The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
[no] icmpv6 cache disable
| no |
Negate a command or set its defaults |
| icmpv6 |
ICMPv6 Commands |
| cache |
Disable cache |
| disable |
Disable cache |
icmpv6 cfs-queue size | no icmpv6 cfs-queue
| no |
Negate a command or set its defaults |
| icmpv6 |
ICMPv6 Commands |
| cfs-queue |
cfs-queue |
| size |
Type: integer Size for adjacencies to be sent in CFSoE payload |
icmpv6 library mts-queue size | no icmpv6 library mts-queue
| no |
Negate a command or set its defaults |
| icmpv6 |
ICMPv6 Commands |
| library |
library data queue |
| mts-queue |
mts-queue |
| size |
Type: integer Size for icmpv6 data sap qlimit |
icmpv6 mts-queue size | no icmpv6 mts-queue
| no |
Negate a command or set its defaults |
| icmpv6 |
ICMPv6 Commands |
| mts-queue |
mts-queue |
| size |
Type: integer Size for icmpv6 data sap qlimit |
[no] import map rmap-name
| no |
Negate a command or set its defaults |
| import |
VRF import |
| map |
Route-map based VRF import |
| rmap-name |
Type: string pattern: [!-~]* length: 63 Route-map name |
import vrf default [prefix-limit] map rmap-name | no import vrf default [prefix-limit] map rmap-name
| no |
Negate a command or set its defaults |
| import |
VRF import |
| vrf |
Virtual Router Context |
| default |
VRF name (default) |
| prefix-limit |
Type: uinteger min: 1 max: 2147483647 default: 1000 Maximum prefix limit |
| map |
Route-map based VRF import |
| rmap-name |
Type: string pattern: [!-~]* length: 63 Route-map name |
[no] in-order-guarantee
| no |
Negate a command or set its defaults |
| in-order-guarantee |
Enable IOD |
[no] inherit peer peer-template-name
| no |
Negate a command or set its defaults |
| inherit |
Inherit a template |
| peer |
Inherit a peer template |
| peer-template-name |
Type: string length: 80 Peer template name |
[no] inherit peer-policy peer-policy-template-name policy-preference
| no |
Negate a command or set its defaults |
| inherit |
Inherit a template |
| peer-policy |
Inherit a peer-policy template |
| peer-policy-template-name |
Type: string length: 80 Template name |
| policy-preference |
Type: integer min: 1 max: 65535 Sequence number |
[no] inherit peer-session peer-session-template-name
| no |
Negate a command or set its defaults |
| inherit |
Inherit a template |
| peer-session |
Inherit a peer-session template |
| peer-session-template-name |
Type: string length: 80 Template name |
[no] inject-map inject-map-name exist-map exist-map-name [copy-attributes]
| no |
Negate a command or set its defaults |
| inject-map |
Routemap which specifies prefixes to inject |
| inject-map-name |
Type: string pattern: [!-~]* length: 63 Route-map name |
| exist-map |
Routemap which specifies exist condition |
| exist-map-name |
Type: string pattern: [!-~]* length: 63 Route-map name |
| copy-attributes |
Copy attributes from aggregate |
install { all [ nxos uri | parallel ] + | force-all [ nxos uri | parallel ] + }
| install |
upgrade software |
| all |
Upgrade the system |
| nxos |
boot-variable name |
| uri |
Type: uri Enter image uri |
| parallel |
Parallel upgrade linecards in the system |
| force-all |
Force upgrade the system |
install activate { e-patch | patch } [forced]
| install |
Install package |
| activate |
Activate package |
| e-patch |
Type: userdef Package Name |
| patch |
Type: string Package Name |
| forced |
No confirmation prompt in case of ISSU patch |
install add uri1 [activate]
| install |
Install package |
| add |
Add package |
| uri1 |
Type: uri Enter package uri |
| activate |
Activate package |
install commit [ e-patch | patch ]
| install |
Install package |
| commit |
Commit software patch |
| e-patch |
Type: userdef Package Name |
| patch |
Type: string Package Name |
install deactivate { e-patch | patch }
| install |
Install package |
| deactivate |
Deactivate package |
| e-patch |
Type: userdef Package Name |
| patch |
Type: string Package Name |
install epld uri1 module all [force]
| install |
upgrade software |
| epld |
Install EPLD from EPLD image |
| uri1 |
Type: uri Local URI containing EPLD Image |
| module |
Upgrade the modules |
| all |
Install all the modules |
| force |
Force Install EPLD from EPLD image |
install epld uri1 module module { primary | golden } [force]
| install |
upgrade software |
| epld |
Install EPLD from EPLD image |
| uri1 |
Type: uri Local URI containing EPLD Image |
| module |
Upgrade the modules Available only in the 9500 series. |
| module |
Type: integer-range Enter the module number to be upgraded |
| primary |
Upgrade primary fpga image |
| golden |
Upgrade golden fpga image |
| force |
Force Install EPLD from EPLD image |
install epld uri1 module all { primary | golden } [force]
| install |
upgrade software |
| epld |
Install EPLD from EPLD image |
| uri1 |
Type: uri Local URI containing EPLD Image |
| module |
Upgrade the modules |
| all |
Install all the modules |
| primary |
Upgrade primary fpga image |
| golden |
Upgrade golden fpga image |
| force |
Force Install EPLD from EPLD image |
install epld uri1 module module [force]
| install |
upgrade software |
| epld |
Install EPLD from EPLD image |
| uri1 |
Type: uri Local URI containing EPLD Image |
| module |
Upgrade the modules Available only in the 9500 series. |
| module |
Type: integer-range Enter the module number to be upgraded |
| force |
Force Install EPLD from EPLD image |
[no] install feature-set fex
| no |
Negate a command or set its defaults |
| install |
install a feature-set |
| feature-set |
install feature-set |
| fex |
FEX |
install license uri0 [s0]
| install |
upgrade software |
| license |
install license |
| uri0 |
Type: uri Specify URL for license file |
| s0 |
Type: string length: 32 Specify a target name for the license file |
install module module { bios [ [ system uri0 ] [forced2] ] | bios [ primary | golden ] [forced] | image [ forced1 | system1 uri1 ] }
| install |
upgrade software |
| module |
Upgrade for module |
| module |
Type: integer Enter module index |
| bios |
Upgrade module bios |
| system |
System Image |
| uri0 |
Type: uri Local URI containing the system Image |
| forced2 |
Force install bios |
| primary |
Upgrade the Primary bios |
| golden |
Upgrade the Golden bios |
| forced |
Force install bios |
| image |
Upgrade module image |
| forced1 |
Bypass SRG check |
| system1 |
System Image |
| uri1 |
Type: uri Local URI containing the system Image |
| kickstart |
kickstart image |
| uri2 |
Type: uri Local URI containing the master kickstart Image |
| ssi |
Upgrade SSM/MSM/SSN module |
| uri4 |
Type: uri Local URI containing the ssi image |
install remove { e-patch | patch | inactive } [forced]
| install |
Install package |
| remove |
Remove package |
| e-patch |
Type: userdef Package Name |
| patch |
Type: string Package Name |
| inactive |
All inactive except non-committed packages |
| forced |
Remove package |
instance instance-id vlan vlan-list
| instance |
Map vlans to an MST instance |
| instance-id |
Type: uinteger min: 0 max: 4094 MST instance id |
| vlan |
Range of vlans to add to the instance mapping |
| vlan-list |
Type: vlan-mrange vlan range ex: 1-65, 72, 200 - 300 |
interface interface
| interface |
Configure interfaces |
| interface |
Type: interface-mrange Interface Name |
interface-vlan reset credits [count]
| interface-vlan |
Vlan Interface |
| reset |
Reset SVI Credits |
| credits |
SVI Credits |
| count |
Type: uinteger Set SVI Credit Count |
interface-vlan vlan-id reset fsm
| interface-vlan |
Vlan Interface |
| vlan-id |
Type: uinteger VLAN Id |
| reset |
Reset SVI Credits |
| fsm |
SVI FSM |
[no] interface breakout module module
| no |
Negate a command or set its defaults |
| interface |
Configure interfaces |
| breakout |
Configuring the breakout for a module |
| module |
High Bandwidth Module |
| module |
Type: integer High Bandwidth Module number |
[no] interface breakout slot module
| no |
Negate a command or set its defaults |
| interface |
Configure interfaces |
| breakout |
Configuring the breakout for a module |
| slot |
High Bandwidth Module |
| module |
Type: integer High Bandwidth Module number |
[no] interface policy deny
| no |
Negate a command or set its defaults |
| interface |
Configure the interface policy for this role |
| policy |
Configure the interface policy for this role |
| deny |
Deny access to a interface unless specifically permitted |
ip { ipv6address | autoconfig } | no ip [ ipv6address | autoconfig ]
| no |
Negate a command or set its defaults |
| ip |
Enable HSRP IPv6 and set the virtual IP address |
| ipv6address |
Type: ipv6addr Virtual IPV6 address |
| autoconfig |
Obtain address using autoconfiguration |
[no] ip [ ipaddress [secondary] ]
| no |
Negate a command or set its defaults |
| ip |
Set Virtual IP address |
| ipaddress |
Type: ipaddr Virtual IP address |
| secondary |
Make this a secondary IP address |
ip [ ipaddress [secondary] ] | no ip [ ipaddress [secondary] ]
| no |
Negate a command or set its defaults |
| ip |
Enable HSRP IPv4 and set the virtual IP address |
| ipaddress |
Type: ipaddr Virtual IP address |
| secondary |
Make this IP address a secondary virtual IP address |
[no] ip access-class name inout
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| access-class |
Specify IPv4 access control for packets |
| name |
Type: string length: 64 List name |
| inout |
Traffic direction
|
[no] ip access-group name inout
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| access-group |
Specify access control for packets |
| name |
Type: string length: 64 List name |
| inout |
Traffic direction
|
[no] ip access-list name
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| access-list |
Configure access list |
| name |
Type: string length: 64 List name |
[no] ip adjacency cache disable
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| adjacency |
Configure Adjmgr |
| cache |
Disable cache |
| disable |
Disable cache |
ip adjacency [ vrf { vrf-name | vrf-known-name } ] { interface { * | ip-addr } | * } forcedownload
| ip |
Configure IP features |
| adjacency |
Configure Adjmgr |
| vrf |
Display per-VRF information |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name |
Type: vrf Known VRF name |
| interface |
Type: interface Display specific interface adjacencies only |
| ip-addr |
Type: ipaddr IPV4 source address |
| * |
for all adjacencies in this context |
| forcedownload |
Create consistancy in UFDM |
ip adjacency notify interval time | no ip adjacency notify interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| adjacency |
Configure Adjmgr |
| notify |
Notify URIB/FIB |
| interval |
Time interval |
| time |
Type: integer min: 100 max: 1000 default: 100 value in milli seconds |
[no] ip adjacency [ vrf { vrf-name | vrf-known-name } ] { interface { * | ip-addr } | * } peer-gmac
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| adjacency |
Configure Adjmgr |
| vrf |
Display per-VRF information |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name |
Type: vrf Known VRF name |
| interface |
Type: interface Display specific interface adjacencies only |
| ip-addr |
Type: ipaddr IPV4 source address |
| * |
for all adjacencies in this context |
| peer-gmac |
Set/clear the peer-gmac bit |
ip adjacency route distance pref | no ip adjacency route distance
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| adjacency |
Configure Adjmgr |
| route |
route |
| distance |
admin-distance |
| pref |
Type: uinteger min: 2 max: 250 default: 250 preference |
ip adjacency statistics collect | no ip adjacency statistics collect
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| adjacency |
Configure Adjmgr |
| statistics |
Statistics |
| collect |
Collection |
ip adjacency statistics interval time | no ip adjacency statistics interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| adjacency |
Configure Adjmgr |
| statistics |
Statistics |
| interval |
Interval |
| time |
Type: integer min: 120 max: 2400 default: 120 Timer timeout value |
[no] ip allow address-overlap
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| allow |
Allow interface IP address overlap |
| address-overlap |
Allow interface IP address overlap |
ip arp ip-address mac-address | no ip arp ip-address [mac-address]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
Configure ARP parameters |
| ip-address |
Type: ipaddr IP address |
| mac-address |
Type: ethernet MAC address |
ip arp broadcast mac-mismatch | no ip arp broadcast mac-mismatch
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
Configure ARP parameters |
| broadcast |
Enable/disable arp broadcasr |
| mac-mismatch |
when there is a smac mismatch |
[no] ip arp cache disable
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
ARP |
| cache |
Disable cache |
| disable |
Disable cache |
ip arp cfs-queue size | no ip arp cfs-queue
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
ARP |
| cfs-queue |
cfs-queue |
| size |
Type: integer Size for adjacencies to be sent in CFSoE payload |
isis authentication-type { cleartext | md5 } level | no isis authentication-type [ cleartext | md5 ] level
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| authentication-type |
Set hello authentication type |
| cleartext |
Cleartext |
| md5 |
HMAC-MD5 |
| level |
IS-IS level
|
isis authentication-type { cleartext | md5 } | no isis authentication-type [ cleartext | md5 ]
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| authentication-type |
Set hello authentication type |
| cleartext |
Cleartext |
| md5 |
HMAC-MD5 |
isis authentication key-chain auth-keychain level | no isis authentication key-chain [auth-keychain] level
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| authentication |
Set hello authentication keychain |
| key-chain |
Set hello authentication keychain |
| auth-keychain |
Type: string length: 63 authentication keychain |
| level |
IS-IS level
|
isis authentication key-chain auth-keychain | no isis authentication key-chain [auth-keychain]
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| authentication |
Set hello authentication keychain |
| key-chain |
Set hello authentication keychain |
| auth-keychain |
Type: string length: 63 authentication keychain |
[no] isis bfd [disable]
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| bfd |
Interface BFD configuration |
| disable |
Disable BFD on interface |
isis circuit-type circuit-type | no isis circuit-type [circuit-type]
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| circuit-type |
Configure circuit type for interface |
| circuit-type |
IS-IS circuit type
|
[no] isis csnp-interval sec { level-1 | level-2 }
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| csnp-interval |
Set CSNP interval in seconds |
| sec |
Type: integer min: 1 max: 65535 default: 10 CSNP interval value |
| level-1 |
Specify interval for level-1 CSNPs |
| level-2 |
Specify interval for level-2 CSNPs |
[no] isis event-history adjacency size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| adjacency |
Adjacency events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history cli size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| cli |
CLI events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: large
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history csnp size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| csnp |
CSNP events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history dis size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| dis |
Dis events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history events size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| events |
Events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: large
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history graceful size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| graceful |
Graceful Restart events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history ha size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| ha |
HA events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history iih size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| iih |
IIH events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: large
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history lsp-flood size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| lsp-flood |
LSP-flood events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history lsp-gen size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| lsp-gen |
LSP-Gen events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history mtr size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| mtr |
MTR events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history psnp size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| psnp |
PSNP events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history redist size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| redist |
Redist events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history spf-leaf size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| spf-leaf |
Shortest path first events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history spf-tree size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| spf-tree |
SPF-Tree events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history tlv size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| tlv |
TLV events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis event-history urib size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| isis |
Event-history buffers for IS-IS |
| event-history |
Configure event-history buffers |
| urib |
URIB events for IS-IS |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] isis hello-interval sec { level-1 | level-2 }
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| hello-interval |
Set Hello interval in seconds |
| sec |
Type: integer min: 1 max: 65535 default: 10 Hello interval value |
| level-1 |
Specify hello-interval for level-1 IIHs |
| level-2 |
Specify hello-interval for level-2 IIHs |
[no] isis hello-interval sec
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| hello-interval |
Set Hello interval in seconds |
| sec |
Type: integer min: 1 max: 65535 default: 10 Hello interval value |
[no] isis hello-multiplier multi { level-1 | level-2 }
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| hello-multiplier |
Set multiplier for Hello holding time |
| multi |
Type: integer min: 3 max: 1000 default: 3 Hello multiplier value |
| level-1 |
Specify hello multiplier for level-1 IIHs |
| level-2 |
Specify hello multiplier for level-2 IIHs |
[no] isis hello-multiplier multi
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| hello-multiplier |
Set multiplier for Hello holding time |
| multi |
Type: integer min: 3 max: 1000 default: 3 Hello multiplier value |
isis hello-padding always
| isis |
IS-IS configuration commands |
| hello-padding |
Pad IS-IS hello PDUs to full MTU |
| always |
Pad every hello |
isis hello-padding | no isis hello-padding [always]
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| hello-padding |
Pad IS-IS hello PDUs to full MTU |
| always |
Pad every hello |
[no] isis ipv6 metric metric level
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| metric |
Configure metric for IPV6 topology |
| ipv6 |
Configure metric for IPV6 topology |
| metric |
Type: integer min: 0 max: 0 Default metric |
| level |
IS-IS level
|
[no] isis lsp-interval msec
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| lsp-interval |
Set LSP transmission interval |
| msec |
Type: integer min: 10 max: 65535 default: 33 LSP transmission interval (milliseconds) |
isis mesh-group { blocked | mesh-id } | no isis mesh-group [ blocked | mesh-id ]
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| mesh-group |
Set IS-IS mesh group |
| mesh-id |
Type: uinteger min: 1 max: 0 Mesh group number |
| blocked |
