Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 6.1(2)I2(2)

radius-server deadtime

[no] radius-server deadtime i0

Syntax Description


no	Negate a command or set its defaults
radius-server	Configure RADIUS related parameters
deadtime	duration for which non-reachable server is skipped
`i0`	Type: integer min: 0 max: 1440 Length of time, in minutes

Command Modes

/exec/configure

radius-server directed-request

[no] radius-server directed-request

Syntax Description


no	Negate a command or set its defaults
radius-server	Configure RADIUS related parameters
directed-request	enable direct authentication requests to server

Command Modes

/exec/configure

radius-server host

[no] radius-server host hostipname { key { 0 s0 | 6 s6 | 7 s1 | s2 } [pac] [ auth-port i0 [ acct-port i1 ] ] | [ auth-port1 i2 ] [ acct-port1 i3 ] } [ authentication [ accounting [ timeout i4 ] [ retransmit i5 ] ] | [accounting1] [ timeout1 i6 ] [ retransmit1 i7 ] ] | no radius-server host hostipname key

Syntax Description


no	Negate a command or set its defaults
radius-server	Configure RADIUS related parameters
host	RADIUS server's DNS name or its IP address
`hostipname`	Type: nameorip IPV4/IPV6 address or DNS name
key	RADIUS shared secret
pac	Secure Radius Enable
0	RADIUS shared secret(clear text)
`s0`	Type: string length: 63 RADIUS shared secret(clear text)
accounting	Use for accounting
retransmit	RADIUS server retransmit count
`i5`	Type: integer min: 0 max: 5 RADIUS server retransmit count
timeout	RADIUS server timeout period in seconds
`i4`	Type: integer min: 1 max: 60 RADIUS server timeout period in seconds
retransmit1	RADIUS server retransmit count
`i7`	Type: integer min: 0 max: 5 RADIUS server retransmit count
auth-port	RADIUS server's port for authentication
`i0`	Type: integer min: 0 max: 65535 port number
timeout1	RADIUS server timeout period in seconds
`i6`	Type: integer min: 1 max: 60 RADIUS server timeout period in seconds
acct-port	RADIUS server's port for accounting
`i1`	Type: integer min: 0 max: 65535 port number
accounting1	Use for accounting
authentication	Use for authentication
6	Radius shared secret(type-6 encrypted)
`s6`	Type: string length: 124 Tadius shared secret(encrypted)
7	RADIUS shared secret(encrypted)
`s1`	Type: string length: 63 RADIUS shared secret(encrypted)
auth-port1	RADIUS server's port for authentication
`i2`	Type: integer min: 0 max: 65535 port number
`s2`	Type: string length: 63 RADIUS shared secret(clear text)
acct-port1	RADIUS server's port for accounting
`i3`	Type: integer min: 0 max: 65535 port number

Command Modes

/exec/configure

radius-server key 0

[no] radius-server key { 0 s0 | 6 s6 | 7 s1 | s2 } | no radius-server key

Syntax Description


no	Negate a command or set its defaults
radius-server	Configure RADIUS related parameters
key	Global RADIUS server shared secret
0	default RADIUS shared secret(clear text)
`s0`	Type: string length: 63 default RADIUS shared secret(clear text)
6	default RADIUS shared secret(type-6 encrypted)
`s6`	Type: string length: 124 default RADIUS shared secret(type-6 encrypted)
7	default RADIUS shared secret(encrypted)
`s1`	Type: string length: 63 default RADIUS shared secret(encrypted)
`s2`	Type: string length: 63 default RADIUS shared secret(clear text)

Command Modes

/exec/configure

radius-server pss-clean

[no] radius-server pss-clean

Syntax Description


no	Negate a command or set its defaults
radius-server	Configure RADIUS related parameters
pss-clean	Erase PSS

Command Modes

/exec/configure

radius-server retransmit

[no] radius-server retransmit i0

Syntax Description


no	Negate a command or set its defaults
radius-server	Configure RADIUS related parameters
retransmit	Global RADIUS server retransmit count
`i0`	Type: integer min: 0 max: 5 Global RADIUS server retransmit count

Command Modes

/exec/configure

radius-server timeout

[no] radius-server timeout i0

Syntax Description


no	Negate a command or set its defaults
radius-server	Configure RADIUS related parameters
timeout	Global RADIUS server timeout period in seconds
`i0`	Type: integer min: 1 max: 60 RADIUS server timeout period in seconds

Command Modes

/exec/configure

random-detect (qosmgr)

[no] random-detect cos cos-list [minimum-threshold] { min-thresh [ packets | bytes | kbytes | mbytes | ms | us ] | percent min-percent-of-qsize } [maximum-threshold] { max-thresh [ packets1 | bytes1 | kbytes1 | mbytes1 | ms1 | us1 ] | percent1 max-percent-of-qsize }

Syntax Description


no	Negate a command or set its defaults
random-detect	Configure WRED parameters
cos	Parameters for each cos value Not available in this release.
`cos-list`	Type: integer-mrange List of class-of-service values
minimum-threshold	Specify minimum threshold for WRED
`min-thresh`	Type: long Minimum threshold value
maximum-threshold	Specify maximum threshold for WRED
`max-thresh`	Type: long Maximum threshold value
percent	Specify thresholds in percent
percent1	Specify thresholds in percent
`min-percent-of-qsize`	Type: uinteger min: 1 max: 100 Minimum threshold percent of queue size
`max-percent-of-qsize`	Type: uinteger min: 1 max: 100 Maximum threshold percent of queue size
packets	Packets
bytes	Bytes
kbytes	Kilo bytes
mbytes	Mega bytes
ms	Milli second(s)
us	Micro second(s)
packets1	Packets
bytes1	Bytes
kbytes1	Kilo Bytes
mbytes1	Mega Bytes
ms1	Milli second(s)
us1	Micro second(s)

Command Modes

/exec/configure/policy-map/type/queuing/class

random-detect (qosmgr)

[no] random-detect [ minimum-threshold min-thresh { packets | bytes | kbytes | mbytes } maximum-threshold max-thresh { packets1 | bytes1 | kbytes1 | mbytes1 } drop-probability drop-prob weight weight [cap-average] | threshold { burst-optimized | mesh-optimized } ] [ecn]

Syntax Description


no	Negate a command or set its defaults
random-detect	Configure WRED parameters
threshold	Threshold
burst-optimized	Threshold optimized for bursty traffic
mesh-optimized	Threshold optimized for mesh traffic
minimum-threshold	Specify minimum threshold for WRED
`min-thresh`	Type: long Minimum threshold value
maximum-threshold	Specify maximum threshold for WRED
`max-thresh`	Type: long Maximum threshold value
packets	Packets
bytes	Bytes
kbytes	Kilo bytes
mbytes	Mega bytes
packets1	Packets
bytes1	Bytes
kbytes1	Kilo Bytes
mbytes1	Mega Bytes
drop-probability	Drop Probability at Maximum Threshold
`drop-prob`	Type: integer min: 0 max: 100 Drop Probability Value
weight	Queue length weight
`weight`	Type: integer min: 0 max: 15 Queue length weight
cap-average	If average queue length is more, replace average queue length with current queue length
ecn	ECN

Command Modes

/exec/configure/policy-map/type/queuing/class

random-detect cos-based

[no] random-detect cos-based [ aggregate [minimum-threshold] { min-thresh [ packets | bytes | kbytes | mbytes | ms | us ] | percent min-percent-of-qsize } [maximum-threshold] { max-thresh [ packets1 | bytes1 | kbytes1 | mbytes1 | ms1 | us1 ] | percent1 max-percent-of-qsize } ]

