Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 6.1(2)I2(2)

variance

variance variance | no variance [variance]

Syntax Description


no	Negate a command or set its defaults
variance	Control load balancing variance
`variance`	Type: integer min: 1 max: 128 default: 1 Metric variance multiplier

Command Modes

/exec/configure/router-eigrp/router-eigrp-vrf-common
/exec/configure/router-eigrp/router-eigrp-af-common

vdc (vdc_mgr)

vdc e-vdc [ id new_id ] [ type vtype ]

Syntax Description


vdc	Manage Virtual Device Context
`e-vdc`	Type: userdef Enter Virtual Device Context <vdc-id>
id	force this vdc into a specific id
`new_id`	Type: integer force this vdc into a specific id
type	Create vdc with a special set of services Not available in this release.
`vtype`	type of vdc storage value: 1 VDC to be used for Storage only

Command Modes

/exec/configure

vdc (vdc_mgr)

vdc new-vdc [ id new_id | template res-mgr-template-known-name-all | ha-policy { single-sup hap-set | dual-sup sw-set } + | type vtype ] +

Syntax Description


vdc	Manage Virtual Device Context
`new-vdc`	Type: userdef Enter Virtual Device Context <vdc-id>
id	force this vdc into a specific id
`new_id`	Type: integer force this vdc into a specific id
template	Resource template for this vdc
`res-mgr-template-known-name-all`	Type: string Resource template for this vdc
ha-policy	Change HA policy for this VDC
`hap-set`	Set hap policy bringdown value: 1 Bring down the vdc restart value: 2 Bring down the vdc, then bring the vdc back up reload value: 3 Reload the supervisor
single-sup	Change HA policy for this VDC for single-sup situations
dual-sup	Change HA policy for this VDC for dual-sup situations
`sw-set`	Set hap policy bringdown value: 1 Bring down the vdc restart value: 2 Bring down the vdc, then bring the vdc back up switchover value: 3 Switchover the supervisor
type	Create vdc with a special set of services Not available in this release.
`vtype`	type of vdc storage value: 1 VDC to be used for Storage only

Command Modes

/exec/configure

vdc combined-hostname

[no] vdc combined-hostname

Syntax Description


no	Negate a command or set its defaults
vdc	Manage Virtual Device Context
combined-hostname	The hostname of non-default vdcs will be <default vdc name>-<nondefault vdc name>

Command Modes

/exec/configure

vdc resource template

[no] vdc resource template { name | res-mgr-template-known-name }

Syntax Description


no	Negate a command or set its defaults
vdc	Manage Virtual Device Context
resource	Configure resource template
template	Configure resource template
`name`	Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* length: 100 Resource template name
`res-mgr-template-known-name`	Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* length: 100 Resource template name

Command Modes

/exec/configure

vdc suspend

vdc en-vdc suspend

Syntax Description


vdc	Manage Virtual Device Context
`en-vdc`	Type: userdef Enter Virtual Device Context <vdc-id>
suspend	Put the vdc in a paused state. When resumed vdc will come up with its startup config

Command Modes

/exec/configure

verify

Syntax Description


verify	Verify the current configuration session

Command Modes

/exec/configure

verify verbose

Syntax Description


verify	Verify the current configuration session
verbose	Verify the current configuration session with more details

Command Modes

/exec/configure

version

[no] version s0

Syntax Description


no	Negate a command or set its defaults
version	Version info
`s0`	Type: string Version

Command Modes

/exec/configure

virtual-service (vman)

[no] virtual-service virt_serv_name

Syntax Description


no	Negate a command or set its defaults
virtual-service	Configure a virtual service
`virt_serv_name`	Type: string pattern: [a-zA-Z0-9_]+ length: 20 Virtual service name

Command Modes

/exec/configure

virtual-service (vman)

virtual-service { install name virt_serv_name package file_uri [ media target_media ] | upgrade name virt_serv_name package file_uri | uninstall name virt_serv_name }

