  • /exec/configure/vlan

shutdown (vrrp_mgr)

[no] shutdown

Syntax Description

no

Negate a command or set its defaults
shutdown

Enable or disable a VR

Command Modes

  • /exec/configure/if-eth-any/vrrp

shutdown force

[no] shutdown force

Syntax Description

no

Negate a command or set its defaults
shutdown

Enable/disable an interface
force

Enable/disable an interface

Command Modes

  • /exec/configure/if-mgmt-ether

signalling client batch-time

[no] signalling client batch-time msec

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
client

Client information
batch-time

Time interval between batched messages to client
msec

Type: uinteger

min: 0  max: 10000  default: 50

Batch-time msec [use 0 to disble, else minimum timer value is 20 msec]

Command Modes

  • /exec/configure/ip-rsvp

signalling hello graceful-restart

[no] signalling hello graceful-restart

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
hello

RSVP Hello configuration commands
graceful-restart

RSVP Graceful restart commands

Command Modes

  • /exec/configure/ip-rsvp

signalling hello graceful-restart refresh interval

[no] signalling hello graceful-restart refresh interval value

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
hello

RSVP Hello configuration commands
graceful-restart

RSVP Graceful restart commands
refresh

Configure RSVP Hello refresh behavior for Graceful Restart
interval

Time between sending Hello Requests for Graceful Restart
value

Type: uinteger

min: 2000  max: 30000  default: 10000

Hello interval in msec

Command Modes

  • /exec/configure/ip-rsvp

signalling hello graceful-restart refresh misses

[no] signalling hello graceful-restart refresh misses value

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
hello

RSVP Hello configuration commands
graceful-restart

RSVP Graceful restart commands
refresh

Configure RSVP Hello refresh behavior for Graceful Restart
misses

Number of Hello misses for Graceful Restart
value

Type: uinteger

min: 4  max: 10  default: 4

Number of missed Hello Acks which triggers neighbor down

Command Modes

  • /exec/configure/ip-rsvp

signalling hello graceful-restart send recovery-time

[no] signalling hello graceful-restart send recovery-time value

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
hello

RSVP Hello configuration commands
graceful-restart

RSVP Graceful restart commands
send

Configure the restart-time in outgoing Hello msgs
recovery-time

Configure the recovery-time in outgoing GR Hello msgs
value

Type: uinteger

min: 30000  max: 3600000  default: 120000

recovery-time in msec

Command Modes

  • /exec/configure/ip-rsvp

signalling hello graceful-restart send restart-time

[no] signalling hello graceful-restart send restart-time value

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
hello

RSVP Hello configuration commands
graceful-restart

RSVP Graceful restart commands
send

Configure the restart-time in outgoing Hello msgs
restart-time

Configure the restart-time in outgoing GR Hello msgs
value

Type: uinteger

min: 0  max: 600000  default: 30000

restart-time in msec

Command Modes

  • /exec/configure/ip-rsvp

signalling hello reroute

[no] signalling hello reroute

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
hello

RSVP Hello configuration commands
reroute

RSVP Reroute commands

Command Modes

  • /exec/configure/ip-rsvp

signalling initial-retransmit-delay

[no] signalling initial-retransmit-delay msec

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
initial-retransmit-delay

RSVP Initial retransmit delay
msec

Type: uinteger

min: 100  max: 30000  default: 5000

Initial retransmit delay in millisec

Command Modes

  • /exec/configure/ip-rsvp

signalling patherr state-removal

[no] signalling patherr state-removal

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
patherr

Configure Path-Error processing
state-removal

Setup automatic removal of path-state

Command Modes

  • /exec/configure/ip-rsvp

signalling rate-limit

[no] signalling rate-limit [ interval msec ] [ limit messages ] | [ limit messages ] [ interval msec ]

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
rate-limit

Configure rate-limiting
interval

Configure scheduling interval
msec

Type: uinteger

min: 250  max: 2000  default: 1000

Interval in millisec
limit

Configure message limit per scheduling interval
messages

Type: uinteger

min: 1  max: 500  default: 100

Message limit value

Command Modes

  • /exec/configure/ip-rsvp

signalling refresh interval

[no] signalling refresh interval seconds

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
refresh

Configure RSVP signaling refresh parameters
interval

Set signaling refresh interval
seconds

Type: uinteger

min: 10  max: 180  default: 45

Signaling refresh interval in seconds

Command Modes

  • /exec/configure/ip-rsvp

signalling refresh misses

[no] signalling refresh misses value

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
refresh

Configure RSVP signaling refresh parameters
misses

Set refresh misses tolerated before expiring a state
value

Type: uinteger

min: 1  max: 8  default: 4

Refresh miss value

Command Modes

  • /exec/configure/ip-rsvp

signalling refresh pace

[no] signalling refresh pace

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
refresh

Configure RSVP signaling refresh parameters
pace

Pace sending of refresh messages

Command Modes

  • /exec/configure/ip-rsvp

signalling refresh reduction

[no] signalling refresh reduction

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
refresh

Configure RSVP signaling refresh parameters
reduction

Enable, disable or set refresh reduction parameters

Command Modes

  • /exec/configure/ip-rsvp

signalling refresh reduction ack-delay

[no] signalling refresh reduction ack-delay msec

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
refresh

Configure RSVP signaling refresh parameters
reduction

Enable, disable or set refresh reduction parameters
ack-delay

Set delay for sending ACK messages
msec

Type: uinteger

min: 100  max: 5000  default: 400

ACK delay value in millisec

Command Modes

  • /exec/configure/ip-rsvp

signalling refresh reduction bundle-max-size

[no] signalling refresh reduction bundle-max-size value

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
refresh

Configure RSVP signaling refresh parameters
reduction

Enable, disable or set refresh reduction parameters
bundle-max-size

Set bundle-maximum-size
value

Type: uinteger

min: 0  max: 65000  default: 4096

Bundle size in bytes, use zero to disable bundling

Command Modes

  • /exec/configure/ip-rsvp

signalling refresh reduction bundle-transmit-time

[no] signalling refresh reduction bundle-transmit-time msec

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
refresh

Configure RSVP signaling refresh parameters
reduction

Enable, disable or set refresh reduction parameters
bundle-transmit-time

Set bundle-transmit-time
msec

Type: uinteger

min: 10  max: 50000  default: 50

Bundle transmit time value in msec

Command Modes

  • /exec/configure/ip-rsvp

signalling refresh reduction rapid-retransmit

[no] signalling refresh reduction rapid-retransmit

Syntax Description

'no'

Negate a command or set its defaults
signalling

Configure RSVP Signalling information
refresh

Configure RSVP signaling refresh parameters
reduction

Enable, disable or set refresh reduction parameters
rapid-retransmit

Rapid-retransmit of RSVP messages

Command Modes

  • /exec/configure/ip-rsvp

signing level none cisco unsigned

[no] signing level { none | cisco | unsigned } | no signing level

Syntax Description

no

Negate a command or set its defaults
signing

Virtual service package signing settings
level

Package signing level allowed for virtual service installation
none

Most restrictive, don't allow package installation
cisco

Allow only Cisco signed packages
unsigned

Least restrictive, allow unsigned and all signing methods

Command Modes

  • /exec/configure/virt-serv-global

site-id

site-id s0 | no site-id

Syntax Description

no

Negate a command or set its defaults
site-id

site id of the network where switch is deployed
s0

Type: remainder

Provide site id

Command Modes

  • /exec/configure/callhome

site-of-origin

site-of-origin { ext-comm-soo-aa2nn4 | ext-comm-soo-aa4nn2 } | no site-of-origin [ ext-comm-soo-aa2nn4 | ext-comm-soo-aa4nn2 ]

Syntax Description

no

Negate a command or set its defaults
site-of-origin

Site of Origin
ext-comm-soo-aa2nn4

Type: community

Extcommunity number
ext-comm-soo-aa4nn2

Type: community

Extcommunity number

Command Modes

  • /exec/configure/if-igp
  • /exec/configure/if-mgmt-ether

sleep

sleep i0

Syntax Description

sleep

Sleep for the specified number of seconds
i0

Type: integer

Enter the number of seconds to sleep

Command Modes

  • /exec

slot

slot module { quoted quoted-cmd | cmd }

Syntax Description

slot

run commands on specific linecard (or set slot for commands that take optional slot number)
module

Type: integer

the slot number (aka module number)
quoted

enter the command with quotes -> pipe redirection and semi-colon are local
quoted-cmd

Type: string

the command(s) to run on lc; separated by <space> <semi-colon> <space>
cmd

Type: remainder

the command(s) to run on lc; separated by <space> <semi-colon> <space>

Command Modes

  • /exec

smtp-host

{ smtp-host { ipv4 | ipv6 | host } [ smtp-port port ] | smtp-port port | reply-to reply | from from | vrf vrf-known-name } | no { smtp-host | smtp-port | reply-to | from | vrf }

Syntax Description

no

Negate a command or set its defaults
smtp-host

SMTP server host
ipv4

Type: ipaddr

IPV4 address
ipv6

Type: ipv6addr

IPV6 address
host

Type: string

length: 254

DNS name
smtp-port

SMTP server port
port

Type: uinteger

min: 1  max: 65535  

Port for SMTP server
reply-to

Reply to email address
reply

Type: string

length: 254

Provide reply-to email address
from

From email address
from

Type: string

length: 254

Provide from email address
vrf

VRF for pipe email transmit
vrf-known-name

Type: vrf

Known VRF name

Command Modes

  • /exec/configure/email

snmp-server aaa-user cache-timeout

[no] snmp-server aaa-user cache-timeout timeout

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
aaa-user

set duration for which aaa-cached snmp user exists
cache-timeout

timeout for AAA cache
timeout

Type: integer

min: 1  max: 86400  

timeout for which aaa-cached user exists(in secs)

Command Modes

  • /exec/configure

snmp-server community

[no] snmp-server community s0 [ group s1 | ro | rw ]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
community

set community string and access privs
s0

Type: string

length: 32

SNMP community string
group

Group to which the community belongs
s1

Type: string

length: 32

Group to which the community belongs
ro

Read-only access with this community string
rw

Read-write access with this community string

Command Modes

  • /exec/configure

snmp-server community use-acl

[no] snmp-server community community_name use-acl acl_name

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
community

set community string and access privs
community_name

Type: string

length: 32

SNMP community string
use-acl

acl name to filter snmp requests
acl_name

Type: string

length: 32

acl name to filter snmp requests

Command Modes

  • /exec/configure

snmp-server contact

[no] snmp-server contact [line]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
contact

modify sysContact
line

Type: remainder

modify sysContact

Command Modes

  • /exec/configure

snmp-server context

[no] snmp-server context context_name [ instance instance-name ] [ vrf { vrf-name | vrf-known-name } ] [ topology topology-name ]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
context

SNMP context to be mapped
context_name

Type: string

length: 32

name of the SNMP context
instance

Protocol instance associated with the SNMP context
instance-name

Type: string

length: 32

Name of the protocol instance
vrf

VRF associated with the SNMP context
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name
topology

Topology associated with the SNMP context
topology-name

Type: string

length: 32

name of the Topology

Command Modes

  • /exec/configure

snmp-server context type len val

[no] snmp-server context context_name type { vrf | topology | instance | vlan | mst } len i2 val i3