Syntax Description


no	Negate a command or set its defaults
random-detect	Configure WRED parameters
cos-based	Configure WRED parameters for cos-based mode Not available in this release.
aggregate	Configure WRED parameters to same value for all sub-classes
minimum-threshold	Specify minimum threshold for WRED
`min-thresh`	Type: long Minimum threshold value
maximum-threshold	Specify maximum threshold for WRED
`max-thresh`	Type: long Maximum threshold value
percent	Specify thresholds in percent
percent1	Specify thresholds in percent
`min-percent-of-qsize`	Type: uinteger min: 1 max: 100 Minimum threshold percent of queue size
`max-percent-of-qsize`	Type: uinteger min: 1 max: 100 Maximum threshold percent of queue size
packets	Packets
bytes	Bytes
kbytes	Kilo bytes
mbytes	Mega bytes
ms	Milli second(s)
us	Micro second(s)
packets1	Packets
bytes1	Bytes
kbytes1	Kilo Bytes
mbytes1	Mega Bytes
ms1	Milli second(s)
us1	Micro second(s)

Command Modes

/exec/configure/policy-map/type/queuing/class

rate-limit

rate-limit { auto | rate_value } | no rate-limit

Syntax Description


no	Negate a command or set its defaults
rate-limit	Set the Rate limit for SPAN packets Not available in this release.
auto	Set the Rate limit using auto value Not available in this release.
`rate_value`	Type: integer min: 1 max: 100 Enter the percentage of the maximum rate for SPAN packets

Command Modes

/exec/configure/monitor-local-src
/exec/configure/config-monitor
/exec/configure/config-monitor-erspan-src

rate-limit cpu direction pps action log (pm)

[no] rate-limit cpu direction { input | output | both } pps pps-val action log

Syntax Description


no	Negate a command or set its defaults
rate-limit	set packet per second rate limit
cpu	Supervisor CPU limits
direction	input/output direction
input	set max input packet rate
output	set max output packet rate
both	set max input and output packet rate
pps	packet per second
`pps-val`	Type: uinteger min: 0 max: 100000 pps value
action	log action
log	write a syslog message if PPS hits rate-limit

Command Modes

/exec/configure/if-eth-base
/exec/configure/if-eth-any
/exec/configure/if-mgmt-ether

rate-limit cpu direction pps action log (pm)

[no] rate-limit cpu direction { input | output | both } pps pps-val action log

Syntax Description


no	Negate a command or set its defaults
rate-limit	set packet per second rate limit
cpu	Supervisor CPU limits
direction	input/output direction
input	set max input packet rate
output	set max output packet rate
both	set max input and output packet rate
pps	packet per second
`pps-val`	Type: uinteger min: 0 max: 100000 pps value
action	log action
log	write a syslog message if PPS hits rate-limit

Command Modes

/exec/configure

rate-limiter

{ platform | hardware } rate-limiter { layer-3 { l3-opts | multicast mcast-opts } | layer-2 l2-opts | opts | f1 f1-opts } { pps [ burst burst ] | disable } [ module module [ port start end ] ] | no { platform | hardware } rate-limiter { layer-3 { l3-opts | multicast mcast-opts } | layer-2 l2-opts | opts | f1 f1-opts } [disable] [pps] [ burst burst ] [ module module [ port start end ] ]

Syntax Description


no	Negate a command or set its defaults
platform	Platform configuration commands
hardware	Hardware Internal Information
rate-limiter	Configure Rate-Limiter for packets forwarded to supervisor
layer-3	Layer-3 control and Routed packets
`l3-opts`	glean value: 3 Glean traffic
multicast	Multicast data packets
`mcast-opts`	local-groups value: 5 Data packets punted for initiating SPT join
layer-2	Layer-2 control and Bridged packets Not available in this release.
`l2-opts`	storm-control value: 7 Packets flooded in VLAN port-security value: 12 Packets violating MAC restrictions on the ingress interface mcast-snooping value: 13 IGMP Snoop packets for L2 Multicast vpc-low value: 14 Control packets over vPC low q l2pt value: 15 Layer2 tunnel protocol vpc-peer-gw value: 21 Traffic to be redirected to vPC peer lisp-map-cache value: 22 Traffic to be redirected to LISP peer
`opts`	access-list-log value: 8 Packets copied to supervisor for access-list logging bfd value: 23 BFD protocol traffic exception value: 24 Catch-all exception traffic
`pps`	Type: integer min: 0 max: 10000 value in packets per sec
f1	Control packets from F1 modules to supervisor Not available in this release.
`f1-opts`	rl-1 value: 16 STP and Fabricpath-ISIS rl-2 value: 17 L3-ISIS and OTV-ISIS rl-3 value: 18 UDLD, LACP, CDP and LLDP rl-4 value: 19 Q-in-Q and ARP request rl-5 value: 20 IGMP, NTP, DHCP-Snoop, Port-Security and Mgmt traffic
disable	Disable the rate-limiter Not available in this release.
module	Specify a module number
`module`	Type: integer Specify a module number
port	Port range
`start`	Type: integer min: 1 max: 48 Port start index
`end`	Type: integer min: 1 max: 48 Port end index
burst	Modify burst parameter
`burst`	Type: integer min: 0 max: 10000 value of burst size

Command Modes

/exec/configure

rate-mode

rate-mode ratemode [force] | no rate-mode [ratemode] [force]

Syntax Description


no	Negate a command or set its defaults
rate-mode	Enter the rate mode
force	This option will shutdown all ports in port-group momentarily
`ratemode`	Interface port speed dedicated value: 1 rate mode is dedicated shared value: 2 rate mode is shared

Command Modes

/exec/configure/if-ethernet-all
/exec/configure/if-eth-base

rd

rd { ext-comm-rd-aa2nn4 | ext-comm-rd-aa4nn2 } | no rd [ ext-comm-rd-aa2nn4 | ext-comm-rd-aa4nn2 ]

Syntax Description


no	Negate a command or set its defaults
rd	VPN Route Distinguisher Not available in this release.
`ext-comm-rd-aa4nn2`	Type: community VPN route distinguisher in aa4:nn or ip:nn format
`ext-comm-rd-aa2nn4`	Type: community VPN route distinguisher in aa:nn format

Command Modes

/exec/configure/vrf

redistribute-internal

[no] redistribute-internal

Syntax Description


no	Negate a command or set its defaults
redistribute-internal	iBGP redistribution into an IGP

Command Modes

/exec/configure/router-bgp/router-bgp-af-ipv4
/exec/configure/router-bgp/router-bgp-vrf-af-ipv4
/exec/configure/router-bgp/router-bgp-af-ipv6
/exec/configure/router-bgp/router-bgp-vrf-af-ipv6

redistribute bgp (ospf)

redistribute { bgp as | { eigrp | isis | ospf | rip } tag | static | direct | amt | lisp } route-map { policy-name | rtr_pol_name } | no redistribute { bgp as | { eigrp | isis | ospf | rip } tag | static | direct | amt | lisp } [ route-map { policy-name | rtr_pol_name } ]

