P Commands

parity (syscli)

[no] parity { even | none | odd }

Syntax Description

no

Negate a command or set its defaults
parity

Set terminal parity
even

Even parity
none

No parity
odd

Odd parity

Command Modes

  • /exec/configure/console

parity (syscli)

[no] parity { even | none | odd }

Syntax Description

no

Negate a command or set its defaults
parity

Set terminal parity
even

Even parity
none

No parity
odd

Odd parity

Command Modes

  • /exec/configure/com1

passive-interface default (eigrp)

[no] passive-interface default

Syntax Description

no

Negate a command or set its defaults
passive-interface

Suppress routing updates on the interface
default

interfaces passive by default

Command Modes

  • /exec/configure/router-eigrp/router-eigrp-vrf-common
  • /exec/configure/router-eigrp/router-eigrp-af-common

passive-interface default (isis)

[no] passive-interface default level

Syntax Description

no

Negate a command or set its defaults
passive-interface

Suppress IS-IS PDU
default

Undo a command
level

IS-IS level

level-1  value: 1
Suppress level-1 PDU
level-2  value: 2
Suppress level-2 PDU
level-1-2  value: 3
Suppress level-1 and level-2 PDU

Command Modes

  • /exec/configure/router-isis/router-isis-vrf-common

passive-interface default (ospf)

[no] passive-interface default

Syntax Description

no

Negate a command or set its defaults
passive-interface

Suppress routing updates on the interface
default

interfaces passive by default

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

passive-interface default (ospfv3)

[no] passive-interface default

Syntax Description

no

Negate a command or set its defaults
passive-interface

Suppress routing updates on the interface
default

interfaces passive by default

Command Modes

  • /exec/configure/router-ospf3
  • /exec/configure/router-ospf3/vrf

passive-interface eigrp

[ default | no ] { ip | ipv6 } passive-interface eigrp eigrp-ptag

Syntax Description

default

Undo a command
no

Negate a command or set its defaults
ip

Configure IP features
ipv6

Configure IPv6 features
passive-interface

Suppress routing updates on an interface
eigrp

EIGRP interface configuration commands
eigrp-ptag

Type: string

pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events

length: 20

Process tag

Command Modes

  • /exec/configure/if-igp

password secure-mode

[no] password secure-mode

Syntax Description

no

Negate a command or set its defaults
password

Password for the user
secure-mode

Enable secure mode for changing password

Command Modes

  • /exec/configure

password strength-check

[no] password strength-check

Syntax Description

no

Negate a command or set its defaults
password

Password for the user
strength-check

Strength check of password

Command Modes

  • /exec/configure

passwordpassword

password password-string | { no | default } password [password-string]

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
password

Configure a password for neighbor
password-string

Type: password

Neighbor password

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor
  • /exec/configure/router-bgp/router-bgp-neighbor-stmp
  • /exec/configure/router-bgp/router-bgp-vrf-neighbor
  • /exec/configure/router-bgp/router-bgp-template-neighbor
  • /exec/configure/router-bgp/router-bgp-prefixneighbor
  • /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

pause

[no] pause { delayed-drop timeout | [ buffer-size size-in-bytes pause-threshold xoff-bytes resume-threshold xon-bytes ] pfc-cos pfc-cos-list }

Syntax Description

no

Negate a command or set its defaults
pause

PAUSE charecteristics (CBFC) Available only in the 9500 series.
delayed-drop

Enable delayed-drop for the CoS
timeout

Type: uinteger

min: 1  max: 65535  

Timer value for delayed drop
buffer-size

Ingress buffer size in bytes
pause-threshold

Buffer limit for pausing in bytes
resume-threshold

Buffer limit at which to resume in bytes
size-in-bytes

Type: long

Ingress buffer for the no-drop class in bytes
xoff-bytes

Type: long

Buffer limit at which the port pauses the peer
xon-bytes

Type: long

Buffer limit at which the port resumes the peer
pfc-cos

CoS values to assert PFC on
pfc-cos-list

Type: integer-mrange

List of class-of-service values

Command Modes

  • /exec/configure/policy-map/type/uf/class

peer-gateway

peer-gateway [ exclude-vlan vlan-list ] | no peer-gateway

Syntax Description

no

Negate a command or set its defaults
peer-gateway

Enable L3 forwarding for packets destined to peer's gateway mac-address
exclude-vlan

Specify VLANs to be excluded from peer-gateway functionality Not available in this release.
vlan-list

Type: vlan-mrange

Specify the list of vlans

Command Modes

  • /exec/configure/vpc-domain

peer-keepalive destination

peer-keepalive destination dst-ip [ [ source src-ip | udp-port udp-port-num | vrf { vrf-name | vrf-known-name } | interval interval-ms timeout time-out | tos-byte tos-byte-value | hold-timeout hold-time-out ] | + | [ source src-ip | udp-port udp-port-num | vrf { vrf-name | vrf-known-name } | interval interval-ms timeout time-out | tos { tos-value | min-delay | max-throughput | max-reliability | min-monetary-cost | normal } | hold-timeout hold-time-out ] | + | [ source src-ip | udp-port udp-port-num | vrf { vrf-name | vrf-known-name } | interval interval-ms timeout time-out | precedence { prec-vlaue | network | internet | critical | flash-override | flash | immediate | priority | routine } | hold-timeout hold-time-out ] | + ]

Syntax Description

peer-keepalive

Keepalive/Hello with peer switch
destination

specify destination ip address of peer switch
dst-ip

Type: ipaddr

IPv4 address (A.B.C.D) of destination
source

source interface for hello
src-ip

Type: ipaddr

IPv4 address (A.B.C.D) of source
udp-port

enter UDP port number used for hello
udp-port-num

Type: integer

min: 1024  max: 65000  

udp port number for hellos
vrf

vrf to be used for hello messages
vrf-name

Type: string

vrf to be used for hellos
vrf-known-name

Type: vrf

Known VRF name
interval

enter interval in milleseconds
interval-ms

Type: integer

min: 400  max: 10000  

Enter interval in milleseconds
timeout

enter timeout in seconds
time-out

Type: integer

min: 3  max: 20  

enter timeout in seconds
precedence

Precedence
prec-vlaue

Type: integer

min: 0  max: 7  

Precedence value
network

network (7)
internet

internet (6)
critical

critical (5)
flash-override

flash-override (4)
flash

flash (3)
immediate

immediate (2)
priority

priority (1)
routine

routine (0)
tos

Type of Service
tos-value

Type: integer

min: 0  max: 15  

Enter 4-bit TOS value
min-delay

min-delay (8)
max-throughput

max-throughput (4)
max-reliability

max-reliability (2)
min-monetary-cost

min-monetary-cost (1)
normal

normal (0)
tos-byte

Type of Service Byte
tos-byte-value

Type: integer

min: 0  max: 255  

Enter 8-bit TOS value
hold-timeout

hold timeout to ignore stale peer alive messages
hold-time-out

Type: integer

min: 3  max: 10  

Enter hold-timeout in seconds

Command Modes

  • /exec/configure/vpc-domain

peer-switch

[no] peer-switch

Syntax Description

no

Negate a command or set its defaults
peer-switch

Enable peer switch on vPC pair switches

Command Modes

  • /exec/configure/vpc-domain

perf

perf [ record { context-switch | profile } { system | process i0 } [s1] | stop { all | s0 } | list | create-archive s2 | remove { all | s3 } ]