Syntax Description


virtual-service	Virtualization manager actions
install	Add a virtual service to install database
upgrade	Upgrade a virtual service package to a different version
name	Name of the virtual service
`virt_serv_name`	Type: string pattern: [a-zA-Z0-9_]+ length: 20 Virtual service name
package	Package location
`file_uri`	Type: uri File name (with .ova extension) for the virtual service
media	Target media to use to explode the virtual service package
`target_media`	Type: uri Target media
uninstall	Remove a virtual service from the install database

Command Modes

/exec

virtual-service (vman)

[no] virtual-service

Syntax Description


no	Negate a command or set its defaults
virtual-service	Virtual service global settings

Command Modes

/exec/configure

virtual-service connect name

virtual-service connect name virt_serv_name { console | aux }

Syntax Description


virtual-service	Virtualization service actions
connect	Request a virtual service shell
name	Name of the virtual service
`virt_serv_name`	Type: string pattern: [a-zA-Z0-9_]+ length: 20 Name of existing virtual service
console	Request a virtual service console shell
aux	Request a virtual service auxiliary console shell

Command Modes

/exec

virtual-service move name to

virtual-service move name virt_serv_name { log | core } to dir_uri

Syntax Description


virtual-service	Virtualization service actions
move	Move a virtual service log or core files
name	Name of the virtual service
`virt_serv_name`	Type: string pattern: [a-zA-Z0-9_]+ length: 20 Name of existing virtual service
log	Move log files
core	Move core files
to	Destination directory to move log or core files to
`dir_uri`	Type: uri Destination directory name

Command Modes

/exec

vlan2

[no] vlan2 vlan-id-create-delete

Syntax Description


no	Negate a command or set its defaults
vlan2	Vlan commands
`vlan-id-create-delete`	Type: vlan-mrange VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

Command Modes

/exec/configure

vlan access-map

[no] vlan access-map name [seqno]

Syntax Description


no	Negate a command or set its defaults
vlan	Vlan commands
`name`	Type: string length: 64 List name
access-map	Configure a VLAN access map
`seqno`	Type: uinteger min: 1 max: 4294967295 Sequence number

Command Modes

/exec/configure

vlan configuration

[no] vlan configuration vlan-id-create-delete

Syntax Description


no	Negate a command or set its defaults
vlan	Vlan commands
configuration	vlan feature configuration mode
`vlan-id-create-delete`	Type: vlan-mrange VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

Command Modes

/exec/configure

vlan designated priority

vlan vlan-id designated priority prio | no vlan vlan-id designated priority [prio]

Syntax Description


no	Negate a command or set its defaults
vlan	VLAN Switch Spanning Trees
`vlan-id`	Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11
designated	Set the designated bridge priority for the spanning tree
priority	Set the bridge priority for the spanning tree
`prio`	Type: uinteger min: 0 max: 61440 bridge priority in increments of 4096

Command Modes

/exec/configure/spanning-tree/pseudo

vlan dot1Q tag native

vlan dot1Q tag native | no vlan dot1Q tag native

Syntax Description


no	Negate a command or set its defaults
vlan	Vlan commands
dot1Q	IEEE 802.1Q Virtual LAN
tag	tag parameters
native	tag native vlan

Command Modes

/exec/configure

vlan filter

[no] vlan filter name { vlan-list vlans | vlan-list-include-reserved vlans-include-reserved }

Syntax Description


no	Negate a command or set its defaults
vlan	Vlan commands
filter	Specify access control for packets
`name`	Type: string length: 64 List name
vlan-list	Specify list of VLANs to apply access control
`vlans`	Type: vlan-mrange List of VLANs
vlan-list-include-reserved	Specify list of VLANs to apply access control
`vlans-include-reserved`	Type: vlan-mrange List of VLANs