Syntax Description


no	Negate a command or set its defaults
redistribute	Redistribute information from another routing protocol
bgp	Border Gateway Protocol (BGP)
`as`	Type: asn Autonomous system number
isis	ISO Intermediate-to-Intermediate (IS-IS)
ospf	Open Shortest Path First (OSPFv2)
eigrp	Enhanced Interior Gateway Protocol (EIGRP)
rip	Routing Information Protocol (RIP)
`tag`	Type: string Protocol Tag
static	Static
direct	Directly connected
amt	AMT anycast prefix
lisp	LISP EID-prefixes
route-map	Policy to constrain redistribution
`policy-name`	Type: string pattern: [!-~]* length: 63 Route-map name
`rtr_pol_name`	Type: string An existing routing-rules policy

Command Modes

/exec/configure/router-ospf
/exec/configure/router-ospf/vrf

redistribute bgp (ospfv3)

redistribute { bgp as | { eigrp | isis | ospfv3 | rip } tag | static | direct | amt | lisp } route-map { policy-name | rtr_pol_name } | no redistribute { bgp as | { eigrp | isis | ospfv3 | rip } tag | static | direct | amt | lisp } [ route-map { policy-name | rtr_pol_name } ]

Syntax Description


no	Negate a command or set its defaults
redistribute	Redistribute information from another routing protocol
bgp	Border Gateway Protocol (BGP)
`as`	Type: asn Autonomous system number
eigrp	Enhanced Interior Gateway Protocol (EIGRP)
isis	ISO Intermediate-to-Intermediate (IS-IS)
ospfv3	Open Shortest Path First (OSPFv3)
rip	Routing Information Protocol (RIP)
`tag`	Type: string Process Tag
static	Static
direct	Directly connected
amt	AMT anycast prefix
lisp	LISP EID-prefixes
route-map	Policy to constrain redistribution
`policy-name`	Type: string pattern: [!-~]* length: 63 Route-map name
`rtr_pol_name`	Type: string An existing routing-rules policy

Command Modes

/exec/configure/router-ospf3/router-ospf3-af-ipv6
/exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

redistribute maximum-prefix (isis)

redistribute maximum-prefix maximum [threshold] [ warning-only | withdraw [ retries timeout ] ] | no redistribute maximum-prefix [ maximum [threshold] [ warning-only | withdraw [ retries timeout ] ] ]

Syntax Description


no	Negate a command or set its defaults
redistribute	Redistribute information from another routing protocol
maximum-prefix	Max number of prefixes redistributed
`maximum`	Type: integer min: 1 max: 65535 max number
`threshold`	Type: integer min: 1 max: 100 default: 75 Threshold in %, at which message is generated
warning-only	Warning msg is logged when max is reached
withdraw	Withdraw all redistributed routes
`retries`	Type: integer min: 1 max: 12 default: 1 No of times to retry to get redist routes again
`timeout`	Type: integer min: 60 max: 600 default: 300 Time between the retries

Command Modes

/exec/configure/router-isis/router-isis-af-ipv6

redistribute maximum-prefix (eigrp)

redistribute maximum-prefix maximum [threshold] [ warning-only | withdraw [ retries timeout ] ] | no redistribute maximum-prefix [ maximum [threshold] [ warning-only | withdraw [ retries timeout ] ] ]

Syntax Description


no	Negate a command or set its defaults
redistribute	Redistribute information from another routing protocol
maximum-prefix	Max number of prefixes redistributed
`maximum`	Type: integer min: 1 max: 65535 max number
`threshold`	Type: integer min: 1 max: 100 default: 75 Threshold in %, at which message is generated
warning-only	Warning msg is logged when threshold is reached
withdraw	Withdraw all redistributed routes
`retries`	Type: integer min: 1 max: 12 default: 1 Number of attempts to receive redistributed routes after max is reached
`timeout`	Type: integer min: 60 max: 600 default: 300 Retry interval

Command Modes

/exec/configure/router-eigrp/router-eigrp-vrf-common
/exec/configure/router-eigrp/router-eigrp-af-common

redistribute maximum-prefix (isis)

redistribute maximum-prefix maximum [threshold] [ warning-only | withdraw [ retries timeout ] ] | no redistribute maximum-prefix [ maximum [threshold] [ warning-only | withdraw [ retries timeout ] ] ]

Syntax Description


no	Negate a command or set its defaults
redistribute	Redistribute information from another routing protocol
maximum-prefix	Max number of prefixes redistributed
`maximum`	Type: integer min: 1 max: 65535 max number
`threshold`	Type: integer min: 1 max: 100 default: 75 Threshold in %, at which message is generated
warning-only	Warning msg is logged when max is reached
withdraw	Withdraw all redistributed routes
`retries`	Type: integer min: 1 max: 12 default: 1 No of times to retry to get redist routes again
`timeout`	Type: integer min: 60 max: 600 default: 300 Time between the retries

Command Modes

/exec/configure/router-isis/router-isis-vrf-common
/exec/configure/router-isis/router-isis-af-ipv4

redistribute maximum-prefix (ospf)

redistribute maximum-prefix maximum [threshold] [ warning-only | withdraw [ retries timeout ] ] | no redistribute maximum-prefix maximum [threshold] [ warning-only | withdraw [ retries timeout ] ]

Syntax Description


no	Negate a command or set its defaults
redistribute	Redistribute information from another routing protocol
maximum-prefix	Maximum number of prefixes redistributed to protocol
`maximum`	Type: integer min: 1 max: 65535 Maximum number of IP prefixes redistributed
`threshold`	Type: integer min: 1 max: 100 default: 75 Threshold value (%) at which to generate a warning message
warning-only	Log a warning message when limit is exceeded
withdraw	Withdraw all redistributed routes
`retries`	Type: integer min: 1 max: 12 default: 1 Number of times to retry to get the redistributed routes again
`timeout`	Type: integer min: 60 max: 600 default: 300 Timeout between each retries

Command Modes

/exec/configure/router-ospf
/exec/configure/router-ospf/vrf

redistribute maximum-prefix (ospfv3)

redistribute maximum-prefix maximum [threshold] [ warning-only | withdraw [ retries timeout ] ] | no redistribute maximum-prefix

Syntax Description


no	Negate a command or set its defaults
redistribute	Redistribute information from another routing protocol
maximum-prefix	Maximum number of prefixes redistributed to protocol
`maximum`	Type: integer min: 1 max: 65535 Maximum number of IP prefixes redistributed
`threshold`	Type: integer min: 1 max: 100 default: 75 Threshold value (%) at which to generate a warning message
warning-only	Log a warning message when limit is exceeded
withdraw	Withdraw all redistributed routes
`retries`	Type: integer min: 1 max: 12 default: 1 Number of times to retry to get the redistributed routes again
`timeout`	Type: integer min: 60 max: 600 default: 300 Timeout between each retries

Command Modes

/exec/configure/router-ospf3/router-ospf3-af-ipv6
/exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

redistribute route-map (bgp)

[no] redistribute { { eigrp | isis | ospfv3 | rip } tag | static | direct | amt | lisp } route-map rmap-name

Syntax Description


no	Negate a command or set its defaults
redistribute	Configure redistribution
isis	ISO IS-IS
ospfv3	Open Shortest Path First, version 3 (OSPFv3)
rip	Routing Information Protocol (RIP)
eigrp	Enhanced Interior Gateway Protocol
static	Static routes
direct	Directly connected
amt	AMT anycast prefix
lisp	LISP EID-prefixes in the non-default VRF
route-map	Route-map applied to redistributed routes
`rmap-name`	Type: string pattern: [!-~]* length: 63 Route-map name
`tag`	Type: string Source protocol tag