Block LSPs on this interface |
[no] isis metric metric level
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| metric |
Configure the metric for interface |
| metric |
Type: integer min: 0 max: 0 Default metric |
| level |
IS-IS level
|
[no] isis network point-to-point
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| network |
Change interface medium to p2p |
| point-to-point |
Change interface medium to p2p |
isis passive-interface level | no isis passive-interface [level] | default isis passive-interface [level]
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| passive-interface |
Suppress IS-IS PDU |
| default |
Undo a command |
| level |
Level to suppress
|
[no] isis priority priority { level-1 | level-2 }
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| priority |
Set priority for DIS election |
| priority |
Type: integer min: 0 max: 127 default: 64 Priority value |
| level-1 |
Specify priority for level-1 routing |
| level-2 |
Specify priority for level-2 routing |
[no] isis retransmit-interval sec
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| retransmit-interval |
Set per-LSP retransmission interval |
| sec |
Type: integer min: 1 max: 65535 default: 5 Interval between retransmissions of the same LSP (seconds) |
[no] isis retransmit-throttle-interval msec
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| retransmit-throttle-interval |
Set interface LSP retransmission interval |
| msec |
Type: integer min: 20 max: 65535 default: 66 Delay between retransmitted LSPs (milliseconds) |
[no] isis shutdown
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| shutdown |
Graceful shutdown IS-IS functionality on the interface |
[no] ip arp event-history { packet | event | sync-event | ip-sync-event | control | ha | errors | lcache | lcache-errors | client-event | client-errors | snmp | cli } size { size_in_text | size_in_Kbytes }
| no |
Negate a command or set its defaults |
| ip |
IP events |
| arp |
Configure ARP parameters |
| event-history |
log debug events into event history buffer |
| packet |
inst packet logs |
| event |
Internal event logs |
| sync-event |
CFS and MCECM related event logs |
| ip-sync-event |
L3 over vpc events |
| control |
ARP control event logs |
| ha |
HA and GR logs |
| errors |
inst error logs |
| lcache |
lcache logs |
| lcache-errors |
lcache_error logs |
| client-event |
Client_event logs |
| client-errors |
Client_error logs |
| cli |
cli logs |
| snmp |
SNMP logs |
| size |
Configure the size of the event-hist buffer |
| size_in_text |
Buffer size default: small
|
| size_in_Kbytes |
Type: uinteger Size of the file in kbytes |
ip arp gratuitous hsrp duplicate | no ip arp gratuitous hsrp duplicate
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
Configure ARP parameters |
| gratuitous |
gratuitous |
| hsrp |
hsrp |
| duplicate |
duplicate address detection |
ip arp gratuitous request | no ip arp gratuitous request
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
Configure ARP parameters |
| gratuitous |
gratuitous |
| request |
Enable/Disable sending grat. arp request when duplicate address detected |
ip arp gratuitous update | no ip arp gratuitous update
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
Configure ARP parameters |
| gratuitous |
gratuitous |
| update |
Enable/Disable arp cache updates for gratuitous arp |
[no] ip arp inspection filter arp-acl-name vlan vlan-range
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
Configure ARP parameters |
| inspection |
Arp Inspection configuration Not available in this release. |
| filter |
Filter |
| arp-acl-name |
Type: string length: 64 Access list name |
| vlan |
Vlan range |
| vlan-range |
Type: vlan-mrange VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19 |
[no] ip arp inspection log-buffer entries number1
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
Configure ARP parameters |
| inspection |
Arp Inspection configuration Not available in this release. |
| log-buffer |
Log Buffer Configuration |
| entries |
Number of entries for log buffer |
| number1 |
Type: uinteger min: 1 max: 1024 Number of entries for log buffer |
[no] ip arp inspection trust
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
Configure ARP parameters |
| inspection |
Arp Inspection configuration |
| trust |
Configure trust state |
[no] ip arp inspection validate { src-mac | dst-mac | ip1 } +
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
Configure ARP parameters |
| inspection |
Arp Inspection configuration Not available in this release. |
| validate |
Validate addresses |
| src-mac |
Validate source MAC address |
| dst-mac |
Validate destination MAC address |
| ip1 |
Validate IP addresses |
[no] ip arp inspection vlan vlan-id [ logging dhcp-bindings { permit | all | inone } ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
Configure ARP parameters |
| inspection |
Arp Inspection configuration Not available in this release. |
| vlan |
Enable/Disable ARP Inspection on vlans |
| vlan-id |
Type: vlan-mrange VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19 |
| logging |
Configure type of packets to be logged |
| dhcp-bindings |
Logging of packet that match DHCP bindings |
| permit |
Log DHCP Binding Permitted packets |
| all |
Log all packets that match DHCP bindings |
| inone |
Do not log packets |
ip arp mts-queue size | no ip arp mts-queue
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
ARP |
| mts-queue |
mts-queue |
| size |
Type: integer Size for arp data sap qlimit |
ip arp request ip-address
| ip |
Configure IP features |
| arp |
Configure ARP parameters |
| request |
Trigger ARP request |
| ip-address |
Type: ipaddr IP address |
ip arp synchronize [ pull | push ]
| ip |
Configure IP features |
| arp |
ARP |
| synchronize |
CFS synchronize |
| pull |
Initiate CFS pull request |
| push |
Initiate CFS push message |
[no] ip arp synchronize
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
ARP |
| synchronize |
CFS synchronize Not available in this release. |
ip arp timeout time-out | no ip arp timeout
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| arp |
Configure ARP parameters |
| timeout |
ARP timeout |
| time-out |
Type: integer min: 60 max: 28800 default: 1500 Time-out value in seconds |
ip as-path access-list aspl-name [ timeout sec ] { deny | permit } line | no ip as-path access-list aspl-name [ timeout sec ] [ { deny | permit } line ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| as-path |
BGP autonomous system path filter |
| access-list |
Specify an access list name |
| aspl-name |
Type: string pattern: [!-~]* length: 63 AS path access list name |
| aspl-name |
Type: string Known as-path access-list name |
| timeout |
Timeout to be used for checking regex cpu hog |
| sec |
Type: uinteger No. of seconds used as timeout |
| deny |
Specify packets to reject |
| permit |
Specify packets to forward |
[no] ip auto-discard
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| auto-discard |
Auto 0.0.0.0/0 discard route |
[no] ip cache disable
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| cache |
Disable cache |
| disable |
Disable cache |
ip community-list expanded name [ timeout sec ] { deny | permit } line | no ip community-list expanded name [ timeout sec ] [ { deny | permit } line ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| community-list |
Add a community list entry |
| expanded |
Add an expanded community list entry |
| name |
Type: string pattern: [!-~]* length: 63 Name of expanded community list |
| timeout |
Timeout to be used for checking regex cpu hog |
| sec |
Type: uinteger No. of seconds used as timeout |
| deny |
Specify community to reject |
| permit |
Specify community to accept |
ip community-list standard name { permit | deny } { internet | local-AS | no-advertise | no-export | aann | number | hex_num } + | no ip community-list standard name [ permit | deny ] { internet | local-AS | no-advertise | no-export | aann | number | hex_num } +
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| community-list |
Add a community list entry |
| standard |
Add a standard Community list entry |
| name |
Type: string pattern: [!-~]* length: 63 Standard community list name |
| permit |
Specify community to accept |
| deny |
Specify community to reject |
| internet |
Internet (well-known community) |
| local-AS |
Do not send outside local AS (well-known community) |
| no-advertise |
Do not advertise to any peer (well-known community) |
| no-export |
Do not export to next AS (well-known community) |
| aann |
Type: community Community number aa:nn format |
| number |
Type: uinteger min: 1 max: 4294967295 Community number |
| hex_num |
Type: hex Community number in hex |
[no] ip default-gateway ip-addr [ vrf { vrf-name | vrf-known-name } ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| default-gateway |
Configure default gateway |
| ip-addr |
Type: ipaddr IP prefix in format i.i.i.i |
| vrf |
Display per-VRF information |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name |
Type: vrf Known VRF name |
[no] ip dhcp packet strict-validation
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| packet |
DHCP packet |
| strict-validation |
DHCP packet strict validation |
[no] ip dhcp relay
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| relay |
Enable DHCP relay agent |
[no] ip dhcp relay address [ ip-addr-val [ use-vrf vrf-name ] ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| relay |
Configure relay agent |
| address |
Configure DHCP server to refer to |
| ip-addr-val |
Type: ipaddr IP address |
| use-vrf |
helper address VRF membership |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf length: 32 VRF name |
[no] ip dhcp relay information option
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| relay |
DHCP relay agent parameters |
| information |
Relay agent information option |
| option |
Insert relay information in BOOTREQUEST |
[no] ip dhcp relay information option vpn
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| relay |
DHCP relay agent parameters |
| information |
Relay agent information option |
| option |
Insert relay information in BOOTREQUEST |
| vpn |
Enable relay support across VRFs |
[no] ip dhcp relay sub-option type cisco
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| relay |
DHCP relay agent parameters |
| sub-option |
Relay agent suboption |
| type |
Relay agent suboption type |
| cisco |
Use Cisco propritery suboptions |
[no] ip dhcp relay subnet-broadcast
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| relay |
Configure DHCP relay |
| subnet-broadcast |
Configure DHCP relay subnet-broadcast on interface |
[no] ip dhcp smart-relay
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| smart-relay |
Configure DHCP smart relay on interface |
[no] ip dhcp smart-relay global
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| smart-relay |
Configure DHCP smart relay |
| global |
Configure DHCP smart relay globally |
[no] ip dhcp snooping
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| snooping |
DHCP Snooping Not available in this release. |
[no] ip dhcp snooping information option
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| snooping |
DHCP Snooping |
| information |
DHCP Snooping information |
| option |
DHCP Snooping information option |
[no] ip dhcp snooping trust
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| snooping |
DHCP Snooping |
| trust |
DHCP Snooping trust config |
[no] ip dhcp snooping verify mac-address
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| snooping |
DHCP Snooping |
| verify |
DHCP snooping verify |
| mac-address |
DHCP snooping verify mac-address |
[no] ip dhcp snooping vlan vlan-id10
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dhcp |
Configure DHCP snooping or relay |
| snooping |
DHCP Snooping |
| vlan |
DHCP Snooping vlan |
| vlan-id10 |
Type: vlan-mrange VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19 |
[no] ip directed-broadcast [acl-name]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| directed-broadcast |
IP directed-broadcast |
| acl-name |
Type: string length: 63 ACL policy name |
[no] ip dns source-interface ifnum [ vrf { vrf-name | vrf-known-name } ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| dns |
Configure dns client |
| source-interface |
Configure source interface feature for domain-lookup |
| ifnum |
Type: interface Source interface |
| vrf |
Configure VRF |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name |
Type: vrf Known VRF name |
[no] ip domain-list { s0 | s1 [ use-vrf { vrf-name | vrf-known-name } ] }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| domain-list |
Add additional domain names |
| s0 |
Type: string length: 64 Enter a domain |
| s1 |
Type: string length: 64 Enter a domain |
| use-vrf |
Display per-VRF information |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 64 VRF name |
| vrf-known-name |
Type: vrf length: 64 Known VRF name |
[no] ip domain-lookup
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| domain-lookup |
Enable/Disable DNS |
[no] ip domain-name { s0 | s1 [ use-vrf { vrf-name | vrf-known-name } ] }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| domain-name |
Specify default domain name |
| s0 |
Type: string length: 64 Enter the default domain |
| s1 |
Type: string length: 64 Enter the default domain |
| use-vrf |
Display per-VRF information |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 64 VRF name |
| vrf-known-name |
Type: vrf length: 64 Known VRF name |
[no] ip dscp dscp_value
| no |
Negate a command or set its defaults |
| ip |
Set ERSPAN IP options |
| dscp |
Set the IP DSCP value |
| dscp_value |
Type: integer min: 0 max: 63 |
[no] ip eigrp eigrp-tag bfd [disable]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| eigrp |
EIGRP interface configuration commands |
| eigrp-tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
| bfd |
Enable BFD on this interface |
| disable |
Disable BFD on this interface |
[no] ip eigrp [eigrp-ptag] event-history bfd size { size_in_text | size_in_Kbytes }
| no |
Negate a command or set its defaults |
| ip |
Clear IP commands |
| eigrp |
EIGRP clear commands |
| eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
| event-history |
EIGRP event-history |
| bfd |
Show bfd log of EIGRP |
| size |
Configure the size of the event-hist buffer |
| size_in_text |
Buffer size default: small
|
| size_in_Kbytes |
Type: uinteger Size of the file in kbytes |
ip extcommunity-list expanded name { deny | permit } line | no ip extcommunity-list expanded name [ { deny | permit } line ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| extcommunity-list |
Add a extcommunity list entry |
| expanded |
Add an expanded extcommunity list entry |
| name |
Type: string pattern: [!-~]* length: 63 Name of expanded extcommunity list |
| deny |
Specify extcommunity to reject |
| permit |
Specify extcommunity to accept |
ip extcommunity-list standard name { permit | deny } { 4byteas-generic { transitive ext-comm-gen-trans | non-transitive ext-comm-gen-nontrans } | rt { ext-comm-rt-aa2nn4 | ext-comm-rt-aa4nn2 } | soo { ext-comm-soo-aa2nn4 | ext-comm-soo-aa4nn2 } } + | no ip extcommunity-list standard name [ permit | deny ] [ 4byteas-generic { transitive ext-comm-gen-trans | non-transitive ext-comm-gen-nontrans } | rt { ext-comm-rt-aa2nn4 | ext-comm-rt-aa4nn2 } | soo { ext-comm-soo-aa2nn4 | ext-comm-soo-aa4nn2 } ] +
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| extcommunity-list |
Add a extcommunity list entry |
| standard |
Add a standard Extcommunity list entry |
| name |
Type: string pattern: [!-~]* length: 63 Standard extcommunity list name |
| permit |
Specify extcommunity to accept |
| deny |
Specify extcommunity to reject |
| 4byteas-generic |
Generic extended community |
| transitive |
Transitive extcommunity |
| non-transitive |
Non-Transitive extcommunity |
| rt |
Router-Target |
| soo |
Site-Of-Origin |
| ext-comm-gen-trans |
Type: community Extcommunity number aa4:nn format |
| ext-comm-gen-nontrans |
Type: community Extcommunity number aa4:nn format |
| ext-comm-rt-aa2nn4 |
Type: community Extcommunity number |
| ext-comm-rt-aa4nn2 |
Type: community Extcommunity number |
| ext-comm-soo-aa2nn4 |
Type: community Extcommunity number |
| ext-comm-soo-aa4nn2 |
Type: community Extcommunity number |
{ [seqno] | no } { addr wild | prefix | host hostaddr }
| seqno |
Type: uinteger min: 1 max: 4294967295 Sequence number |
| no |
Negate a command or set its defaults |
| addr |
Type: ipaddr A.B.C.D Network address of object-group member |
| wild |
Type: ipaddr A.B.C.D wildcard |
| prefix |
Type: ipprefix A.B.C.D/nn Network prefix of the object-group member |
| host |
Host address of the object-group member |
| hostaddr |
Type: ipaddr A.B.C.D Host address |
[no] ip host s0 ipv4_0
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| host |
Add an entry to the ip hostname table |
| s0 |
Type: string length: 64 Name of Host |
| ipv4_0 |
Type: ipaddr Enter an IP address |
[no] ip igmp { static-group | static-oif } { group [ source source ] | route-map route-map-name }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| static-group |
Configures static oif for a multicast forwarding entry |
| static-oif |
Configures static oif for a multicast forwarding entry |
| group |
Type: ipaddr Multicast group IP address |
| source |
Configures source address for IGMPv3 (S,G) Channel |
| source |
Type: ipaddr Source IP address |
| route-map |
Static group policy |
| route-map-name |
Type: string length: 63 route-map name |
[no] ip igmp allow-v3-asm
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| allow-v3-asm |
Accept IGMPv3 reports for non SSM groups |
[no] ip igmp any-query-destination
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| any-query-destination |
Allow any destination-IP for General Queries |
no ip igmp bootup-delay [delay] | ip igmp bootup-delay delay
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| bootup-delay |
Configures bootup route add delay to RIB |
| delay |
Type: integer min: 1 max: 0 default: 0 Delay downloading in seconds |
[no] ip igmp enforce-router-alert
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| enforce-router-alert |
Enforce Router Alert option check for IGMPv2 and IGMPv3 packets |
[no] ip igmp event-history { interface-debugs | group-debugs } size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| event-history |
Configure event-history buffers |
| interface-debugs |
Interface-debugs for IGMP |
| group-debugs |
Group-debugs for IGMP |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp event-history { interface-events | group-events } size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| event-history |
Configure event-history buffers |
| interface-events |
Interface-events for IGMP |
| group-events |
Group-events for IGMP |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp event-history cli size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| event-history |
Configure event-history buffers |
| cli |
CLI events for IGMP |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp event-history ha size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| event-history |
Configure event-history buffers |
| ha |
HA events for IGMP |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp event-history igmp-internal size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| event-history |
Configure event-history buffers |
| igmp-internal |
Internal events for IGMP |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp event-history mtrace size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| event-history |
Configure event-history buffers |
| mtrace |
Mtrace events for IGMP |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp event-history policy size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| event-history |
Configure event-history buffers |