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
context

SNMP context to be mapped
context_name

Type: string

length: 32

name of the SNMP context
type

type of association to context
instance

Protocol instance associated with the SNMP context
vrf

VRF associated with the SNMP context
topology

Topology associated with the SNMP context
vlan

Vlan id associated with the SNMP context
mst

Mst id associated with the SNMP context
len

Length of value
i2

Type: integer

Length of value
val

Value
i3

Type: string

Value of variable associated with the SNMP context

Command Modes

  • /exec/configure

snmp-server counter cache-enable

[no] snmp-server counter cache-enable

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
counter

Configure port counter configuration
cache-enable

Enable port stats cache

Command Modes

  • /exec/configure

snmp-server counter cache enable

[no] snmp-server counter cache enable

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
counter

Configure port counter configuration
cache

port stats cache
enable

enable port stats cache

Command Modes

  • /exec/configure

snmp-server counter cache timeout

[no] snmp-server counter cache timeout timeout

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
counter

Configure port counter configuration
cache

Port stats cache
timeout

Timeout for port stats cache
timeout

Type: integer

min: 10  max: 3600  

Timeout for which cached port stats exists(in secs)

Command Modes

  • /exec/configure

snmp-server enable traps

[no] snmp-server enable traps [ trap_arg trap_sub_category+ ]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
enable

Enable SNMP Traps
traps

Enable SNMP traps
trap_arg

Type: string

length: 64

Enable __left__ traps
trap_sub_category

Type: userdef

Enter the trap

Command Modes

  • /exec/configure

snmp-server enable traps bgp

[no] snmp-server enable traps bgp

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
enable

Enable SNMP Traps
traps

Enable SNMP traps
bgp

Enable SNMP BGP traps

Command Modes

  • /exec/configure

snmp-server enable traps eigrp

[no] snmp-server enable traps eigrp [eigrp-ptag]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
enable

Enable SNMP Traps
traps

Enable SNMP traps
eigrp

Enable SNMP EIGRP traps
eigrp-ptag

Type: string

pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events

length: 20

Process tag

Command Modes

  • /exec/configure

snmp-server enable traps entity fru

[no] snmp-server enable traps entity fru

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
enable

Enable SNMP Traps
traps

Enable SNMP traps
entity

Enable SNMP agent traps
fru

Enable SNMP entity fru trap

Command Modes

  • /exec/configure

snmp-server enable traps msdp

[no] snmp-server enable traps msdp

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
enable

Enable SNMP Traps
traps

Enable SNMP traps
msdp

Enable SNMP MSDP traps

Command Modes

  • /exec/configure

snmp-server enable traps ospf (ospf)

no snmp-server enable traps ospf [tag] rate-limit [ window rate ] | snmp-server enable traps ospf [tag] rate-limit window rate

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
enable

Enable SNMP Traps
traps

Enable SNMP traps
ospf

Enable SNMP OSPF traps
tag

Type: string

pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf

length: 20

Process tag
rate-limit

Trap rate limit values
window

Type: integer

min: 2  max: 60  default: 10

Rate limit window size in seconds
rate

Type: integer

min: 0  max: 255  default: 7

Max number of traps sent in window time

Command Modes

  • /exec/configure

snmp-server enable traps ospf (ospf)

[no] snmp-server enable traps ospf [tag]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
enable

Enable SNMP Traps
traps

Enable SNMP traps
ospf

Enable SNMP OSPF traps
tag

Type: string

pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf

length: 20

Process tag

Command Modes

  • /exec/configure

snmp-server enable traps ospf lsa

[no] snmp-server enable traps ospf [tag] lsa

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
enable

Enable SNMP Traps
traps

Enable SNMP traps
ospf

Enable SNMP OSPF traps
tag

Type: string

pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf

length: 20

Process tag
lsa

Allow sending LSA traps

Command Modes

  • /exec/configure

snmp-server enable traps ospfv3 (ospfv3)

no snmp-server enable traps ospfv3 [tag] rate-limit | snmp-server enable traps ospfv3 [tag] rate-limit swindow rate

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
enable

Enable SNMP Traps
traps

Enable SNMP traps
ospfv3

Enable SNMP OSPFv3 traps
tag

Type: string

pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf

length: 20

Process tag
rate-limit

Trap rate limit values
swindow

Type: integer

min: 2  max: 60  

Rate limit window size in seconds
rate

Type: integer

min: 0  max: 255  

Max number of traps sent in window time

Command Modes

  • /exec/configure

snmp-server enable traps ospfv3 (ospfv3)

[no] snmp-server enable traps ospfv3 [tag]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
enable

Enable SNMP Traps
traps

Enable SNMP traps
ospfv3

Enable SNMP OSPFv3 traps
tag

Type: string

pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf

length: 20

Process tag

Command Modes

  • /exec/configure

snmp-server enable traps ospfv3 lsa

[no] snmp-server enable traps ospfv3 [tag] lsa

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
enable

Enable SNMP Traps
traps

Enable SNMP traps
ospfv3

Enable SNMP OSPFv3 traps
tag

Type: string

pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf

length: 20

Process tag
lsa

Enable SNMP OSPFv3 LSA traps

Command Modes

  • /exec/configure

snmp-server force-unload-feature

snmp-server force-unload-feature feature_name

Syntax Description

snmp-server

Configure snmp server
force-unload-feature

unload mibs of conditional feature forcefully
feature_name

Type: string

conditional feature name

Command Modes

  • /exec/configure

snmp-server globalEnforcePriv

[no] snmp-server globalEnforcePriv

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
globalEnforcePriv

globally enforce privacy for all the users

Command Modes

  • /exec/configure

snmp-server host (snmp)

[no] snmp-server host host0 { use_vrf s0 | filter_vrf s1 } [ udp-port i1 ]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
host

Specify hosts to receive SNMP notifications
host0

Type: nameorip

IPv4 or IPv6 address or DNS Name of SNMP notification host
use_vrf

Configures SNMP to use the selected VRF to communicate with the host receiver
s0

Type: string

length: 32

VRF name
filter_vrf

Filters notifications to the notification host receiver based on the configured VRF
s1

Type: string

length: 32

VRF name
udp-port

The notification host's UDP port number
i1

Type: integer

min: 0  max: 65535  

The notification host's UDP port number

Command Modes

  • /exec/configure

snmp-server host (snmp)

[no] snmp-server host host0 source-interface ifName [ udp-port i1 ]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
host

Specify hosts to send SNMP notifications
host0

Type: nameorip

IPv4 or IPv6 address or DNS Name of SNMP notification host
source-interface

Source interface to be used for sending out SNMP notifications to this host
ifName

Type: interface

Source interface name
udp-port

The notification host's UDP port number
i1

Type: integer

min: 0  max: 65535  

The notification host's UDP port number

Command Modes

  • /exec/configure

snmp-server host (snmp)

[no] snmp-server host host0 [ [ informs { version { 2c s1 | 3 { auth s2 | noauth s3 | priv s4 } } | s5 } | traps { version { 1 s0 | 2c s1 | 3 { auth s2 | noauth s3 | priv s4 } } | s5 } ] | { version { 1 s0 | 2c s1 | 3 { auth s2 | noauth s3 | priv s4 } } | s5 } ] [ udp-port i1 ]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
host

Specify hosts to receive SNMP notifications
host0

Type: nameorip

IPv4 or IPv6 address or DNS Name of SNMP notification host
informs

Send Inform messages to this host
traps

Send Traps messages to this host
version

SNMP version to use for notification messages
1

Use SNMPv1
s0

Type: string

length: 32

SNMP community string or SNMPv3 user name
udp-port

The notification host's UDP port number
i1

Type: integer

min: 0  max: 65535  

The notification host's UDP port number
2c

Use SNMPv2c
s1

Type: string

length: 32

SNMP community string or SNMPv3 user name
3

Use SNMPv3
auth

Use the SNMPv3 authNoPriv Security Level
s2

Type: string

length: 28

SNMP community string or SNMPv3 user name
noauth

Use the SNMPv3 noAuthNoPriv Security Level
s3

Type: string

length: 28

SNMP community string or SNMPv3 user name
priv

Use the SNMPv3 authPriv Security Level
s4

Type: string

length: 28

SNMP community string or SNMPv3 user name
s5

Type: string

length: 32

SNMP community string or SNMPv3 user name

Command Modes

  • /exec/configure

snmp-server host filter-vrf

[no] snmp-server host host0 filter-vrf { vrf-name | vrf-known-name } [ udp-port i1 ]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
host

Specify hosts to receive SNMP notifications
host0

Type: nameorip

IPv4 or IPv6 address or DNS Name of SNMP notification host
filter-vrf

Filters notifications to the notification host receiver based on the configured VRF
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name
udp-port

The notification host's UDP port number
i1

Type: integer

min: 0  max: 65535  

The notification host's UDP port number

Command Modes

  • /exec/configure

snmp-server host use-vrf

[no] snmp-server host host0 use-vrf { vrf-name | vrf-known-name } [ udp-port i1 ]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
host

Specify hosts to receive SNMP notifications
host0

Type: nameorip

IPv4 or IPv6 address or DNS Name of SNMP notification host
use-vrf

Configures SNMP to use the selected VRF to communicate with the host receiver
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name
udp-port

The notification host's UDP port number
i1

Type: integer

min: 0  max: 65535  

The notification host's UDP port number

Command Modes

  • /exec/configure

snmp-server load-cond-feature

[no] snmp-server load-cond-feature feature_name

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
load-cond-feature

load or unload mibs of conditional feature
feature_name

Type: string

conditional feature name

Command Modes

  • /exec/configure

snmp-server load-mib

[no] snmp-server load-mib mib_name

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
load-mib

load a given mib
mib_name

Type: string

mib module name

Command Modes

  • /exec/configure

snmp-server location

[no] snmp-server location [line]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
location

modify sysLocation
line

Type: remainder

modify sysLocation

Command Modes

  • /exec/configure

snmp-server mib community-map context

[no] snmp-server mib community-map community_name context context_name

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
mib

mib access parameters
community-map

SNMP community
community_name

Type: string

length: 32

SNMP community string
context

SNMP context to be mapped
context_name

Type: string

length: 32

name of the SNMP context

Command Modes

  • /exec/configure

snmp-server mib mpls vpn max-threshold

[no] snmp-server mib mpls vpn max-threshold time

Syntax Description

no

Negate a command or set its defaults
snmp-server

Modify non engine SNMP parameters
mib

MIB commands
mpls

Configurations for MPLS mibs Not available in this release.
vpn

Config special SNMP MPLS VPN objects
max-threshold

Config to control MPLS-VPN max threshold exceeded traps
time

Type: uinteger

min: 0  max: 4294967295  

Seconds before re-issuing maximum threshold trap

Command Modes

  • /exec/configure

snmp-server packetsize

[no] snmp-server packetsize size

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
packetsize

Largest SNMP packet size
size

Type: uinteger

min: 484  max: 17382  

Packet size

Command Modes

  • /exec/configure

snmp-server protocol enable

[no] snmp-server protocol enable

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
protocol

snmp protocol operations
enable

Enable/Disable snmp protocol operations

Command Modes

  • /exec/configure

snmp-server source-interface

[no] snmp-server source-interface { traps | informs } ifName

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
source-interface

Source interface to be used for sending out SNMP notifications
ifName

Type: interface

Source interface name
traps

SNMP Trap notifications for which this source interface needs to be used
informs

SNMP Inform notifications for which this source interface needs to be used

Command Modes

  • /exec/configure

snmp-server system-shutdown

[no] snmp-server system-shutdown

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
system-shutdown

Configure snmp-server for reload(2)

Command Modes

  • /exec/configure

snmp-server tcp-session

[no] snmp-server tcp-session [auth]

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
tcp-session

Enable one time authentication for snmp over tcp session.
auth

Enable one time authentication for snmp over tcp session.