Command Modes

/exec/configure/router-bgp/router-bgp-af-ipv6
/exec/configure/router-bgp/router-bgp-vrf-af-ipv6

redistribute route-map (eigrp)

[no] redistribute { bgp as | { eigrp | isis | ospfv3 | rip } tag | static | direct | amt | lisp } route-map { map-name | rtr_pol_name }

Syntax Description


no	Negate a command or set its defaults
redistribute	Redistribute information from another routing protocol
bgp	Border Gateway Protocol (BGP)
`as`	Type: asn Autonomous system number
isis	IS-IS Routing for IPv4
ospfv3	Open Shortest Path First (OSPF) V3
rip	Routing Information Protocol (RIP)
eigrp	Enhanced Interior Gateway Routing Protocol (EIGRP)
`tag`	Type: string Process tag
static	Static routes
direct	Directly connected
amt	AMT Anycast prefix
lisp	LISP EID-prefixes
route-map	Route-map to constrain redistribution
`map-name`	Type: string pattern: [!-~]* length: 63 Route-map name
`rtr_pol_name`	Type: string An existing routing-rules policy

Command Modes

/exec/configure/router-eigrp/router-eigrp-af-ipv6

redistribute route-map (isis)

[no] redistribute { bgp as | { eigrp | isis | ospfv3 | rip } tag | static | direct | amt | lisp } route-map { map-name | rtr_pol_name }

Syntax Description


no	Negate a command or set its defaults
redistribute	Redistribute information from another routing protocol
bgp	Border Gateway Protocol (BGP)
`as`	Type: asn Autonomous system number
isis	IS-IS Routing for IPv6
ospfv3	Open Shortest Path First (OSPF) V3
eigrp	Enhanced Interior Gateway Protocol
`tag`	Type: string Process tag
static	Static routes
direct	Directly connected
amt	AMT anycast prefix
lisp	LISP EID-prefixes
route-map	Route-map to constrain redistribution
`map-name`	Type: string length: 63 A 'routing-rules' route-map name
`rtr_pol_name`	Type: string An existing routing-rules policy

Command Modes

/exec/configure/router-isis/router-isis-af-ipv6

redistribute route-map (rip)

[no] redistribute { bgp as | { eigrp | isis | ospf | rip } tag | static | direct | amt | lisp } route-map map-name

Syntax Description


no	Negate a command or set its defaults
redistribute	RIP redistribute routes from other routing protocol
bgp	Border Gateway Protocol (BGP)
eigrp	Enhanced Interior Gateway Routing Protocol (EIGRP)
`as`	Type: asn Autonomous system number
isis	Intermediate-to-intermediate (ISIS)
rip	Routing Information Protocol (RIP)
ospf	Open Shortest Path First (OSPFv2)
`tag`	Type: string Process tag
static	Static routes
direct	Directly connected routes
amt	AMT anycast prefix
lisp	LISP EID-prefixes
route-map	Policy to constrain redistribution
`map-name`	Type: string pattern: [!-~]* length: 63 Route-map name

Command Modes

/exec/configure/router-rip/router-rip-af-ipv4
/exec/configure/router-rip/router-rip-vrf-af-ipv4

redistribute route-map (bgp)

[no] redistribute { { eigrp | isis | ospf | rip } tag | static | direct | amt | lisp } route-map rmap-name

Syntax Description


no	Negate a command or set its defaults
redistribute	Configure redistribution
isis	ISO IS-IS
ospf	Open Shortest Path First (OSPF)
rip	Routing Information Protocol (RIP)
eigrp	Enhanced Interior Gateway Protocol
static	Static routes
direct	Directly connected
amt	AMT anycast prefix
lisp	LISP EID-prefixes
route-map	Route-map applied to redistributed routes
`rmap-name`	Type: string pattern: [!-~]* length: 63 Route-map name
`tag`	Type: string Source protocol tag

Command Modes

/exec/configure/router-bgp/router-bgp-af-ipv4
/exec/configure/router-bgp/router-bgp-vrf-af-ipv4

redistribute route-map (eigrp)

[no] redistribute { bgp as | { eigrp | isis | ospf | rip } tag | static | direct | amt | lisp } route-map { map-name | rtr_pol_name }

Syntax Description


no	Negate a command or set its defaults
redistribute	Redistribute information from another routing protocol
bgp	Border Gateway Protocol (BGP)
`as`	Type: asn Autonomous system number
isis	IS-IS Routing for IPv4
ospf	Open Shortest Path First (OSPF)
rip	Routing Information Protocol (RIP)
eigrp	Enhanced Interior Gateway Routing Protocol (EIGRP)
`tag`	Type: string Process tag
static	Static routes
direct	Directly connected
lisp	LISP EID-prefixes
amt	AMT Anycast prefix
route-map	Route-map to constrain redistribution
`map-name`	Type: string pattern: [!-~]* length: 63 Route-map name
`rtr_pol_name`	Type: string An existing routing-rules policy

Command Modes

/exec/configure/router-eigrp/router-eigrp-vrf-common
/exec/configure/router-eigrp/router-eigrp-af-ipv4

redistribute route-map (isis)

[no] redistribute { bgp as | { eigrp | isis | ospf | rip } tag | static | direct | amt | lisp } route-map { map-name | rtr_pol_name }

Syntax Description


no	Negate a command or set its defaults
redistribute	Redistribute information from another routing protocol
bgp	Border Gateway Protocol (BGP)
`as`	Type: asn Autonomous system number
isis	IS-IS Routing for IPv4
ospf	Open Shortest Path First (OSPF)
eigrp	Enhanced Interior Gateway Protocol
rip	RIP for IPv4
`tag`	Type: string Process tag
static	Static routes
direct	Directly connected
amt	AMT anycast prefix
lisp	LISP EID-prefixes
route-map	Route-map to constrain redistribution
`map-name`	Type: string length: 63 A 'routing-rules' route-map name
`rtr_pol_name`	Type: string An existing routing-rules policy

Command Modes

/exec/configure/router-isis/router-isis-vrf-common
/exec/configure/router-isis/router-isis-af-ipv4

redistribute route-map (rip)

[no] redistribute { bgp as | { eigrp | isis | ospfv3 | rip } tag | static | direct | amt | lisp } route-map map-name

Syntax Description


no	Negate a command or set its defaults
redistribute	RIP redistribute routes from other routing protocol
bgp	Border Gateway Protocol (BGP)
`as`	Type: asn Autonomous system number
eigrp	Enhanced Interior Gateway Routing Protocol (EIGRP)
isis	Intermediate-to-intermediate (ISIS)
rip	Routing Information Protocol (RIP)
ospfv3	Open Shortest Path First (OSPFv3)
`tag`	Type: string Process tag
static	Static routes
direct	Directly connected routes
amt	AMT anycast prefix
lisp	LISP EID-prefixes
route-map	Policy to constrain redistribution
`map-name`	Type: string pattern: [!-~]* length: 63 Route-map name

Command Modes

/exec/configure/router-rip/router-rip-af-ipv6
/exec/configure/router-rip/router-rip-vrf-af-ipv6

reference-bandwidth

[no] reference-bandwidth { ref-bw-mbps [Mbps] | ref-bw-gbps Gbps }

Syntax Description


no	Negate a command or set its defaults
reference-bandwidth	Change reference bandwidth used for setting interface metric
`ref-bw-mbps`	Type: uinteger min: 1 max: 4000000 default: 40000 Bandwidth in Mbps (Default)
Mbps	Specify in Mbps
`ref-bw-gbps`	Type: uinteger min: 1 max: 4000 default: 40 Bandwidth in Gbps
Gbps	Specify in Gbps