| policy |
Policy events for IGMP |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp event-history vrf size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| event-history |
Configure event-history buffers |
| vrf |
VRF events for IGMP |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp file-debug
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| file-debug |
Collect all debugs to a file |
[no] ip igmp flush-routes
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| flush-routes |
Remove routes when restarting IGMP |
[no] ip igmp group-specific-strict
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| group-specific-strict |
Enable group specific consistency check |
no ip igmp group-timeout [time] | ip igmp group-timeout time
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| group-timeout |
Configures group membership timeout for IGMPv2 |
| time |
Type: integer min: 3 max: 0 default: 260 Time in seconds |
[no] ip igmp ha-stateful
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| ha-stateful |
Enable stateful IGMP HA |
[no] ip igmp immediate-leave
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| immediate-leave |
Enable/Disable immediate leave |
[no] ip igmp join-group { group [ source source ] | route-map route-map-name }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| join-group |
Configures local group membership for router |
| group |
Type: ipaddr Multicast group IP address |
| source |
Configures source address for IGMPv3 (S,G) Channel |
| source |
Type: ipaddr Source IP address |
| route-map |
Join group policy |
| route-map-name |
Type: string length: 63 route-map name |
no ip igmp last-member-query-count [count] | ip igmp last-member-query-count count
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| last-member-query-count |
Configures number of group-specific Queries sent |
| count |
Type: integer min: 1 max: 5 Count value |
no ip igmp last-member-query-response-time [interval] | ip igmp last-member-query-response-time interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| last-member-query-response-time |
Configures last member query response time |
| interval |
Type: integer min: 1 max: 25 default: 1 Interval in seconds |
no ip igmp { querier-timeout | query-timeout } [time] | ip igmp { querier-timeout | query-timeout } time
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| querier-timeout |
Configures querier timeout for IGMPv2 |
| query-timeout |
Configures querier timeout for IGMPv2 |
| time |
Type: integer min: 1 max: 0 default: 255 Time in seconds |
no ip igmp query-interval [interval] | ip igmp query-interval interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| query-interval |
Configures interval between Query transmission |
| interval |
Type: integer min: 1 max: 18000 default: 125 Interval in seconds |
no ip igmp query-max-response-time [time] | ip igmp query-max-response-time time
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| query-max-response-time |
Configures MRT for query messages |
| time |
Type: integer min: 1 max: 25 default: 10 Time in seconds |
[no] ip igmp report-link-local-groups
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| report-link-local-groups |
Send Reports for groups in 224.0.0.0/24 |
ip igmp { report-policy | access-group } { route-map-name | prefix-list prefix-list-name } | no ip igmp { report-policy | access-group } [ route-map-name | prefix-list prefix-list-name ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| report-policy |
IGMP Report Policy |
| access-group |
IGMP access-group |
| route-map-name |
Type: string length: 100 Route-map name |
| prefix-list |
Prefix list policy |
| prefix-list-name |
Type: string length: 63 prefix-list name |
no ip igmp robustness-variable [value] | ip igmp robustness-variable value
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| robustness-variable |
Configures RFC defined Robustness Variable |
| value |
Type: integer min: 1 max: 7 default: 2 Count value |
[no] ip igmp snooping { optimised-multicast-flood | optimise-multicast-flood }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| optimised-multicast-flood |
Configures Optimised Multicast Flood (OMF) on the VLAN |
| optimise-multicast-flood |
Configures Optimised Multicast Flood (OMF) on the VLAN |
no ip igmp snooping | ip igmp snooping
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
no ip igmp snooping | ip igmp snooping
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| snooping |
Configures IGMP Snooping |
[no] ip igmp snooping { ha-stateful | cc-mode | m2rib-max-omfs omf-count | m2rib-max-omf-routes omf-route-count | m2rib-max-routes route-count | m2rib-max-buffers buf-count }
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| snooping |
Configures IGMP Snooping |
| no |
Negate a command or set its defaults |
| ha-stateful |
Enable stateful IGMP-Snooping HA |
| cc-mode |
Enter MFDM congestion-control mode |
| m2rib-max-omfs |
Number of OMF entries in M2RIB buffer |
| m2rib-max-routes |
Number of route entries in M2RIB buffer |
| m2rib-max-omf-routes |
Number of omf route entries in M2RIB buffer |
| m2rib-max-buffers |
Number of update buffers with M2RIB |
| omf-count |
Type: uinteger min: 50 max: 400 default: 400 |
| route-count |
Type: uinteger min: 100 max: 400 default: 400 |
| buf-count |
Type: uinteger min: 3 max: 4 default: 4 |
| omf-route-count |
Type: uinteger min: 10 max: 50 default: 50 |
no ip igmp snooping | ip igmp snooping
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
[no] ip igmp snooping event-history igmp-snoop-internal size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| snooping |
Configures IGMP Snooping |
| event-history |
Configure event-history buffers |
| igmp-snoop-internal |
Internal events for IGMP-snoop |
| size |
Configure size |
| size_in_text |
Buffer size default: large
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp snooping event-history mfdm size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| snooping |
Configures IGMP Snooping |
| event-history |
Configure event-history buffers |
| mfdm |
MFDM events for IGMP-snoop |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp snooping event-history mfdm-sum size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| snooping |
Configures IGMP Snooping |
| event-history |
Configure event-history buffers |
| mfdm-sum |
MFDM-SUM events for IGMP-snoop |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp snooping event-history rib size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| snooping |
Configures IGMP Snooping |
| event-history |
Configure event-history buffers |
| rib |
RIB events for IGMP-snoop |
| size |
Configure siaze |
| size_in_text |
Buffer size default: large
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp snooping event-history vlan-events size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| snooping |
Configures IGMP Snooping |
| event-history |
Configure event-history buffers |
| vlan-events |
VLAN/BD events for IGMP-snoop |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp snooping event-history vlan size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| snooping |
Configures IGMP Snooping |
| event-history |
Configure event-history buffers |
| vlan |
VLAN/BD events for IGMP-snoop |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip igmp snooping event-history vpc size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| snooping |
Configures IGMP Snooping |
| event-history |
Configure event-history buffers |
| vpc |
VPC events for IGMP-snoop |
| size |
Configure size |
| size_in_text |
Buffer size default: large
|
| size_in_kbytes |
Type: integer Size in kbytes |
no ip igmp snooping explicit-tracking | ip igmp snooping explicit-tracking
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| explicit-tracking |
Configures Explicit Host tracking for VLAN/BD |
no ip igmp snooping explicit-tracking | ip igmp snooping explicit-tracking
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| explicit-tracking |
Configures Explicit Host tracking for VLAN/BD |
no ip igmp snooping fast-leave | ip igmp snooping fast-leave
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| fast-leave |
Configures Fast leave for the VLAN/BD |
no ip igmp snooping fast-leave | ip igmp snooping fast-leave
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| fast-leave |
Configures Fast leave for the VLAN/BD |
[no] ip igmp snooping group-timeout { timeout | never }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| group-timeout |
Configures group membership timeout in all VLAN/BDs |
| timeout |
Type: uinteger min: 1 max: 10080 Timeout in minutes |
| never |
Never expire ports from group membership |
[no] ip igmp snooping group-timeout { timeout | never }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| group-timeout |
Configures group membership timeout in VLAN/BD |
| timeout |
Type: uinteger min: 1 max: 10080 Timeout in minutes |
| never |
Never expire ports from group membership |
no ip igmp snooping last-member-query-count [count] | ip igmp snooping last-member-query-count count
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| last-member-query-count |
Configures number of group-specific queries sent |
| count |
Type: uinteger min: 1 max: 5 Count value |
no ip igmp snooping last-member-query-count [count] | ip igmp snooping last-member-query-count count
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| last-member-query-count |
Configures number of group-specific queries sent |
| count |
Type: uinteger min: 1 max: 5 Count value |
no ip igmp snooping last-member-query-interval [interval] | ip igmp snooping last-member-query-interval interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| last-member-query-interval |
Configures interval between group-specific Query transmissions |
| interval |
Type: integer min: 1 max: 25 default: 1 Interval in seconds |
no ip igmp snooping last-member-query-interval [interval] | ip igmp snooping last-member-query-interval interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| last-member-query-interval |
Configures interval between group-specific Query transmissions |
| interval |
Type: integer min: 1 max: 25 default: 1 Interval in seconds |
[no] ip igmp snooping link-local-groups-suppression
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| link-local-groups-suppression |
Configures VLAN/BD link-local groups suppression |
[no] ip igmp snooping link-local-groups-suppression
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| link-local-groups-suppression |
Configures Global link-local groups suppression |
[no] ip igmp snooping link-local-groups-suppression
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| link-local-groups-suppression |
Configures VLAN/BD link-local groups suppression |
no ip igmp snooping mrouter interface interface | ip igmp snooping mrouter interface interface
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| mrouter |
Configures static multicast router interface |
| interface |
Specify interface for static-mrouter |
| interface |
Type: interface Interface name |
no ip igmp snooping mrouter interface interface | ip igmp snooping mrouter interface interface
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| mrouter |
Configures static multicast router interface |
| interface |
Specify interface for static-mrouter |
| interface |
Type: interface Interface name |
[no] ip igmp snooping optimise-multicast-flood
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| optimise-multicast-flood |
Configures Optimized Multicast Flood (OMF) on all VLAN/BDs |
[no] ip igmp snooping optimise-multicast-flood
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| optimise-multicast-flood |
Configures Optimised Multicast Flood (OMF) on the VLAN/BD |
[no] ip igmp snooping optimised-multicast-flood
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| optimised-multicast-flood |
Configures Optimised Multicast Flood (OMF) on the VLAN/BD |
[no] ip igmp snooping proxy general-queries [ mrt mrt ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| proxy |
Configures IGMP snooping proxy |
| general-queries |
Configures proxy for general-queries |
| mrt |
Configure max-response-time for the switch's proxy general-queries |
| mrt |
Type: uinteger min: 1 max: 25 default: 5 MRT in seconds |
[no] ip igmp snooping proxy general-queries [ mrt mrt ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| proxy |
Configures IGMP snooping proxy |
| general-queries |
Configures proxy for general-queries |
| mrt |
Configure max-response-time for the switch's proxy general-queries |
| mrt |
Type: uinteger min: 1 max: 25 default: 5 MRT in seconds |
no ip igmp snooping querier [querier] | ip igmp snooping querier querier
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| querier |
Enables snooping querier |
| querier |
Type: ipaddr Querier IP address |
no ip igmp snooping querier [querier] | ip igmp snooping querier querier
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| querier |
Enables snooping querier |
| querier |
Type: ipaddr Querier IP address |
no ip igmp snooping querier-timeout [time] | ip igmp snooping querier-timeout time
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| querier-timeout |
Configures querier timeout for IGMPv2 |
| time |
Type: uinteger min: 1 max: 0 default: 255 Time in seconds |
no ip igmp snooping querier-timeout [time] | ip igmp snooping querier-timeout time
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| querier-timeout |
Configures querier timeout for IGMPv2 |
| time |
Type: uinteger min: 1 max: 0 default: 255 Time in seconds |
no ip igmp snooping query-interval [interval] | ip igmp snooping query-interval interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| query-interval |
Configures interval between query transmission |
| interval |
Type: uinteger min: 1 max: 18000 default: 125 Interval in seconds |
no ip igmp snooping query-interval [interval] | ip igmp snooping query-interval interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| query-interval |
Configures interval between query transmission |
| interval |
Type: uinteger min: 1 max: 18000 default: 125 Interval in seconds |
no ip igmp snooping query-max-response-time [time] | ip igmp snooping query-max-response-time time
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| query-max-response-time |
Configures MRT for query messages |
| time |
Type: uinteger min: 1 max: 25 default: 10 Time in seconds |
no ip igmp snooping query-max-response-time [time] | ip igmp snooping query-max-response-time time
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| query-max-response-time |
Configures MRT for query messages |
| time |
Type: uinteger min: 1 max: 25 default: 10 Time in seconds |
[no] ip igmp snooping { report-policy | access-group } { prefix-list | route-map } pname interface interface
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| report-policy |
IGMP Report Policy |
| access-group |
IGMP access-group |
| prefix-list |
IPv4 Prefix-List Policy |
| route-map |
Route-Map Policy |
| pname |
Type: string length: 63 Policy Name Name |
| interface |
Specify interface for filtering |
| interface |
Type: interface Interface name |
no ip igmp snooping report-suppression | ip igmp snooping report-suppression
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| report-suppression |
Configures IGMPv1/IGMPv2 Report Suppression for the VLAN/BD |
no ip igmp snooping report-suppression | ip igmp snooping report-suppression
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| report-suppression |
Configures Global IGMPv1/IGMPv2 Report Suppression |
no ip igmp snooping report-suppression | ip igmp snooping report-suppression
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| report-suppression |
Configures IGMPv1/IGMPv2 Report Suppression for the VLAN/BD |
no ip igmp snooping robustness-variable [value] | ip igmp snooping robustness-variable value
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| robustness-variable |
Configures RFC defined Robustness Variable |
| value |
Type: uinteger min: 1 max: 7 default: 2 Count value |
no ip igmp snooping robustness-variable [value] | ip igmp snooping robustness-variable value
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| robustness-variable |
Configures RFC defined Robustness Variable |
| value |
Type: uinteger min: 1 max: 7 default: 2 Count value |
[no] ip igmp snooping self-mac-check
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| self-mac-check |
enable loopback packet check and drop it |
| snooping |
Configures IGMP Snooping |
no ip igmp snooping startup-query-count [count] | ip igmp snooping startup-query-count count
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| startup-query-count |
Configures number of queries sent at startup |
| count |
Type: uinteger min: 1 max: 10 Count value |
no ip igmp snooping startup-query-count [count] | ip igmp snooping startup-query-count count
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| startup-query-count |
Configures number of queries sent at startup |
| count |
Type: uinteger min: 1 max: 10 Count value |
no ip igmp snooping startup-query-interval [interval] | ip igmp snooping startup-query-interval interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| startup-query-interval |
Configures query interval at startup |
| interval |
Type: uinteger min: 1 max: 18000 Interval in seconds |
no ip igmp snooping startup-query-interval [interval] | ip igmp snooping startup-query-interval interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| startup-query-interval |
Configures query interval at startup |
| interval |
Type: uinteger min: 1 max: 18000 Interval in seconds |
no ip igmp snooping static-group group [ source source ] interface interface | ip igmp snooping static-group group [ source source ] interface interface
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| static-group |
Configures static group membership |
| group |
Type: ipaddr Group IP Address |
| source |
Configures static (S,G) channel |
| source |
Type: ipaddr Source IP Address |
| interface |
Specify interface for static-group |
| interface |
Type: interface Interface name |
no ip igmp snooping static-group group [ source source ] interface interface | ip igmp snooping static-group group [ source source ] interface interface
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| static-group |
Configures static group membership |
| group |
Type: ipaddr Group IP Address |
| source |
Configures static (S,G) channel |
| source |
Type: ipaddr Source IP Address |
| interface |
Specify interface for static-group |
| interface |
Type: interface Interface name |
no ip igmp snooping v3-report-suppression | ip igmp snooping v3-report-suppression
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| v3-report-suppression |
Configures IGMPv3 Report Suppression and Proxy Reporting for the VLAN/BD |
no ip igmp snooping v3-report-suppression | ip igmp snooping v3-report-suppression
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| v3-report-suppression |
Configures Global IGMPv3 Report Suppression and Proxy Reporting |
no ip igmp snooping v3-report-suppression | ip igmp snooping v3-report-suppression
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| v3-report-suppression |
Configures IGMPv3 Report Suppression and Proxy Reporting for the VLAN/BD |
no ip igmp snooping version [version] | ip igmp snooping version version
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| version |
Configures IGMP version number for VLAN/BD |
| version |
Type: uinteger min: 2 max: 3 Version number value |
no ip igmp snooping version [version] | ip igmp snooping version version
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| version |
Configures IGMP version number for VLAN/BD |
| version |