Command Modes

/exec/configure

vlan policy deny

[no] vlan policy deny

Syntax Description


no	Negate a command or set its defaults
vlan	Configure the vlan policy for this role
policy	Configure the vlan policy for this role
deny	Deny access to a vlan unless specifically permitted

Command Modes

/exec/configure/role

vlan root priority

vlan vlan-id root priority prio | no vlan vlan-id root priority [prio]

Syntax Description


no	Negate a command or set its defaults
vlan	VLAN Switch Spanning Trees
`vlan-id`	Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11
root	Set the root bridge priority for the spanning tree
priority	Set the bridge priority for the spanning tree
`prio`	Type: uinteger min: 0 max: 61440 bridge priority in increments of 4096

Command Modes

/exec/configure/spanning-tree/pseudo

vn-segment

vn-segment segment-id | no vn-segment

Syntax Description


no	Negate a command or set its defaults
vn-segment	VN Segment id of the VLAN
`segment-id`	Type: integer min: 4096 max: 16773119 segment-id

Command Modes

/exec/configure/vlan

vpc

vpc [ vpc_num | peer-link ] | no vpc [ vpc_num | peer-link ]

Syntax Description


no	Negate a command or set its defaults
vpc	Virtual Port Channel configuration
`vpc_num`	Type: integer min: 1 max: 4096 specify a Virtual Port Channel number
peer-link	specify if this link is used for peer communication

Command Modes

/exec/configure/if-eth-port-channel-switch

vpc domain

vpc domain domain_id | no vpc domain domain_id

Syntax Description


no	Negate a command or set its defaults
vpc	Virtual Port Channel configuration
domain	Specify domain
`domain_id`	Type: uinteger min: 1 max: 1000 domain id

Command Modes

/exec/configure

vpc orphan-port suspend

[no] vpc orphan-port suspend

Syntax Description


no	Negate a command or set its defaults
vpc	Virtual Port Channel configuration
orphan-port	orphan-port (non-vpc port)
suspend	suspend - when vPC secondary peerlink goes down

Command Modes

/exec/configure/if-eth-phy

vpc role preempt

Syntax Description


vpc	Virtual Port Channel configuration
role	vPC role related command
preempt	Enable/Trigger preemption of lower priority master

Command Modes

/exec

vpc suspend

vpc suspend [n-secs]

Syntax Description


vpc	Virtual Port Channel configuration
suspend	Suspend the vPC on primary
`n-secs`	Type: integer min: 15 max: 60 Suspension duration in seconds

Command Modes

/exec/configure/vpc-domain

vpc upgrade-done

Syntax Description


vpc	Virtual Port Channel configuration
upgrade-done	Unlock the cli and remove ISSU state

Command Modes

/exec

vpn id

vpn id vpn-id | no vpn id [vpn-id]

Syntax Description


no	Negate a command or set its defaults
vpn	Configure VPN ID in rfc2685 format Not available in this release.
id	Configure VPN ID in rfc2685 format
`vpn-id`	Type: string pattern: ^[0-9a-fA-F]+:[0-9a-fA-F]+$ OUI:VPN-Index, format (hex) <3 bytes OUI:4 bytes VPN-Index>

Command Modes

/exec/configure/vrf

vrf (bgp)

[no] vrf vrf-name

Syntax Description


no	Negate a command or set its defaults
vrf	Virtual Router Context
`vrf-name`	Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf \| detail \| interface \| definition \| context \| forwarding \| member \| all \| default \| l2-vrf length: 32 VRF name

Command Modes

/exec/configure/router-bgp

vrf (eigrp)

[no] vrf vrf-name

Syntax Description


no	Negate a command or set its defaults
vrf	Configure VRF information
`vrf-name`	Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf \| detail \| interface \| definition \| context \| forwarding \| member \| all \| default \| l2-vrf length: 32 VRF name

Command Modes

/exec/configure/router-eigrp

vrf (eth_span)