Command Modes

/exec/configure/router-isis/router-isis-vrf-common

reload

Syntax Description


reload	reboot the entire box

Command Modes

/exec

reload fex

reload fex { all | i }

Syntax Description


reload	reboot the entire box
fex	Reload Fex
all	Reload all Fex Modules
`i`	Type: integer min: 100 max: 199 Enter FEX identifier

Command Modes

/exec

reload force

Syntax Description


reload	reboot the entire box
force	reload without prompting

Command Modes

/exec

reload kexec

reload kexec s0 s1

Syntax Description


reload	reboot the entire box
kexec	reboot using kexec
`s0`	Type: string please enter the boot image name
`s1`	Type: string please enter the isan image name

Command Modes

/exec

reload module

reload module module

Syntax Description


reload	reboot the entire box
module	reboot a specific module Available only in the 9500 series.
`module`	Type: integer please enter the module number

Command Modes

/exec

reload module force-dnld

reload module module force-dnld

Syntax Description


reload	reboot the entire box
module	reboot a specific module Available only in the 9500 series.
`module`	Type: integer please enter the module number
force-dnld	reboot a specific module to force NetBoot and image download

Command Modes

/exec

reload module hard

reload module module hard

Syntax Description


reload	reboot the entire box
module	reboot a specific module Available only in the 9500 series.
`module`	Type: integer please enter the module number
hard	hard reboot a specific module

Command Modes

/exec

reload restore

reload restore [ delay time-out ] | no reload restore

Syntax Description


no	Negate a command or set its defaults
reload	Settings for vpc action on reload with vpc configs
restore	restore vpcs assuming peer is not functional
delay	Duration to wait before assuming peer dead and restoring vpcs
`time-out`	Type: integer min: 240 max: 3600 Time-out for restoring vPC links (in seconds)

Command Modes

/exec/configure/vpc-domain

reload vdc (vdc_mgr)

reload vdc

Syntax Description


vdc	Restart the current vdc
reload	Power cycle

Command Modes

/exec

reload vdc (vdc_mgr)

reload vdc d-vdc

Syntax Description


vdc	Restart the current vdc
reload	Power cycle
`d-vdc`	Type: userdef Enter Virtual Device Context <vdc-id>

Command Modes

/exec

remark

{ [seqno] | no } remark comment

Syntax Description


no	Negate a command or set its defaults
`seqno`	Type: uinteger min: 1 max: 4294967295 Sequence number
remark	Access list entry comment
`comment`	Type: remainder Comment, up to 100 characters

Command Modes

/exec/configure/ipacl
/exec/configure/ipv6acl
/exec/configure/macacl
/exec/configure/arpacl
/exec/configure/timerange

remote-span

[no] remote-span

Syntax Description


no	Negate a command or set its defaults
remote-span	Enable remote span VLAN

Command Modes

/exec/configure/vlan

remove-private-as

[ no | default ] remove-private-as [ all | replace-as ]

Syntax Description


no	Negate a command or set its defaults
default	Inherit values from a peer template
remove-private-as	Remove private AS number from outbound updates
all	All
replace-as	Replace

Command Modes

/exec/configure/router-bgp/router-bgp-neighbor-sess

remove-routes vni

remove-routes vni vni-id

Syntax Description


remove-routes	NVE Peer
vni	Virtual Network Identifier
`vni-id`	Type: integer VNI

Command Modes

/exec/configure/if-nve

replication mode unicast

replication mode unicast | no replication mode unicast

Syntax Description


no	Negate a command or set its defaults
replication	Replication
mode	Replication mode
unicast	Unicast mode

Command Modes

/exec/configure/if-nve

resequence

resequence { ip_ipv6_mac_arp access-list | time-range } name number increment

Syntax Description


resequence	Resequence a list with sequence numbers
`ip_ipv6_mac_arp`	IP/IPv6/MAC/ARP ip value: 9 Display IP information ipv6 value: 10 Display IPv6 information mac value: 11 MAC configuration commands arp value: 12 ARP access-list configuration commands
access-list	Resequence an access list
time-range	Resequence a time-range
`name`	Type: string length: 64 List name
`number`	Type: uinteger min: 1 max: 4294967295 Starting sequence number
`increment`	Type: uinteger min: 1 max: 4294967295 Step to increment the sequence number

Command Modes

/exec/configure

restart bgp

restart bgp as

Syntax Description


restart	Manually restart a component
bgp	Border Gateway Protocol (BGP)

Command Modes

/exec

restart eigrp

restart eigrp eigrp-ptag

Syntax Description


restart	Manually restart a component
eigrp	Enhanced Interior Gateway Routing Protocol (EIGRP)
`eigrp-ptag`	Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting \| all \| fsm \| graceful-restart \| interface \| interfaces \| internal \| neighbor \| neighbors \| notifications \| packets \| prefix \| route \| route-map \| shutdown \| summary \| topology \| traffic \| transmit \| urib \| vrf \| vrf-events length: 20 Process tag

Command Modes

/exec

restart igmp

Syntax Description


restart	Manually restart a component
igmp	Restart the IGMP multicast routing protocol

Command Modes

/exec

restart isis

restart isis tag

Syntax Description


restart	Manually restart a component
isis	Intermediate System to Intermediate System (IS-IS)
`tag`	Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Routing process tag

Command Modes

/exec

restart l3vm

Syntax Description


restart	Manually restart a component
l3vm	Display VRF information

Command Modes

/exec

restart msdp

Syntax Description


restart	Manually restart a component
msdp	Restart the MSDP multicast routing protocol

Command Modes

/exec

restart nve

Syntax Description


restart	Restart
nve	NVE Manager

Command Modes

/exec

restart oim

Syntax Description


restart	Manually restart a component
oim	oim

Command Modes

/exec/configure

restart orib

Syntax Description


restart	Manually restart a component
orib	OTV RIB (ORIB)

Command Modes

/exec

restart ospf

restart ospf tag

Syntax Description


restart	Manually restart a component
ospf	Open Shortest Path First (OSPF)
`tag`	Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency \| all \| border-routers \| database \| database-timers \| events \| flooding \| graceful-restart \| hello \| interface \| internal \| lsa-content-changed-list \| lsa-generation \| memory \| mpls \| neighbor \| neighbors \| packets \| policy \| redist \| request-list \| retransmission \| retransmission-list \| route \| spf \| spf-trigger \| statistics \| summary-address \| traffic \| virtual-links \| vrf length: 20 Process tag

Command Modes

/exec

restart ospfv3

restart ospfv3 tag

Syntax Description


restart	Manually restart a component
ospfv3	Open Shortest Path First (OSPF) (Version 3)
`tag`	Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency \| all \| border-routers \| database \| database-timers \| events \| flooding \| graceful-restart \| hello \| interface \| internal \| lsa-content-changed-list \| lsa-generation \| memory \| mpls \| neighbor \| neighbors \| packets \| policy \| redist \| request-list \| retransmission \| retransmission-list \| route \| spf \| spf-trigger \| statistics \| summary-address \| traffic \| virtual-links \| vrf length: 20 Process tag