Syntax Description

no

Negate a command or set its defaults
perf

Run perf tool to collect or process event data
record

Record events to a file for later analysis
stop

Stop a perf record.
list

List recorded datasets
create-archive

Create an archive of dataset for download
remove

Remove recorded dataset(s)
all

Act on all recorded datasets
context-switch

Record context-switch events
profile

Record periodic runtime samples
system

Record events for all processes on all CPUS
process

Record events for a specific process with the given pid
i0

Type: integer

min: 1  max: 32768  

pid of process to record events
s0

Type: string

id of perf record session to stop

s1

Type: string

id to use for perf record session
s2

Type: string

id of perf dataset to create an archive
s3

Type: string

id of perf dataset to remove

Command Modes

  • /exec

periodic-inventory notification (callhome)

periodic-inventory notification { interval i0 | timeofday s0 }

Syntax Description

periodic-inventory

Configure periodic software inventory message dispatch
notification

Enable periodic software inventory message dispatch
interval

Configure the time period for periodic inventory
i0

Type: integer

min: 1  max: 30  

Time period in days (default is 7 days)
timeofday

Configure the timeofday for periodic inventory in HH:MM format
s0

Type: string

length: 5

Time period in HH:MM format

Command Modes

  • /exec/configure/callhome

periodic-inventory notification (callhome)

[no] periodic-inventory notification

Syntax Description

no

Negate a command or set its defaults
periodic-inventory

Configure periodic software inventory message dispatch
notification

Enable periodic software inventory message dispatch

Command Modes

  • /exec/configure/callhome

periodic to (aclmgr)

{ [seqno] | no } periodic { Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday } stime to eday etime

Syntax Description

seqno

Type: uinteger

min: 1  max: 4294967295  

Sequence number
no

Negate a command or set its defaults
periodic

Periodic time and date
Monday

Monday
Tuesday

Tuesday
Wednesday

Wednesday
Thursday

Thursday
Friday

Friday
Saturday

Saturday
Sunday

Sunday
eday

Day of the week

Monday  value: 1
Monday
Tuesday  value: 2
Tuesday
Wednesday  value: 3
Wednesday
Thursday  value: 4
Thursday
Friday  value: 5
Friday
Saturday  value: 6
Saturday
Sunday  value: 7
Sunday
stime

Type: time

Starting time
to

Ending day and time
etime

Type: time

Ending time

Command Modes

  • /exec/configure/timerange

periodic to (aclmgr)

{ [seqno] | no } periodic { { Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday } | + | daily | weekdays | weekend } stime to etime

Syntax Description

seqno

Type: uinteger

min: 1  max: 4294967295  

Sequence number
no

Negate a command or set its defaults
periodic

Periodic time and date
Monday

Monday
Tuesday

Tuesday
Wednesday

Wednesday
Thursday

Thursday
Friday

Friday
Saturday

Saturday
Sunday

Sunday
daily

Every day of the week
weekdays

Monday thru Friday
weekend

Saturday and Sunday
stime

Type: time

Starting time
to

Ending day and time
etime

Type: time

Ending time

Command Modes

  • /exec/configure/timerange

permit interface

[no] permit interface if0

Syntax Description

no

Negate a command or set its defaults
permit

Permit access to interfaces (applicable if interface policy is 'deny')
interface

Enter the range of interfaces accessible the role
if0

Type: interface-mrange

Enter the interface range

Command Modes

  • /exec/configure/role/interface

permit vlan

[no] permit vlan vlan-mrange

Syntax Description

no

Negate a command or set its defaults
permit

Permit access to vlans (applicable if vlan policy is 'deny')
vlan

Enter the range of vlans accessible the role
vlan-mrange

Type: vlan-mrange

Enter the vlan range

Command Modes

  • /exec/configure/role/vlan

permit vrf

[no] permit vrf vrf-name

Syntax Description

no

Negate a command or set its defaults
permit

Permit access to vrf (applicable if vrf policy is 'deny')
vrf

Enter the range of vrf accessible the role
vrf-name

Type: vrf

pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

Enter the vrf name

Command Modes

  • /exec/configure/role/vrf

permit vsan

[no] permit vsan vsan-mrange

Syntax Description

no

Negate a command or set its defaults
permit

Permit access to vsans (applicable if vsan policy is 'deny')
vsan

Enter the range of vsans accessible the role
vsan-mrange

Type: vsan-mrange

Enter the vsan range

Command Modes

  • /exec/configure/role/vsan

phone-contact

phone-contact s0 | no phone-contact

Syntax Description

no

Negate a command or set its defaults
phone-contact

Contact person's phone number
s0

Type: string

length: 17

Phone number in international format(such as +1-800-123-4567)

Command Modes

  • /exec/configure/callhome

ping

ping [ { { alpha | numeric } | multicast group interface interface [loopback] } [ count { count | unlimited } | vrf { vrf-name | vrf-known-name } | packet-size packetsize | interval interval | source { alpha | numeric1 } | df-bit | timeout timeout ] + ]

Syntax Description

numeric

Type: ipaddr

IP address of remote system
vrf

Display per-VRF information
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name

Command Modes

  • /exec

ping6

ping6 { { host | hostname } [ source { host1 | hostname } ] | multicast group } [ count { count | unlimited } | packet-size packetsize | vrf { vrf-name | vrf-known-name } | timeout timeout | interval interval ] +

Syntax Description

host

Type: ipv6addr

IPv6 address format: aaaa:bbbb:cccc:dddd:eeee:ffff:gggg:hhhh, aaaa::bbbb
vrf

Display per-VRF information
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name

Command Modes

  • /exec

pinning max-links

pinning max-links max-flinks | no pinning max-links

Syntax Description

no

Negate the command
pinning

Pinning configurations
max-links

Number of Fabric links
max-flinks

Type: integer

min: 1  max: 8  

Number of fabric links

Command Modes

  • /exec/configure/fex

pinning mode

pinning mode [ static | dynamic | least-used | static-dist ] | no pinning mode

Syntax Description

no

Negate the command
pinning

Pinning configurations
mode

Pinning mode
static

Static pinning mode
dynamic

Dynamic pinning mode
least-used

Least used pinning mode
static-dist

Static uneven pinning mode

Command Modes

  • /exec/configure/fex

pipe begin exclude include end -i -x

" | " { begin | exclude | include | end } [ -i | -x ] + expr [ next num | prev num ] +

Syntax Description

|

Pipe command output to filter
begin

Begin with the line that matches
exclude

Exclude lines that match
include

Include lines that match
end

End with the line that matches
-i

Ignore case difference when comparing strings
-x

Print only lines where the match is a whole line
expr

Type: string

antipattern:  | \ | -A\ | -B\ | -c\ | -i\ | -n\ | \-v\ | -w\ | -x

Search for the expression
next

Print <num> lines of context after every matching line
prev

Print <num> lines of context before every matching line
num

Type: integer

min: 1  max: 999  

Print <num> lines of context

Command Modes

  • /output

pipe grep egrep -c -i -n -v -w -x (clic)

" | " { grep | egrep } [ -c | -i | -n | -v | -w | -x | ctx | -A num | -B num ] + [--] expr

Syntax Description

|

Pipe command output to filter
grep

Grep
egrep

Egrep
-c

Print a total count of matching lines only
-i

Ignore case difference when comparing strings
-n

Print each match preceded by its line number
-v

Print only lines that contain no matches for <expr>
-w

Print only lines where the match is a complete word
-x

Print only lines where the match is a whole line
ctx

Type: integer

Print <num> lines of context on each side of every match
-A

Print <num> lines of context after every matching line
-B

Print <num> lines of context before every matching line
num

Type: integer

min: 1  max: 999  

Print <num> lines of context
--

--
expr

Type: string

antipattern:  | \ | -A\ | -B\ | -c\ | -i\ | -n\ | \-v\ | -w\ | -x

Search for the expression

Command Modes

  • /output

pipe grep egrep -c -i -n -v -w -x (clic)