Type: uinteger min: 2 max: 3 Version number value |
ip igmp snooping vpc { clear-cfs-flag | clear-pending-flag | clear-native-flag }
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| snooping |
Configures IGMP Snooping |
| vpc |
vPC related command |
| clear-cfs-flag |
clear cfs learnt flag from the routes / oifs |
| clear-native-flag |
clear native learnt flag from the routes / oifs |
| clear-pending-flag |
clear pending flag if set |
ip igmp snooping vpc [ vpc-incremental | vpc-sync-only ]
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| snooping |
Configures IGMP Snooping |
| vpc |
vPC related events |
| vpc-sync-only |
default - no vpc-incremental with route proxy disabled |
| vpc-incremental |
vpc-incremental mode with route proxy enabled |
[no] ip igmp snooping vpc peer-link-exclude
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP configuration commands |
| snooping |
Configures IGMP Snooping |
| vpc |
Configures vPC |
| peer-link-exclude |
Exclude vPC Peer-link for Routed multicast traffic |
ip igmp snooping vpc peer-routes-download [stale]
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| snooping |
Configures IGMP Snooping |
| vpc |
vPC related command |
| peer-routes-download |
get peer-learnt routes |
| stale |
stale the cfs learnt entry, i.e. clear cfs_flag |
[no] ip igmp ssm-translate group source
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP global configuration commands |
| ssm-translate |
Translate IGMPv1/v2 reports to (S,G) route entries |
| group |
Type: ipprefix IP Multicast group range |
| source |
Type: ipaddr IP Multicast address source |
no ip igmp startup-query-count [count] | ip igmp startup-query-count count
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| startup-query-count |
Configures number of queries sent at startup |
| count |
Type: integer min: 1 max: 10 Count value |
no ip igmp startup-query-interval [interval] | ip igmp startup-query-interval interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| startup-query-interval |
Configures query interval at startup |
| interval |
Type: integer min: 1 max: 18000 Interval in seconds |
ip igmp state-limit max-states [ reserved route-map-name max-reserved ] | no ip igmp state-limit [ max-states [ reserved route-map-name max-reserved ] ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| state-limit |
Configures State limit |
| max-states |
Type: uinteger min: 1 max: 4294967295 Maximum states allowed |
| reserved |
Reserve the states using route-map |
| route-map-name |
Type: string length: 100 Route-map name |
| max-reserved |
Type: uinteger min: 1 max: 4294967295 Maximum (*,G)/(S,G) entires allowed on the interface |
no ip igmp version [version] | ip igmp version version
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| igmp |
IGMP interface configuration commands |
| version |
Configures IGMP version number for interface |
| version |
Type: integer min: 2 max: 3 Version number value |
{ ip | ipv6 } bandwidth-percent eigrp eigrp-ptag percent | no { ip | ipv6 } bandwidth-percent eigrp eigrp-ptag [percent]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ipv6 |
Configure IPv6 features |
| bandwidth-percent |
Configures IP-EIGRP bandwidth limit |
| eigrp |
EIGRP interface configuration commands |
| eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
| percent |
Type: integer min: 1 max: 100 default: 50 Maximum bandwidth percentage that EIGRP may use |
{ ip | ipv6 } bandwidth eigrp eigrp-ptag bw | no { ip | ipv6 } bandwidth eigrp eigrp-ptag [bw]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ipv6 |
Configure IPv6 features |
| bandwidth |
Set bandwidth for interface used in EIGRP metric calculation |
| eigrp |
EIGRP interface configuration commands |
| eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
| bw |
Type: uinteger min: 1 max: 2560000000 Bandwidth in kilobits |
{ ip | ipv6 } delay eigrp eigrp-ptag delay [picoseconds] | no { ip | ipv6 } delay eigrp eigrp-ptag [delay] [picoseconds]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ipv6 |
Configure IPv6 features |
| delay |
Set delay for interface used in EIGRP metric calculation |
| eigrp |
EIGRP interface configuration commands |
| eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
| delay |
Type: uinteger min: 1 max: 0 Throughput delay |
| picoseconds |
Delay units in picoseconds |
{ ip | ipv6 } hello-interval eigrp eigrp-ptag hello-interval | no { ip | ipv6 } hello-interval eigrp eigrp-ptag [hello-interval]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ipv6 |
Configure IPv6 features |
| hello-interval |
Configures IP-EIGRP hello interval |
| eigrp |
EIGRP interface configuration commands |
| eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
| hello-interval |
Type: integer min: 1 max: 0 default: 5 Seconds between hello transmissions |
{ ip | ipv6 } hold-time eigrp eigrp-ptag holdtime | no { ip | ipv6 } hold-time eigrp eigrp-ptag [holdtime]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ipv6 |
Configure IPv6 features |
| hold-time |
Configures IP-EIGRP hold time |
| eigrp |
EIGRP interface configuration commands |
| eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
| holdtime |
Type: integer min: 1 max: 0 default: 15 Seconds before neighbor is considered down |
[no] ip summary-address eigrp eigrp-ptag { address mask | prefix } [distance] [ leak-map leak-map ] | [no] ipv6 summary-address eigrp eigrp-ptag ipv6-prefix [distance] [ leak-map leak-map ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ipv6 |
Configure IPv6 features |
| summary-address |
Configures IP-EIGRP summary address on interface |
| eigrp |
EIGRP interface configuration commands |
| eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
| address |
Type: ipaddr IP address |
| mask |
Type: ipaddr IP network mask |
| prefix |
Type: ipprefix IP prefix in slash format |
| ipv6-prefix |
Type: ipv6prefix IPv6 prefix <network>/<length> |
| distance |
Type: integer min: 1 max: 0 default: 5 Administrative distance |
| leak-map |
Allow dynamic prefixes based on the leak-map |
| leak-map |
Type: string leak-map name |
[no] ip load-sharing address { source-destination [ port source-destination2 | gre ] | destination port2 destination2 } { [ rotate rotate ] | [concatenation] } + [ universal-id random-seed ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| load-sharing |
ECMP load-sharing |
| address |
Configure source/destination addresses, port numbers and hash |
| source-destination |
Use both source and destination values for address |
| port |
Use source-destination value for port |
| gre |
Use source-destination value for gre-key |
| source-destination2 |
Use both source and destination values for port |
| destination |
Use destination address |
| port2 |
Use destination value for port |
| destination2 |
Use destination port |
| rotate |
Offset to be used in the hash |
| rotate |
Type: uinteger min: 1 max: 63 Value used for offset, default value is 32 |
| concatenation |
Enable/Disable concatenation |
| universal-id |
Universal-id to randomize hash functions for load-balance |
| random-seed |
Type: uinteger min: 1 max: 0 Value used to randomize hash |
ip load-sharing per-packet | no ip load-sharing [per-packet]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| load-sharing |
Style of load sharing Not available in this release. |
| per-packet |
Enable per-packet load balancing on interface Not available in this release. |
ip local-proxy-arp | no ip local-proxy-arp
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| local-proxy-arp |
Configure local proxy ARP |
[no] ip mfwd event-history cli size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| mfwd |
Configures Global IP Multicast Forwarding |
| event-history |
Configure event-history buffers |
| cli |
CLI events for MCASTFWD |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip mfwd event-history l2 size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| mfwd |
Configures Global IP Multicast Forwarding |
| event-history |
Configure event-history buffers |
| l2 |
Layer2 events for MCASTFWD |
| size |
Configure size |
| size_in_text |
Buffer size default: large
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip mfwd event-history packet size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| mfwd |
Configures Global IP Multicast Forwarding |
| event-history |
Configure event-history buffers |
| packet |
Packet events for Multicast forwarding |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip mfwd event-history vrf size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| mfwd |
Configures Global IP Multicast Forwarding |
| event-history |
Configure event-history buffers |
| vrf |
VRF events for MCASTFWD |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip mroute { ip-addr ip-mask | ip-prefix } { { next-hop | nh-prefix } | interface } [pref] [ vrf { vrf-name | vrf-known-name } ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| mroute |
Configure multicast RPF static route |
| ip-addr |
Type: ipaddr IP prefix in format i.i.i.i |
| ip-mask |
Type: ipaddr IP network mask in format m.m.m.m |
| ip-prefix |
Type: ipprefix IP prefix and network mask length in format x.x.x.x/m |
| next-hop |
Type: ipaddr IP next-hop address in format i.i.i.i |
| nh-prefix |
Type: ipprefix IP next-hop prefix in format i.i.i.i/m |
| interface |
Type: interface Interface for interface static multicast routes |
| pref |
Type: integer min: 1 max: 255 default: 1 Route preference |
| vrf |
Display per-VRF information |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name |
Type: vrf Known VRF name |
ip msdp description peer-address text | no ip msdp description peer-address [text]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| description |
Configure MSDP description for peer |
| peer-address |
Type: ipaddr IP address of MSDP peer |
| text |
Type: remainder Text description |
[no] ip msdp event-history cli size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| event-history |
Configure event-history buffer |
| cli |
CLI logs for MSDP |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip msdp event-history events size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| event-history |
Configure event-history buffer |
| events |
Peer events for MSDP |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip msdp event-history msdp-internal size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| event-history |
Configure event-history buffer |
| msdp-internal |
Internal logs for MSDP |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip msdp event-history routes size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| event-history |
Configure event-history buffer |
| routes |
Route logs for MSDP |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip msdp event-history tcp size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| event-history |
Configure event-history buffer |
| tcp |
TCP logs for MSDP |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip msdp flush-routes
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| flush-routes |
Remove routes when restarting MSDP |
[no] ip msdp group-limit limit source sprefix
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| group-limit |
Limit the number of groups per source |
| limit |
Type: uinteger Limit on number of groups |
| source |
Sources to limit groups to |
| sprefix |
Type: ipprefix Prefix to match sources against |
ip msdp keepalive peer-address interval timeout | no ip msdp keepalive peer-address [ interval timeout ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| keepalive |
Configure MSDP keepalive parameters for peer |
| peer-address |
Type: ipaddr IP address of MSDP peer |
| interval |
Type: integer min: 1 max: 60 default: 60 Keepalive interval in seconds |
| timeout |
Type: integer min: 1 max: 90 default: 90 Keepalive timeout in seconds |
ip msdp mesh-group peer-address name | no ip msdp mesh-group peer-address [name]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| mesh-group |
Configure member of mesh-group |
| name |
Type: string Name of mesh-group |
| peer-address |
Type: ipaddr IP address of MSDP peer in mesh-group |
[no] ip msdp no-sa-data
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| no-sa-data |
Don't send SA-encapsulated data |
ip msdp originator-id interface | no ip msdp originator-id [interface]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| originator-id |
Configure alternative router-id for MSDP |
| interface |
Type: interface Use IP address of interface for originator-id |
ip msdp password peer-address password | no ip msdp password peer-address [password]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| password |
Configure MD5 authentication password |
| peer-address |
Type: ipaddr IP address of MSDP peer |
| password |
Type: password MD5 password |
ip msdp peer peer-address connect-source interface [ remote-as asn ] | no ip msdp peer peer-address [ connect-source interface ] [ remote-as asn ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| peer |
Configure MSDP peer |
| peer-address |
Type: ipaddr IP address of MSDP peer |
| connect-source |
Configure local IP address for TCP connection |
| interface |
Type: interface Use IP address of interface for peer address |
| remote-as |
Configure remote Autonomous System Number |
| asn |
Type: asn AS number |
ip msdp reconnect-interval interval | no ip msdp reconnect-interval [interval]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| reconnect-interval |
Configure connection reconnect interval |
| interval |
Type: integer min: 1 max: 60 default: 10 Interval in seconds |
[no] ip msdp redistribute [ route-map route-map-name | prefix-list prefix-list-name ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| redistribute |
Configure SA policy for all MSDP peer |
| route-map |
route-map policy |
| route-map-name |
Type: string length: 63 route-map policy name |
| prefix-list |
Prefix list policy |
| prefix-list-name |
Type: string length: 63 prefix-list name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
ip msdp sa-interval interval | no ip msdp sa-interval [interval]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| sa-interval |
Configure Source-Active message transmission interval |
| interval |
Type: integer min: 60 max: 65535 default: 60 Interval in seconds |
ip msdp sa-limit peer-address limit | no ip msdp sa-limit peer-address [limit]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| sa-limit |
Configure maximum (S,G) entries allowed |
| limit |
Type: uinteger Number of (S,G) entries |
| peer-address |
Type: ipaddr IP address of MSDP peer in mesh-group |
[no] ip msdp sa-policy peer-address { route-map-name | prefix-list prefix-list-name | rtr_pol_name } in
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| sa-policy |
Configure SA policy for MSDP peer |
| prefix-list |
Prefix list policy |
| in |
Input policy |
| peer-address |
Type: ipaddr IP address of MSDP peer for SA policy |
| route-map-name |
Type: string length: 63 route-map policy name |
| prefix-list-name |
Type: string length: 63 prefix-list name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
[no] ip msdp sa-policy peer-address { route-map-name | prefix-list prefix-list-name | rtr_pol_name } out
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| sa-policy |
Configure SA policy for MSDP peer |
| prefix-list |
Prefix list policy |
| out |
Output policy |
| peer-address |
Type: ipaddr IP address of MSDP peer for SA policy |
| route-map-name |
Type: string length: 63 route-map policy name |
| prefix-list-name |
Type: string length: 63 prefix-list name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
ip msdp shutdown peer-address | no ip msdp shutdown peer-address
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| msdp |
MSDP global configuration commands |
| shutdown |
Administratively shut down peer |
| peer-address |
Type: ipaddr IP address of MSDP peer |
ip multicast last-hop-meter kbps [burst-size] | no ip multicast last-hop-meter [ kbps [burst-size] ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| multicast |
Configure IP multicast global parameters |
| last-hop-meter |
RPF-failed meter |
| kbps |
Type: uinteger min: 8 max: 0 default: 100 Rate in kilobits/sec |
| burst-size |
Type: uinteger min: 100 max: 0 default: 100 Burst size in kilobytes |
[no] ip multicast multipath { none | s-g-hash next-hop-based }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| multicast |
Configure IP multicast global parameters |
| multipath |
Configure ECMP multicast load splitting |
| none |
Disable ECMP multicast load splitting |
| s-g-hash |
Configure hash based on source and group address |
| next-hop-based |
Configure hash based on source, group, next-hop address |
ip multicast rpf-meter { kbps [burst-size] | hardware-drop-all } | no ip multicast rpf-meter [ kbps [burst-size] | hardware-drop-all ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| multicast |
Configure IP multicast global parameters |
| rpf-meter |
RPF-failed meter |
| kbps |
Type: uinteger min: 8 max: 0 default: 100 Rate in kilobits/sec |
| burst-size |
Type: uinteger min: 100 max: 0 default: 100 Burst size in kilobytes |
| hardware-drop-all |
Drop all RPF-failed packets in hardware |
[no] ip name-server { { ipv4_0 | ipv6_1 } [ { ipv4_2 | ipv6_3 } [ { ipv4_4 | ipv6_5 } [ { ipv4_6 | ipv6_7 } [ { ipv4_8 | ipv6_9 } [ ipv4_10 | ipv6_11 ] ] ] ] ] | { ipv4_12 | ipv6_13 } [ use-vrf { vrf-name | vrf-known-name } ] | { ipv4_14 | ipv6_15 } [ { ipv4_16 | ipv6_17 } [ use-vrf { vrf-name | vrf-known-name } ] ] | { ipv4_18 | ipv6_19 } [ { ipv4_20 | ipv6_21 } [ { ipv4_22 | ipv6_23 } [ use-vrf { vrf-name | vrf-known-name } ] ] ] | { ipv4_24 | ipv6_25 } [ { ipv4_26 | ipv6_27 } [ { ipv4_28 | ipv6_29 } [ { ipv4_30 | ipv6_31 } [ use-vrf { vrf-name | vrf-known-name } ] ] ] ] | { ipv4_32 | ipv6_33 } [ { ipv4_34 | ipv6_35 } [ { ipv4_36 | ipv6_37 } [ { ipv4_38 | ipv6_39 } [ { ipv4_40 | ipv6_41 } [ use-vrf { vrf-name | vrf-known-name } ] ] ] ] ] | { ipv4_42 | ipv6_43 } [ { ipv4_44 | ipv6_45 } [ { ipv4_46 | ipv6_47 } [ { ipv4_48 | ipv6_49 } [ { ipv4_50 | ipv6_51 } [ { ipv4_52 | ipv6_53 } [ use-vrf { vrf-name | vrf-known-name } ] ] ] ] ] ] }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| name-server |
Specify nameserver address |
| ipv4_0 |
Type: ipaddr Enter an IPv4 address |
| ipv6_1 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_2 |
Type: ipaddr Enter an IPv4 address |
| ipv6_3 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_4 |
Type: ipaddr Enter an IPv4 address |
| ipv6_5 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_6 |
Type: ipaddr Enter an IPv4 address |
| ipv6_7 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_8 |
Type: ipaddr Enter an IPv4 address |
| ipv6_9 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_10 |
Type: ipaddr Enter an IPv4 address |
| ipv6_11 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_12 |
Type: ipaddr Enter an IPv4 address |
| ipv6_13 |
Type: ipv6addr Enter an IPv6 address |
| use-vrf |
Display per-VRF information |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 64 VRF name |
| vrf-known-name |
Type: vrf length: 64 Known VRF name |
| ipv4_14 |
Type: ipaddr Enter an IPv4 address |
| ipv6_15 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_16 |
Type: ipaddr Enter an IPv4 address |
| ipv6_17 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_18 |
Type: ipaddr Enter an IPv4 address |
| ipv6_19 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_20 |
Type: ipaddr Enter an IPv4 address |
| ipv6_21 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_22 |
Type: ipaddr Enter an IPv4 address |
| ipv6_23 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_24 |
Type: ipaddr Enter an IPv4 address |
| ipv6_25 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_26 |
Type: ipaddr Enter an IPv4 address |