Command Modes

  • /exec/configure

snmp-server user

[no] snmp-server user s0 { enforcePriv | [s1] [ auth { md5 | sha } s2 { priv [aes-128] s3 [localizedkey] [ auto | engineID s4 ] | [localizedkey1] [ auto1 | engineID1 s5 ] } ] }

Syntax Description

no

Negate a command or set its defaults
snmp-server

Configure snmp server
user

Define a user who can access the SNMP engine
s0

Type: string

length: 28

Name of the user
enforcePriv

Enforce privacy for the user
s1

Type: string

length: 28

Group name (ignored for notif target user)
auth

authentication parameters for the user
md5

Use HMAC MD5 algorithm for authentication
sha

Use HMAC SHA algorithm for authentication
s2

Type: string

length: 130

authentication password for user
priv

encryption parameters for the user
aes-128

Use 128-bit AES algorithm for privacy
s3

Type: string

length: 130

privacy password for user
localizedkey

specifies whether the passwords are in localized key format
auto

specifies whether the user is auto created (volatile)
engineID

engineID for configuring notif target user (for V3 informs)
s4

Type: string

length: 128

specifies notification target's SNMP engineID(colon separated)
localizedkey1

specifies whether the passwords are in localized key format
auto1

specifies whether the user is auto created (volatile)
engineID1

engineID for configuring notif target user (for V3 informs)
s5

Type: string

length: 128

specifies notification target's SNMP engineID(colon separated)

Command Modes

  • /exec/configure

snmp-trap event-type policy-name

snmp-trap [ intdata1 integer-data1 ] [ intdata2 integer-data2 ] [ strdata string-data ] event-type ev_type policy-name name

Syntax Description

event-type

Event type
ev_type

Type: integer

Event type
policy-name

Policy Name
name

Type: string

Policy Name

Command Modes

  • /exec

snmp ifmib ifalias long

[no] snmp ifmib ifalias long

Syntax Description

no

Negate a command or set its defaults
snmp

Configure snmp
ifmib

Configure snmp interface mib feature
ifalias

Configure snmp interface alias attribute for interface mib
long

Enable long description up to 256 characters for interface alias

Command Modes

  • /exec/configure

snmp trap link-status (if_manager)

snmp trap link-status | no snmp trap link-status

Syntax Description

no

Negate a command or set its defaults
snmp

Modify SNMP interface parameters
trap

Allow a specific SNMP trap
link-status

Allow SNMP LINKUP and LINKDOWN traps

Command Modes

  • /exec/configure/if-mgmt-ether

snmp trap link-status (if_manager)

snmp trap link-status | no snmp trap link-status

Syntax Description

no

Negate a command or set its defaults
snmp

Modify SNMP interface parameters
trap

Allow a specific SNMP trap
link-status

Allow SNMP LINKUP and LINKDOWN traps

Command Modes

  • /exec/configure/if-ethernet-all
  • /exec/configure/if-eth-base
  • /exec/configure/if-port-channel

snmp trap link-status (svi)

snmp trap link-status | no snmp trap link-status

Syntax Description

no

Negate a command or set its defaults
snmp

Modify SNMP interface parameters
trap

Allow a specific SNMP trap
link-status

Allow SNMP LINKUP and LINKDOWN traps

Command Modes

  • /exec/configure/if-vlan-common

snmp trap link-status (tm)

snmp trap link-status | no snmp trap link-status

Syntax Description

no

Negate a command
snmp

Modify SNMP interface parameters
trap

Allow a specific SNMP trap
link-status

Allow SNMP LINKUP and LINKDOWN traps

Command Modes

  • /exec/configure/if-any-tunnel

sort

" | " sort [ -b | -d | -f | -g | -i | -M | -n | -r | -k key | -t delim | -u ] +

Syntax Description

|

Pipe command output to filter
sort

Stream Sorter
-b

ignore leading blanks
-d

consider only blanks and alphanumeric characters
-f

fold lower case to upper case characters
-g

compare according to general numerical value
-i

consider only printable characters
-M

month sort
-n

compare according to string numerical value
-r

reverse the result of comparisons
-k

provide a key
-t

use different separator instead of non-blank to blank transition
-u

remove duplicate lines
key

Type: string

key in format POS1[,POS2] with POS = <field-nb>[.<char-pos>][<ordering>]
delim

Type: string

field delimiter char

Command Modes

  • /output

source (clic)

" | " source file [args] +

Syntax Description

|

Pipe command output to filter
source

run a script (python, tcl,...) from bootflash:scripts
file

Type: userdef

the script file to run
args

Type: userdef

argument to be passed to script

Command Modes

  • /output

source (eth_span)

[no] source interface interface [src_dir]

Syntax Description

no

Negate a command or set its defaults
source

Source configuration
interface

Configure interfaces
interface

Type: interface
src_dir

Source direction

rx  value: 1
ingress
tx  value: 2
egress
both  value: 3
both

Command Modes

  • /exec/configure/monitor-local-src
  • /exec/configure/config-monitor
  • /exec/configure/config-monitor-erspan-src

source (clic)

source [background] file [args] +

Syntax Description

source

run a script (python, tcl,...) from bootflash:scripts
background

run the script in the background, see also 'show background' and 'kill background'
file

Type: userdef

the script file to run
args

Type: userdef

argument to be passed to script

Command Modes

  • /exec

source (eth_span)

[no] source interface interface_range [src_dir]

Syntax Description

no

Negate a command or set its defaults
source

Source configuration
interface

Configure interfaces
interface_range

Type: interface-mrange
src_dir

Source direction

rx  value: 1
ingress
tx  value: 2
egress
both  value: 3
both

Command Modes

  • /exec/configure/monitor-local-src
  • /exec/configure/config-monitor
  • /exec/configure/config-monitor-erspan-src

source-group

[no] source-group source group

Syntax Description

no

Negate a command or set its defaults
source-group

Source Group
source

Type: ipaddr

Configure source address
group

Type: ipaddr

Configure group address

Command Modes

  • /exec/configure/if-nve

source-interface

source-interface src_if | no source-interface

Syntax Description

no

Negate a command or set its defaults
source-interface

NVE Source-Interface
src_if

Type: interface

Command Modes

  • /exec/configure/if-nve

source copy-sys

source copy-sys

Syntax Description

source

run a script (python, tcl,...) from bootflash:scripts
copy-sys

copy the system provided example scripts of /sys to bootflash:scripts

Command Modes

  • /exec

source ip

[no] source ip ipaddress

Syntax Description

no

Negate a command or set its defaults
source

Source IP address configuration
ip

Configure source IP address
ipaddress

Type: ipaddr

Command Modes

  • /exec/configure/config-monitor-erspan-dst

source proxy-layer2-gateway tree-id switchid tx

[no] source proxy-layer2-gateway tree-id tree-id switchid switchid tx

Syntax Description

no

Negate a command or set its defaults
source

Source configuration
proxy-layer2-gateway

proxy layer2 gateway span, only in egress direction
tree-id

Tree-ID integer
tree-id

Type: integer

treeid
switchid

Switchid integer
switchid

Type: integer

switchid
tx

Proxy layer2 gateway is only egress

Command Modes

  • /exec/configure/monitor-local-src
  • /exec/configure/config-monitor
  • /exec/configure/config-monitor-erspan-src

source vlan

[no] source vlan vlan_range [src_dir]

Syntax Description

no

Negate a command or set its defaults
source

Source configuration
vlan

Vlan type

vlan_range

Type: vlan-mrange
src_dir

Source direction

rx  value: 1
ingress

Command Modes

  • /exec/configure/monitor-local-src
  • /exec/configure/config-monitor
  • /exec/configure/config-monitor-erspan-src

spanning-tree bpdufilter

spanning-tree bpdufilter port-bpdufilter | no spanning-tree bpdufilter [port-bpdufilter]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

bpdufilter

Don't send or receive BPDUs on this interface
port-bpdufilter

Don't send or receive BPDUs on this interface

enable  value: 1
Enable BPDU filtering for this interface
disable  value: 2
Disable BPDU filtering for this interface

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree bpduguard

spanning-tree bpduguard port-bpduguard | no spanning-tree bpduguard [port-bpduguard]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

bpduguard

Don't accept BPDUs on this interface
port-bpduguard

Don't accept BPDUs on this interface

enable  value: 1
Enable BPDU Guard for this interface
disable  value: 2
Disable BPDU Guard for this interface

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree bridge assurance

[no] spanning-tree bridge assurance

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

bridge

Spanning tree bridge options
assurance

Enable Bridge Assurance on all network ports

Command Modes

  • /exec/configure

spanning-tree cost

spanning-tree [ vlan vlan-id ] cost port-cost | no spanning-tree [ vlan vlan-id ] cost [port-cost]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees
vlan-id

Type: vlan-mrange

vlan range, Example: 1,3-5,7,9-11
cost

Change an interface's spanning tree port path cost
port-cost

Type: uinteger

min: 1  max: 200000000  

port path cost

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree cost auto

[no] spanning-tree [ vlan vlan-id ] cost auto

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees
vlan-id

Type: vlan-mrange

vlan range, Example: 1,3-5,7,9-11
cost

Change an interface's spanning tree port path cost
auto

Determine cost based on media speed of this interface

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree fcoe

[no] spanning-tree fcoe

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

fcoe

Enable STP for FCoE VLANs

Command Modes

  • /exec/configure

spanning-tree guard

spanning-tree guard guard-type | no spanning-tree guard [guard-type]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

guard

Change an interface's spanning tree guard mode
guard-type

Change an interface's spanning tree guard mode

root  value: 1
Set guard mode to root guard on interface
loop  value: 2
Set guard mode to loop guard on interface
none  value: 3
Set guard mode to none

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree lc-issu (stp_full)

spanning-tree lc-issu port-issu-type | no spanning-tree lc-issu [port-issu-type]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

lc-issu

Configure Linecard ISSU type
port-issu-type

ISSU Type

disruptive  value: 1
ISSU will be forced to be Disruptive
non-disruptive  value: 2
ISSU will be forced to be Non-Disruptive
auto  value: 3
ISSU type will Auto-detected

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree lc-issu (stp_full)

spanning-tree lc-issu issu-type | no spanning-tree lc-issu [issu-type]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

lc-issu

Configure Linecard ISSU type
issu-type

ISSU Type

disruptive  value: 1
ISSU will be forced to be Disruptive
non-disruptive  value: 2
ISSU will be forced to be Non-Disruptive
auto  value: 3
ISSU type will Auto-detected

Command Modes

  • /exec/configure

spanning-tree link-type

spanning-tree link-type link-type-val | no spanning-tree link-type [link-type-val]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

link-type

Specify a link type for spanning tree tree protocol use
link-type-val

Specify a link type for spanning tree tree protocol use

point-to-point  value: 1
Consider the interface as point-to-point
shared  value: 2
Consider the interface as shared
auto  value: 3
Detemine link type based on media duplex of this interface

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree loopguard default

[no] spanning-tree loopguard default

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

loopguard

Spanning tree loopguard options
default

Enable loopguard by default on all ports

Command Modes

  • /exec/configure

spanning-tree mode

spanning-tree mode stp-mode | no spanning-tree mode [stp-mode]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mode