" | " { grep | egrep } [ -c | -i | -n | -v | -w | -x | ctx | -A num | -B num ] + expr

Syntax Description

|

Pipe command output to filter
grep

Grep - print lines matching a pattern
egrep

Egrep - print lines matching a pattern
-c

Print a total count of matching lines only
-i

Ignore case difference when comparing strings
-n

Print each match preceded by its line number
-v

Print only lines that contain no matches for <expr>
-w

Print only lines where the match is a complete word
-x

Print only lines where the match is a whole line
ctx

Type: integer

Print <num> lines of context on each side of every match
-A

Print <num> lines of context after every matching line
-B

Print <num> lines of context before every matching line
num

Type: integer

min: 1  max: 999  

Print <num> lines of context
expr

Type: string

antipattern:  | \ | -A\ | -B\ | -c\ | -i\ | -n\ | \-v\ | -w\ | -x

Search for the expression

Command Modes

  • /output

pipe grep egrep count ignore-case line-number invert-match word-exp line-exp

" | " { grep | egrep } [ count | ignore-case | line-number | invert-match | word-exp | line-exp | ctx | next num | prev num ] + expr

Syntax Description

|

Pipe command output to filter
grep

Grep - print lines matching a pattern
egrep

Egrep - print lines matching a pattern
count

Print a total count of matching lines only
ignore-case

Ignore case difference when comparing strings
line-number

Print each match preceded by its line number
invert-match

Print only lines that contain no matches for <expr>
word-exp

Print only lines where the match is a complete word
line-exp

Print only lines where the match is a whole line
ctx

Type: integer

Print <num> lines of context on each side of every match
next

Print <num> lines of context after every matching line
prev

Print <num> lines of context before every matching line
num

Type: integer

min: 1  max: 999  

Print <num> lines of context
expr

Type: string

antipattern:  | \ | -A\ | -B\ | -c\ | -i\ | -n\ | \-v\ | -w\ | -x

Search for the expression

Command Modes

  • /output

pktmgr cache disable

[no] pktmgr cache disable

Syntax Description

no

Negate a command or set its defaults
pktmgr

packet manager
cache

Disable cache
disable

Disable cache

Command Modes

  • /exec/configure

pktmgr discard detail direction

[no] pktmgr discard [ type type ] [ direction direction ] [detail]

Syntax Description

no

Negate a command or set its defaults
pktmgr

packet manager
discard

discard CPI-bound output packets
detail

detailed discard info
direction

pm debug-filter direction
direction

pm direction

inbound  value: 1
pm inbound debug-filter
outbound  value: 2
pm outbound debug-filter
both  value: 0
pm bi-directional (default)
type

Driver type
type

Driver type

inband  value: 1
Inband
mgmt  value: 3
Mgmt

Command Modes

  • /exec

plugin-test load

plugin-test load uri0 [ [uri1] [uri2] ]

Syntax Description

plugin-test

PLUGIN test
load

PLUGIN test load
uri0

Type: uri

Enter image name
uri1

Type: uri

Enter image name
uri2

Type: uri

Enter image name

Command Modes

  • /exec

plugin-test unload

plugin-test unload s0 [ [s1] [s2] ]

Syntax Description

plugin-test

PLUGIN test
unload

plugin test unload
s0

Type: string

Enter swid
s1

Type: string

Enter swid
s2

Type: string

Enter swid

Command Modes

  • /exec

police (copp_cli)

police [cir] { cir-val [opt_kbps_mbps_gbps_pps_cir] | percent cir-perc } [ [bc] bc-val [opt_kbytes_mbytes_gbytes_bc] ] [ pir { pir [opt_kbps_mbps_gbps_pps_pir] | percent1 pir-perc } [ [be] be-val [opt_kbytes_mbytes_gbytes_be] ] ] [ conform { opt_drop_transmit_conform | set-cos-transmit set-cos-val | set-dscp-transmit { set-dscp-val | opt_set_dscp } | set-prec-transmit { set-prec-val | opt_set_prec } } [ exceed { opt_drop_transmit_exceed | set dscp1 dscp2 table cir-markdown-map } ] [ violate { opt_drop_transmit_violate | set1 dscp3 dscp4 table1 pir-markdown-map } ] ]

Syntax Description

police

Police
cir

Specify committed information rate
cir-val

Type: long

Committed Information Rate in pps
opt_kbps_mbps_gbps_pps_cir

Units

pps  value: 8
Packets per second
percent

Specify rate as percentage of interface data-rate Not available in this release.
cir-perc

Type: long

Percentage
pir

Specify peak information rate Not available in this release.
pir

Type: long

Peak Information Rate in bps/kbps/mbps/gbps
opt_kbps_mbps_gbps_pps_pir

Units

bps  value: 1
Bits per second
kbps  value: 2
Kilo Bits per second
mbps  value: 3
Mega Bits per second
gbps  value: 4
Giga Bits per second
pps  value: 8
Packets per second
percent1

Specify rate as percentage of interface data-rate Not available in this release.
pir-perc

Type: long

Percentage
be

Specify extended burst Not available in this release.
be-val

Type: long

Peak Burst Size in bytes/kbytes/mbytes/packets/ms/us
opt_kbytes_mbytes_gbytes_be

Units

bytes  value: 1
Bytes
kbytes  value: 2
Kilo Bytes
mbytes  value: 3
Mega Bytes
packets  value: 8
Packets
ms  value: 5
Milli seconds
us  value: 6
Micro seconds
bc

Specify committed burst
bc-val

Type: long

Committed Burst Size in packets
opt_kbytes_mbytes_gbytes_bc

Units

packets  value: 8
Packets
conform

Specify a conform action
opt_drop_transmit_conform

Set the action

transmit  value: 1
Transmit the packet
set-cos-transmit

Set conform action cos val Not available in this release.
set-cos-val

Type: uinteger

min: 0  max: 7  

802.1Q Class of Service value
set-dscp-transmit

Set conform action dscp val Not available in this release.
set-dscp-val

Type: uinteger

min: 0  max: 63  

DSCP value
opt_set_dscp
af11  value: 10
AF11 dscp (001010)
af12  value: 12
AF12 dscp (001100)
af13  value: 14
AF13 dscp (001110)
af21  value: 18
AF21 dscp (010010)
af22  value: 20
AF22 dscp (010100)
af23  value: 22
AF23 dscp (010110)
af31  value: 26
AF31 dscp (011010)
af32  value: 28
AF32 dscp (011100)
af33  value: 30
AF33 dscp (011110)
af41  value: 34
AF41 dscp (100010)
af42  value: 36
AF42 dscp (100100)
af43  value: 38
AF43 dscp (100110)
cs1  value: 8
CS1(precedence 1) dscp (001000)
cs2  value: 16
CS2(precedence 2) dscp (010000)
cs3  value: 24
CS3(precedence 3) dscp (011000)
cs4  value: 32
CS4(precedence 4) dscp (100000)
cs5  value: 40
CS5(precedence 5) dscp (101000)
cs6  value: 48
CS6(precedence 6) dscp (110000)
cs7  value: 56
CS7(precedence 7) dscp (111000)
default  value: 0
default dscp (000000)
ef  value: 46
EF dscp (101110)
set-prec-transmit

Set conform action precedence val Not available in this release.
set-prec-val

Type: uinteger

min: 0  max: 7  

IP Precedence value
opt_set_prec
routine  value: 0
Routine precedence (0)
priority  value: 1
Priority precedence (1)
immediate  value: 2
Immediate precedence (2)
flash  value: 3
Flash precedence (3)
flash-override  value: 4
Flash override precedence (4)
critical  value: 5
Critical precedence (5)
internet  value: 6
Internetwork control precedence (6)
network  value: 7
Network control precedence (7)
exceed