| ipv6_27 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_28 |
Type: ipaddr Enter an IPv4 address |
| ipv6_29 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_30 |
Type: ipaddr Enter an IPv4 address |
| ipv6_31 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_32 |
Type: ipaddr Enter an IPv4 address |
| ipv6_33 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_34 |
Type: ipaddr Enter an IPv4 address |
| ipv6_35 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_36 |
Type: ipaddr Enter an IPv4 address |
| ipv6_37 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_38 |
Type: ipaddr Enter an IPv4 address |
| ipv6_39 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_40 |
Type: ipaddr Enter an IPv4 address |
| ipv6_41 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_42 |
Type: ipaddr Enter an IPv4 address |
| ipv6_43 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_44 |
Type: ipaddr Enter an IPv4 address |
| ipv6_45 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_46 |
Type: ipaddr Enter an IPv4 address |
| ipv6_47 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_48 |
Type: ipaddr Enter an IPv4 address |
| ipv6_49 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_50 |
Type: ipaddr Enter an IPv4 address |
| ipv6_51 |
Type: ipv6addr Enter an IPv6 address |
| ipv4_52 |
Type: ipaddr Enter an IPv4 address |
| ipv6_53 |
Type: ipv6addr Enter an IPv6 address |
[no] ip ospf advertise-subnet
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| advertise-subnet |
Advertise loopback interface IP subnet in router LSA |
ip ospf authentication-key key | no ip ospf authentication-key [key]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| authentication-key |
Configure the authentication key for the interface |
| key |
Type: password Authentication key |
[no] ip ospf authentication [ message-digest | null ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| authentication |
Authentication on the interface |
| message-digest |
Use message-digest authentication |
| null |
Use null(disable) authentication |
ip ospf authentication key-chain keychain | no ip ospf authentication key-chain [keychain]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| authentication |
Authentication on the interface |
| key-chain |
Authentication password key-chain |
| keychain |
Type: string length: 63 Key-chain name |
[no] ip ospf bfd [disable]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| bfd |
Enable BFD on this interface |
| disable |
Disable BFD on this interface |
ip ospf cost cost | no ip ospf cost [cost]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| cost |
Cost associated with interface |
| cost |
Type: integer min: 1 max: 65535 Cost value |
ip ospf dead-interval interval | no ip ospf dead-interval [interval]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| dead-interval |
Dead interval |
| interval |
Type: integer min: 1 max: 262140 default: 40 (seconds) |
ip ospf event-history cli size { size_in_text | size_in_Kbytes }
| ip |
IP events |
| ospf |
Debug OSPF events |
| event-history |
log debug events into event history buffer |
| cli |
Cli logs |
| size |
Configure the size of the event-hist buffer |
| size_in_text |
Buffer size default: medium
|
| size_in_Kbytes |
Type: uinteger Size of the file in kbytes |
ip ospf event-history detail size { size_in_text | size_in_Kbytes }
| ip |
IP events |
| ospf |
Debug OSPF events |
| event-history |
log debug events into event history buffer |
| detail |
Detailed event history buffer |
| size |
Configure the size of the verbose event-hist buffer |
| size_in_text |
Buffer size default: small
|
| size_in_Kbytes |
Type: uinteger Size of the file in kbytes |
ip ospf event-history { adjacency | event | ha | flooding | lsa | spf | redistribution | ldp | te | rib | hello | spf-trigger } size { size_in_text | size_in_Kbytes }
| ip |
IP events |
| ospf |
Debug OSPF events |
| event-history |
log debug events into event history buffer |
| adjacency |
Adjacency formation logs |
| event |
Internal event logs |
| ha |
HA and GR logs |
| flooding |
LSA flooding logs |
| lsa |
LSA generation and databse logs |
| spf |
SPF calculation logs |
| redistribution |
Redistribution logs |
| ldp |
LDP related logs |
| te |
MPLS TE related logs |
| rib |
RIB related logs |
| hello |
HELLO related logs |
| spf-trigger |
SPF TRIGGER related logs |
| size |
Configure the size of the event-hist buffer |
| size_in_text |
Buffer size default: small
|
| size_in_Kbytes |
Type: uinteger Size of the file in kbytes |
[no] ip ospf flood-bw-percentage percentage
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| flood-bw-percentage |
Percentage of bandwidth used for flooding |
| percentage |
Type: integer min: 1 max: 25 Negate a command or set its defaults |
ip ospf hello-interval interval | no ip ospf hello-interval [interval]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| hello-interval |
Hello interval |
| interval |
Type: integer min: 1 max: 65535 default: 10 (seconds) |
ip ospf message-digest-key keyid md5 key | no ip ospf message-digest-key keyid [ md5 key ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| message-digest-key |
Message digest authentication password (key) |
| keyid |
Type: integer min: 1 max: 255 Key ID |
| md5 |
Use MD5 algorithm |
| key |
Type: password The OSPF password (key) |
[no] ip ospf mtu-ignore
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| mtu-ignore |
Disable OSPF MTU mismatch detection |
ip ospf network { broadcast | point-to-point } | no ip ospf network [ broadcast | point-to-point ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| network |
Network type |
| broadcast |
Specify OSPF broadcast multi-access network |
| point-to-point |
Specify OSPF point-to-point network |
ip ospf network point-to-point | no ip ospf network [point-to-point]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| network |
Network type |
| point-to-point |
Specify OSPF point-to-point network |
[ default | no ] ip ospf passive-interface
| default |
Undo a command |
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| passive-interface |
Suppress routing updates on the interface |
ip ospf priority prio | no ip ospf priority [prio]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| priority |
Router priority |
| prio |
Type: integer min: 0 max: 255 default: 1 Router priority |
ip ospf retransmit-interval interval | no ip ospf retransmit-interval [interval]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| retransmit-interval |
Packet retransmission interval |
| interval |
Type: integer min: 1 max: 65535 default: 5 (seconds) |
[no] ip ospf shutdown
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| shutdown |
shutdown ospf on this interface |
ip ospf transmit-delay delay | no ip ospf transmit-delay [delay]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ospf |
OSPF configuration commands |
| transmit-delay |
Packet transmission delay |
| delay |
Type: integer min: 1 max: 450 default: 1 (seconds) |
[no] ip pim anycast-rp anycast-rp rp-addr
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| anycast-rp |
Configure an RP in an Anycast-RP set (using PIM) |
| anycast-rp |
Type: ipaddr Address for the Anycast-RP address |
| rp-addr |
Type: ipaddr Address of RP in the Anycast-RP set |
ip pim assert-rate-limit rate | no ip pim assert-rate-limit [rate]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| assert-rate-limit |
Rate limit for PIM Asserts |
| rate |
Type: uinteger min: 1 max: 65535 Packets per second |
ip pim auto-rp { listen | forward } + | no ip pim auto-rp { listen | forward } +
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| auto-rp |
Auto-RP protocol RP-distribution configuration |
| listen |
Listen to Auto-RP messages |
| forward |
Forward Auto-RP messages |
ip pim auto-rp mapping-agent-policy { route-map-name | rtr_pol_name } | no ip pim auto-rp mapping-agent-policy [ route-map-name | rtr_pol_name ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| auto-rp |
Auto-RP protocol RP-distribution configuration |
| mapping-agent-policy |
Specify policy for filtering Mapping Agent messages |
| route-map-name |
Type: string length: 63 A route-map name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
ip pim auto-rp rp-candidate-policy { route-map-name | rtr_pol_name } | no ip pim auto-rp rp-candidate-policy [ route-map-name | rtr_pol_name ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| auto-rp |
Auto-RP protocol RP-distribution configuration |
| rp-candidate-policy |
Specify policy for filtering RP candidate messages |
| route-map-name |
Type: string length: 63 A route-map name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
ip pim { auto-rp rp-candidate | send-rp-announce } { interface | ipaddr } { group-list prefix | route-map route-map-name | prefix-list prefix-list-name } { [ scope ttl ] | [ interval interval ] | [bidir] } + | no ip pim { auto-rp rp-candidate | send-rp-announce } [ interface | ipaddr ] [ group-list prefix | route-map route-map-name | prefix-list prefix-list-name ] { [ scope ttl ] | [ interval interval ] | [bidir] }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| auto-rp |
Auto-RP protocol RP-distribution configuration |
| send-rp-announce |
Configures router to send Auto-RP Announce messages |
| rp-candidate |
Configures router to be an Auto-RP candidate RP |
| interface |
Type: interface Use IP address of interface for Auto-RP Announce messages |
| ipaddr |
Type: ipaddr IP address of RP for group |
| group-list |
Group range list |
| prefix |
Type: ipprefix Prefix of group range |
| route-map |
Group range policy for Auto-RP Candidate RP |
| route-map-name |
Type: string length: 63 route-map name |
| prefix-list |
Prefix List policy for Auto-RP Candidate RP |
| prefix-list-name |
Type: string length: 63 prefix-list name |
| scope |
Configure the scope of Auto-RP Announce messages |
| ttl |
Type: integer min: 1 max: 255 default: 32 TTL value for scope |
| interval |
Auto-RP Announce message transmission interval |
| interval |
Type: integer min: 1 max: 0 default: 60 Interval in seconds |
| bidir |
Group range advertised in PIM bidirectional mode |
ip pim { auto-rp mapping-agent | send-rp-discovery } interface [ scope ttl ] | no ip pim { auto-rp mapping-agent | send-rp-discovery } [interface] [ scope ttl ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| auto-rp |
Auto-RP protocol RP-distribution configuration |
| send-rp-discovery |
Configures router to send Auto-RP Discovery messages |
| mapping-agent |
Configures router as an Auto-RP RP-mapping agent |
| interface |
Type: interface Use IP address of interface for Auto-RP Announce messages |
| scope |
Configure the scope of Auto-RP Discovery messages |
| ttl |
Type: integer min: 1 max: 255 default: 32 TTL value for scope |
[no] ip pim bfd-instance [disable]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM interface configuration commands |
| bfd-instance |
Configures BFD on interface |
| disable |
Disable BFD on interface |
[no] ip pim bfd
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| bfd |
Enable / Disable BFD for all PIM interfaces in the VRF |
[no] ip pim border
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM interface configuration commands |
| border |
Configures interface to be a boundary of a PIM domain |
ip pim [bsr] bsr-candidate interface [ hash-len hash-len ] [ priority priority ] | no ip pim [bsr] bsr-candidate [interface] [ hash-len hash-len ] [ priority priority ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| bsr |
Bootstrap protocol RP-distribution configuration |
| bsr-candidate |
Configure router as a Bootstrap Router candidate |
| interface |
Type: interface Use IP address of interface for Bootstrap messages |
| hash-len |
Hash mask length used in Bootstrap messages |
| hash-len |
Type: integer min: 0 max: 32 default: 30 Hash mask length value |
| priority |
BSR priority used in Bootstrap messages |
| priority |
Type: integer min: 64 max: 0 BSR priority value |
ip pim bsr bsr-policy { route-map-name | rtr_pol_name } | no ip pim bsr bsr-policy [ route-map-name | rtr_pol_name ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| bsr |
Bootstrap protocol RP-distribution configuration |
| bsr-policy |
Specify policy for filtering BSR messages |
| route-map-name |
Type: string length: 63 A route-map name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
ip pim bsr { listen | forward } + | no ip pim bsr { listen | forward } +
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| bsr |
Bootstrap protocol RP-distribution configuration |
| listen |
Listen to Bootstrap/Candidate-RP messages |
| forward |
Forward Bootstrap/Candidate-RP messages |
ip pim [bsr] rp-candidate interface { group-list prefix | route-map route-map-name | prefix-list prefix-list-name } [ priority priority ] [ interval interval ] [bidir] | no ip pim [bsr] rp-candidate [interface] [ group-list prefix ] [ route-map route-map-name ] [ prefix-list prefix-list-name ] [ priority priority ] [ interval interval ] [bidir]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| bsr |
Bootstrap protocol RP-distribution configuration |
| rp-candidate |
Configure router as a Rendezvous Point (RP) candidate |
| interface |
Type: interface Use IP address of interface for Candidate-RP messages |
| group-list |
Group range list |
| prefix |
Type: ipprefix Prefix of group range |
| route-map |
Group range policy for Candidate RP |
| route-map-name |
Type: string length: 63 route-map name |
| prefix-list |
Prefix List policy for Candidate RP |
| prefix-list-name |
Type: string length: 63 prefix-list name |
| priority |
RP priority used in Candidate-RP messages |
| priority |
Type: integer min: 0 max: 0 default: 192 RP priority value |
| interval |
Bootstrap message transmission interval |
| interval |
Type: integer min: 1 max: 0 default: 60 Interval in seconds |
| bidir |
Group range advertised in PIM bidirectional mode |
ip pim bsr rp-candidate-policy { route-map-name | rtr_pol_name } | no ip pim bsr rp-candidate-policy [ route-map-name | rtr_pol_name ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| bsr |
Bootstrap protocol RP-distribution configuration |
| rp-candidate-policy |
Specify policy for filtering RP candidate messages |
| route-map-name |
Type: string length: 63 A route-map name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
[no] ip pim df-offer-burst-interval burst-interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| df-offer-burst-interval |
Interval between DF offer bursts |
| burst-interval |
Type: uinteger min: 1 max: 10000 default: 20 Interval in milliseconds |
ip pim dr-priority priority | no ip pim dr-priority [priority]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM interface configuration commands |
| dr-priority |
Configures priority for PIM DR election on interface |
| priority |
Type: uinteger min: 1 max: 0 default: 1 Priority value |
[no] ip pim event-history assert-receive size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| event-history |
Configure event-history buffer |
| assert-receive |
Assert receive events for PIM |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip pim event-history cli size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| event-history |
Configure event-history buffer |
| cli |
CLI events for PIM |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip pim event-history hello size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| event-history |
Configure event-history buffer |
| hello |
Hello events for PIM |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip pim event-history join-prune size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| event-history |
Configure event-history buffer |
| join-prune |
Join Prune events for PIM |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip pim event-history join-prune-summary size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| event-history |
Configure event-history buffer |
| join-prune-summary |
JoinPrune-Summary for PIM |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip pim event-history mvpn size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
Configure PIM event history |
| event-history |
Configure event-history buffer |
| mvpn |
MVPN events for PIM Not available in this release. |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip pim event-history null-register size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| event-history |
Configure event-history buffer |
| null-register |
Null register events for PIM |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip pim event-history packet size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| event-history |
Configure event-history buffer |
| packet |
Packet events for PIM |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip pim event-history pim-internal size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| event-history |
Configure event-history buffer |
| pim-internal |
Internal events for PIM |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip pim event-history rp size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| event-history |
Configure event-history buffer |
| rp |
RP events for PIM |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip pim event-history vpc size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
Configure PIM event history |
| event-history |
Configure event-history buffer |
| vpc |
vPC events for PIM |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip pim event-history vrf size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| event-history |
Configure event-history buffer |
| vrf |
VRF events for PIM |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip pim file-debug
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| file-debug |
Collect all debugs to a file |
[no] ip pim flush-routes
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| flush-routes |
Remove routes when restarting PIM |
ip pim hello-authentication ah-md5 auth-key | no ip pim hello-authentication ah-md5 [auth-key]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM interface configuration commands |
| hello-authentication |
Add AH header option to Hellos |
| ah-md5 |
Use MD5 HMAC |
| auth-key |
Type: password MD5 authentication key |
ip pim hello-interval interval | no ip pim hello-interval [interval]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM interface configuration commands |
| hello-interval |
Configures the Hello interval for interface |
| interval |
Type: uinteger min: 1 max: 18724286 default: 30000 Interval in milliseconds |
ip pim jp-delay delay | no ip pim jp-delay [delay]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| jp-delay |
Join-Prune message inter-packet delay |
| delay |
Type: uinteger min: 1 max: 0 default: 100 Delay value in microseconds |
[no] ip pim jp-interval interval
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM interface configuration commands |
| jp-interval |
Join-Prune interval used between peers |
| interval |
Type: uinteger min: 60 max: 65520 default: 60 Interval in seconds |
ip pim jp-policy { route-map-name | prefix-list prefix-list-name } [ in | out ] | no ip pim jp-policy { route-map-name | prefix-list prefix-list-name } [ in | out ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM interface configuration commands |
| jp-policy |
Specify policy for receiving Join-Prune messages |
| route-map-name |
Type: string length: 63 route-map name |
| prefix-list |
Prefix List policy for static RP |
| prefix-list-name |
Type: string length: 63 prefix-list name |
| in |
Inbound |
| out |
Outbound |
[no] ip pim log-neighbor-changes
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| log-neighbor-changes |
Log up/down PIM neighbor transitions |
[no] ip pim mtu size
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| mtu |
MTU for IP PIM packet |
| size |