Command Modes

/exec

restart pim

Syntax Description


restart	Manually restart a component
pim	Restart the PIM multicast routing protocol

Command Modes

/exec

restart pim6

Syntax Description


restart	Manually restart a component
pim6	Restart the PIM6 multicast routing protocol

Command Modes

/exec

restart rip

restart rip tag

Syntax Description


restart	Manually restart a component
rip	Routing Information Protocol (RIP)
`tag`	Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Process ID

Command Modes

/exec

restart rpm

Syntax Description


restart	Manually restart a component
rpm	Route Policy Manager (RPM)

Command Modes

/exec

retain route-target

[no] retain route-target { all | route-map rmap-name }

Syntax Description


no	Negate a command or set its defaults
retain	Retain the routes based on Target VPN Extended Communities
route-target	Specify Target VPN Extended Communities
all	All the routes regardless of Target-VPN community
route-map	Apply route-map to filter routes
`rmap-name`	Type: string pattern: [!-~]* length: 63 Route-map name

Command Modes

/exec/configure/router-bgp/router-bgp-af-vpnv4
/exec/configure/router-bgp/router-bgp-af-vpnv6
/exec/configure/router-bgp/router-bgp-af-l2vpn-vpls

retransmit-interval (ospf)

retransmit-interval interval | no retransmit-interval [interval]

Syntax Description


no	Negate a command or set its defaults
retransmit-interval	Packet retransmission interval
`interval`	Type: integer min: 1 max: 65535 default: 5 (seconds)

Command Modes

/exec/configure/router-ospf/vrf/router-ospf-slink

retransmit-interval (ospf)

retransmit-interval interval | no retransmit-interval [interval]

Syntax Description


no	Negate a command or set its defaults
retransmit-interval	Packet retransmission interval
`interval`	Type: integer min: 1 max: 65535 default: 5 (seconds)

Command Modes

/exec/configure/router-ospf/router-ospf-vlink
/exec/configure/router-ospf/vrf/router-ospf-vlink

retransmit-interval (ospfv3)

retransmit-interval interval | no retransmit-interval [interval]

Syntax Description


no	Negate a command or set its defaults
retransmit-interval	Packet retransmission interval
`interval`	Type: integer min: 1 max: 65535 default: 5 (seconds)

Command Modes

/exec/configure/router-ospf3/router-ospf3-vlink
/exec/configure/router-ospf3/vrf/router-ospf3-vlink

revision

revision rev-id | no revision [rev-id]

Syntax Description


no	Negate a command or set its defaults
revision	Set configuration revision number
`rev-id`	Type: uinteger min: 0 max: 65535 Configuration revision number

Command Modes

/exec/configure/spanning-tree/mst/configuration

revocation-check

[no] revocation-check { crl [none] | none }

Syntax Description


no	Negate a command or set its defaults
revocation-check	Configure trustpoint revocation check methods
crl	Configure revocation check using crl
none	Configure revocation check using none
none	Configure revocation check using none

Command Modes

/exec/configure/trustpoint

rfc1583compatibility

[no] rfc1583compatibility

Syntax Description


no	Negate a command or set its defaults
rfc1583compatibility	Configure 1583 compatibility for external path preferences

Command Modes

/exec/configure/router-ospf
/exec/configure/router-ospf/vrf

rip

{ ip } rip { metric-offset | offset-list } metric | no { ip } rip { metric-offset | offset-list } [metric]

Syntax Description


no	Negate a command or set its defaults
ip	Configure IP features
rip	RIP configuration commands
metric-offset	RIP metric for interface
offset-list	RIP metric for interface
`metric`	Type: integer min: 1 max: 15 default: 1 RIP metric value

Command Modes

/exec/configure/if-igp

rip passive-interface

[no] { ip } rip passive-interface

Syntax Description


no	Negate a command or set its defaults
ip	Configure IP features
rip	RIP configuration commands
passive-interface	RIP passive interface

Command Modes

/exec/configure/if-igp

rip poison-reverse

[no] { ip } rip poison-reverse

Syntax Description


no	Negate a command or set its defaults
ip	Configure IP features
rip	RIP configuration commands
poison-reverse	RIP poison reverse (default split-horizon)

Command Modes

/exec/configure/if-igp

rip route-filter

[no] { ip } rip route-filter { route-map map | prefix-list list } { in | out }

Syntax Description


no	Negate a command or set its defaults
ip	Configure IP features
rip	RIP configuration commands
route-filter	RIP route filtering
route-map	route-map policy to constrain route filtering
prefix-list	prefix-list policy to constrain route filtering
`map`	Type: string pattern: [!-~]* length: 63 Route-map name
`list`	Type: string length: 100 prefix-list name
in	inbound
out	outbound

Command Modes

/exec/configure/if-igp

rip shutdown

[no] rip shutdown

Syntax Description


no	Negate a command or set its defaults
rip	RIP configuration commands
shutdown	Shutdown RIP on this interface

Command Modes

/exec/configure/if-igp

rmdir

rmdir { uri0 | uri1 }

Syntax Description


rmdir	Delete a directory
`uri0`	Type: uri Delete a directory
`uri1`	Type: uri Delete a directory on expansion flash

Command Modes

/exec

rmon alarm rising-threshold falling-threshold

rmon alarm i0 s0 i1 { absolute | delta } rising-threshold i2 [i3] falling-threshold i4 [i5] [ owner s1 ] | no rmon alarm i0

Syntax Description


no	Negate a command or set its defaults
rmon	Remote Monitoring
alarm	Configure an RMON alarm
`i0`	Type: integer min: 1 max: 65535 Alarm number
`s0`	Type: string MIB object to monitor
`i1`	Type: uinteger min: 1 max: 700000 Sample interval
absolute	Test each sample directly
delta	Test delta between samples
rising-threshold	Configure the rising threshold
`i2`	Type: integer min: 2147483648 max: 2147483647 Rising threshold value
`i3`	Type: integer min: 0 max: 65535 Event to fire on rising threshold crossing
falling-threshold	Configure the falling threshold
`i4`	Type: integer min: 2147483648 max: 2147483647 Falling threshold value
`i5`	Type: integer min: 0 max: 65535 Event to fire on falling threshold crossing
owner	Specify an owner for the alarm
`s1`	Type: string Alarm owner

Command Modes

/exec/configure

rmon event

rmon event i0 [log] [ trap s0 ] [ description s1 ] [ owner s2 ] | no rmon event i0

Syntax Description


no	Negate a command or set its defaults
rmon	Remote Monitoring
event	Configure an RMON event
`i0`	Type: integer min: 1 max: 65535 Event number
log	Generate RMON log when the event fires
trap	Generate SNMP trap when event fires
`s0`	Type: string length: 32 SNMP community string
description	Specify a description of the event
`s1`	Type: string Event description
owner	Specify an owner for the event
`s2`	Type: string Event owner

Command Modes

/exec/configure

rmon hcalarm startupalarm rising-threshold falling-threshold owner

rmon hcalarm i0 s0 i1 { absolute | delta } startupalarm i2 rising-threshold i3 i4 falling-threshold i5 i6 owner s1 | no rmon hcalarm i0