Specify a exceed action Not available in this release.
opt_drop_transmit_exceed

Set the action

drop  value: 2
Drop the packet
transmit  value: 1
Transmit the packet
set

Set exceed action to cir-markdown-map Not available in this release.
dscp1

Exceed from field
dscp2

Exceed to field
table

To specify table name
cir-markdown-map

Well known markdown map
violate

Specify a violate action
opt_drop_transmit_violate

Set the action

drop  value: 2
Drop the packet
set1

Set violate action to pir-markdown-map Not available in this release.
dscp3

Violate from field
dscp4

Violate to field
table1

To specify table name
pir-markdown-map

Well known markdown map

Command Modes

  • /exec/configure/pmap/class

police (qosmgr)

[no] police { [cir] { cir-val [ bps | kbps | mbps | gbps | pps ] | percent cir-perc } [ [bc] committed-burst [ bytes | kbytes | mbytes | ms | us | packets ] ] [ pir { pir-val [ bps2 | kbps2 | mbps2 | gbps2 | pps2 ] | percent pir-perc } [ [be] extended-burst [ bytes2 | kbytes2 | mbytes2 | ms2 | us2 | packets2 ] ] ] [ conform { transmit | set-prec-transmit { prec-val | prec-enum } | set-dscp-transmit { dscp-val | dscp-enum } | set-cos-transmit cos-val | set-discard-class-transmit disc-class-val | set-qos-transmit qos-grp-val | set-mpls-exp-imposition-transmit exp-value-imp | set-mpls-exp-topmost-transmit exp-value-top } [ exceed { drop1 | set exc-frm-field exc-to-field table cir-markdown-map | set-prec-transmit1 { prec-val1 | prec-enum1 } | set-dscp-transmit1 { dscp-val1 | dscp-enum1 } | set-cos-transmit1 cos-val1 | set-discard-class-transmit1 disc-class-val1 | set-qos-transmit1 qos-grp-val1 | set-mpls-exp-imposition-transmit1 exp-value-imp1 | set-mpls-exp-topmost-transmit1 exp-value-top1 } ] [ violate { drop2 | set vio-frm-field vio-to-field table2 pir-markdown-map | set-prec-transmit2 { prec-val2 | prec-enum2 } | set-dscp-transmit2 { dscp-val2 | dscp-enum2 } | set-cos-transmit2 cos-val2 | set-discard-class-transmit2 disc-class-val2 | set-qos-transmit2 qos-grp-val2 | set-mpls-exp-imposition-transmit2 exp-value-imp2 | set-mpls-exp-topmost-transmit2 exp-value-top2 } ] ] | aggregate policer-name }

Syntax Description

no

Negate a command or set its defaults
police

police
cir

Specify committed information rate
cir-val

Type: long

Committed Information Rate value in bps/kbps/mbps/gbps/pps
bc

Specify committed burst
committed-burst

Type: long

Committed Burst value in bytes/kbytes/mbytes/ms/us/packets
percent

Specify rate as percentage of interface data-rate
cir-perc

Type: uinteger

min: 1  max: 100  

Percentage
pir-perc

Type: uinteger

min: 1  max: 100  

Percentage
pir

Specify peak information rate
pir-val

Type: long

Peak Information Rate value in bps/kbps/mbps/gbps/pps
be

Specify extended burst (for 1R3C meter)
extended-burst

Type: long

Value of extended burst in bytes/kbytes/mbytes/ms/us/packets
bps

Bits per second
kbps

Kilo bits per second
mbps

Mega bits per second
gbps

Giga bits per second
pps

Packets per second
bps2

Bits per second
kbps2

Kilo Bits per second
mbps2

Mega Bits per second
gbps2

Giga Bits per second
pps2

Packets per second
bytes

Bytes
kbytes

Kilo bytes
mbytes

Mega bytes
us

Micro second(s)
ms

Milli second(s)
packets

Packets
bytes2

Bytes
kbytes2

Kilo Bytes
mbytes2

Mega Bytes
ms2

Milli seconds
us2

Micro seconds
packets2

Packets
conform

Specify a conform action
exceed

Specify a exceed action
violate

Specify a violate action
transmit

Transmit packet
drop1

Drop packet
drop2

Drop packet
set-prec-transmit

Set precedence and send it
set-prec-transmit1

Set precedence and send it
set-prec-transmit2

Set precedence and send it
prec-val

Type: uinteger

min: 0  max: 7  

Precedence value
prec-val1

Type: uinteger

min: 0  max: 7  

Precedence value
prec-val2

Type: uinteger

min: 0  max: 7  

Precedence value
prec-enum
routine  value: 0
Routine precedence (0)
priority  value: 1
Priority precedence (1)
immediate  value: 2
Immediate precedence (2)
flash  value: 3
Flash precedence (3)
flash-override  value: 4
Flash override precedence (4)
critical  value: 5
Critical precedence (5)
internet  value: 6
Internetwork control precedence (6)
network  value: 7
Network control precedence (7)
prec-enum1
routine  value: 0
Routine precedence (0)
priority  value: 1
Priority precedence (1)
immediate  value: 2
Immediate precedence (2)
flash  value: 3
Flash precedence (3)
flash-override  value: 4
Flash override precedence (4)
critical  value: 5
Critical precedence (5)
internet  value: 6
Internetwork control precedence (6)
network  value: 7
Network control precedence (7)
prec-enum2
routine  value: 0
Routine precedence (0)
priority  value: 1
Priority precedence (1)
immediate  value: 2
Immediate precedence (2)
flash  value: 3
Flash precedence (3)
flash-override  value: 4
Flash override precedence (4)
critical  value: 5
Critical precedence (5)
internet  value: 6
Internetwork control precedence (6)
network  value: 7
Network control precedence (7)
set-dscp-transmit