Spanning Tree operating mode
stp-mode

Spanning Tree operating mode

rapid-pvst  value: 5
Per-Vlan spanning tree mode
mst  value: 4
Multiple spanning tree mode

Command Modes

  • /exec/configure

spanning-tree mst configuration

spanning-tree mst configuration

Syntax Description

spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

configuration

Enter MST configuration submode

Command Modes

  • /exec/configure

spanning-tree mst cost

spanning-tree mst mst-id cost port-cost | no spanning-tree mst mst-id cost [port-cost]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree
mst-id

Type: integer-mrange

MST instance list, example 0,2-4,6,8-12
cost

Change an interface's spanning tree port path cost
port-cost

Type: uinteger

min: 1  max: 200000000  

port path cost

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree mst cost auto

[no] spanning-tree mst mst-id cost auto

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree
mst-id

Type: integer-mrange

MST instance list, example 0,2-4,6,8-12
cost

Change an interface's spanning tree port path cost
auto

Determine cost based on media speed of this interface

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree mst forward-time

spanning-tree mst forward-time fwd-time | no spanning-tree mst forward-time [fwd-time]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

forward-time

Set the forward delay for the spanning tree
fwd-time

Type: uinteger

min: 4  max: 30  

number of seconds for the forward delay timer

Command Modes

  • /exec/configure

spanning-tree mst hello-time

spanning-tree mst hello-time hello-time-val | no spanning-tree mst hello-time [hello-time-val]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

hello-time

Set the hello interval for the spanning tree
hello-time-val

Type: uinteger

min: 1  max: 10  

number of seconds between generation of config bpdu

Command Modes

  • /exec/configure

spanning-tree mst max-age

spanning-tree mst max-age max-age-val | no spanning-tree mst max-age [max-age-val]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

max-age

Set the max age interval for the spanning tree
max-age-val

Type: uinteger

min: 6  max: 40  

maximum number of seconds the information in a bpdu is valid

Command Modes

  • /exec/configure

spanning-tree mst max-hops

spanning-tree mst max-hops max-hops-val | no spanning-tree mst max-hops [max-hops-val]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

max-hops

Set the max hops value for the spanning tree
max-hops-val

Type: uinteger

min: 1  max: 255  

maximum number of hops a BPDU is valid

Command Modes

  • /exec/configure

spanning-tree mst port-priority

spanning-tree mst mst-id port-priority port-prio | no spanning-tree mst mst-id port-priority [port-prio]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree
mst-id

Type: integer-mrange

MST instance list, example 0,2-4,6,8-12
port-priority

Change an interface's spanning tree port priority
port-prio

Type: uinteger

min: 0  max: 240  

port priority in increments of 32

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree mst pre-standard

[no] spanning-tree mst pre-standard

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree
pre-standard

Force pre-standard MST BPDU transmission on port

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree mst priority

spanning-tree mst mst-id priority prio | no spanning-tree mst mst-id priority [prio]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

mst-id

Type: integer-mrange

MST instance range, example: 0-3,5,7-9
priority

Set the bridge priority for the spanning tree
prio

Type: uinteger

min: 0  max: 61440  

bridge priority in increments of 4096

Command Modes

  • /exec/configure

spanning-tree mst root

spanning-tree mst mst-id root root-type [ diameter diameter-val [ hello-time hello-time-val ] ] | no spanning-tree mst mst-id root [ root-type [ diameter diameter-val [ hello-time hello-time-val ] ] ]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

mst-id

Type: integer-mrange

MST instance range, example: 0-3,5,7-9
diameter

Network diameter of this spanning tree
diameter-val

Type: uinteger

min: 2  max: 7  

Maximum number of bridges between any two end nodes
root

configure switch as root
root-type

configure switch as root

primary  value: 1
Configure this switch as primary root for this spanning tree
secondary  value: 2
Configure switch as secondary root
hello-time

Set the hello interval for the spanning tree
hello-time-val

Type: uinteger

min: 1  max: 10  

number of seconds between generation of config bpdu

Command Modes

  • /exec/configure

spanning-tree mst simulate pvst

[no] spanning-tree mst simulate pvst [simpvst-disable]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree
simulate

Enable spanning tree simulation
pvst

Enable PVST simulation
simpvst-disable

Disable PVST simulation on this interface

disable  value: 2
Disable PVST simulation on this interface

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree mst simulate pvst global

[no] spanning-tree mst simulate pvst global

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

mst

Multiple spanning tree configuration

simulate

Enable spanning tree simulation
pvst

Enable PVST simulation
global

Enable PVST Simulation by default on all ports

Command Modes

  • /exec/configure

spanning-tree pathcost method

spanning-tree pathcost method method-val | no spanning-tree pathcost method [method-val]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

pathcost

Spanning tree pathcost options
method

Method to calculate default port path cost
method-val

Method to calculate default port path cost

long  value: 2
Use 32 bit based values for default port path costs
short  value: 1
Use 16 bit based values for default port path costs

Command Modes

  • /exec/configure

spanning-tree port-priority

spanning-tree [ vlan vlan-id ] port-priority port-prio | no spanning-tree [ vlan vlan-id ] port-priority [port-prio]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees
vlan-id

Type: vlan-mrange

vlan range, Example: 1,3-5,7,9-11
port-priority

Change an interface's spanning tree port priority
port-prio

Type: uinteger

min: 0  max: 224  

port priority in increments of 32

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree port type

spanning-tree port type port-type | no spanning-tree port type [port-type]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

port

Spanning tree port options
type

Specify a port type for spanning tree protocol use
port-type

Specify a port type for spanning tree protocol use

edge  value: 5
Consider the interface as edge port (enable portfast)
network  value: 4
Consider the interface as inter-switch link
normal  value: 2
Consider the interface as normal spanning tree port

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree port type edge bpdufilter default

[no] spanning-tree port type edge bpdufilter default

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

port

Spanning tree port options
type

Specify a port type for spanning tree protocol use
edge

Consider the interface as edge port (enable portfast)
bpdufilter

Enable edge port (portfast) bpdu filter on this switch
default

Enable bdpu filter by default on all edge (portfast) ports

Command Modes

  • /exec/configure

spanning-tree port type edge bpduguard default

[no] spanning-tree port type edge bpduguard default

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

port

Spanning tree port options
type

Specify a port type for spanning tree protocol use
edge

Consider the interface as edge port (enable portfast)
bpduguard

Enable edge port (portfast) bpdu guard on this switch
default

Enable bdpu guard by default on all edge (portfast) ports

Command Modes

  • /exec/configure

spanning-tree port type edge default

[no] spanning-tree port type edge default

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

port

Spanning tree port options
type

Specify a port type for spanning tree protocol use
edge

Consider the interface as edge port (enable portfast)
default

Select edge port type by default on all access ports

Command Modes

  • /exec/configure

spanning-tree port type edge trunk

spanning-tree port type edge trunk | no spanning-tree port type edge [trunk]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

port

Spanning tree port options
type

Specify a port type for spanning tree protocol use
edge

Consider the interface as edge port (enable portfast)
trunk

Consider the interface as edge port (enable portfast) even in trunk mode

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree port type network default

[no] spanning-tree port type network default

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

port

Spanning tree port options
type

Specify a port type for spanning tree protocol use
network

Consider the interface as inter-switch link
default

Select network port type by default on all ports

Command Modes

  • /exec/configure

spanning-tree portfast

spanning-tree portfast [port-portfast] | no spanning-tree portfast [port-portfast]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

portfast

Enable an interface to move directly to fwd on link up
port-portfast

Enable an interface to move directly to fwd on link up

trunk  value: 3
Enable portfast on the interface even in trunk mode
disable  value: 2
Disable portfast for this interface

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-ethernet-switch-m

spanning-tree portfast bpdufilter default

[no] spanning-tree portfast bpdufilter default

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

portfast

Enable an interface to move directly to fwd on link up
bpdufilter

Enable portfast bpdu filter on this switch
default

Enable bdpu filter by default on all portfast ports

Command Modes

  • /exec/configure

spanning-tree portfast bpduguard default

[no] spanning-tree portfast bpduguard default

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

portfast

Enable an interface to move directly to fwd on link up
bpduguard

Enable portfast bpdu guard on this switch
default

Enable bdpu guard by default on all portfast ports

Command Modes

  • /exec/configure

spanning-tree portfast default

[no] spanning-tree portfast default

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

portfast

Enable an interface to move directly to fwd on link up
default

Enable portfast by default on all access ports

Command Modes

  • /exec/configure

spanning-tree pseudo-information

spanning-tree pseudo-information

Syntax Description

spanning-tree

Spanning Tree Subsystem

pseudo-information

configure spanning tree pseudo information

Command Modes

  • /exec/configure

spanning-tree vlan

[no] spanning-tree vlan vlan-id

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees
vlan-id

Type: vlan-mrange

vlan range, Example: 1,3-5,7,9-11

Command Modes

  • /exec/configure

spanning-tree vlan forward-time

spanning-tree vlan vlan-id forward-time fwd-time | no spanning-tree vlan vlan-id forward-time [fwd-time]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees
vlan-id

Type: vlan-mrange

vlan range, Example: 1,3-5,7,9-11
forward-time

Set the forward delay for the spanning tree
fwd-time

Type: uinteger

min: 4  max: 30  

number of seconds for the forward delay timer

Command Modes

  • /exec/configure

spanning-tree vlan hello-time

spanning-tree vlan vlan-id hello-time hello-time-val | no spanning-tree vlan vlan-id hello-time [hello-time-val]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees
vlan-id

Type: vlan-mrange

vlan range, Example: 1,3-5,7,9-11
hello-time

Set the hello interval for the spanning tree
hello-time-val

Type: uinteger

min: 1  max: 10  

number of seconds between generation of config bpdu

Command Modes

  • /exec/configure

spanning-tree vlan max-age

spanning-tree vlan vlan-id max-age max-age-val | no spanning-tree vlan vlan-id max-age [max-age-val]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees
vlan-id

Type: vlan-mrange

vlan range, Example: 1,3-5,7,9-11
max-age

Set the max age interval for the spanning tree
max-age-val

Type: uinteger

min: 6  max: 40  

maximum number of seconds the information in a bpdu is valid

Command Modes

  • /exec/configure

spanning-tree vlan priority

spanning-tree vlan vlan-id priority prio | no spanning-tree vlan vlan-id priority [prio]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees
vlan-id

Type: vlan-mrange

vlan range, Example: 1,3-5,7,9-11
priority

Set the bridge priority for the spanning tree
prio

Type: uinteger

min: 0  max: 61440  

bridge priority in increments of 4096

Command Modes

  • /exec/configure

spanning-tree vlan root

spanning-tree vlan vlan-id root root-type [ diameter diameter-val [ hello-time hello-time-val ] ] | no spanning-tree vlan vlan-id root [ root-type [ diameter diameter-val [ hello-time hello-time-val ] ] ]

Syntax Description

no

Negate a command or set its defaults
spanning-tree

Spanning Tree Subsystem

vlan

VLAN Switch Spanning Trees
vlan-id

Type: vlan-mrange

vlan range, Example: 1,3-5,7,9-11
diameter

Network diameter of this spanning tree
diameter-val

Type: uinteger

min: 2  max: 7  

Maximum number of bridges between any two end nodes
root

configure switch as root
root-type

configure switch as root

primary  value: 1
Configure this switch as primary root for this spanning tree
secondary  value: 2
Configure switch as secondary root
hello-time