Syntax Description


no	Negate a command or set its defaults
rmon	Remote Monitoring
hcalarm	Configure an High Capacity RMON alarm
`i0`	Type: integer min: 1 max: 65535 Alarm number
`s0`	Type: string MIB object to monitor
`i1`	Type: uinteger min: 1 max: 700000 Sample interval
absolute	Test each sample directly
delta	Test delta between samples
startupalarm	Configure alarm type
`i2`	Type: integer min: 1 max: 3 Startup alarm type, rising(1) falling(2) risingorfalling(3)
rising-threshold	Configure the rising threshold
`i3`	Type: longlong Rising threshold value in bytes
`i4`	Type: integer min: 0 max: 65535 Event to fire on rising threshold crossing
falling-threshold	Configure the falling threshold
`i5`	Type: longlong Falling threshold value in bytes
`i6`	Type: integer min: 0 max: 65535 Event to fire on falling threshold crossing
owner	Specify an owner for the alarm
`s1`	Type: string Alarm owner

Command Modes

/exec/configure

role feature-group name

[no] role feature-group name arg6

Syntax Description


no	Negate a command or set its defaults
role	Configure roles
feature-group	Configure role feature-group
name	Feature-group name
`arg6`	Type: string length: 32 Enter feature-group name

Command Modes

/exec/configure

role name

[no] role name arg2

Syntax Description


no	Negate a command or set its defaults
role	Configure roles
name	Enter the role name
`arg2`	Type: userdef Enter the role name

Command Modes

/exec/configure

role priority

role priority priority_value | no role priority

Syntax Description


no	Negate a command or set its defaults
role	Role related configuration
priority	Configure priority to be used during vPC role (primary/secondary) election
`priority_value`	Type: integer min: 1 max: 65535 specify priority value

Command Modes

/exec/configure/vpc-domain

rollback progress stats

[no] rollback progress stats

Syntax Description


no	negate the command
rollback	Rollback configuration
progress	Rollback progress
stats	Enable rollback progress stats

Command Modes

/exec

rollback running-config

rollback running-config { checkpoint chkpoint_name | file file_uri } [ best-effort | stop-at-first-failure | atomic ] [verbose]

Syntax Description


rollback	Rollback configuration
running-config	Rollback running configuration
checkpoint	Rollback running configuration to checkpoint
`chkpoint_name`	Type: string length: 80 Checkpoint name
file	Rollback running configuration to configuration file
`file_uri`	Type: uri Checkpoint file path
best-effort	Skip errors and proceed with rollback
stop-at-first-failure	Stop rollback at the first error
atomic	Stop rollback and revert to original configuration (default)
verbose	Show the execution log

Command Modes

/exec

route-map

route-map route-map-name [ permit | deny ] [seq] | no route-map { route-map-name | route-map-name } [ permit | deny ] [seq]

Syntax Description


no	Negate a command or set its defaults
route-map	Create route-map or enter route-map command mode
`route-map-name`	Type: string pattern: [!-~]* length: 63 Route-map name
`route-map-name`	Type: string pattern: [!-~]* length: 63 Route-map name
`route-map-name`	Type: string Known route-map name
permit	Route map permits set operations
deny	Route map denies set operations
`seq`	Type: integer min: 0 max: 65535 Sequence to insert to/delete from existing route-map entry

Command Modes

/exec/configure

route-map pbr-statistics

route-map route-map-name pbr-statistics | no route-map { route-map-name | route-map-name } pbr-statistics

Syntax Description


no	Negate a command or set its defaults
route-map	Create route-map or enter route-map command mode
`route-map-name`	Type: string pattern: [!-~]* length: 63 Route-map name
`route-map-name`	Type: string pattern: [!-~]* length: 63 Route-map name
`route-map-name`	Type: string Known route-map name
pbr-statistics	Statistics for policy based routing

Command Modes

/exec/configure

route-reflector-client

[ no | default ] route-reflector-client

Syntax Description


no	Negate a command or set its defaults
default	Inherit values from a peer template
route-reflector-client	Configure a neighbor as Route reflector client

Command Modes

/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af
/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4
/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt
/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6
/exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

route-target both

route-target both { ext-comm-rt-aa2nn4 | ext-comm-rt-aa4nn2 } | no route-target both [ ext-comm-rt-aa2nn4 | ext-comm-rt-aa4nn2 ]

Syntax Description


no	Negate a command or set its defaults
route-target	Specify Target VPN Extended Communities
both	Export And Import Target-VPN community
`ext-comm-rt-aa4nn2`	Type: community RT extcommunity in aa4:nn or ip:nn format
`ext-comm-rt-aa2nn4`	Type: community RT extcommunity in aa:nn format

Command Modes

/exec/configure/vrf-af-ipv4
/exec/configure/vrf-af-ipv6

route-target export

route-target export { ext-comm-rt-aa2nn4 | ext-comm-rt-aa4nn2 } | no route-target export { ext-comm-rt-aa2nn4 | ext-comm-rt-aa4nn2 }

Syntax Description


no	Negate a command or set its defaults
route-target	Specify Target VPN Extended Communities
export	Export Target-VPN community
`ext-comm-rt-aa4nn2`	Type: community RT extcommunity in aa4:nn or ip:nn format
`ext-comm-rt-aa2nn4`	Type: community RT extcommunity in aa:nn format

Command Modes

/exec/configure/vrf-af-ipv4
/exec/configure/vrf-af-ipv6

route-target import

route-target import { ext-comm-rt-aa2nn4 | ext-comm-rt-aa4nn2 } | no route-target import { ext-comm-rt-aa2nn4 | ext-comm-rt-aa4nn2 }

Syntax Description


no	Negate a command or set its defaults
route-target	Specify Target VPN Extended Communities
import	Import Target-VPN community
`ext-comm-rt-aa4nn2`	Type: community RT extcommunity in aa4:nn or ip:nn format
`ext-comm-rt-aa2nn4`	Type: community RT extcommunity in aa:nn format

Command Modes

/exec/configure/vrf-af-ipv4
/exec/configure/vrf-af-ipv6

router-id (bgp)

[no] router-id router-id

Syntax Description


no	Negate a command or set its defaults
router-id	Specify the IP address to use as router-id
`router-id`	Type: ipaddr Manually configured router identifier

Command Modes

/exec/configure/router-bgp/vrf-cmds

router-id (ospf)

router-id id | no router-id [id]

Syntax Description


no	Negate a command or set its defaults
router-id	Set OSPF process router-id
`id`	Type: ipaddr Router ID Value

Command Modes

/exec/configure/router-ospf
/exec/configure/router-ospf/vrf

router-id (ospfv3)

router-id id | no router-id [id]

Syntax Description


no	Negate a command or set its defaults
router-id	Set OSPFv3 process router-id
`id`	Type: ipaddr Router ID Value

Command Modes

/exec/configure/router-ospf3
/exec/configure/router-ospf3/vrf

router bgp

[no] router bgp as

Syntax Description


no	Negate a command or set its defaults
router	Enable a routing process
bgp	Border Gateway Protocol (BGP)

Command Modes

/exec/configure

router eigrp (eigrp)

[no] { ip | ipv6 } router eigrp eigrp-ptag

Syntax Description


no	Negate a command or set its defaults
ip	Configure IP features
ipv6	Configure IPv6 features
router	Enable a routing process
eigrp	Configure an EIGRP routing process on interface
`eigrp-ptag`	Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting \| all \| fsm \| graceful-restart \| interface \| interfaces \| internal \| neighbor \| neighbors \| notifications \| packets \| prefix \| route \| route-map \| shutdown \| summary \| topology \| traffic \| transmit \| urib \| vrf \| vrf-events length: 20 Process tag