Set dscp and send it
set-dscp-transmit1

Set dscp and send it
set-dscp-transmit2

Set dscp and send it
dscp-val

Type: uinteger

min: 0  max: 63  

DSCP value
dscp-val1

Type: uinteger

min: 0  max: 63  

DSCP value
dscp-val2

Type: uinteger

min: 0  max: 63  

DSCP value
dscp-enum
af11  value: 10
AF11 dscp (001010)
af12  value: 12
AF12 dscp (001100)
af13  value: 14
AF13 dscp (001110)
af21  value: 18
AF21 dscp (010010)
af22  value: 20
AF22 dscp (010100)
af23  value: 22
AF23 dscp (010110)
af31  value: 26
AF31 dscp (011010)
af32  value: 28
AF32 dscp (011100)
af33  value: 30
AF33 dscp (011110)
af41  value: 34
AF41 dscp (100010)
af42  value: 36
AF42 dscp (100100)
af43  value: 38
AF43 dscp (100110)
cs1  value: 8
CS1(precedence 1) dscp (001000)
cs2  value: 16
CS2(precedence 2) dscp (010000)
cs3  value: 24
CS3(precedence 3) dscp (011000)
cs4  value: 32
CS4(precedence 4) dscp (100000)
cs5  value: 40
CS5(precedence 5) dscp (101000)
cs6  value: 48
CS6(precedence 6) dscp (110000)
cs7  value: 56
CS7(precedence 7) dscp (111000)
default  value: 0
default dscp (000000)
ef  value: 46
EF dscp (101110)
dscp-enum1
af11  value: 10
AF11 dscp (001010)
af12  value: 12
AF12 dscp (001100)
af13  value: 14
AF13 dscp (001110)
af21  value: 18
AF21 dscp (010010)
af22  value: 20
AF22 dscp (010100)
af23  value: 22
AF23 dscp (010110)
af31  value: 26
AF31 dscp (011010)
af32  value: 28
AF32 dscp (011100)
af33  value: 30
AF33 dscp (011110)
af41  value: 34
AF41 dscp (100010)
af42  value: 36
AF42 dscp (100100)
af43  value: 38
AF43 dscp (100110)
cs1  value: 8
CS1(precedence 1) dscp (001000)
cs2  value: 16
CS2(precedence 2) dscp (010000)
cs3  value: 24
CS3(precedence 3) dscp (011000)
cs4  value: 32
CS4(precedence 4) dscp (100000)
cs5  value: 40
CS5(precedence 5) dscp (101000)
cs6  value: 48
CS6(precedence 6) dscp (110000)
cs7  value: 56
CS7(precedence 7) dscp (111000)
default  value: 0
default dscp (000000)
ef  value: 46
EF dscp (101110)
dscp-enum2
af11  value: 10
AF11 dscp (001010)
af12  value: 12
AF12 dscp (001100)
af13  value: 14
AF13 dscp (001110)
af21  value: 18
AF21 dscp (010010)
af22  value: 20
AF22 dscp (010100)
af23  value: 22
AF23 dscp (010110)
af31  value: 26
AF31 dscp (011010)
af32  value: 28
AF32 dscp (011100)
af33  value: 30
AF33 dscp (011110)
af41  value: 34
AF41 dscp (100010)
af42  value: 36
AF42 dscp (100100)
af43  value: 38
AF43 dscp (100110)
cs1  value: 8
CS1(precedence 1) dscp (001000)
cs2  value: 16
CS2(precedence 2) dscp (010000)
cs3  value: 24
CS3(precedence 3) dscp (011000)
cs4  value: 32
CS4(precedence 4) dscp (100000)
cs5  value: 40
CS5(precedence 5) dscp (101000)
cs6  value: 48
CS6(precedence 6) dscp (110000)
cs7  value: 56
CS7(precedence 7) dscp (111000)
default  value: 0
default dscp (000000)
ef  value: 46
EF dscp (101110)
set-cos-transmit

Set cos and send it
set-cos-transmit1

Set cos and send it
set-cos-transmit2

Set cos and send it
cos-val

Type: uinteger

min: 0  max: 7  

new cos value
cos-val1

Type: uinteger

min: 0  max: 7  

new cos value
cos-val2

Type: uinteger

min: 0  max: 7  

new cos value
set-discard-class-transmit

Set discard class and send it Not available in this release.
set-discard-class-transmit1

Set discard class and send it Not available in this release.
set-discard-class-transmit2

Set discard class and send it Not available in this release.
disc-class-val

Type: uinteger

min: 0  max: 63  

new discard-class value
disc-class-val1

Type: uinteger

min: 0  max: 63  

new discard-class value
disc-class-val2

Type: uinteger

min: 0  max: 63  

new discard-class value
set-qos-transmit

Set qos-group and send it
set-qos-transmit1

Set qos-group and send it
set-qos-transmit2

Set qos-group and send it
qos-grp-val

Type: uinteger

min: 0  max: 3  

QoS group value
qos-grp-val1

Type: uinteger

min: 0  max: 3  

QoS group value
qos-grp-val2

Type: uinteger

min: 0  max: 3  

QoS group value
set-mpls-exp-imposition-transmit

set-mpls-exp-imposition-transmit Not available in this release.
set-mpls-exp-imposition-transmit1

set-mpls-exp-imposition-transmit Not available in this release.
set-mpls-exp-imposition-transmit2

set-mpls-exp-imposition-transmit Not available in this release.
exp-value-imp

Type: uinteger

min: 0  max: 7  

MPLS imposition value
exp-value-imp1

Type: uinteger

min: 0  max: 7  

MPLS imposition value
exp-value-imp2

Type: uinteger

min: 0  max: 7  

MPLS imposition value
set-mpls-exp-topmost-transmit

Set MPLS topmost label Not available in this release.
set-mpls-exp-topmost-transmit1

Set MPLS topmost label Not available in this release.
set-mpls-exp-topmost-transmit2

Set MPLS topmost label Not available in this release.
exp-value-top

Type: uinteger

min: 0  max: 7  

MPLS topmost value
exp-value-top1

Type: uinteger

min: 0  max: 7  

MPLS topmost value
exp-value-top2

Type: uinteger

min: 0  max: 7  

MPLS topmost value
set

Set a particular value using table or markdown map
exc-frm-field
dscp  value: 2
table map of dscp type (1)
discard-class  value: 4
table map of discard-class type (2)
exc-to-field
dscp  value: 2
table map of dscp type (1)
discard-class  value: 4
table map of discard-class type (2)
vio-frm-field
dscp  value: 2
table map of dscp type (1)
discard-class  value: 4
table map of discard-class type (2)
vio-to-field
dscp  value: 2
table map of dscp type (1)
discard-class  value: 4
table map of discard-class type (2)
table

Set using the table-map Not available in this release.
table2

Set using the table-map Not available in this release.
cir-markdown-map

Markdown map table name for exceed action
pir-markdown-map

Markdown map table name for violate action
aggregate

Choose aggregate policer for current class Not available in this release.
policer-name

Type: string

length: 40

Enter aggregate-policer name

Command Modes

  • /exec/configure/policy-map/class

policy-map

[no] policy-map [ type qos ] [match-first] pmap-name-qos

Syntax Description

no

Negate a command or set its defaults
policy-map

Configure a policy map
type

Specify the type of this policy-map
qos

Qos policy
match-first

Take the action for the first class that matches
pmap-name-qos

Type: string

antipattern: type | typ | ty | t

length: 40

Policy-map name (alphanumeric)

Command Modes

  • /exec/configure

policy-map type control-plane

[no] policy-map type control-plane pmap-name

Syntax Description

no

Negate a command or set its defaults
policy-map

Configure a policy map
type

Specify the type of this policy-map
control-plane

Control-Plane
pmap-name

Type: string

antipattern: copp-system-p-+(([a-zA-Z0-9] | [- | . | _])*)

length: 64

Policy-map name (alphanumeric)

Command Modes

  • /exec/configure

policy-map type network-qos

[no] policy-map type network-qos pmap-name-nq

Syntax Description

no

Negate a command or set its defaults
policy-map

Configure a policy map
type

Specify the type of this policy-map
network-qos

Network QoS policy
pmap-name-nq

Type: string

antipattern: type | typ | ty | t

length: 40

Policy-map name

Command Modes

  • /exec/configure

policy-map type queuing

[no] policy-map type queuing [match-first] pmap-name-que

Syntax Description

no

Negate a command or set its defaults
policy-map

Configure a policy map
type

Specify the type of this policy-map
queuing

Queuing policy
match-first

Take the action for the first class that matches
pmap-name-que

Type: string

antipattern: type | typ | ty | t

length: 40

Policy-map name (alphanumeric)

Command Modes

  • /exec/configure

pong

pong { [ source smac ] destination dmac [ vlan vlan-val ] [ count count-val ] [ interface interface-name ] [inject] | destination-swid swid destination-mac dmac [ vlan vlan-val ] [ count count-val ] [ interface interface-name ] } [ interval interval ] [ timeout timeout ] [ cos cos-val ] [details] [ __readonly__ TABLE_req_no req-no packet-lost TABLE_pong_time hop-no pong-switch-mac pong-residence-time-sec pong-residence-time-nsec last-hop rtt-sec rtt-nsec used-vlan total-count success-count min-rtt max-rtt avg-rtt ]