Type: uinteger min: 1500 max: 65536 default: 1500 MTU |
ip pim neighbor-policy { route-map-name | prefix-list prefix-list-name } | no ip pim neighbor-policy [ route-map-name | prefix-list prefix-list-name ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM interface configuration commands |
| neighbor-policy |
Configures a neighbor policy for filtering adjacencies |
| route-map-name |
Type: string length: 63 route-map name |
| prefix-list |
Prefix List policy for neighbor |
| prefix-list-name |
Type: string length: 63 prefix-list name |
ip pim null-reg-delay delay | no ip pim null-reg-delay [delay]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| null-reg-delay |
Null registers inter-batch delay |
| delay |
Type: uinteger min: 1 max: 50000 Delay value in microseconds |
ip pim null-reg-routes num | no ip pim null-reg-routes [num]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| null-reg-routes |
Null registers number of routes |
| num |
Type: uinteger min: 1 max: 32000 Numerical value |
ip pim pre-build-spt | no ip pim pre-build-spt
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| pre-build-spt |
Pre construct PIM trees for all known (S,G)s |
ip pim register-policy { route-map-name | prefix-list prefix-list-name } | no ip pim register-policy [ route-map-name | prefix-list prefix-list-name ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| register-policy |
Specify policy for receiving Register messages |
| route-map-name |
Type: string length: 63 A route-map name |
| prefix-list |
Prefix List policy for Registers |
| prefix-list-name |
Type: string length: 63 prefix-list name |
ip pim register-rate-limit rate | no ip pim register-rate-limit [rate]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| register-rate-limit |
Rate limit for PIM data registers |
| rate |
Type: uinteger min: 1 max: 65535 Packets per second |
[no] ip pim register-replicate
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| register-replicate |
Enable software replication of decapsulated PIM Register packets |
ip pim register-source src-interface | no ip pim register-source [src-interface]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| register-source |
Configure source address for Register messages |
| src-interface |
Type: interface Use IP address of this interface for Register messages |
[no] ip pim register-until-stop
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| register-until-stop |
Send Data Registers till Register Stop is received |
ip pim rp-address rp-address [ group-list prefix | route-map route-map-name | prefix-list prefix-list-name ] [bidir] [override] | no ip pim rp-address rp-address [ group-list prefix | route-map route-map-name | prefix-list prefix-list-name ] [bidir] [override]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| rp-address |
Configure static RP for group range |
| rp-address |
Type: ipaddr IP address of router which is RP for group range |
| group-list |
Group range for static RP |
| prefix |
Type: ipprefix Group range prefix |
| route-map |
Route Map policy for static RP |
| route-map-name |
Type: string length: 63 route-map name |
| prefix-list |
Prefix List policy for static RP |
| prefix-list-name |
Type: string length: 63 prefix-list name |
| bidir |
Group range is treated in PIM bidirectional mode |
| override |
RP address will override the dynamically learnt RPs |
ip pim sparse-mode | no ip pim [sparse-mode]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM interface configuration commands |
| sparse-mode |
Configures sparse-mode PIM on interface |
ip pim [sparse] sg-expiry-timer { expiry-time | infinity } [ sg-list route-map-name | prefix-list prefix-list-name ] | no ip pim [sparse] sg-expiry-timer { expiry-time | infinity } [ sg-list route-map-name | prefix-list prefix-list-name ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| sparse |
PIM ASM |
| sg-expiry-timer |
Adjust expiry time for PIM ASM (S,G) routes |
| expiry-time |
Type: uinteger min: 181 max: 604800 default: 180 Expiry timer interval in seconds |
| infinity |
Never expire (S,G) route due to data inactivity |
| sg-list |
Specifies route-map for (S,G)s to apply the expiry timer |
| route-map-name |
Type: string length: 100 Route-map name |
| prefix-list |
Specifies prefix-list for (S,G)s to apply the expiry timer |
| prefix-list-name |
Type: string length: 63 prefix-list name |
ip pim ssm { range { group | + | none } | route-map route-map-name | prefix-list prefix-list-name } | no ip pim ssm { range { group | + | none } | route-map route-map-name | prefix-list prefix-list-name }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| ssm |
Source Specific Multicast (SSM) groups |
| range |
Configure explicit group ranges |
| group |
Type: ipprefix List of group range prefixes |
| route-map |
Group range route-map policy for SSM range |
| route-map-name |
Type: string length: 63 A route-map name |
| prefix-list |
Group range prefix-list policy for SSM range |
| prefix-list-name |
Type: string length: 63 A prefix-list name |
| none |
Remove all SSM group ranges |
ip pim state-limit max-states [ reserved route-map-name max-reserved ] | no ip pim state-limit [ max-states [ reserved route-map-name max-reserved ] ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| state-limit |
Configures State limit |
| max-states |
Type: uinteger min: 1 max: 4294967295 Maximum (*,G)/(S,G) entries allowed in this VRF |
| reserved |
Configures Reserved limit |
| route-map-name |
Type: string length: 100 Route-map name |
| max-reserved |
Type: uinteger min: 1 max: 4294967295 Maximum reserved (*,G)/(S,G) entries allowed in this VRF |
ip pim { use-shared-tree-only | spt-threshold infinity } group-list { route-map-name | prefix-list prefix-list-name } | { no ip pim { use-shared-tree-only | spt-threshold infinity } group-list route-map-name | prefix-list prefix-list-name }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| pim |
PIM global configuration commands |
| use-shared-tree-only |
Use (*,G) only state, no source state is created |
| spt-threshold |
Source-tree switching threshold |
| infinity |
Never switch to source-tree |
| group-list |
Specify group ranges through policy |
| route-map-name |
Type: string length: 63 route-map name |
| prefix-list |
Prefix List policy |
| prefix-list-name |
Type: string length: 63 prefix-list name |
| route-map-name |
Type: string length: 100 Route-map name |
[no] ip port-unreachable
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| port-unreachable |
Enable sending ICMP port-unreachable |
[no] ip port access-group name inout
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| port |
Port policy |
| access-group |
Specify access control for packets |
| name |
Type: string length: 64 List name |
| inout |
Traffic direction
|
ip prefix-list ipv4-pfl-name description line | no ip prefix-list ipv4-pfl-name description
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| prefix-list |
Build a prefix list |
| ipv4-pfl-name |
Type: string pattern: [!-~]* length: 63 Name of prefix-list |
| ipv4-pfl-name |
Type: string Known prefix-list name |
| description |
Description of the IP prefix list |
| line |
Type: remainder IP prefix-list description string |
ip prefix-list ipv4-pfl-name [ seq seq ] { permit | deny } prefix { [ eq equal ] | [ ge greater ] [ le lesser ] } | no ip prefix-list { ipv4-pfl-name | ipv4-pfl-name } [ seq seq ] [ { permit | deny } prefix { [ eq equal ] | [ ge greater ] [ le lesser ] } ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| prefix-list |
Build a prefix list |
| ipv4-pfl-name |
Type: string pattern: [!-~]* length: 63 Name of prefix-list |
| ipv4-pfl-name |
Type: string pattern: [!-~]* length: 63 Name of prefix-list |
| ipv4-pfl-name |
Type: string Known prefix-list name |
| seq |
Sequence number of an entry |
| seq |
Type: uinteger min: 1 max: 4294967294 Sequence number |
| permit |
Specify routes to forward |
| deny |
Specify routes to reject |
| prefix |
Type: ipprefix IP prefix network/length, e.g., 35.0.0.0/8 |
| eq |
Exact prefix length to be matched |
| equal |
Type: integer min: 1 max: 32 Exact prefix length |
| ge |
Minimum prefix length to be matched |
| greater |
Type: integer min: 1 max: 32 Minimum prefix length |
| le |
Maximum prefix length to be matched |
| lesser |
Type: integer min: 1 max: 32 Maximum prefix length |
ip proxy-arp | no ip proxy-arp
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| proxy-arp |
Configure proxy ARP |
ip redirects | no ip redirects
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| redirects |
Send ICMP Redirect messages |
ip rip authentication key-chain keychain | no ip rip authentication key-chain [keychain]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rip |
RIP configuration commands |
| authentication |
Authentication control |
| key-chain |
Set authentication key-chain |
| keychain |
Type: string Name of key-chain |
ip rip authentication mode { text | md5 } | no ip rip authentication mode [ text | md5 ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rip |
RIP configuration commands |
| authentication |
RIP authentication control |
| mode |
Set authentication mode |
| text |
Clear text authentication |
| md5 |
Keyed message digest |
[no] ip rip summary-address ip-prefix | no ipv6 rip summary-address ipv6-prefix | ipv6 rip summary-address ipv6-prefix
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| ipv6 |
Configure IPv6 features |
| rip |
RIP configuration commands |
| summary-address |
RIP summarization address |
| ipv6-prefix |
Type: ipv6prefix Exact prefix |
| ip-prefix |
Type: ipprefix Exact prefix |
[no] ip route { ip-addr ip-mask | ip-prefix } { interface | { pin-interface next-hop | { next-hop | nh-prefix } | vlan-interface } [ vrf { vrf-name | vrf-known-name } ] } [ name rt-name ] [ tag tag-value | pref ] +
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| route |
Route information |
| ip-addr |
Type: ipaddr IP prefix in format i.i.i.i |
| ip-mask |
Type: ipaddr IP network mask in format m.m.m.m |
| ip-prefix |
Type: ipprefix IP prefix and network mask length in format x.x.x.x/m |
| pin-interface |
Type: interface Pin interface |
| next-hop |
Type: ipaddr IP next-hop address in format i.i.i.i |
| nh-prefix |
Type: ipprefix IP next-hop prefix in format i.i.i.i/m |
| interface |
Type: interface Interface for interface static routes |
| vlan-interface |
Type: interface vlan interface |
| name |
Specify name of the next hop |
| rt-name |
Type: string length: 50 Name of next hop |
| pref |
Type: integer min: 1 max: 255 default: 1 Route preference |
| tag |
Supply tag value with static route |
| tag-value |
Type: uinteger min: 0 max: 0 default: 0 32-bit value for tag |
| vrf |
VRF for next-hop if different from this vrf |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name |
Type: vrf Known VRF name |
[no] ip route static bfd pin-interface next-hop
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| route |
Route information |
| static |
Static route based configuration |
| bfd |
Enable bfd detection on static route |
| pin-interface |
Type: interface Interface on which bfd has to be enabled |
| next-hop |
Type: ipaddr IP next-hop address in format i.i.i.i |
[no] ip router isis tag
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| router |
Enable a routing process |
| isis |
Intermediate System to Intermediate System (IS-IS) |
| tag |
Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Process tag |
[no] ip router ospf tag area { area-id-ip | area-id-int } [ secondaries none ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| router |
Enable a routing process |
| ospf |
OSPF configuration commands |
| tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
| area |
Area associated with interface |
| area-id-ip |
Type: ipaddr OSPF area ID in IP address format |
| area-id-int |
Type: uinteger min: 0 max: 4294967295 OSPF area ID as a decimal format |
| secondaries |
Do not include secondary IP addresses |
| none |
Do not include secondary IP addresses |
[no] ip router ospf tag multi-area area-id-ip
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| router |
Enable a routing process |
| ospf |
OSPF configuration commands |
| tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
| multi-area |
Multi area associated with interface |
| area-id-ip |
Type: ipaddr Area Id as an integer or ip address |
[no] ip routing event-history { urib-event-hist | urib-event-hist-hid } size { size_in_text | size_in_bytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| routing |
Routing information |
| event-history |
Configure routing event log |
| urib-event-hist |
Type: string Configure routing event log |
| urib-event-hist-hid |
Type: string Configure routing event log |
| size |
Size of buffer |
| size_in_text |
Buffer size default: medium
|
| size_in_bytes |
Type: uinteger min: 0 max: 1048576 Enter an integer value for the event history buffer |
[no] ip routing multicast enforce-rpf
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| routing |
Configure routing information |
| multicast |
Configure multicast |
| enforce-rpf |
Enforce RPF Check |
[no] ip routing multicast event-history cli size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| routing |
Routing information |
| multicast |
Configure multicast |
| event-history |
Configure event history buffers |
| cli |
CLI events for MRIB |
| size |
Configure size |
| size_in_text |
Buffer size default: medium
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip routing multicast event-history mdt size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| routing |
Routing information |
| multicast |
Configure multicast |
| event-history |
Configure event history buffers |
| mdt |
MDT events for MRIB |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip routing multicast event-history mfdm-debugs size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| routing |
Routing information |
| multicast |
Configure multicast |
| event-history |
Configure event history buffers |
| mfdm-debugs |
MFDM debugs for MRIB |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip routing multicast event-history mfdm-events size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| routing |
Routing information |
| multicast |
Configure mfdm-stats event-history buffer |
| event-history |
Configure event history buffers |
| mfdm-events |
Non-periodic MFDM events in MRIB |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip routing multicast event-history mfdm-stats size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| routing |
Routing information |
| multicast |
Configure multicast |
| event-history |
Configure event history buffers |
| mfdm-stats |
MFDM-Stats events for MRIB |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip routing multicast event-history rib size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| routing |
Routing information |
| multicast |
Configure multicast |
| event-history |
Configure event-history buffers |
| rib |
RIB events for MRIB |
| size |
Configure size |
| size_in_text |
Buffer size default: large
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip routing multicast event-history rib-summary size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| routing |
Routing information |
| multicast |
Configure multicast |
| event-history |
Configure event-history buffers |
| rib-summary |
RIB events for MRIB-summary |
| size |
Configure size |
| size_in_text |
Buffer size default: large
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip routing multicast event-history vrf size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| routing |
Routing information |
| multicast |
Configure multicast |
| event-history |
Configure event history buffers |
| vrf |
VRF events for MRIB |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ip routing multicast software-replicate
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| routing |
Routing information |
| multicast |
Configure multicast |
| software-replicate |
Enable software replication of PIM ASM leak packets |
[no] ip rsvp
| 'no' |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rsvp |
RSVP configuration commands |
[no] ip rsvp authentication challenge
| 'no' |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rsvp |
RSVP configuration commands |
| authentication |
Configure RSVP neighbor cryptographic authentication |
| challenge |
Perform challenge/response handshake with new RSVP neighbors |
ip rsvp authentication key-chain key-chain-name | no ip rsvp authentication key-chain
| 'no' |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rsvp |
RSVP configuration commands |
| authentication |
Configure RSVP neighbor cryptographic authentication |
| key-chain |
Authentication password key-chain |
| key-chain-name |
Type: string Key-chain name |
[no] ip rsvp authentication lifetime time
| 'no' |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rsvp |
RSVP configuration commands |
| authentication |
Configure RSVP neighbor cryptographic authentication |
| lifetime |
Maximum lifetime of neighbor authentication state |
| time |
Type: integer min: 30 max: 86400 default: 1800 Lifetime value(in seconds) |
[no] ip rsvp authentication type { md5 | sha-1 }
| 'no' |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rsvp |
RSVP configuration commands |
| authentication |
Configure RSVP neighbor cryptographic authentication |
| type |
Type of authentication algorithm |
| md5 |
RSA Message Digest 5 hash algorithm (default) |
| sha-1 |
NIST Secure Hash Algorithm 1 |
[no] ip rsvp authentication window-size value
| 'no' |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rsvp |
RSVP configuration commands |
| authentication |
Configure RSVP neighbor cryptographic authentication |
| window-size |
Receive window size for authenticated messages |
| value |
Type: integer min: 1 max: 64 default: 1 Maximum number of messages allowed in receive window |
[no] ip rsvp signalling dscp value
| 'no' |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rsvp |
RSVP configuration commands |
| signalling |
Configure RSVP Signalling information |
| dscp |
Set DSCP for RSVP signalling messages |
| value |
Type: uinteger min: 0 max: 63 default: 48 DSCP value |
[no] ip rsvp signalling hello dscp value
| 'no' |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rsvp |
RSVP configuration commands |
| signalling |
Configure RSVP Signalling information |
| hello |
RSVP Hello configuration commands |
| dscp |
Set DSCP for RSVP hello messages |
| value |
Type: uinteger min: 0 max: 63 default: 48 DSCP value |
[no] ip rsvp signalling hello reroute [override-graceful]
| 'no' |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rsvp |
RSVP configuration commands |
| signalling |
Configure RSVP Signalling information |
| hello |
RSVP Hello configuration commands |
| reroute |
RSVP Reroute commands |
| override-graceful |
Ignore existence of GR node neighbor for pure HST behavior |
[no] ip rsvp signalling hello reroute state-timeout refresh interval value
| 'no' |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rsvp |
RSVP configuration commands |
| signalling |
Configure RSVP Signalling information |
| hello |
RSVP Hello configuration commands |
| reroute |
RSVP Reroute commands |
| state-timeout |
RSVP Hello State timeout configuration |
| refresh |
Configure RSVP Hello refresh behavior for Reroute |
| interval |
Time between sending Hello Requests for Reroute |
| value |
Type: integer min: 2000 max: 30000 default: 2000 Hello interval in msec |
[no] ip rsvp signalling hello reroute state-timeout refresh misses value
| 'no' |
Negate a command or set its defaults |
| ip |
Configure IP features |
| rsvp |
RSVP configuration commands |
| signalling |
Configure RSVP Signalling information |
| hello |
RSVP Hello configuration commands |
| reroute |
RSVP Reroute commands |