[no] vrf { vrf-name | vrf-known-name }

Syntax Description


no	Negate a command or set its defaults
vrf	set vrf membership
`vrf-name`	Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf \| detail \| interface \| definition \| context \| forwarding \| member \| all \| l2-vrf \| topology \| passive length: 32 VRF name
`vrf-known-name`	Type: vrf Known VRF name

Command Modes

/exec/configure/monitor-erspan

vrf (isis)

[no] vrf vrf-name

Syntax Description


no	Negate a command or set its defaults
vrf	Configure ISIS VRF information
`vrf-name`	Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf \| detail \| interface \| definition \| context \| forwarding \| member \| all \| default \| l2-vrf length: 32 VRF name

Command Modes

/exec/configure/router-isis

vrf (ospf)

[no] vrf vrf-name

Syntax Description


no	Negate a command or set its defaults
vrf	Display per-VRF information
`vrf-name`	Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf \| detail \| interface \| definition \| context \| forwarding \| member \| all \| default \| l2-vrf length: 32 VRF name

Command Modes

/exec/configure/router-ospf

vrf (ospfv3)

[no] vrf vrf-name

Syntax Description


no	Negate a command or set its defaults
vrf	Display per-VRF information
`vrf-name`	Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf \| detail \| interface \| definition \| context \| forwarding \| member \| all \| default \| l2-vrf length: 32 VRF name

Command Modes

/exec/configure/router-ospf3

vrf (rip)

[no] vrf vrf-name

Syntax Description


no	Negate a command or set its defaults
vrf	Configure RIP VRF information
`vrf-name`	Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf \| detail \| interface \| definition \| context \| forwarding \| member \| all \| default \| l2-vrf length: 32 VRF name

Command Modes

/exec/configure/router-rip

vrf context

vrf context vrf-name | no vrf context { vrf-name | vrf-name }

Syntax Description


no	Negate a command or set its defaults
vrf	Configure VRF parameters
context	Create VRF and enter VRF mode
`vrf-name`	Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf \| detail \| interface \| definition \| context \| forwarding \| member \| all \| l2-vrf \| topology \| passive length: 32 VRF name
`vrf-name`	Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf \| detail \| interface \| definition \| context \| forwarding \| member \| all \| l2-vrf \| topology \| passive \| management length: 32 VRF name
`vrf-name`	Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf \| detail \| interface \| definition \| context \| forwarding \| member \| all \| l2-vrf \| topology \| passive \| management length: 32 VRF name

Command Modes

/exec/configure

vrf member (l3vm)

vrf member vrf-name | no vrf member [vrf-name]

Syntax Description


no	Negate a command or set its defaults
vrf	Configure VRF parameters
member	Set interface's VRF membership
`vrf-name`	Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf \| detail \| interface \| definition \| context \| forwarding \| member \| all \| default \| l2-vrf length: 32 VRF name

Command Modes

/exec/configure/if-igp
/exec/configure/if-mgmt-ether

vrf member (otm)

vrf member { vrf_name | vrf-known-name } | no vrf member [ vrf_name | vrf-known-name ]

Syntax Description


no	Negate a command or set its defaults
vrf	Configure VPN Routing/Forwarding table
member	Set route's VRF membership
`vrf_name`	Type: vrf VRF name
`vrf-known-name`	Type: vrf Known VRF name

Command Modes

/exec/configure/track

vrf policy deny

[no] vrf policy deny

Syntax Description


no	Negate a command or set its defaults
vrf	Configure the vrf policy for this role
policy	Configure the vrf policy for this role
deny	Deny access to a vrf unless specifically permitted

Command Modes

/exec/configure/role

vrrp

[no] vrrp vr_id

Syntax Description


no	Negate a command or set its defaults
vrrp	VRRP configuration commands
`vr_id`	Type: integer min: 1 max: 255 IPv4 VR group number

Command Modes

/exec/configure/if-legacy-eth
/exec/configure/if-ethernet
/exec/configure/if-port-channel
/exec/configure/if-vlan-common
/exec/configure/if-eth-any

vrrp bfd

vrrp bfd peer_intf_ip | no vrrp bfd [peer_intf_ip]