Syntax Description

pong

PONG - Precision Time Protocol(IEEE 1588) based debuging tool
source

source mac EEEE.EEEE.EEEE (default is system-mac)
destination

destination mac
destination-swid

destination-switchid
destination-mac

destination-mac
count

number of packets to send (default is 5)
vlan

vlan (default is 1)
interface

Interface
cos

IEEE 802.1Q class of service
inject

inject
vlan-val

Type: integer

min: 1  max: 4094  

vlan
cos-val

Type: uinteger

min: 0  max: 7  

802.1Q Class of Service value
dmac

Type: ethernet

Mac address
swid

Type: integer

min: 1  max: 4094  

Destination switch-id
smac

Type: ethernet

Mac address
count-val

Type: integer

min: 1  max: 1000  

number of packets to send
rtt-sec

Type: uinteger

Round trip time Sec
rtt-nsec

Type: uinteger

Round trip time nsec
last-hop

Type: uinteger

if it is last hop
interface-name

Type: interface

Interface name
__readonly__

Read Only
packet-lost

Type: string

packet lost message
TABLE_req_no

pong for request number
req-no

Type: integer

Req number
TABLE_pong_time

pong residence time table
hop-no

Type: integer

Hop number
interval

interval
interval

Type: integer

min: 1  max: 5  

interval
timeout

timeout (should be greater that interval)
timeout

Type: integer

min: 2  max: 10  

timeout
details

details - displays alL timestamps instead of residence times
pong-switch-mac

Type: string

switch-mac
pong-residence-time-sec

Type: uinteger

residence time in sec
pong-residence-time-nsec

Type: uinteger

residence time in nsec
used-vlan

Type: integer

used vlan
total-count

Type: integer

total count
success-count

Type: integer

successful pong
min-rtt

Type: integer

minimum round trip time
max-rtt

Type: integer

maximum round trip time
avg-rtt

Type: integer

average round trip time

Command Modes

  • /exec/

pop

pop [name]

Syntax Description

pop

pop mode from stack or restore from name
name

Type: string

name

Command Modes

  • /global

port-channel hash-distribution

port-channel hash-distribution type | no port-channel hash-distribution [type]

Syntax Description

no

Negate a command or set its defaults
port-channel

Configure port channel parameters
hash-distribution

Configure port-channel hash-distribution Not available in this release.
type

adaptive/fixed (default adaptive)

adaptive  value: 1
port-channel hash-distribution type is adaptive
fixed  value: 2
port-channel hash-distribution type is fixed

Command Modes

  • /exec/configure/

port-channel limit

port-channel limit | no port-channel limit

Syntax Description

no

Negate a command or set its defaults
port-channel

Configure the maximum number of supported vPCs
limit

limit to 244 vPCs

Command Modes

  • /exec/configure/vpc-domain

port-channel load-balance

port-channel load-balance bndl_hash bndl_sel [ rotate rotate ] [concatenation] [ module module | fex { fex-range | all } ] | no port-channel load-balance [ bndl_hash bndl_sel [ rotate rotate ] [concatenation] [ module module | fex { fex-range | all } ] ]

Syntax Description

no

Negate a command or set its defaults
port-channel

Configure port channel parameters
load-balance

Configure port-channel load balance
bndl_hash

bundle hash

dst  value: 1
destination based parameters
src  value: 2
source based parameters
src-dst  value: 3
source-destination based parameters
bndl_sel

bundle select

mac  value: 0
MAC
ip  value: 1
IP
l4port  value: 2
L4 port
ip-l4port  value: 3
IP and L4 port
ip-vlan  value: 4
IP and VLAN
ip-l4port-vlan  value: 5
IP, L4 port and VLAN
rotate

offset the hash-input
rotate

Type: integer

min: 1  max: 63  

offset the hash-input
concatenation

enable/disable concatenation
module

Specify a module number Not available in this release.
module

Type: integer

Specify a module number
fex

FEX devices Not available in this release.
fex-range

Type: integer

min: 100  max: 199  

FEX device range
all

Permit all FEX to configure port-channel LB

Command Modes

  • /exec/configure

port-channel load-balance ethernet

port-channel load-balance ethernet algorithm [ module module ] | no port-channel load-balance ethernet [ algorithm [ module module ] ]

Syntax Description

no

Negate a command or set its defaults
port-channel

Configure port channel parameters
load-balance

Configure port-channel load balance
ethernet

Ethernet port-channel
module

Specify a module number
module

Type: integer

Specify a module number
algorithm

Configure port-channel load balance

destination-mac  value: 1
Destination MAC address
source-mac  value: 2
Source MAC address
source-dest-mac  value: 3
Source & Destination MAC address
destination-ip-vlan  value: 4
Destination IP address and VLAN
destination-ip-gre  value: 17
Destination IP GRE key
source-ip-vlan  value: 5
Source IP address and VLAN
source-ip-gre  value: 16
Source IP GRE key
source-dest-ip-vlan  value: 6
Source & Destination IP address and VLAN
destination-port  value: 7
Destination L4 port
source-port  value: 8
Source L4 port
source-dest-port  value: 9
Source & Destination L4 port
dest-ip-port  value: 10
Destination IP address and L4 port
source-ip-port  value: 11
Source IP address and L4 port
source-dest-ip-port  value: 12
Source & Destination IP address and L4 port
dest-ip-port-vlan  value: 13
Destination IP address, L4 port and VLAN
source-ip-port-vlan  value: 14
Source IP address, L4 port and VLAN
source-dest-ip-port-vlan  value: 15
Source & Destination IP address, L4 port and VLAN
source-dest-ip-gre  value: 18
Source & Destination IP GRE key

Command Modes

  • /exec/configure

port-channel load-balance hash-modulo-f2

[no] port-channel load-balance hash-modulo-f2

Syntax Description

no

Negate a command or set its defaults
port-channel

Configure port channel parameters
load-balance

Configure port-channel load balance
hash-modulo-f2

Enable/disable modulo hash for N7K-F248XP cards Not available in this release.

Command Modes

  • /exec/configure

port-channel load-balance hash enable

[no] port-channel load-balance hash enable

Syntax Description

no

Negate a command or set its defaults
port-channel

Configure port channel parameters
load-balance

Configure port-channel load balance
hash

hash enhancement
enable

enable

Command Modes

  • /exec/configure

port-channel load-balance resilient

port-channel load-balance resilient | no port-channel load-balance resilient

Syntax Description

no

Negate a command or set its defaults
port-channel

Configure port channel parameters
load-balance

Configure port-channel load balance
resilient

Configure port-channel load balance resilient mode

Command Modes

  • /exec/configure

port-channel load-defer

port-channel load-defer load-defer-timeout | no port-channel load-defer [load-defer-timeout]

Syntax Description

no

Negate a command or set its defaults
port-channel

Configure port channel parameters
load-defer

Load defer time interval Not available in this release.
load-defer-timeout

Type: integer

min: 1  max: 1800  

Load defer time interval in seconds (default 120 seconds)

Command Modes

  • /exec/configure/

port-channel min-links

port-channel min-links min-links-number | no port-channel min-links [min-links-number]

Syntax Description

no

Negate a command or set its defaults
port-channel

Configure port channel parameters
min-links

Configure the port-channel min-links
min-links-number

Type: integer

min: 1  max: 16  

Enter the min-link number

Command Modes

  • /exec/configure/if-eth-port-channel-switch
  • /exec/configure/if-eth-port-channel
  • /exec/configure/if-eth-port-channel-p2p

port-channel port hash-distribution

port-channel port hash-distribution type | no port-channel port hash-distribution [type]

Syntax Description

no

Negate a command or set its defaults
port-channel

Configure port channel parameters
port

Configure port-channel port hash-distribution
hash-distribution

Configure port-channel port hash-distribution
type

adaptive/fixed (default adaptive)

adaptive  value: 1
port-channel port hash-distribution type is adaptive
fixed  value: 2
port-channel port hash-distribution type is fixed