| state-timeout |
RSVP Hello State timeout configuration |
| refresh |
Configure RSVP Hello refresh behavior for Reroute |
| misses |
Number of Hello misses for Reroute |
| value |
Type: uinteger min: 4 max: 10 default: 4 Number of missed Hello Acks which triggers neighbor down |
[no] ip source-route
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| source-route |
IP source routing option |
[no] ip source binding ipaddr1 macaddr vlan vlanid interface interface1
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| source |
IP source |
| binding |
Static binding |
| ipaddr1 |
Type: ipaddr IP address |
| macaddr |
Type: ethernet MAC address |
| vlan |
VLAN |
| vlanid |
Type: vlan VLAN id |
| interface |
interface |
| interface1 |
Type: interface interface |
[no] ip source interface icmp-errors
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| source |
Configure source-address for applications |
| interface |
Type: interface Interface to pick source-address from |
| icmp-errors |
ICMP unreachable/TTL-exceeded/param-prob messages |
ip tcp path-mtu-discovery | no ip tcp path-mtu-discovery
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| tcp |
Global TCP parameters |
| path-mtu-discovery |
Enable path-MTU discovery on TCP |
no ip tcp synwait-time | ip tcp synwait-time time
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| tcp |
Global TCP parameters |
| synwait-time |
Set time to wait on new TCP connections |
| time |
Type: uinteger min: 5 max: 300 default: 30 Wait time |
[no] ip telnet source-interface ifnum [ vrf { vrf-name | vrf-known-name } ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| telnet |
Configure telnet |
| source-interface |
Configure source interface feature for domain-lookup |
| ifnum |
Type: interface Source interface |
| vrf |
Configure VRF |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name |
Type: vrf Known VRF name |
[no] ip tftp source-interface ifnum [ vrf { vrf-name | vrf-known-name } ]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| tftp |
Configure TFTP client |
| source-interface |
Configure source interface feature for TFTP client |
| ifnum |
Type: interface Source interface |
| vrf |
Configure VRF |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name |
Type: vrf Known VRF name |
[no] ip ttl ttl_value
| no |
Negate a command or set its defaults |
| ip |
Set ERSPAN IP options |
| ttl |
Set the IP time-to-live value |
| ttl_value |
Type: integer min: 1 max: 255 |
ip unnumbered interface | no ip unnumbered [interface]
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| unnumbered |
Configure interface as unnumbered |
| interface |
Type: interface Interface with IP address |
[no] ip unreachables
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| unreachables |
Enable sending ICMP unreachables (other than port-unreachable) |
[no] { platform | hardware } ip verify { address { source { broadcast | multicast } | class-e | destination zero | identical | reserved } | checksum | protocol | fragment | length { minimum | consistent | maximum { max-frag | udp | max-tcp } } | tcp tiny-frag | version | syslog }
| no |
Negate a command or set its defaults |
| platform |
Platform configuration commands |
| hardware |
Hardware Internal Information |
| ip |
IP |
| verify |
Enable IPv4 and some IPv6 packet validation checks in hardware Not available in this release. |
| address |
IPv4 Source and destination address validation |
| source |
Check source address Not available in this release. |
| broadcast |
Source address is 255.255.255.255 Not available in this release. |
| multicast |
Source address is 224.x.x.x Not available in this release. |
| destination |
Check destination address Not available in this release. |
| zero |
Destination address is 0.0.0.0 Not available in this release. |
| class-e |
Class E IDS check Not available in this release. |
| identical |
Same IP SA and DA |
| reserved |
Source address is 127.x.x.x Not available in this release. |
| checksum |
Verify IPv4 and IPv6 packet checksum Not available in this release. |
| protocol |
Verify IP procotol Not available in this release. |
| fragment |
Check IPv4 and IPv6 fragment with non-zero offset and DF bit active Not available in this release. |
| length |
Validate IPv4 packet header and payload length |
| minimum |
Minimum IPv4 header length Not available in this release. |
| consistent |
Actual frame size is equal to or more than IPv4 length plus ethernet header |
| maximum |
Check max fragment offset and payload length Not available in this release. |
| max-frag |
Fragment offset field value Not available in this release. |
| udp |
Maximum UDP length has to be less than IPv4 payload length Not available in this release. |
| max-tcp |
Maximum TCP length has to be less than IPv4 payload length Not available in this release. |
| tcp |
Validate TCP packet header |
| tiny-frag |
Check TCP tiny fragment |
| version |
Must be 4 for an ethertype of IPv4 (0x0800) Not available in this release. |
| syslog |
Syslog Messages logging configuration for IDS check drops Not available in this release. |
[no] ip verify source dhcp-snooping-vlan
| no |
Negate a command or set its defaults |
| ip |
Configure IP features |
| verify |
Configure Unicast Reverse Path Forwarding or IP Source Guard |
| source |
IP Source Guard related commands |
| dhcp-snooping-vlan |
Vlans on which snooping is enabled |
[no] ipv6 access-class name inout
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| access-class |
Specify IPv6 access control for packets |
| name |
Type: string length: 64 List name |
| inout |
Traffic direction
|
[no] ipv6 access-list name
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| access-list |
Configure access list |
| name |
Type: string length: 64 List name |
ipv6 adjacency [ vrf { vrf-name | vrf-known-name } ] { interface { * | ipv6-addr } | * } forcedownload
| ipv6 |
Configure IPv6 features |
| adjacency |
Configure Adjmgr |
| vrf |
Display per-VRF information |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name |
Type: vrf Known VRF name |
| interface |
Type: interface Display specific interface adjacencies only |
| ipv6-addr |
Type: ipv6addr IPV6 source address |
| * |
for all adjacencies in this context |
| forcedownload |
Create consistancy in UFDM |
[no] ipv6 adjacency [ vrf { vrf-name | vrf-known-name } ] { interface { * | ipv6-addr } | * } peer-gmac
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| adjacency |
Configure Adjmgr |
| vrf |
Display per-VRF information |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name |
Type: vrf Known VRF name |
| interface |
Type: interface Display specific interface adjacencies only |
| ipv6-addr |
Type: ipv6addr IPV6 source address |
| * |
for all adjacencies in this context |
| peer-gmac |
Set/clear the peer-gmac bit |
ipv6 adjacency route distance pref | no ipv6 adjacency route distance
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| adjacency |
Configure Adjmgr |
| route |
route |
| distance |
admin-distance |
| pref |
Type: uinteger min: 2 max: 250 default: 250 preference |
ipv6 pim { auto-rp mapping-agent | send-rp-discovery } interface [ scope ttl ] | no ipv6 pim { auto-rp mapping-agent | send-rp-discovery } [interface] [ scope ttl ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| auto-rp |
Auto-RP protocol RP-distribution configuration |
| pim |
PIM6 global configuration commands |
| send-rp-discovery |
Configures router to send Auto-RP Discovery messages |
| mapping-agent |
Configures router as an Auto-RP RP-mapping agent |
| interface |
Type: interface IPV6 address of interface for Auto-RP Announce messages |
| scope |
Configure the scope of Auto-RP Discovery messages |
| ttl |
Type: integer min: 1 max: 255 default: 32 TTL value for scope |
[no] ipv6 cache disable
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| cache |
Disable cache |
| disable |
Disable cache |
[no] ipv6 dhcp relay
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| dhcp |
Configure DHCPv6 relay |
| relay |
Configure DHCPv6 relay agent |
ipv6 dhcp relay address ip-addr-val [ use-vrf vrf-name ] [ interface interface-name ] | ipv6 dhcp relay address ip-addr-val [ interface interface-name ] [ use-vrf vrf-name ]
| ipv6 |
Configure IPv6 features |
| dhcp |
Configure DHCPv6 relay |
| relay |
Configure DHCPv6 relay agent |
| address |
Configure DHCPv6 server relay address |
| ip-addr-val |
Type: ipv6addr IPv6 server address |
| use-vrf |
server address VRF membership |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf length: 32 VRF name |
| interface |
Destination interface for the relay address |
| interface-name |
Type: interface Destination interface |
[no] ipv6 dhcp relay option type cisco
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| dhcp |
Configure DHCPv6 relay |
| relay |
DHCPv6 relay agent parameters |
| option |
Relay agent option |
| type |
Relay agent option type |
| cisco |
Use Cisco propritery options |
[no] ipv6 dhcp relay option vpn
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| dhcp |
Configure DHCPv6 relay |
| relay |
DHCPv6 relay agent parameters |
| option |
Insert DHCPv6 relay information in Relay forward |
| vpn |
Enable DHCPv6 relay support across VRFs |
ipv6 dhcp relay source-interface interface-name
| ipv6 |
Configure IPv6 features |
| dhcp |
Configure DHCPv6 relay |
| relay |
Configure DHCPv6 relay agent |
| source-interface |
Configure source interface for DHCPv6 relay |
| interface-name |
Type: interface Source interface |
{ [seqno] | no } { addr wild | prefix | host hostaddr }
| seqno |
Type: uinteger min: 1 max: 4294967295 Sequence number |
| no |
Negate a command or set its defaults |
| addr |
Type: ipv6addr IPv6 Network address of object-group member |
| wild |
Type: ipv6addr IPv6 wildcard |
| prefix |
Type: ipv6prefix IPv6 Network prefix of the object-group member |
| host |
Host address of the object-group member |
| hostaddr |
Type: ipv6addr IPv6 Host address |
[no] ipv6 host s0 ipv6_0
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| host |
Add an entry to the ip hostname table |
| s0 |
Type: string length: 64 Name of Host |
| ipv6_0 |
Type: ipv6addr Enter an IPv6 address |
ipv6 [icmp] adjacency-stale-timer stale-time | no ipv6 [icmp] adjacency-stale-timer [stale-time]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| icmp |
Configure icmp parameters |
| adjacency-stale-timer |
When probing for an adjacency begins |
| stale-time |
Type: uinteger min: 1380 max: 0 Seconds after adjacency uptime |
[no] ipv6 icmp vip ipv6-addr vmac mac-addr protocol prot group id
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| icmp |
ICMPv6 commands |
| vip |
Virtual IPv6 address |
| ipv6-addr |
Type: ipv6addr IPv6 address format: aaaa:bbbb:cccc:dddd:eeee:ffff:gggg:hhhh, aaaa::bbbb |
| vmac |
Virtual MAC address |
| mac-addr |
Type: ethernet Layer-2 MAC address |
| protocol |
FHRP protocol |
| prot |
Type: string HSRP VRRP GLBP |
| group |
Group id |
| id |
Type: uinteger Group id |
[no] ipv6 mroute ipv6-prefix { { next-hop | nh-prefix } | interface } [pref] [ vrf { vrf-name | vrf-known-name } ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| mroute |
Configure multicast RPF static route |
| ipv6-prefix |
Type: ipv6prefix IPv6 prefix in format x.x.x.x/m |
| next-hop |
Type: ipv6addr IPv6 next-hop address in format i.i.i.i |
| nh-prefix |
Type: ipv6prefix IPv6 next-hop prefix in format i.i.i.i/m |
| interface |
Type: interface Interface for interface static multicast routes |
| pref |
Type: integer min: 1 max: 255 default: 1 Route preference |
| vrf |
Display per-VRF information |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name |
Type: vrf Known VRF name |
ipv6 nd hop-limit hop-limit | no ipv6 nd hop-limit [hop-limit]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| hop-limit |
Sent in RA messages, tells hosts what hop-limit to use when originating IPv6 packets |
| hop-limit |
Type: uinteger min: 0 max: 255 default: 64 Hop limit in IPv6 header |
ipv6 nd limit-incomplete-adjacency count | no ipv6 nd limit-incomplete-adjacency [count]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| limit-incomplete-adjacency |
Number of incomplete adjacencies |
| count |
Type: uinteger min: 0 max: 65536 default: 32767 Count |
ipv6 nd limit_threshold_am_queue count | no ipv6 nd limit_threshold_am_queue [count]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| limit_threshold_am_queue |
Threshold AM queue |
| count |
Type: uinteger min: 20000 max: 50000 default: 20000 Count |
[no] ipv6 nd managed-config-flag
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| managed-config-flag |
Sent in RA messages, tells hosts to use stateful address auto-configuration to obtain address information |
ipv6 nd mtu mtu | no ipv6 nd mtu [mtu]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| mtu |
Sent in RA messages, tells hosts what MTU to use on this link |
| mtu |
Type: uinteger min: 1280 max: 0 default: 1500 MTU in bytes |
ipv6 nd ns-interval interval [retry-count] | no ipv6 nd ns-interval [interval]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| ns-interval |
Retransmission interval between sending Neighbor-Solicitation messages |
| interval |
Type: uinteger min: 1000 max: 3600000 default: 1000 Interval in milliseeconds |
| retry-count |
Type: uinteger min: 1 max: 100 default: 3 NS Retry count |
[no] ipv6 nd other-config-flag
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| other-config-flag |
Sent in RA messages, tells hosts to use stateful auto-configuration to obtain non-address related information |
ipv6 nd prefix { default | prefix } [ { val-life | infinite } { perf-life | infinite } [ [no-autoconfig] [no-onlink] [no-rtr-address] [off-link] ] | no-advertise ] | no ipv6 nd prefix { default | prefix }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| prefix |
IPv6 Prefix to advertise in RA |
| prefix |
Type: ipv6prefix IPv6 prefix x:x::y/<z> |
| default |
Specify prefix default parameters |
| val-life |
Type: uinteger Valid Lifetime (secs) |
| infinite |
Infinite Valid Lifetime |
| no-advertise |
Do not advertise prefix |
| perf-life |
Type: uinteger Preferred Lifetime (secs) |
| infinite |
Infinite Preferred Lifetime |
| no-autoconfig |
Do not use prefix for autoconfiguration |
| no-onlink |
Do not use prefix for onlink determination |
| no-rtr-address |
Do not send full router address in prefix advert |
| off-link |
Prefix is offlink |
[no] ipv6 nd process adjacency statistics
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| process |
Process Adjacency Statistics |
| adjacency |
Adjacency |
| statistics |
Statistics |
ipv6 nd ra-interval interval [ min min-interval ] | no ipv6 nd ra-interval [interval] [ min min-interval ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| ra-interval |
Interval between sending Router-Advertisement messages |
| interval |
Type: uinteger min: 4 max: 1800 default: 600 Interval in seconds |
| min |
Minimum interval between sending RA messages |
| min-interval |
Type: uinteger min: 0 max: 1800 Interval in seconds |
ipv6 nd ra-lifetime lifetime | no ipv6 nd ra-lifetime [lifetime]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| ra-lifetime |
Sent in RA messages, Router Lifetime of a default router, 0 means this router will not be the default router |
| lifetime |
Type: uinteger min: 0 max: 9000 Lifetime in seconds |
ipv6 nd reachable-time time | no ipv6 nd reachable-time [time]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| reachable-time |
Sent in RA messages, advertised time when a node considers a neighbor up after receiving a reachability confirmation |
| time |
Type: uinteger min: 0 max: 3600000 default: 0 Time in milliseconds |
ipv6 nd retrans-timer time | no ipv6 nd retrans-timer [time]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| retrans-timer |
Sent in RA messages, advertised time between NS messages |
| time |
Type: uinteger min: 0 max: 0 default: 0 Time in milliseconds |
[no] ipv6 nd suppress-ra [mtu]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| suppress-ra |
Disable sending Router-Advertisement messages |
| mtu |
Disable sending MTU in Router-Advertisement messages |
ipv6 nd synchronize [ pull | push ]
| ipv6 |
Configure IPv6 features |
| nd |
Display Neighbor Discovery interface information |
| synchronize |
CFS synchronize |
| pull |
Initiate CFS pull request |
| push |
Initiate CFS push message |
[no] ipv6 nd synchronize
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
Display Neighbor Discovery interface information |
| synchronize |
CFS synchronize Not available in this release. |
[no] ipv6 pim anycast-rp anycast-rp rp-addr
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| anycast-rp |
Configure an RP in an Anycast-RP set (using PIM6) |
| anycast-rp |
Type: ipv6addr Address for the Anycast-RP address |
| rp-addr |
Type: ipv6addr Address of RP in the Anycast-RP set |
ipv6 pim auto-rp { listen | forward } + | no ipv6 pim auto-rp { listen | forward } +
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| auto-rp |
Enable listening or forwarding of Auto-RP messages |
| listen |
Listen to Auto-RP messages |
| forward |
Forward Auto-RP messages |
ipv6 pim auto-rp mapping-agent-policy { route-map-name | rtr_pol_name } | no ipv6 pim auto-rp mapping-agent-policy [ route-map-name | rtr_pol_name ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| auto-rp |
Auto-RP protocol RP-distribution configuration |
| mapping-agent-policy |
Specify policy for filtering Mapping Agent messages |
| route-map-name |
Type: string length: 63 A route-map name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
ipv6 pim auto-rp rp-candidate-policy { route-map-name | rtr_pol_name } | no ipv6 pim auto-rp rp-candidate-policy [ route-map-name | rtr_pol_name ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| auto-rp |
Auto-RP protocol RP-distribution configuration |
| rp-candidate-policy |
Specify policy for filtering RP candidate messages |
| route-map-name |
Type: string length: 63 A route-map name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
ipv6 pim { auto-rp rp-candidate | send-rp-announce } interface { group-list prefix | route-map route-map-name } { [ scope ttl ] | [ interval interval ] | [bidir] } + | no ipv6 pim { auto-rp rp-candidate | send-rp-announce } [interface] [ group-list prefix ] [ route-map route-map-name ] { [ scope ttl ] | [ interval interval ] | [bidir] }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| auto-rp |
Auto-RP protocol RP-distribution configuration |
| send-rp-announce |
Configures router to send Auto-RP Announce messages |
| rp-candidate |
Configures router to be an Auto-RP candidate RP |
| interface |
Type: interface IPV6 address of interface for nnounce messages |
| group-list |
Group range list |
| prefix |
Type: ipv6prefix Prefix of group range |
| route-map |
Group range policy for Auto-RP Candidate RP |
| route-map-name |
Type: string length: 63 route-map name |
| scope |
Configure the scope of Auto-RP Announce messages |
| ttl |
Type: integer min: 1 max: 255 default: 32 TTL value for scope |
| interval |
Auto-RP Announce message transmission interval |
| interval |
Type: integer min: 1 max: 0 default: 60 Interval in seconds |
| bidir |
Group range advertised in PIM6 bidirectional mode |
[no] ipv6 pim bidir-rp-limit limit
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| bidir-rp-limit |
Configures maximum Bidir RPs for IPv6 PIM in this VRF |
| limit |
Type: integer min: 0 max: 8 default: 2 Set limit for Bidir RPs permitted in IPv6 PIM |
[no] ipv6 pim border
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 interface configuration commands |
| border |
Configures interface to be a boundary of a PIM6 domain |
ipv6 pim [bsr] bsr-candidate interface [ hash-len hash-len ] [ priority priority ] | no ipv6 pim [bsr] bsr-candidate [interface] [ hash-len hash-len ] [ priority priority ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| bsr |