Set the hello interval for the spanning tree
hello-time-val

Type: uinteger

min: 1  max: 10  

number of seconds between generation of config bpdu

Command Modes

  • /exec/configure

speed (if_manager)

speed { speed_val | auto [ 100 [1000] ] } | no speed [ speed_val | auto [ 100 [1000] ] ]

Syntax Description

no

Negate a command or set its defaults
speed

Enter the port speed
speed_val

Interface port speed

100  value: 100
100Mb/s
1000  value: 1000
1Gb/s
auto

auto negotiate speed
10

10 Mbps speed
100

100 Mbps speed
1000

1000 Mbps speed

Command Modes

  • /exec/configure/if-mgmt-ether

speed (syscli)

[no] speed i0

Syntax Description

no

Negate a command or set its defaults
speed

Set the transmit and receive speeds
i0

Type: integer

min: 9600  max: 115200  

Transmit and receive speeds

Command Modes

  • /exec/configure/console

speed-group

speed-group gspeed_val | no speed-group [gspeed_val]

Syntax Description

no

Negate a command or set its defaults
speed-group

port group speed
gspeed_val

Interface port speed

10000  value: 10000
10Gb/s
40000  value: 40000
40Gb/s

Command Modes

  • /exec/configure/if-eth-base

speed (if_manager)

speed { speed_val | auto [ 100 [1000] ] } | no speed [ speed_val | auto [ 100 [1000] ] ]

Syntax Description

no

Negate a command or set its defaults
speed

Enter the port speed
speed_val

Interface port speed
auto

auto negotiate speed
10

10 Mbps speed
100

100 Mbps speed
1000

1000 Mbps speed

Command Modes

  • /exec/configure/if-ethernet-all
  • /exec/configure/if-eth-non-member
  • /exec/configure/if-port-channel

speed (syscli)

[no] speed i0

Syntax Description

no

Negate a command or set its defaults
speed

Set the transmit and receive speeds
i0

Type: integer

min: 300  max: 115200  

Transmit and receive speeds

Command Modes

  • /exec/configure/com1

spf-interval

spf-interval level max-wait [ initial-wait second-wait ] | no spf-interval level max-wait [ initial-wait second-wait ]

Syntax Description

no

Negate a command or set its defaults
spf-interval

Configure SPF interval
level

IS-IS level

level-1  value: 1
Configure SPF level-1 interval
level-2  value: 2
Configure SPF level-2 interval
max-wait

Type: uinteger

min: 50  max: 120000  default: 8000

Maximum wait between trigger and SPF computation (milli-secs)
initial-wait

Type: uinteger

min: 50  max: 120000  default: 50

Initial wait between trigger and SPF computation (milli-secs)
second-wait

Type: uinteger

min: 50  max: 120000  default: 50

Second wait between trigger and SPF computation (milli-secs)

Command Modes

  • /exec/configure/router-isis/router-isis-vrf-common

spf mode incremental (ospf)

[no] spf mode incremental

Syntax Description

no

Negate a command or set its defaults
spf

Configure route computation related settings
mode

Set the mode of spf computation
incremental

If possible, recompute only parts of the SPT

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

spf mode incremental (ospfv3)

[no] spf mode incremental

Syntax Description

no

Negate a command or set its defaults
spf

Configure route computation related settings
mode

Set the mode of spf computation
incremental

If possible, recompute only parts of the SPT

Command Modes

  • /exec/configure/router-ospf3/router-ospf3-af-ipv6
  • /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

split-horizon eigrp

[no] { ip | ipv6 } split-horizon eigrp eigrp-ptag

Syntax Description

no

Negate a command or set its defaults
ip

Configure IP features
ipv6

Configure IPv6 features
split-horizon

Configures IP-EIGRP split-horizon on interface
eigrp

EIGRP interface configuration commands
eigrp-ptag

Type: string

pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events

length: 20

Process tag

Command Modes

  • /exec/configure/if-igp

sprom recover backplane

sprom recover backplane i0

Syntax Description

sprom

set SPROM contents should be done very carefully
recover

SPROM recovery
backplane

set backplane module sprom contents
i0

Type: integer

min: 1  max: 2  

please enter instance of backplane sprom

Command Modes

  • /exec

ssh

ssh s0 [ [ vrf { vrf-name | vrf-known-name } ] [ source-ip s1 ] ]

Syntax Description

ssh

SSH to another system
vrf

Display per-VRF information
source-ip

ip address to bind
s0

Type: string

antipattern: key | login-attempts

length: 64

Enter hostname or user@hostname
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name
s1

Type: string

length: 64

Enter source ip address to bind

Command Modes

  • /exec

ssh6

ssh6 s0 [ [ vrf { vrf-name | vrf-known-name } ] [ source-ip s2 ] [ interface s1 ] ]

Syntax Description

ssh6

SSH to another system using IPv6 addressing
vrf

vrf to use
source-ip

ip address to bind
interface

interface to bind
s0

Type: string

length: 64

Enter hostname or user@hostname
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name
s2

Type: string

length: 64

Enter source ip address to bind
s1

Type: string

length: 64

Enter interface to bind

Command Modes

  • /exec

ssh key dsa force rsa

ssh key { dsa [force] | rsa [ { i0 | oldrange } [force] ] } | no ssh key [ dsa [force] | rsa [ { i0 | oldrange } [force] ] ]

Syntax Description

no

Negate a command or set its defaults
ssh

SSH to another system
key

Generate SSH Key
dsa

Generate DSA keys
force

Force the generation of keys even if previous ones are present
rsa

Generate RSA keys
i0

Type: integer

min: 1024  max: 2048  

Enter number of bits (in multiples of 8)
oldrange

Type: integer

min: 768  max: 1023  

Enter number of bits
force

Force the generation of keys even if previous ones are present
force

Force the generation of keys even if previous ones are present

Command Modes

  • /exec/configure

ssh login-attempts

ssh login-attempts d0 | no ssh login-attempts [d0]

Syntax Description

no

Negate a command or set its defaults
ssh

SSH to another system
login-attempts

Set maximum login attempts from ssh
d0

Type: integer

min: 1  max: 10  

Specify max-attempt number

Command Modes

  • /exec/configure/

ssh server enable

[no] ssh server enable

Syntax Description

no

Negate a command or set its defaults
ssh

Configure SSH parameters
server

Configure SSH Server parameters
enable

Enable SSH server

Command Modes

  • /exec/configure

state (vlan_mgr_cli)

state vstate | no state

Syntax Description

no

Negate a command or set its defaults
state

Operational state of the VLAN
vstate
active  value: 1
VLAN Active State
suspend  value: 2
VLAN Suspended State

Command Modes

  • /exec/configure/vlan

state (vlan_mgr_cli)

state vstate | no state

Syntax Description

no

Negate a command or set its defaults
state

Operational state of the VLAN
vstate
active  value: 1
VLAN Active State
suspend  value: 2
VLAN Suspended State

Command Modes

  • /exec/configure/vlan

stateful-ha (isis)

[no] stateful-ha [test-recovery]

Syntax Description

no

Negate a command or set its defaults
stateful-ha

Enable stateful IS-IS HA
test-recovery

Test stateful HA recovery

Command Modes

  • /exec/configure/router-isis/router-isis-vrf-common

stateful-ha (rsvp)

[no] stateful-ha [pss-partial-lsp]

Syntax Description

'no'

Negate a command or set its defaults
stateful-ha

Configure RSVP stateful HA
pss-partial-lsp

Enable PSS of partial lsps

Command Modes

  • /exec/configure/ip-rsvp

statistics (aclmgr)

[no] statistics

Syntax Description

no

Negate a command or set its defaults
statistics

Enable statistics for the ACL

Command Modes

  • /exec/configure/ipv6acl

statistics (aclmgr)

[no] statistics

Syntax Description

no

Negate a command or set its defaults
statistics

Enable statistics for the ACL

Command Modes

  • /exec/configure/macacl

statistics (aclmgr)

[no] statistics

Syntax Description

no

Negate a command or set its defaults
statistics

Enable per-entry statistics for the ACL

Command Modes

  • /exec/configure/ipacl
  • /exec/configure/vacl

statistics per-entry (aclmgr)

[no] statistics per-entry

Syntax Description

no

Negate a command or set its defaults
statistics

Enable per-entry statistics for the ACL
per-entry

Collect stats for each ACL entry

Command Modes

  • /exec/configure/ipv6acl

statistics per-entry (aclmgr)

[no] statistics per-entry

Syntax Description

no

Negate a command or set its defaults
statistics

Enable per-entry statistics for the ACL
per-entry

Collect stats for each ACL entry

Command Modes

  • /exec/configure/macacl

statistics per-entry (aclmgr)

[no] statistics per-entry

Syntax Description

no

Negate a command or set its defaults
statistics

Enable per-entry statistics for the ACL
per-entry

Collect stats for each ACL entry

Command Modes

  • /exec/configure/ipacl
  • /exec/configure/vacl

stopbits (syscli)

[no] stopbits 1

Syntax Description

no

Negate a command or set its defaults
stopbits

Set async line stopbits
1

One stop bit

Command Modes

  • /exec/configure/console

stopbits (syscli)

[no] stopbits { 1 | 2 }

Syntax Description

no

Negate a command or set its defaults
stopbits

Set async line stopbits
1

One stop bit
2

Two stop bits

Command Modes

  • /exec/configure/com1

storm-control

storm-control { broadcast blevel | multicast mlevel | unicast ulevel } level | no storm-control { broadcast blevel | multicast mlevel | unicast ulevel } [level]

Syntax Description

no

Negate a command or set its defaults
storm-control

Configure Interface storm control
broadcast

Broadcast address storm control
multicast

Multicast address storm control
unicast

Unicast address storm control
blevel

Set allowed broadcast traffic level on this interface
mlevel

Set allowed multicast traffic level on this interface
ulevel

Set allowed unicast traffic level on this interface
level

Type: float

Enter the storm suppression level

Command Modes

  • /exec/configure/if-ethernet-all
  • /exec/configure/if-eth-non-member
  • /exec/configure/if-port-channel

streetaddress

streetaddress line | no streetaddress

Syntax Description

no

Negate a command or set its defaults
streetaddress

Configure replacement part shipping address.
line

Type: remainder

Provide street address (white spaces are fine)

Command Modes

  • /exec/configure/callhome

summary-address (isis)

summary-address ipv6-prefix level | no summary-address ipv6-prefix [level]

Syntax Description

no

Negate a command or set its defaults
summary-address

Configure IP address summaries
ipv6-prefix

Type: ipv6prefix

IPv6 summary prefix
level

Level to summarize into

level-1  value: 1
Summarize into level-1 area
level-2  value: 2
Summarize into level-2 area
level-1-2  value: 3
Summarize into level-1 and level-2 area

Command Modes

  • /exec/configure/router-isis/router-isis-af-ipv6

summary-address (isis)

summary-address { ip-addr ip-mask | ip-prefix } level | no summary-address { ip-addr ip-mask | ip-prefix } [level]

Syntax Description

no

Negate a command or set its defaults
summary-address

Configure IP address summaries
ip-addr

Type: ipaddr

IP summary address
ip-mask

Type: ipaddr

IP summary mask
ip-prefix

Type: ipprefix

IP summary prefix
level

Level to summarize into

level-1  value: 1
Summarize into level-1 area
level-2  value: 2
Summarize into level-2 area
level-1-2  value: 3
Summarize into level-1 and level-2 area

