The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
[no] key keyid
| no |
Negate a command or set its defaults |
| key |
Configure a key |
| keyid |
Type: integer min: 0 max: 65535 Key identifier |
key-string [0] keystring | no key-string
| no |
Negate a command or set its defaults |
| key-string |
Set key string |
| 0 |
Encryption Type - No Encryption(default) |
| keystring |
Type: remainder key string |
key-string 7 keystring
| key-string |
Set key string |
| 7 |
Encryption Type - Proprietary |
| keystring |
Type: remainder key string |
[no] key chain keychain
| no |
Negate a command or set its defaults |
| key |
Key Management |
| chain |
Keychain Management |
| keychain |
Type: string pattern: [!-~]* antipattern: mode | decrypt length: 63 key-chain name |
[no] key config-key { hex | ascii } [master-key]
| no |
Negate a command or set its defaults |
| key |
Encryption key for strong encryption |
| config-key |
Master-key for strong encryption of secrets in config |
| hex |
Key followed should be in hex format |
| ascii |
Key followed should be in ascii format |
| master-key |
Type: string Enter the Master-key |
[no] [eigrp] kill-everyone
| no |
Negate a command or set its defaults |
| eigrp |
EIGRP router configuration commands |
| kill-everyone |
Kill all adjacencies on SIA |
kill background pid
| kill |
terminate processes |
| background |
kill background processes (started with 'source background <file>' command) |
| pid |
Type: string background script to terminate, by process-id or just a regex matching any line from 'show background' command |
Feedback