Bootstrap protocol RP-distribution configuration |
| bsr-candidate |
Configure router as a Bootstrap Router candidate |
| interface |
Type: interface Use IPV6 address of interface for Bootstrap messages |
| hash-len |
Hash mask length used in Bootstrap messages |
| hash-len |
Type: integer min: 0 max: 128 default: 126 Hash mask length value |
| priority |
BSR priority used in Bootstrap messages |
| priority |
Type: integer min: 0 max: 0 default: 64 BSR priority value |
ipv6 pim bsr bsr-policy { route-map-name | rtr_pol_name } | no ipv6 pim bsr bsr-policy [ route-map-name | rtr_pol_name ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| bsr |
Bootstrap protocol RP-distribution configuration |
| bsr-policy |
Specify policy for filtering BSR messages |
| route-map-name |
Type: string length: 63 A route-map name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
ipv6 pim bsr { listen | forward } + | no ipv6 pim bsr { listen | forward } +
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| bsr |
Bootstrap protocol RP-distribution configuration |
| listen |
Listen to Bootstrap/Candidate-RP messages |
| forward |
Forward Bootstrap/Candidate-RP messages |
ipv6 pim [bsr] rp-candidate interface { group-list prefix | route-map route-map-name } [ priority priority ] [ interval interval ] [bidir] | no ipv6 pim [bsr] rp-candidate [interface] [ group-list prefix ] [ route-map route-map-name ] [ priority priority ] [ interval interval ] [bidir]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| bsr |
Bootstrap protocol RP-distribution configuration |
| rp-candidate |
Configure router as a Rendezvous Point (RP) candidate |
| interface |
Type: interface IPV6 address of interface for Candidate-RP messages |
| group-list |
Group range list |
| prefix |
Type: ipv6prefix Prefix of group range |
| route-map |
Group range policy for Candidate RP |
| route-map-name |
Type: string length: 63 route-map name |
| priority |
RP priority used in Candidate-RP messages |
| priority |
Type: integer min: 0 max: 0 default: 192 RP priority value |
| interval |
Bootstrap message transmission interval |
| interval |
Type: integer min: 1 max: 0 default: 60 Interval in seconds |
| bidir |
Group range advertised in PIM6 bidirectional mode |
ipv6 pim bsr rp-candidate-policy { route-map-name | rtr_pol_name } | no ipv6 pim bsr rp-candidate-policy [ route-map-name | rtr_pol_name ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| bsr |
Bootstrap protocol RP-distribution configuration |
| rp-candidate-policy |
Specify policy for filtering RP candidate messages |
| route-map-name |
Type: string length: 63 A route-map name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
ipv6 pim dr-priority priority | no ipv6 pim dr-priority [priority]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 interface configuration commands |
| dr-priority |
Configures priority for PIM6 DR election on interface |
| priority |
Type: uinteger min: 1 max: 0 default: 1 Priority value |
[no] ipv6 pim event-history assert-receive size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| event-history |
Configure event-history buffer |
| assert-receive |
Assert-receive events for PIM6 |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ipv6 pim event-history bidir size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| event-history |
Configure event-history buffer |
| bidir |
Bidir events for PIM6 |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ipv6 pim event-history hello size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| event-history |
Configure event-history buffer |
| hello |
Hello events for PIM6 |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ipv6 pim event-history join-prune size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| event-history |
Configure event-history buffer |
| join-prune |
Join/Prune events for PIM6 |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ipv6 pim event-history join-prune-summary size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| event-history |
Configure event-history buffer |
| join-prune-summary |
Join/Prune-Summary events for PIM6 |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ipv6 pim event-history null-register size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| event-history |
Configure event-history buffer |
| null-register |
Reg events for PIM6 |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ipv6 pim event-history packet size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| event-history |
Configure event-history buffer |
| packet |
Packet events for PIM6 |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ipv6 pim event-history pim6-internal size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| event-history |
Configure event-history buffer |
| pim6-internal |
Internal events for PIM6 |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ipv6 pim event-history rp size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| event-history |
Configure event-history buffer |
| rp |
RP events for PIM6 |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ipv6 pim event-history vrf size { size_in_text | size_in_kbytes }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| event-history |
Configure event-history buffer |
| vrf |
VRF events for PIM6 |
| size |
Configure size |
| size_in_text |
Buffer size default: small
|
| size_in_kbytes |
Type: integer Size in kbytes |
[no] ipv6 pim flush-routes
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| flush-routes |
Remove routes when restarting PIM6 |
ipv6 pim hello-authentication ah-md5 auth-key | no ipv6 pim hello-authentication ah-md5 [auth-key]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 interface configuration commands |
| hello-authentication |
Add AH header option to Hellos |
| ah-md5 |
Use MD5 HMAC |
| auth-key |
Type: password MD5 authentication key |
ipv6 pim hello-interval { interval-min | interval-max } | no ipv6 pim hello-interval [ interval-min | interval-max ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 interface configuration commands |
| hello-interval |
Configures the Hello interval for interface |
| interval-min |
Type: uinteger min: 1 max: 1000 Interval in milliseconds |
| interval-max |
Type: uinteger min: 1000 max: 18724286 default: 30000 Interval in milliseconds |
ipv6 pim jp-delay delay | no ipv6 pim jp-delay [delay]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| jp-delay |
Join-Prune message inter-packet delay |
| delay |
Type: uinteger min: 1 max: 0 default: 100 Delay value in microseconds |
ipv6 pim jp-policy { route-map-name | rtr_pol_name } [ in | out ] | no ipv6 pim jp-policy [ route-map-name | rtr_pol_name ] [ in | out ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 interface configuration commands |
| jp-policy |
Specify policy for receiving Join-Prune messages |
| route-map-name |
Type: string length: 63 A route-map name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
| in |
Inbound |
| out |
Outbound |
[no] ipv6 pim log-neighbor-changes
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| log-neighbor-changes |
Log up/down PIM6 neighbor transitions |
ipv6 pim neighbor-policy route-map-name | no ipv6 pim neighbor-policy [route-map-name]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 interface configuration commands |
| neighbor-policy |
Configures a neighbor policy for filtering adjacencies |
| route-map-name |
Type: string length: 63 A route-map name |
ipv6 pim register-policy { route-map-name | rtr_pol_name } | no ipv6 pim register-policy [ route-map-name | rtr_pol_name ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| register-policy |
Specify policy for receiving Register messages |
| route-map-name |
Type: string length: 63 A route-map name |
| rtr_pol_name |
Type: string An existing routing-rules policy |
ipv6 pim register-rate-limit rate | no ipv6 pim register-rate-limit [rate]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| register-rate-limit |
Rate limit for PIM data registers |
| rate |
Type: uinteger min: 1 max: 65535 Packets per second |
ipv6 pim rp-address rp-address [ group-list prefix | route-map route-map-name | prefix-list prefix-list-name ] [bidir] [override] | no ipv6 pim rp-address rp-address [ group-list prefix | route-map route-map-name | prefix-list prefix-list-name ] [bidir] [override]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| rp-address |
Configure static RP for group range |
| rp-address |
Type: ipv6addr IPV6 address of RP for group range |
| group-list |
Group range for static RP |
| prefix |
Type: ipv6prefix Prefix of group range |
| route-map |
Route Map policy for static RP |
| route-map-name |
Type: string length: 63 route-map name |
| prefix-list |
Prefix List policy for static RP |
| prefix-list-name |
Type: string length: 63 prefix-list name |
| bidir |
Group range is treated in PIM6 bidirectional mode |
| override |
Overrides the dynamically learnt RPs |
ipv6 pim sparse-mode | no ipv6 pim [sparse-mode]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 interface configuration commands |
| sparse-mode |
Configures sparse-mode PIMv6 on interface |
ipv6 pim ssm { range { group | + | none } | route-map route-map-name } | no ipv6 pim ssm { range { group | + | none } | route-map route-map-name }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| ssm |
Source Specific Multicast (SSM) groups |
| range |
Configure explicit group ranges |
| group |
Type: ipv6prefix List of group range prefixes |
| none |
Remove all SSM group ranges |
| route-map |
Group range policy for SSM range |
| route-map-name |
Type: string length: 63 A route-map name |
ipv6 pim state-limit max-states [ reserved route-map-name max-reserved ] | no ipv6 pim state-limit [ max-states [ reserved route-map-name max-reserved ] ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| state-limit |
Configures State limit |
| max-states |
Type: uinteger min: 1 max: 4294967295 Maximum (*,G)/(S,G) entries allowed in this VRF |
| reserved |
Configures Reserved limit |
| route-map-name |
Type: string length: 100 Route-map name |
| max-reserved |
Type: uinteger min: 1 max: 4294967295 Maximum reserved (*,G)/(S,G) entries allowed in this VRF |
ipv6 pim { use-shared-tree-only | spt-threshold infinity } group-list route-map-name | no ipv6 pim { use-shared-tree-only | spt-threshold infinity } [ group-list route-map-name ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| pim |
PIM6 global configuration commands |
| use-shared-tree-only |
Use (*,G) only state, no source state is created |
| spt-threshold |
Source-tree switching threshold |
| infinity |
Never switch to source-tree |
| group-list |
Specify group ranges through policy |
| route-map-name |
Type: string length: 100 Route-map name |
[no] ipv6 port traffic-filter name inout
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| port |
Port policy |
| traffic-filter |
Specify access control for packets |
| name |
Type: string length: 64 List name |
| inout |
Traffic direction
|
ipv6 prefix-list ipv6-pfl-name description line | no ipv6 prefix-list ipv6-pfl-name description
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| prefix-list |
Build a prefix list |
| ipv6-pfl-name |
Type: string pattern: [!-~]* length: 63 Name of prefix-list |
| ipv6-pfl-name |
Type: string Known prefix-list name |
| description |
Description of the IPv6 prefix list |
| line |
Type: remainder IPv6 prefix-list description string |
ipv6 prefix-list ipv6-pfl-name [ seq seq ] { permit | deny } prefix { [ eq equal ] | [ ge greater ] [ le lesser ] } | no ipv6 prefix-list { ipv6-pfl-name | ipv6-pfl-name } [ seq seq ] [ { permit | deny } prefix { [ eq equal ] | [ ge greater ] [ le lesser ] } ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| prefix-list |
Build a prefix list |
| ipv6-pfl-name |
Type: string pattern: [!-~]* length: 63 Name of prefix-list |
| ipv6-pfl-name |
Type: string pattern: [!-~]* length: 63 Name of prefix-list |
| ipv6-pfl-name |
Type: string Known prefix-list name |
| seq |
Sequence number of an entry |
| seq |
Type: uinteger min: 1 max: 4294967294 Sequence number |
| permit |
Specify routes to forward |
| deny |
Specify routes to reject |
| prefix |
Type: ipv6prefix IPv6 prefix network/length |
| eq |
Exact prefix length to be matched |
| equal |
Type: integer min: 1 max: 128 Exact prefix length |
| ge |
Minimum prefix length to be matched |
| greater |
Type: integer min: 1 max: 128 Minimum prefix length |
| le |
Maximum prefix length to be matched |
| lesser |
Type: integer min: 1 max: 128 Maximum prefix length |
[no] ipv6 queue-packets
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| queue-packets |
Queue 1 packet when triggered NS is sent |
[no] ipv6 queue-packets-limit [limit]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| queue-packets-limit |
Maximum number of queue packets for unresolved NDS |
| limit |
Type: uinteger min: 5 max: 50 default: 10 Unresolved ND queue packet limit |
ipv6 [nd] redirects | no ipv6 [nd] redirects
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| nd |
ICMPv6 Neighbor Discovery commands |
| redirects |
Enable sending ICMPv6 Redirect messages |
[no] ipv6 route ipv6-prefix { interface | { link-local interface-link-local | pin-interface next-hop | { next-hop | nh-prefix } | vlan-interface } [ vrf { vrf-name | vrf-known-name } ] } [ name rt-name ] [ pref | tag tag-value ] +
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| route |
Configure IPv6 unicast static route |
| ipv6-prefix |
Type: ipv6prefix IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128 |
| next-hop |
Type: ipv6addr IPv6 address format: aaaa:bbbb:cccc:dddd:eeee:ffff:gggg:hhhh, aaaa::bbbb |
| nh-prefix |
Type: ipv6prefix IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128 |
| interface |
Type: interface Interface for interface static routes |
| name |
Specify name of the next hop |
| rt-name |
Type: string length: 50 Name of next hop |
| pin-interface |
Type: interface Pin interface |
| link-local |
Type: ipv6addr Link-local next-hop requires interface also |
| interface-link-local |
Type: interface Interface for interface static routes |
| vlan-interface |
Type: interface vlan interface |
| vrf |
VRF for next-hop if different from this vrf |
| vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name |
Type: vrf Known VRF name |
| pref |
Type: integer min: 1 max: 255 default: 1 Route preference |
| tag |
Supply tag value with static route |
| tag-value |
Type: uinteger min: 0 max: 0 default: 0 32-bit value for tag |
[no] ipv6 router isis tag
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| router |
Enable a routing process |
| isis |
Intermediate System to Intermediate System (IS-IS) |
| tag |
Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Process tag |
[no] ipv6 router ospfv3 tag area { area-id-ip | area-id-int } [ secondaries none ]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| router |
Enable a routing process |
| ospfv3 |
OSPFv3 configuration commands |
| tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
| area |
Area associated with interface |
| area-id-ip |
Type: ipaddr OSPFv3 area ID in IP address format |
| area-id-int |
Type: uinteger min: 0 max: 4294967295 OSPFv3 area ID as a decimal format |
| secondaries |
Do not include secondary IPv6 addresses |
| none |
Do not include secondary IPv6 addresses |
[no] ipv6 router ospfv3 tag multi-area area-id-ip
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| router |
Enable a routing process |
| ospfv3 |
OSPFv3 configuration commands |
| tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
| multi-area |
Multi-Area associated with interface |
| area-id-ip |
Type: ipaddr Area Id as an integer or ip address |
[no] ipv6 routing event-history { u6rib-event-hist | u6rib-event-hist-hid } size { size_in_text | size_in_bytes }
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| routing |
Routing information |
| event-history |
Configure routing event log |
| u6rib-event-hist |
Type: string Configure routing event log |
| u6rib-event-hist-hid |
Type: string Configure routing event log |
| size |
Size of buffer |
| size_in_text |
Buffer size default: medium
|
| size_in_bytes |
Type: uinteger min: 0 max: 1048576 Enter an integer value for the event history buffer |
[no] ipv6 routing multicast software-replication
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| routing |
Routing information |
| multicast |
Configure multicast |
| software-replication |
Enable software replication of PIM ASM leak packets |
[no] ipv6 source-route [rh0]
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| source-route |
Process IPv6 Routing Header |
| rh0 |
Process IPv6 Routing Header - Type 0 (RH0) |
[no] ipv6 traffic-filter name inout
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| traffic-filter |
Specify access control for packets |
| name |
Type: string length: 64 List name |
| inout |
Traffic direction
|
[no] ipv6 [icmp] unreachables
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| icmp |
ICMPv6 commands |
| unreachables |
Enable sending ICMPv6 Unreachable messages (port-unreachables are always rate-limit enabled) |
[no] { platform | hardware } ipv6 verify { length { consistent | maximum { max-frag | udp | max-tcp } } | tcp tiny-frag | version }
| no |
Negate a command or set its defaults |
| platform |
Platform configuration commands |
| hardware |
Hardware Internal Information |
| ipv6 |
IPv6 |
| verify |
Enable IPv6 packet validation checks in hardware Not available in this release. |
| length |
Validate IPv6 packet header and payload length |
| consistent |
Actual frame size is equal to or more than IPv6 length plus ethernet header |
| maximum |
Check max fragment offset and payload length |
| max-frag |
Fragment offset field value |
| udp |
Maximum UDP length has to be less than IPv6 payload length |
| max-tcp |
Maximum TCP length has to be less than IPv6 payload length |
| tcp |
Validate TCP packet header |
| tiny-frag |
Check TCP tiny fragment |
| version |
Must be 6 for an ethertype of IPv6 (0x86DD) Not available in this release. |
[no] ipv6 vip ipv6-addr
| no |
Negate a command or set its defaults |
| ipv6 |
Configure IPv6 features |
| vip |
Virtual IPv6 address |
| ipv6-addr |
Type: ipv6addr IPv6 address format: aaaa:bbbb:cccc:dddd:eeee:ffff:gggg:hhhh, aaaa::bbbb |
is-type is-type | no is-type [is-type]
| no |
Negate a command or set its defaults |
| is-type |
IS type for this IS-IS process |
| is-type |
IS-IS IS type
|
ishow cli find nodes [component] [recurse]
| ishow |
Show internal information |
| cli |
Show CLI information |
| find |
ishow cli modes
| ishow |
Show internal information |
| cli |
Show CLI information |
ishow cli nodes [mode]
| ishow |
Show internal information |
| cli |
Show CLI information |
ishow cli paths component [type]
| ishow |
Show internal information |
| cli |
Show CLI information |
| type |
default: 0
|
ishow cli tags
| ishow |
Show internal information |
| cli |
Show CLI information |
ishow core pid backtrace
| ishow |
Show internal information |
| core |
display info from core file |
| pid |
Type: integer PID from 'show cores' |
| backtrace |
display backtrace -- needs enough space to unzip the core file! |
[no] isis authentication-check
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| authentication-check |
Check authentication on received hellos |
[no] isis authentication-check level-1
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| authentication-check |
Check authentication on received hellos |
| level-1 |
Configure authentication check for level-1 IIHs |
[no] isis authentication-check level-2
| no |
Negate a command or set its defaults |
| isis |
IS-IS configuration commands |
| authentication-check |
Check authentication on received hellos |
| level-2 |
Configure authentication check for level-2 IIHs |
Feedback