Command Modes

/exec/configure/if-igp

router eigrp (eigrp)

[no] router eigrp eigrp-ptag

Syntax Description


no	Negate a command or set its defaults
router	Enable a routing process
eigrp	Enhanced Interior Gateway Routing Protocol (EIGRP)
`eigrp-ptag`	Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting \| all \| fsm \| graceful-restart \| interface \| interfaces \| internal \| neighbor \| neighbors \| notifications \| packets \| prefix \| route \| route-map \| shutdown \| summary \| topology \| traffic \| transmit \| urib \| vrf \| vrf-events length: 20 Process tag

Command Modes

/exec/configure

router isis

[no] router isis tag

Syntax Description


no	Negate a command or set its defaults
router	Enable a routing process
isis	Intermediate System to Intermediate System (IS-IS)
`tag`	Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Routing process tag

Command Modes

/exec/configure

router ospf

[no] router ospf tag

Syntax Description


no	Negate a command or set its defaults
router	Enable a routing process
ospf	Open Shortest Path First (OSPF)
`tag`	Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency \| all \| border-routers \| database \| database-timers \| events \| flooding \| graceful-restart \| hello \| interface \| internal \| lsa-content-changed-list \| lsa-generation \| memory \| mpls \| neighbor \| neighbors \| packets \| policy \| redist \| request-list \| retransmission \| retransmission-list \| route \| spf \| spf-trigger \| statistics \| summary-address \| traffic \| virtual-links \| vrf length: 20 Process tag

Command Modes

/exec/configure

router ospfv3

[no] router ospfv3 tag

Syntax Description


no	Negate a command or set its defaults
router	Enable a routing process
ospfv3	Open Shortest Path First (OSPF) (Version 3)
`tag`	Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency \| all \| border-routers \| database \| database-timers \| events \| flooding \| graceful-restart \| hello \| interface \| internal \| lsa-content-changed-list \| lsa-generation \| memory \| mpls \| neighbor \| neighbors \| packets \| policy \| redist \| request-list \| retransmission \| retransmission-list \| route \| spf \| spf-trigger \| statistics \| summary-address \| traffic \| virtual-links \| vrf length: 20 Process tag

Command Modes

/exec/configure

router rip (rip)

[no] ip router rip tag

Syntax Description


no	Negate a command or set its defaults
ip	Configure IP features
router	Enable a routing process
rip	Routing Information Protocol (RIP)
`tag`	Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Process tag

Command Modes

/exec/configure/if-igp

router rip (rip)

[no] router rip tag

Syntax Description


no	Negate a command or set its defaults
router	Enable a routing process
rip	Routing Information Protocol (RIP)
`tag`	Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Process ID

Command Modes

/exec/configure

routing-context vrf

routing-context vrf vrf-known-name

Syntax Description


routing-context	Set the routing context
vrf	The new routing-context VRF
`vrf-known-name`	Type: vrf Known VRF name

Command Modes

/exec

routing multicast file-debug

[no] { ip | ipv4 } routing multicast file-debug

Syntax Description


no	Negate a command or set its defaults
ip	Configure IP features
ipv4	Configure IP features
routing	Routing information
multicast	Configure multicast
file-debug	Collect all debugs to a file

Command Modes

/exec/configure

routing multicast holddown

{ ip | ipv4 } routing multicast holddown { route-holddown-sec | none } | no { ip | ipv4 } routing multicast holddown [ route-holddown-sec | none ]

Syntax Description


no	Negate a command or set its defaults
ip	Configure IP features
ipv4	Configure IP features
routing	Routing information
multicast	Configure multicast
holddown	Initial holddown period
`route-holddown-sec`	Type: uinteger min: 90 max: 210 default: 210 Delay in seconds
`none`	Type: uinteger min: 0 max: 0 Disable holddown

Command Modes

/exec/configure

rsakeypair

[no] rsakeypair s0 [i0]

Syntax Description


no	Negate a command or set its defaults
rsakeypair	Configure trustpoint rsa key-pair details
`s0`	Type: string length: 64 key-pair label
`i0`	Type: integer min: 512 max: 2048 key-pair size

Command Modes

/exec/configure/trustpoint

rule

rule number action { permission [ featuretype name ] | command cmd_line } | no rule number

Syntax Description


no	Negate a command or set its defaults
rule	Enter the rule number
`number`	Type: integer min: 1 max: 256 Enter the rule number
`action`	Action permit value: 1 Permit rule deny value: 2 Deny rule
`permission`	Permission read value: 1 Read access read-write value: 2 Read and write access
command	Command line
`cmd_line`	Type: remainder Enter the command (use space+';' for command separator) e.g. config t ; role *
`featuretype`	Feature type feature value: 2 Feature name feature-group value: 3 Feature group name
`name`	Type: string length: 32 Enter the access entity name

Command Modes

/exec/configure/role

rule oid

rule number action permission oid snmp_oid | no rule number

Syntax Description


no	Negate a command or set its defaults
rule	Enter the rule number
`number`	Type: integer min: 1 max: 256 Enter the rule number
`action`	Action permit value: 1 Permit rule deny value: 2 Deny rule
`permission`	Permission read value: 1 Read access read-write value: 2 Read and write access
oid	SNMP oid (up to 32 elements)
`snmp_oid`	Type: string length: 1024 Enter snmp oid instance name

Command Modes

/exec/configure/role

run-script

run-script uri0

Syntax Description


run-script	Run shell scripts
`uri0`	Type: uri Enter script file name

Command Modes

/exec

run-show-tech-script

run-show-tech-script s0

Syntax Description


run-show-tech-script	Run show tech script
`s0`	Type: string fname

Command Modes

/exec

run bash

run bash [cmd]

Syntax Description


run	execute/run program Not available in this release.
bash	linux-bash Not available in this release.
`cmd`	Type: remainder the command to execute

Command Modes

/exec

Bias-Free Language

Results

Chapter: R Commands

R Commands

radius-server deadtime

Syntax Description

Command Modes

radius-server directed-request

Syntax Description

Command Modes

radius-server host

Syntax Description

Command Modes

radius-server key 0

Syntax Description

Command Modes

radius-server pss-clean

Syntax Description

Command Modes

radius-server retransmit

Syntax Description

Command Modes

radius-server timeout

Syntax Description

Command Modes

random-detect (qosmgr)

Syntax Description

Command Modes

random-detect (qosmgr)

Syntax Description

Command Modes

random-detect cos-based

Syntax Description

Command Modes

rate-limit

Syntax Description

Command Modes

rate-limit cpu direction pps action log (pm)

Syntax Description

Command Modes

rate-limit cpu direction pps action log (pm)

Syntax Description

Command Modes

rate-limiter

Syntax Description

Command Modes

rate-mode

Syntax Description

Command Modes

rd

Syntax Description

Command Modes

redistribute-internal

Syntax Description

Command Modes

redistribute bgp (ospf)

Syntax Description

Command Modes

redistribute bgp (ospfv3)

Syntax Description

Command Modes

redistribute maximum-prefix (isis)

Syntax Description

Command Modes

redistribute maximum-prefix (eigrp)

Syntax Description

Command Modes

redistribute maximum-prefix (isis)

Syntax Description

Command Modes

redistribute maximum-prefix (ospf)

Syntax Description

Command Modes

redistribute maximum-prefix (ospfv3)

Syntax Description

Command Modes

redistribute route-map (bgp)

Syntax Description

Command Modes