Syntax Description


vrrp	VRRP configuration commands
bfd	BFD protocol
`peer_intf_ip`	Type: ipaddr Neighbor IP address
no	Negate a command or set its defaults

Command Modes

/exec/configure/if-eth-any/vrrp

vsan policy deny

[no] vsan policy deny

Syntax Description


no	Negate a command or set its defaults
vsan	Configure the vsan policy for this role
policy	Configure the vsan policy for this role
deny	Deny access to a vsan unless specifically permitted

Command Modes

/exec/configure/role

vsh

" | " vsh

Syntax Description


\|	Pipe command output to filter
vsh	the shell that understands cli command

Command Modes

/output

vtp

[no] vtp

Syntax Description


no	Negate a command or set its defaults
vtp	Enable VTP on this interface

Command Modes

/exec/configure/if-switching

vtp domain

vtp domain domain_name

Syntax Description


vtp	Configure global VTP state
domain	Set the name of the VTP administrative domain
`domain_name`	Type: string length: 32 The ascii name for the VTP administrative domain

Command Modes

/exec/configure

vtp file

vtp file file_name | no vtp file

Syntax Description


no	Negate a command or set its defaults
vtp	Configure global VTP state
file	Set the name of the VTP file name
`file_name`	Type: uri URI for vlan.dat

Command Modes

/exec/configure

vtp mode

vtp mode mode-name | no vtp mode

Syntax Description


no	Negate a command or set its defaults
vtp	Configure global VTP state
mode	Configure VTP device mode Not available in this release.
`mode-name`	transparent value: 1 Set the device to transparent mode

Command Modes

/exec/configure

vtp password

vtp password password_name | no vtp password

Syntax Description


no	Negate a command or set its defaults
vtp	Configure global VTP state
password	Set the password for the VTP administrative domain
`password_name`	Type: string length: 64 The ascii password for the VTP administrative domain

Command Modes

/exec/configure

vtp pruning

vtp pruning | no vtp pruning

Syntax Description


no	Negate a command or set its defaults
vtp	Configure global VTP state
pruning	Set the adminstrative domain to permit pruning Not available in this release.

Command Modes

/exec/configure

vtp version

vtp version version_num | no vtp version

Syntax Description


no	Negate a command or set its defaults
vtp	Configure global VTP state
version	Set the adminstrative domain to VTP version
`version_num`	Type: uinteger min: 1 max: 2 Set the adminstrative domain to VTP version

Command Modes

/exec/configure

Bias-Free Language

Results

Chapter: V Commands

V Commands

variance

Syntax Description

Command Modes

vdc (vdc_mgr)

Syntax Description

Command Modes

vdc (vdc_mgr)

Syntax Description

Command Modes

vdc combined-hostname

Syntax Description

Command Modes

vdc resource template

Syntax Description

Command Modes

vdc suspend

Syntax Description

Command Modes

verify

Syntax Description

Command Modes

verify verbose

Syntax Description

Command Modes

version

Syntax Description

Command Modes

virtual-service (vman)

Syntax Description

Command Modes

virtual-service (vman)

Syntax Description

Command Modes

virtual-service (vman)

Syntax Description

Command Modes

virtual-service connect name

Syntax Description

Command Modes

virtual-service move name to

Syntax Description

Command Modes

vlan2

Syntax Description

Command Modes

vlan access-map

Syntax Description

Command Modes

vlan configuration

Syntax Description

Command Modes

vlan designated priority

Syntax Description

Command Modes

vlan dot1Q tag native

Syntax Description

Command Modes

vlan filter

Syntax Description

Command Modes

vlan policy deny

Syntax Description

Command Modes

vlan root priority

Syntax Description

Command Modes

vn-segment

Syntax Description

Command Modes

vpc

Syntax Description

Command Modes

vpc domain

Syntax Description

Command Modes