Command Modes

  • /exec/configure/router-isis/router-isis-vrf-common
  • /exec/configure/router-isis/router-isis-af-ipv4

summary-address (ospf)

[no] summary-address { ip-dest ip-mask | ip-prefix } [ tag tagval | not-advertise ]

Syntax Description

no

Negate a command or set its defaults
summary-address

Configure route summarization for redistribution
ip-dest

Type: ipaddr

IP prefix format: i.i.i.i
ip-mask

Type: ipaddr

IP network mask format: m.m.m.m
ip-prefix

Type: ipprefix

IP prefix format: x.x.x.x/ml
tag

32-bit tag value
tagval

Type: integer

min: 1  max: 65535  

32-bit tag value
not-advertise

Supress advertising the specified summary

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

summary-address (ospfv3)

[no] summary-address ipv6-prefix [ tag tagval | not-advertise ]

Syntax Description

no

Negate a command or set its defaults
summary-address

Configure route summarization for redistribution
ipv6-prefix

Type: ipv6prefix

IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128
tag

32-bit tag value
tagval

Type: integer

min: 1  max: 65535  

32-bit tag value
not-advertise

Supress advertising the specified summary

Command Modes

  • /exec/configure/router-ospf3/router-ospf3-af-ipv6
  • /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

suppress-fib-pending

[no] suppress-fib-pending

Syntax Description

no

Negate a command or set its defaults
suppress-fib-pending

Advertise only routes that are programmed in hardware to peers

Command Modes

  • /exec/configure/router-bgp/vrf-cmds

suppress-inactive (bgp)

[ no | default ] suppress-inactive

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
suppress-inactive

Advertise only active routes to peer

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt

suppress-inactive (bgp)

[ no | default ] suppress-inactive

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
suppress-inactive

Advertise only active routes to peers

Command Modes

  • /exec/configure/router-bgp/router-bgp-af

suppress-signaling-protocol ldp

[ no | default ] suppress-signaling-protocol ldp

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
suppress-signaling-protocol

Suppress VPLS BGP AD protocol Not available in this release.
ldp

LDP signaling

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

switch-priority (callhome)

switch-priority i0 | no switch-priority

Syntax Description

no

Negate a command or set its defaults
switch-priority

Priority of the switch(0-highest 7-lowest)
i0

Type: integer

min: 0  max: 7  

Priority of the switch(0-highest 7-lowest)

Command Modes

  • /exec/configure/callhome

switch-priority (satmgr)

switch-priority priority | no switch-priority

Syntax Description

no

Negate the command
switch-priority

Switch priority
priority

Type: integer

min: 1  max: 65535  

Priority

Command Modes

  • /exec/configure/fex

switchback

switchback

Syntax Description

switchback

switchback to default vdc

Command Modes

  • /exec

switchport

switchport

Syntax Description

switchport

Configure switchport parameters

Command Modes

  • /exec/configure/if-port-channel
  • /exec/configure/if-eth-non-member
  • /exec/configure/if-ethernet-all

switchport access vlan (vlan_mgr_cli)

switchport access vlan vlan-id-access | no switchport access vlan

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
access

Set access mode characteristics of the interface

vlan

Set VLAN when interface is in access mode
vlan-id-access

Type: vlan

VLAN ID of the VLAN when this port is in access mode

Command Modes

  • /exec/configure/if-ethernet-all

switchport access vlan (vlan_mgr_cli)

switchport access vlan vlan-id-access | no switchport access vlan

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
access

Set access mode characteristics of the interface

vlan

Set VLAN when interface is in access mode
vlan-id-access

Type: vlan

VLAN ID of the VLAN when this port is in access mode

Command Modes

  • /exec/configure/if-eth-port-channel-switch

switchport access vlan (vlan_mgr_cli)

switchport access vlan vlan-id-access | no switchport access vlan

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
access

Set access mode characteristics of the interface

vlan

Set VLAN when interface is in access mode
vlan-id-access

Type: vlan

VLAN ID of the VLAN when this port is in access mode

Command Modes

  • /exec/configure/if-ethernet-switch
  • /exec/configure/if-ethernet-p2p-switch
  • /exec/configure/if-remote-ethernet-switch

switchport autostate exclude

[no] switchport autostate exclude

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
autostate

Include or exclude this port from vlan link up calculation Not available in this release.
exclude

Exclude this port from vlan link up calculation Not available in this release.

Command Modes

  • /exec/configure/if-ethernet-switch
  • /exec/configure/if-ethernet-all
  • /exec/configure/if-gig-ether
  • /exec/configure/if-port-channel-range
  • /exec/configure/if-eth-port-channel-switch

switchport host

[no] switchport host

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
host

Set port host

Command Modes

  • /exec/configure/if-eth-l2-non-member
  • /exec/configure/if-ethernet-switch
  • /exec/configure/if-ethernet-switch-m
  • /exec/configure/if-ethernet-all

switchport mode

switchport mode port_mode | no switchport mode

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
mode

Enter the port mode

port_mode

port mode

access  value: 0x00080000
port mode access
trunk  value: 0x00100000
port mode trunk

Command Modes

  • /exec/configure/if-eth-l2-non-member
  • /exec/configure/if-ethernet-all
  • /exec/configure/if-eth-port-channel-switch

switchport mode fabricpath

[no] switchport mode fabricpath

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
mode

Enter the port mode

fabricpath

port mode fabricpath

Command Modes

  • /exec/configure/if-eth-l2-non-member
  • /exec/configure/if-ethernet-all
  • /exec/configure/if-eth-port-channel-switch

switchport mode private-vlan

switchport mode private-vlan pvlan_mode | no switchport mode private-vlan [pvlan_mode]

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
mode

Enter the port mode

private-vlan

Set port mode to private-vlan host or promiscuous Not available in this release.
pvlan_mode

private vlan mode

host  value: 0x00400000
port mode pvlan host
promiscuous  value: 0x00800000
port mode pvlan promiscuous

Command Modes

  • /exec/configure/if-ethernet-switch
  • /exec/configure/if-ethernet-all

switchport mode private-vlan trunk

switchport mode private-vlan trunk trunk_mode | no switchport mode private-vlan trunk [trunk_mode]

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
mode

Enter the port mode
private-vlan

Set port mode to private-vlan host or promiscuous or trunk promiscuous or trunk-promiscuous or trunk-isolated

trunk

private-vlan trunk

trunk_mode

private vlan trunk mode

promiscuous  value: 0x10000000
port mode trunk promiscuous
secondary  value: 0x20000000
port mode trunk isolated

Command Modes

  • /exec/configure/if-ethernet-switch
  • /exec/configure/if-ethernet-all

switchport monitor

switchport monitor [ ingress [learning] ] | no switchport monitor

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
monitor

Configures an interface as span-destination
ingress

Enables the forwarding on incoming packets

learning

Enables mac-learning

Command Modes

  • /exec/configure/if-eth-l2-non-member
  • /exec/configure/if-ethernet-all
  • /exec/configure/if-eth-port-channel-switch

switchport port-security

[no] switchport port-security

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
port-security

Port security related command Not available in this release.

Command Modes

  • /exec/configure/if-switching

switchport port-security aging time

[no] switchport port-security aging time value

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
port-security

Port security related command

aging

Port-security aging commands
time

Port-security aging time
value

Type: uinteger

min: 1  max: 1440  

Aging time in minutes. Enter a value between 1 and 1440

Command Modes

  • /exec/configure/if-switching

switchport port-security aging type

[no] switchport port-security aging type { absolute | inactivity }

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
port-security

Port security related command

aging

Port-security aging commands
type

Type of timers
absolute

Absolute Timer
inactivity

Inactivity Timer

Command Modes

  • /exec/configure/if-switching

switchport port-security mac-address

[no] switchport port-security mac-address mac-address [ vlan vlanid ]

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
port-security

Port security related command

mac-address

MAC address
mac-address

Type: ethernet

48 bit mac address format HHHH.HHHH.HHHH
vlan

Vlan on which the mac address should be secured
vlanid

Type: vlan

vlan id. Enter a value between 1 and 4094

Command Modes

  • /exec/configure/if-switching

switchport port-security mac-address sticky

[no] switchport port-security mac-address sticky

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
port-security

Port security related command

mac-address

MAC address
sticky

Sticky MAC address

Command Modes

  • /exec/configure/if-switching

switchport port-security maximum

[no] switchport port-security maximum value [ vlan vlanid ]

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
port-security

Port security related command

maximum

Max secure addresses
value

Type: uinteger

min: 1  max: 1025  

Maximum addresses 1 to 1025
vlan

Vlan on which the mac address should be secured
vlanid

Type: uinteger

min: 1  max: 4094  

vlan id. Enter a value between 1 and 4094

Command Modes

  • /exec/configure/if-switching

switchport port-security violation

[no] switchport port-security violation { protect | restrict | shutdown }

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
port-security

Port security related command

violation

Security violation mode
protect

security violation protect mode
restrict

security violation restrict mode
shutdown

security violation shutdown mode

Command Modes

  • /exec/configure/if-switching

switchport private-vlan association trunk

switchport private-vlan association trunk primary-vlan secondary-vlan | no switchport private-vlan association trunk [ primary-vlan [secondary-vlan] ]

Syntax Description

switchport

Configure switchport parameters
private-vlan

Set the private VLAN configuration

association

private vlan trunk association
trunk

private-vlan trunk secondary
no

Negate a command or set its defaults
primary-vlan

Type: vlan

Primary VLAN ID
secondary-vlan

Type: vlan

Secondary VLAN ID

Command Modes

  • /exec/configure/if-switching

switchport private-vlan host-association

switchport private-vlan host-association primary-vlan secondary-vlan | no switchport private-vlan host-association

Syntax Description

switchport

Configure switchport parameters
private-vlan

Set the private VLAN configuration

host-association

Set the private VLAN host association
no

Negate a command or set its defaults
primary-vlan

Type: vlan

Primary VLAN ID
secondary-vlan

Type: vlan

Secondary VLAN ID

Command Modes

  • /exec/configure/if-switching

switchport private-vlan mapping add remove

switchport private-vlan mapping primary-vlan [ add | remove ] secondary_vlans | no switchport private-vlan mapping [ primary-vlan secondary_vlans ]

Syntax Description

switchport

Configure switchport parameters
private-vlan

Set the private VLAN configuration

mapping

Set the private VLAN access/trunk promiscuous mapping
add

Add a VLAN to private VLAN list
remove

Remove a VLAN from private VLAN list
no

Negate a command or set its defaults
primary-vlan

Type: vlan

Primary private VLAN
secondary_vlans

Type: vlan-mrange

Secondary VLAN IDs

Command Modes

  • /exec/configure/if-switching

switchport private-vlan mapping add remove trunk

switchport private-vlan mapping trunk primary-vlan [ add | remove ] secondary_vlans | no switchport private-vlan mapping trunk [ primary-vlan [secondary_vlans] ]

Syntax Description

switchport

Configure switchport parameters
private-vlan

Set the private VLAN configuration Not available in this release.
mapping

Set the private VLAN access/trunk promiscuous mapping
add

Add a VLAN to private VLAN list
remove

Remove a VLAN from private VLAN list
no

Negate a command or set its defaults
trunk

private-vlan trunk promiscuous
primary-vlan

Type: vlan

Primary private VLAN
secondary_vlans

Type: vlan-mrange

Secondary VLAN IDs

Command Modes

  • /exec/configure/if-switching

switchport private-vlan trunk allowed vlan

switchport private-vlan trunk allowed vlan { allowed-vlans | add add-vlans | except except-vlans | remove remove-vlans | all | none } | no switchport private-vlan trunk allowed vlan no-allowed-vlans