Command Modes

  • /exec/configure/if-eth-port-channel-switch
  • /exec/configure/if-eth-port-channel
  • /exec/configure/if-eth-port-channel-p2p

port-channel port load-defer

port-channel port load-defer | no port-channel port load-defer

Syntax Description

no

Negate a command or set its defaults
port-channel

Configure port channel parameters
port

Configure port-channel load-defer for member ports
load-defer

Configure port-channel load-defer

Command Modes

  • /exec/configure/if-eth-port-channel-switch
  • /exec/configure/if-eth-port-channel
  • /exec/configure/if-eth-port-channel-p2p

port-security stop learning

[no] port-security stop learning

Syntax Description

no

Negate a command or set its defaults
port-security

Port security related command

stop

stop
learning

learning

Command Modes

  • /exec

(aclmgr)

{ [seqno] | no } { _port_op port0_num | _port_range port1_num port2_num }

Syntax Description

seqno

Type: uinteger

min: 1  max: 4294967295  

Sequence number
no

Negate a command or set its defaults
_port_op

Port operator

lt  value: 4
Match only packets with a lower port number
gt  value: 5
Match only packets with a greater port number
eq  value: 6
Match only packets on a given port number
neq  value: 7
Match only packets not on a given port number
_port_range

Port range

range  value: 8
Match only packets in the range of port numbers
port0_num

Type: integer

min: 0  max: 65535  

Port number
port1_num

Type: integer

min: 0  max: 65535  

Port number
port2_num

Type: integer

min: 0  max: 65535  

Port number

Command Modes

  • /exec/configure/portgroup

power efficient-ethernet auto

[no] power efficient-ethernet auto

Syntax Description

no

Negate a command or set its defaults
power

Configure EEE for the port
efficient-ethernet

Configure Energy Efficient Ethernet (EEE)
auto

Auto negotiate EEE

Command Modes

  • /exec/configure/if-ethernet-all
  • /exec/configure/if-eth-base

power efficient-ethernet sleep threshold aggressive

[no] power efficient-ethernet sleep threshold aggressive

Syntax Description

no

Negate a command or set its defaults
power

Configure EEE for the port
efficient-ethernet

Configure Energy Efficient Ethernet (EEE)
sleep

EEE LPI sleep configuration
threshold

EEE LPI sleep threshold
aggressive

Enable/ Disable EEE LPI aggressive sleep mode

Command Modes

  • /exec/configure/if-ethernet-all
  • /exec/configure/if-eth-base

power redundancy-mode combined

[no] power redundancy-mode combined

Syntax Description

no

Negate a command or set its defaults
power

Configure power supply
redundancy-mode

Configure power supply redundancy mode
combined

Configure power supply redundancy mode as combined

Command Modes

  • /exec/configure

power redundancy-mode combined force

[no] power redundancy-mode combined force

Syntax Description

no

Negate a command or set its defaults
power

Configure power supply
redundancy-mode

Configure power supply redundancy mode
combined

Configure power supply redundancy mode as combined
force

Force combined mode without prompting

Command Modes

  • /exec/configure

power redundancy-mode insrc-redundant

[no] power redundancy-mode insrc-redundant

Syntax Description

no

Negate a command or set its defaults
power

Configure power supply
redundancy-mode

Configure power supply redundancy mode
insrc-redundant

Configure power supply redundancy mode as grid/AC input source redundant

Command Modes

  • /exec/configure

power redundancy-mode ps-redundant

[no] power redundancy-mode ps-redundant

Syntax Description

no

Negate a command or set its defaults
power

Configure power supply
redundancy-mode

Configure power supply redundancy mode
ps-redundant

Configure power supply redundancy mode as PS redundant

Command Modes

  • /exec/configure

poweroff

[no] poweroff { module module | s0 santa-cruz-range }

Syntax Description

no

Negate a command or set its defaults
poweroff

Power off a module in the switch Available only in the 9500 series.
module

enter a module number
module

Type: integer

please enter the module number
s0

Type: xbar-str

Power off a specific xbar
santa-cruz-range

Type: integer

please enter the xbar number

Command Modes

  • /exec/configure

pps (ospf)

pps pps burst | no pps [pps] [burst]

Syntax Description

no

Negate a command or set its defaults
pps

OSPF packets per second
pps

Type: integer

min: 0  max: 25000  

Packets per second value
burst

Type: integer

min: 50  max: 5000  

Burst value

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

pps (ospfv3)

pps pps burst | no pps [pps] [burst]

Syntax Description

no

Negate a command or set its defaults
pps

OSPFv3 packets per second
pps

Type: integer

min: 0  max: 25000  

Packets per second value
burst

Type: integer

min: 50  max: 5000  

Burst value

Command Modes

  • /exec/configure/router-ospf3
  • /exec/configure/router-ospf3/vrf

preempt (glbp)

[no] preempt [ delay minimum min-delay ]

Syntax Description

no

Negate a command or set its defaults
preempt

Overthrow lower priority designated routers
delay

Wait before preempting
minimum

Delay atleast this long
min-delay

Type: integer

min: 0  max: 3600  

Number of seconds for minimum delay

Command Modes

  • /exec/configure/if-eth-any/glbp

preempt (vrrp_mgr)

[no] preempt

Syntax Description

no

Negate a command or set its defaults
preempt

Enable preemption of lower priority master

Command Modes

  • /exec/configure/if-eth-any/vrrp

preempt delay minimum reload

preempt delay minimum min-delay reload rel-delay sync sync-delay | preempt delay reload rel-delay minimum min-delay sync sync-delay | preempt delay sync sync-delay minimum min-delay reload rel-delay | preempt delay reload rel-delay sync sync-delay minimum min-delay | preempt delay sync sync-delay reload rel-delay minimum min-delay | preempt delay minimum min-delay sync sync-delay reload rel-delay | preempt delay reload rel-delay sync sync-delay | preempt delay sync sync-delay reload rel-delay | preempt delay minimum min-delay sync sync-delay | preempt delay sync sync-delay minimum min-delay | preempt delay minimum min-delay reload rel-delay | preempt delay reload rel-delay minimum min-delay | preempt delay minimum min-delay | preempt delay reload rel-delay | preempt delay sync sync-delay | preempt | no preempt | no preempt delay [ minimum [min-delay] [ [ reload [rel-delay] ] [ sync [sync-delay] ] | [ sync [sync-delay] ] [ reload [rel-delay] ] ] | reload [rel-delay] [ [ minimum [min-delay] ] [ sync [sync-delay] ] | [ sync [sync-delay] ] [ minimum [min-delay] ] ] | sync [sync-delay] [ [ reload [rel-delay] ] [ minimum [min-delay] ] | [ minimum [min-delay] ] [ reload [rel-delay] ] ] ]

Syntax Description

no

Negate a command or set its defaults
preempt

Overthrow lower priority Active routers
delay

Wait before preempting
minimum

Delay at least this long
min-delay

Type: integer

min: 0  max: 3600  

Number of seconds for minimum delay
reload

Delay after reload
rel-delay

Type: integer

min: 0  max: 3600  

Number of seconds for reload delay
sync

Wait for IP redundancy clients
sync-delay

Type: integer

min: 0  max: 3600  

Number of seconds for sync delay

Command Modes

  • /exec/configure/if-eth-any/hsrp_ipv4
  • /exec/configure/if-eth-any/hsrp_ipv6

priority-flow-control mode

[no] priority-flow-control mode { auto | on | off } [force]