Syntax Description

switchport

Configure switchport parameters
private-vlan

Set the private VLAN configuration

trunk

Set the private vlan trunking configuration
allowed

Set allowed VLANs when interface is in private-vlan trunking mode
vlan

VLAN status
allowed-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when interface is in private-vlan trunking mode
add

add VLANs to the current list
add-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when interface is in private-vlan trunking mode
except

all VLANs except the following
except-vlans

Type: vlan-mrange

VLAN IDs of disallowed VLANS when this port is in trunking mode
remove

remove VLANs from the current list
remove-vlans

Type: vlan-mrange

VLAN IDs of disallowed VLANS when this port is in trunking mode
all

all VLANs
none

no VLANs
no

Negate a command or set its defaults
no-allowed-vlans

Type: vlan-mrange

VLAN IDs of disallowed VLANs when this port is in trunking mode

Command Modes

  • /exec/configure/if-switching

switchport private-vlan trunk native vlan

switchport private-vlan trunk native vlan native-vlan | no switchport private-vlan trunk native vlan

Syntax Description

switchport

Configure switchport parameters
private-vlan

Set the private VLAN configuration

no

Negate a command or set its defaults
trunk

Set the private vlan trunking configuration
native

Set the private vlan trunking native configuration
vlan

VLAN status
native-vlan

Type: vlan

native vlan id

Command Modes

  • /exec/configure/if-switching

switchport trunk allowed vlan (vlan_mgr_cli)

switchport trunk allowed vlan { allow-vlans | add add-vlans | except except-vlans | remove remove-vlans | all | none } | no switchport trunk allowed vlan

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
trunk

Configure trunking parameters on an interface

allowed

Set allowed VLAN characteristics when interface is in trunking mode
vlan

Set allowed VLANs when interface is in trunking mode
allow-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when this port in trunking mode
add

add VLANs to the current list
add-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when this port in trunking mode
all

all VLANs
except

all VLANs except the following
except-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when this port in trunking mode
none

no VLANs
remove

remove VLANs from the current list
remove-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when this port in trunking mode

Command Modes

  • /exec/configure/if-ethernet-all

switchport trunk allowed vlan (vlan_mgr_cli)

switchport trunk allowed vlan { allow-vlans | add add-vlans | except except-vlans | remove remove-vlans | none | all } | no switchport trunk allowed vlan

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
trunk

Configure trunking parameters on an interface

allowed

Set allowed VLAN characteristics when interface is in trunking mode
vlan

Set allowed VLANs when interface is in trunking mode
allow-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when this port in trunking mode
add

add VLANs to the current list
add-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when this port in trunking mode
all

all VLANs
except

all VLANs except the following
except-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when this port in trunking mode
none

no VLANs
remove

remove VLANs from the current list
remove-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when this port in trunking mode

Command Modes

  • /exec/configure/if-eth-port-channel-switch

switchport trunk allowed vlan (vlan_mgr_cli)

switchport trunk allowed vlan { allow-vlans | add add-vlans | except except-vlans | remove remove-vlans | all | none } | no switchport trunk allowed vlan

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
trunk

Configure trunking parameters on an interface

allowed

Set allowed VLAN characteristics when interface is in trunking mode
vlan

Set allowed VLANs when interface is in trunking mode
allow-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when this port in trunking mode
add

add VLANs to the current list
add-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when this port in trunking mode
all

all VLANs
except

all VLANs except the following
except-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when this port in trunking mode
none

no VLANs
remove

remove VLANs from the current list
remove-vlans

Type: vlan-mrange

VLAN IDs of the allowed VLANs when this port in trunking mode

Command Modes

  • /exec/configure/if-ethernet-switch
  • /exec/configure/if-ethernet-p2p-switch
  • /exec/configure/if-remote-ethernet-switch
  • /exec/configure/if-ethernet-switch

switchport trunk native vlan (vlan_mgr_cli)

switchport trunk native vlan vlan-id-native | no switchport trunk native vlan

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
trunk

Configure trunking parameters on an interface

native

Set trunking native characteristics when interface is in trunking mode
vlan

Set native VLAN when interface is in trunking mode
vlan-id-native

Type: vlan

VLAN ID of the native VLAN when this port is in trunking mode

Command Modes

  • /exec/configure/if-ethernet-all

switchport trunk native vlan (vlan_mgr_cli)

switchport trunk native vlan vlan-id-native | no switchport trunk native vlan

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
trunk

Configure trunking parameters on an interface

native

Set trunking native characteristics when interface is in trunking mode
vlan

Set native VLAN when interface is in trunking mode
vlan-id-native

Type: vlan

VLAN ID of the native VLAN when this port is in trunking mode

Command Modes

  • /exec/configure/if-eth-port-channel-switch

switchport trunk native vlan (vlan_mgr_cli)

switchport trunk native vlan vlan-id-native | no switchport trunk native vlan

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
trunk

Configure trunking parameters on an interface

native

Set trunking native characteristics when interface is in trunking mode
vlan

Set native VLAN when interface is in trunking mode
vlan-id-native

Type: vlan

VLAN ID of the native VLAN when this port is in trunking mode

Command Modes

  • /exec/configure/if-ethernet-switch
  • /exec/configure/if-ethernet-p2p-switch
  • /exec/configure/if-remote-ethernet-switch
  • /exec/configure/if-ethernet-switch

switchport trunk pruning vlan add remove except none all

no switchport trunk pruning vlan [vlan-ids] | switchport trunk pruning vlan vlan-ids | switchport trunk pruning vlan except vlan-ids | switchport trunk pruning vlan add vlan-ids | switchport trunk pruning vlan remove vlan-ids | switchport trunk pruning vlan none | switchport trunk pruning vlan all

Syntax Description

no

Negate a command or set its defaults
switchport

Configure switchport parameters
trunk

Configure trunking parameters on an interface

pruning

Set pruning VLAN characteristics when interface is in trunking mode Not available in this release.
vlan

Enter VLANs
add

add VLANs to the current list
remove

remove VLANs from the current list
except

all VLANs except the following
none

no VLANs
all

all VLANs
vlan-ids

Type: vlan-mrange

Enter VLANs

Command Modes

  • /exec/configure/if-switching

switchto vdc

switchto vdc e-vdc2 [force] [bypass] [ __readonly__ vdc_id invalid_vdc_id noauth_vdc_id no_first ]

Syntax Description

switchto

Goto specific Virtual Device Context <vdc-name> | <vdc-id>
vdc

Manage Virtual Device Context

e-vdc2

Type: userdef

Enter Virtual Device Context <vdc-id>
__readonly__

Read Only
force

force
vdc_id

Type: uinteger

Enter Virtual Device Context <vdc-id>
invalid_vdc_id

Type: uinteger

Enter Virtual Device Context <vdc-id>
noauth_vdc_id

Type: uinteger

Enter Virtual Device Context <vdc-id>
no_first

Type: uinteger

Enter Virtual Device Context <vdc-id>
bypass

Enter Virtual Device Context <vdc-id>

Command Modes

  • /exec/

sync-snmp-password (aaa_tree)

sync-snmp-password s0 s1 s2

Syntax Description

sync-snmp-password

sync snmp password
s0

Type: string

length: 64

password
s1

Type: string

length: 64

user
s2

Type: string

length: 128

snmp client host

Command Modes

  • /exec

sync-snmp-password (aaa_tree)

[no] sync-snmp-password s0

Syntax Description

no

Negate a command or set its defaults
sync-snmp-password

sync snmp password
s0

Type: string

length: 64

password

Command Modes

  • /exec/configure

sync-snmp-password (aaa_tree)

sync-snmp-password s0

Syntax Description

sync-snmp-password

sync snmp password
s0

Type: string

length: 64

password

Command Modes

  • /exec

syslog

syslog { msg s0 | priority { i0 msg1 s1 | alerts msg2 s2 | critical msg3 s3 | debugging msg4 s4 | emergencies msg5 s5 | errors msg6 s6 | informational msg7 s7 | notifications msg8 s8 | warnings msg9 s9 } }

Syntax Description

syslog

Execute a logging command
msg

Log EEM action message
s0

Type: remainder

Enter the msg (max 300 chars)
priority

Priority of the log message
i0

Type: integer

min: 0  max: 7  

Enter priority of the log message
msg1

Log EEM action message
s1

Type: remainder

Enter the msg (max 300 chars)
alerts

Alert log message
msg2

Log EEM action message
s2

Type: remainder

Enter the msg (max 300 chars)
critical

Critical log message
msg3

Log EEM action message
s3

Type: remainder

Enter the msg (max 300 chars)
debugging

Debugging log message
msg4

Log EEM action message
s4

Type: remainder

Enter the msg (max 300 chars)
emergencies

Emergency log message
msg5

Log EEM action message
s5

Type: remainder

Enter the msg (max 300 chars)
errors

Error log message
msg6

Log EEM action message
s6

Type: remainder

Enter the msg (max 300 chars)
informational

Informational log message
msg7

Log EEM action message
s7

Type: remainder

Enter the msg (max 300 chars)
notifications

Notifications log message
msg8

Log EEM action message
s8

Type: remainder

Enter the msg (max 300 chars)
warnings

Warning log message
msg9

Log EEM action message
s9

Type: remainder

Enter the msg (max 300 chars)

Command Modes

  • /exec

system-mac

system-mac sysmac | no system-mac

Syntax Description

no

Negate a command or set its defaults
system-mac

Configure system mac address
sysmac

Type: ethernet

specify system mac address

Command Modes

  • /exec/configure/vpc-domain

system

[no] system { routing { non-hierarchical [ max-mode l3 ] | max-mode host } | non-hierarchical-routing [max-l3-mode] }

Syntax Description

no

Negate a command or set its defaults
system

System Management Commands
routing

Layer-3 routing
non-hierarchical

Disable mode of host routing on LC and LPM routing in Fabric modules
non-hierarchical-routing

Disable mode of host routing on LC and LPM routing in Fabric modules
max-mode

Maximum scale to be enabled
l3

Layer-3 longest-prefix-match (LPM) routes
max-l3-mode

Enable ALPM mode (Mode-4 in T2)
host

host routes

Command Modes

  • /exec/configure

system-priority

system-priority syspri | no system-priority syspri

Syntax Description

no

Negate a command or set its defaults
system-priority

Configure system priority
syspri

Type: integer

min: 1  max: 65535  

specify system priority

Command Modes

  • /exec/configure/vpc-domain

system aclmgr cleanup-unused-policies

system aclmgr cleanup-unused-policies

Syntax Description

system

System management commands
aclmgr

ACL commands
cleanup-unused-policies

Release ACL resources cached on shutdown ports

Command Modes

  • /exec

system auto-collect tech-support

system [no] auto-collect tech-support [ timeout time ]

Syntax Description

system

System management commands
no

Negate a command or set its defaults
auto-collect

Auto collection of information
tech-support

Collect tech-support in case of service causing supervisor reset
timeout

Collect tech-support timeout
time

Type: integer

min: 600  max: 3600  

Timeout in seconds

Command Modes

  • /exec

system cores

system cores { uri0 | uri1 vrf vrf-known-name } | no system cores [ uri0 | uri1 vrf vrf-known-name ]

Syntax Description

no

Negate a command or set its defaults
system

System management commands
cores

Copy cores to destination
uri0

Type: uri

Select file on expansion flash
uri1

Type: uri

Select destination filesystem
vrf

Enter the vrf name
vrf-known-name

Type: vrf

VRF name

Command Modes

  • /exec/configure

system cores retain

[no] system cores retain

Syntax Description

no

Negate a command or set its defaults
system

System management commands
cores

Copy cores to destination
retain

keep the cores

Command Modes

  • /exec/configure

system default interface congestion pause timeout

system default interface { congestion { timeout i0 mode { core | edge } | mode { core | edge } } | pause { timeout i1 mode1 { core | edge } | mode1 { core | edge } } } | no system default interface { congestion { timeout i0 mode { core | edge } | mode { core | edge } } | pause { timeout i1 mode1 { core | edge } | mode1 { core | edge } } }

Syntax Description

no

Negate a command or set its defaults
system

System management commands
default

Configure system default values
interface

Configure system default interface values
congestion

Configure system timeout values for congestion drop
pause

Configure system timeout values for pause frame Not available in this release.
timeout

Configure system timeout values
i0

Type: integer

min: 100  max: 1000  

Configure number of milliseconds
i1

Type: integer

min: 100  max: 500  

Configure number of milliseconds
mode

Configure mode
mode1

Configure mode
core

Enter the port type
edge

Enter the port type

Command Modes

  • /exec/configure

system default switchport

system default switchport | no system default switchport

Syntax Description

no

Negate a command or set its defaults
system

System management commands
default

Configure system default values
switchport

Configure switchport

Command Modes

  • /exec/configure

system default switchport fabricpath

system default switchport fabricpath | no system default switchport fabricpath

Syntax Description

no

Negate a command or set its defaults
system

System management commands
default

Configure system default values
switchport

Configure switchport

fabricpath

Configure default port mode as fabricpath

Command Modes

  • /exec/configure

system default switchport shutdown

system default switchport shutdown | no system default switchport shutdown

Syntax Description

no

Negate a command or set its defaults
system

System management commands
default

Configure system default values
switchport

Configure switchport

shutdown

Configure admin state

Command Modes

  • /exec/configure

system hap-reset

system hap-reset

Syntax Description

system

System management commands
hap-reset

enables resetting of local or remote sup on ha failures

Command Modes

  • /exec

system health check bootflash

system health check bootflash [fix-errors]

Syntax Description

system

System management commands
health

system health exec commands
check

run consistency check on compact flash
bootflash

check internal bootflash
fix-errors

fix bootflash errors

Command Modes

  • /exec

system heartbeat

system heartbeat

Syntax Description

system

System management commands
heartbeat

enables heartbeat

Command Modes

  • /exec

system high-multicast-priority

[no] system high-multicast-priority

Syntax Description

no

Negate a command or set its defaults
system

System Management Commands
high-multicast-priority

high priority to multicast

Command Modes

  • /exec/configure

system inband queuing (pm)

system inband queuing { clear-pm-counters | clear-klm-counters | clear-all-counters }

Syntax Description

system

System-related show commands
inband

System Inband configuration
queuing

System Inband Queueing Algorithm
clear-pm-counters

clear user space inband queue counters
clear-klm-counters

clear KLM VDC inband queue counters
clear-all-counters

clear all inband queue counters

Command Modes

  • /exec

system inband queuing (pm)

[no] system inband queuing [ [round-robin] [ bpdu weight weight-val ] [ q0 weight weight-val ] [ q1 weight weight-val ] [ q2 weight weight-val ] [ q3 weight weight-val ] [ q0 no-drop ] [ q1 no-drop ] [ q2 no-drop ] [ q3 no-drop ] [pick_packets] [ bpdu map q-index ] [ arp map q-index ] [ q0 map q-index ] [ q1 map q-index ] [ q2 map q-index ] [ q3 map q-index ] ]

Syntax Description

no

Negate a command or set its defaults
system

System-related show commands
inband

System Inband configuration
queuing

System Inband Queueing Algorithm
round-robin

Simple Round-Robin
bpdu

bpdu queue
arp

arp queue
q0

q0 queue (cos 5,6,7)
q1

q1 queue (cos 3,4)
q2

q2 queue (cos 2)
q3

q3 queue (cos 0,1)
weight

weight associated with the queue
no-drop

set no drop option on queue
weight-val

Type: uinteger

min: 0  max: 255  

weights
pick_packets

enable packet rx
map

map to queue
q-index

Type: uinteger

min: 0  max: 4  

queue index

Command Modes

  • /exec/configure

system jumbomtu

system jumbomtu mtu | no system jumbomtu [mtu]

Syntax Description

no

Negate a command or set its defaults
system

System management commands
jumbomtu

Configure system jumbomtu
mtu

Type: integer

min: 1500  max: 9216  

Enter jumbomtu

Command Modes

  • /exec/configure

system kernel-trace

system kernel-trace [ enable | disable ]

Syntax Description

system

system management commands
kernel-trace

kernel tracing
enable

enables kernel tracing
disable

disables kernel tracing

Command Modes

  • /exec

system kgdb

system kgdb

Syntax Description

system

System management commands
kgdb

enables kgdb

Command Modes

  • /exec

system memlog

system memlog

Syntax Description

system

System management commands
memlog

Generate memory log in bootflash

Command Modes

  • /exec

system memory-thresholds minor severe critical

[no] system memory-thresholds minor minor severe severe critical crit

Syntax Description

no

Negate a command or set its defaults
system

System management commands
memory-thresholds

Set memory thresholds on the card
minor

enter minor threshold

minor

Type: integer

min: 50  max: 100  

please enter minor memory threshold as % memory
severe

enter severe treshold
severe

Type: integer

min: 50  max: 100  

please enter severe memory threshold as % memory
critical

enter critical treshold
crit

Type: integer

min: 50  max: 100  

please enter critical memory threshold as % memory

Command Modes

  • /exec/configure

system minlife

system minlife i0

Syntax Description

system

System management commands
minlife

Set system minlife (in seconds)
i0

Type: integer

Set minlife

Command Modes

  • /exec

system no hap-reset

system no hap-reset

Syntax Description

system

System management commands
no

Negate a command or set its defaults
hap-reset

enables resetting of local or remote sup on ha failures

Command Modes

  • /exec

system no heartbeat

system no heartbeat

Syntax Description

system

System management commands
no

Negate a command or set its defaults
heartbeat

enables heartbeat

Command Modes

  • /exec

system no kgdb

system no kgdb

Syntax Description

system

System management commands
no

Negate a command or set its defaults
kgdb

enables kgdb

Command Modes

  • /exec

system no standby manual-boot

system no standby manual-boot

Syntax Description

system

System management commands
no

Negate a command or set its defaults
standby

System standby manual boot
manual-boot

No action taken to force-download standby sup

Command Modes

  • /exec

system no statistics

system no statistics

Syntax Description

system

System management commands
no

Negate a command or set its defaults
statistics

disable the sysmgr statistics

Command Modes

  • /exec

system no watchdog

system no watchdog

Syntax Description

system

System management commands
no

Negate a command or set its defaults
watchdog

enables watchdog

Command Modes

  • /exec

system no watchdog kgdb

system no watchdog kgdb

Syntax Description

system

System management commands
no

Negate a command or set its defaults
watchdog

enables watchdog
kgdb

enter kgdb on watchdog failure

Command Modes

  • /exec

system offline

system offline

Syntax Description

system

System management commands
offline

Go offline

Command Modes

  • /exec

system pss shrink

system pss shrink

Syntax Description

system

System management commands
pss

PSS commands
shrink

shrink pss files

Command Modes

  • /exec

system qos

system qos

Syntax Description

system

System management commands
qos

QoS parameters

Command Modes

  • /exec/configure

system release mod-lock uuid nodeid

system release mod-lock uuid uuid-hex nodeid nodeid-hex

Syntax Description

system

System management commands
release

release
mod-lock

module lock
uuid

uuid of the service holding the lock
uuid-hex

Type: hex

uuid
nodeid

node-id
nodeid-hex

Type: hex

nodeid

Command Modes

  • /exec

system restart vdc service name

system restart vdc { e-vdc2 | vdc-id } service name s0

Syntax Description

system

System management commands
restart

Restart a service
vdc

VDC number
e-vdc2

Type: userdef

Enter VDC <vdc-id>
vdc-id

Type: integer

min: 1  max: 1  

vdc number
service

Service to be restarted
name

Name of a service
s0

Type: string

Name of service

Command Modes

  • /exec/configure

system standby manual-boot

system standby manual-boot

Syntax Description

system

System management commands
standby

System standby management commands
manual-boot

No action taken to force-download standby sup

Command Modes

  • /exec

system standby reload vdc

system standby reload vdc { e-vdc2 | i0 }

Syntax Description

system

System management commands
standby

System standby management commands
reload

Reload
vdc

vdc to reload
e-vdc2

Type: userdef

Enter VDC <vdc-id>
i0

Type: integer

min: 1  max: 1  

vdc number

Command Modes

  • /exec

system startup-config init

system startup-config init

Syntax Description

system

System management commands
startup-config

System startup-config commands
init

Initialize the startup-configuration

Command Modes

  • /exec

system startup-config kill config-update

system startup-config kill config-update

Syntax Description

system

System management commands
startup-config

System startup-config commands
kill

Kill configuration update
config-update

Kill configuration update

Command Modes

  • /exec

system startup-config unlock

system startup-config unlock i0

Syntax Description

system

System management commands
startup-config

System startup-config commands
unlock

Unlock startup-config
i0

Type: uinteger

min: 0  max: 4294967295  

Startup-config lock id

Command Modes

  • /exec

system statistics

system statistics

Syntax Description

system

System management commands
statistics

enables sysmgr statistics

Command Modes

  • /exec

system switchover

system switchover

Syntax Description

system

System management commands
switchover

Switch over to the standby supervisor

Command Modes

  • /exec

system switchover force

system switchover force

Syntax Description

system

System management commands
switchover

Switch over to the standby supervisor
force

Force switch over to the standby supervisor

Command Modes

  • /exec

system swover-timeout-reset

[no] system swover-timeout-reset

Syntax Description

no

Negate a command or set its defaults
system

System management commands
swover-timeout-reset

switchover timeout and reset

Command Modes

  • /exec

system trace

system trace i0 | no system trace [i0]

Syntax Description

no

Negate a command or set its defaults
system

System management commands
trace

To configure system trace level
i0

Type: hex

Select the mask

Command Modes

  • /exec/configure

system vlan long-name

[no] system vlan long-name

Syntax Description

no

Negate a command or set its defaults
system

System management commands
vlan

Vlan commands

long-name

Configure 128 character VLAN names

Command Modes

  • /exec/configure

system vlan reserve

system vlan start-val reserve | no system vlan start-val reserve

Syntax Description

system

system wide configuration
no

Select default reserved vlans group vlan 3968-4094
vlan

Vlan commands Not available in this release.
start-val

Type: integer

min: 2  max: 3968  

minimum VLANs value
reserve

reservation Not available in this release.

Command Modes

  • /exec/configure

system watchdog

system watchdog

Syntax Description

system

System management commands
watchdog

enables watchdog

Command Modes

  • /exec

system watchdog kgdb

system watchdog kgdb

Syntax Description

system

System management commands
watchdog

enables watchdog
kgdb

enter kgdb on watchdog failure

Command Modes

  • /exec