Syntax Description

no

Negate a command or set its defaults
priority-flow-control

Enable/Disable PFC
mode

PFC Mode
auto

Set Auto Mode
on

Force PFC to On
off

Force PFC to Off
force

Force apply PFC config

Command Modes

  • /exec/configure/if-switching
  • /exec/configure/if-routing
  • /exec/configure/if-ethernet-m

priority (glbp)

priority pri-value | no priority

Syntax Description

no

Negate a command or set its defaults
priority

Priority level
pri-value

Type: integer

min: 1  max: 255  

Priority Value

Command Modes

  • /exec/configure/if-eth-any/glbp

priority (hsrp_engine)

priority priority [ forwarding-threshold lower lower-value upper upper-value ] | no priority [forwarding-threshold]

Syntax Description

no

Negate a command or set its defaults
priority

Priority level
priority

Type: integer

min: 0  max: 255  

Priority value
forwarding-threshold

Set forwarding threshold
lower

Set lower threshold value
lower-value

Type: integer

min: 0  max: 255  

Lower threshold value
upper

Set upper threshold value
upper-value

Type: integer

min: 0  max: 255  

Upper threshold value

Command Modes

  • /exec/configure/if-eth-any/hsrp_ipv4
  • /exec/configure/if-eth-any/hsrp_ipv6

priority (qosmgr)

[no] priority [ level value ]

Syntax Description

no

Negate a command or set its defaults
priority

Configure traffic class priority
level

Specify level of priority
value

Type: uinteger

min: 1  max: 4  

Value of level, lower the number higher the priority

Command Modes

  • /exec/configure/policy-map/type/queuing/class

priority (vrrp_mgr)

priority priority_value [ forwarding-threshold lower lower-value upper upper-value ] | no priority [forwarding-threshold]

Syntax Description

no

Negate a command or set its defaults
priority

Configure the vr priority
priority_value

Type: integer

min: 1  max: 254  

Configure the vr priority
forwarding-threshold

Set forwarding threshold
lower

Set lower threshold value
lower-value

Type: integer

min: 1  max: 254  

Lower threshold value
upper

Set upper threshold value
upper-value

Type: integer

min: 1  max: 254  

Upper threshold value

Command Modes

  • /exec/configure/if-eth-any/vrrp

private-vlan

[no] private-vlan pvlan-type

Syntax Description

no

Negate a command or set its defaults
private-vlan

Configure a private VLAN
pvlan-type
isolated  value: 1
Configure the VLAN as isolated private VLAN
community  value: 2
Configure the VLAN as community private VLAN
primary  value: 3
Configure the VLAN as primary private VLAN

Command Modes

  • /exec/configure/vlan

private-vlan association add remove

private-vlan association [ add | remove ] secondary_vlans | no private-vlan association [secondary_vlans]

Syntax Description

private-vlan

Configure a private VLAN
association

Configure association between private VLANs
add

Add a VLAN to private VLAN list
remove

Remove a VLAN from private VLAN list
no

Negate a command or set its defaults
secondary_vlans

Type: vlan-mrange

VLAN IDs of the private VLANs to be configured

Command Modes

  • /exec/configure/vlan

private-vlan mapping add remove

private-vlan mapping [ add | remove ] secondary_vlans | no private-vlan mapping [secondary_vlans]

Syntax Description

private-vlan

Configure a private VLAN
mapping

Set the private VLAN interface mapping
add

Add a VLAN to private VLAN list
remove

Remove a VLAN from private VLAN list
no

Negate a command or set its defaults
secondary_vlans

Type: vlan-mrange

Secondary VLAN IDs of the private VLAN interface mapping

Command Modes

  • /exec/configure/if-vlan

private-vlan release resource

private-vlan release resource { [ vlan vlan-id ] | global }

Syntax Description

private-vlan

Show information about private VLAN

release

release
resource

resource
vlan

VLAN status
global

global rid
vlan-id

Type: vlan-mrange

VLAN IDs of the private VLANs to be configured

Command Modes

  • /exec

private-vlan synchronize

private-vlan synchronize

Syntax Description

private-vlan

Set private-vlan synchronization
synchronize

Synchronize vlans

Command Modes

  • /exec/configure/spanning-tree/mst/configuration

promiscuous-mode

promiscuous-mode { off | on } | no promiscuous-mode [ off | on ]

Syntax Description

no

Negate a command or set its defaults
promiscuous-mode

Configure promiscuous mode for the port
off

Disable promiscuous mode
on

Enable promiscuous mode

Command Modes

  • /exec/configure/if-port-channel
  • /exec/configure/if-ethernet-all
  • /exec/configure/if-eth-base

protocol-down

protocol-down

Syntax Description

protocol-down

Mark protocol state down

Command Modes

  • /exec/configure/if-overlay
  • /exec/configure/if-te

protocol-reinit

protocol-reinit

Syntax Description

protocol-reinit

Reinitialize the interface

Command Modes

  • /exec/configure/if-overlay
  • /exec/configure/if-te

protocol-up

protocol-up

Syntax Description

protocol-up

Mark protocol state up

Command Modes

  • /exec/configure/if-overlay
  • /exec/configure/if-te

protocol shutdown (ospf)

[no] protocol shutdown

Syntax Description

no

Negate a command or set its defaults
protocol

OSPF protocol
shutdown

Shutdown the OSPF protocol instance

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

protocol shutdown (ospfv3)

[no] protocol shutdown

Syntax Description

no

Negate a command or set its defaults
protocol

OSPF protocol
shutdown

shutdown the OSPF protocol instance

Command Modes

  • /exec/configure/router-ospf3
  • /exec/configure/router-ospf3/vrf

publish-event sub-system type

publish-event sub-system sub-system-id type event-type [ arg1 data1 ] [ arg2 data2 ] [ arg3 data3 ] [ arg4 data4 ]

Syntax Description

publish-event

Publish an application specific event
sub-system

Sub-system ID to which the application event belongs
sub-system-id

Type: uinteger

Sub-system ID value
type

Event type value
event-type

Type: uinteger

Event type value
arg1

User specified data to be passed when the event is published
data1

Type: string

User specified data value
arg2

User specified data to be passed when the event is published
data2

Type: string

User specified data value
arg3

User specified data to be passed when the event is published
data3

Type: string

User specified data value
arg4

User specified data to be passed when the event is published
data4

Type: string

User specified data value

Command Modes

  • /exec

purge ip route

purge ip route [ vrf { vrf-name | vrf-known-name | vrf-all } ] all

Syntax Description

purge

Purge
ip

IPv4
route

Purge routing information
vrf

VRF
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name
<vrf-all>

Display information for all VRFs
<all>

Purge all routes

Command Modes

  • /exec

purge ipv6 route

purge ipv6 route [ vrf { vrf-name | vrf-known-name | vrf-all } ] all

Syntax Description

purge

Purge
ipv6

IPv6
route

Purge routing information
vrf

VRF
vrf-name

Type: vrf

pattern: [-a-zA-Z0-9_:;$#@]*

antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive

length: 32

VRF name
vrf-known-name

Type: vrf

Known VRF name
<vrf-all>

Display information for all VRFs
<all>

Purge all routes

Command Modes

  • /exec

purge module running-config

purge module module running-config

Syntax Description

purge

Deletes unused data Available only in the 9500 series.
module

Purge configuration for non-existent modules
module

Type: integer

Enter module number
running-config

purge running configuration for non-existent modules

Command Modes

  • /exec

push

push [name]

Syntax Description

push

push current mode to stack or save it under name
name

Type: string

name

Command Modes

  • /global

pwd

pwd

Syntax Description

pwd

View current directory

Command Modes

  • /exec

python

python [ uri [pyargs] + ]

Syntax Description

python

run a python command/script, or enter python mode (if no arg)
uri

Type: uri

path to a python file
pyargs

Type: string

python command line arguments (maximum 32)

Command Modes

  • /exec