Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 6.1(2)I2(2)

bandwidth (if_manager)

bandwidth { bandwidth_val | inherit [inherit_val] } | no bandwidth { [bandwidth_val] | inherit [inherit_val] }

Syntax Description


no	Negate a command or set its defaults
bandwidth	Set bandwidth informational parameter
`bandwidth_val`	Type: integer min: 1 max: 800000000 Bandwidth in kilobits
inherit	Specify that bandwidth is inherited
`inherit_val`	Type: integer min: 1 max: 800000000 Bandwidth in kilobits
`inherit_val`	Type: integer min: 1 max: 80000000 Bandwidth in kilobits

Command Modes

/exec/configure/if-eth-port-channel
/exec/configure/if-port-channel-range
/exec/configure/if-port-channel-sub
/exec/configure/if-eth-port-channel-switch
/exec/configure/if-eth-port-channel-p2p
/exec/configure/if-eth-port-channel
/exec/configure/if-port-channel-range
/exec/configure/if-port-channel-sub
/exec/configure/if-eth-port-channel-switch
/exec/configure/if-eth-port-channel-p2p

bandwidth (if_manager)

bandwidth { bandwidth_val | inherit [inherit_val] } | no bandwidth { [bandwidth_val] | inherit [inherit_val] }

Syntax Description


no	Negate a command or set its defaults
bandwidth	Set bandwidth informational parameter
`bandwidth_val`	Type: integer min: 1 max: 100000000 Bandwidth in kilobits
inherit	Specify that bandwidth is inherited
`inherit_val`	Type: integer min: 1 max: 100000000 Bandwidth in kilobits

Command Modes

/exec/configure/if-ethernet-all
/exec/configure/if-eth-non-member
/exec/configure/if-ether-sub
/exec/configure/if-gig-ether-sub
/exec/configure/if-remote-ethernet-sub
/exec/configure/if-ether-sub-p2p

bandwidth (qosmgr)

[no] bandwidth { { xxx bw-value [ bps | kbps | mbps | gbps ] | percent percentage } | remaining percent rem-perc }

Syntax Description


no	Negate a command or set its defaults
bandwidth	Specify bandwidth for the class
xxx	xxx Not available in this release.
`bw-value`	Type: long Value in bps/kbps/mbps/gbps
bps	Bits per second
kbps	Kilo bits per second
mbps	Mega bits per second
gbps	Giga bits per second
percent	Percentage of available bandwidth
`percentage`	Type: uinteger min: 0 max: 100 Value in percentage
remaining	% of remaining bandwidth
`rem-perc`	Type: uinteger min: 0 max: 100 Value in percentage

Command Modes

/exec/configure/policy-map/type/queuing/class

bandwidth (svi)

bandwidth bandwidth_val | no bandwidth

Syntax Description


no	Negate a command or set its defaults
bandwidth	Set bandwidth informational parameter
`bandwidth_val`	Type: uinteger min: 1 max: 400000000 Bandwidth in kilobits

Command Modes

/exec/configure/if-vlan-common

bandwidth (tm)

bandwidth bandwidth_val | no bandwidth

Syntax Description


no	Negate a command or set its defaults
bandwidth	Set bandwidth informational parameter
`bandwidth_val`	Type: uinteger min: 1 max: 10000000 Bandwidth in kilobits

Command Modes

/exec/configure/if-any-tunnel

banner motd

banner motd line | no banner motd

Syntax Description


no	Negate a command or set its defaults
banner	Configure banner message
motd	Configure banner motd message
`line`	Type: remainder Delimiter char (Very first char is delimiter char) followed by message ending with delimiter

Command Modes

/exec/configure

bcm-shell module (syscli)

bcm-shell module module

Syntax Description


bcm-shell	bcm shell/cmd
module	Module number of the linecard
`module`	Type: integer Enter module number

Command Modes

/exec

bcm-shell module (syscli)

bcm-shell module module quoted-cmd

Syntax Description


bcm-shell	bcm shell/cmd
module	Module number of the linecard
`module`	Type: integer Enter module number
`quoted-cmd`	Type: string the command to run on bcm-shell

Command Modes

/exec

beacon

[no] beacon

Syntax Description


no	Negate a command or set its defaults
beacon	Disable/enable the beacon for an interface

Command Modes

/exec/configure/if-ethernet-all
/exec/configure/if-eth-base

bestpath

[no] bestpath { always-compare-med | med { missing-as-worst | non-deterministic | confed } | compare-routerid | cost-community ignore | as-path multipath-relax | multipath compare-neighborid }

Syntax Description


no	Negate a command or set its defaults
bestpath	Change default bestpath selection algorithm
always-compare-med	Compare MED on paths from different AS
med	MED
missing-as-worst	Treat missing MED as highest MED
non-deterministic	Not always pick the best-MED path among paths from same AS
compare-routerid	Compare router-id for identical EBGP paths
cost-community	cost community
ignore	Ignore cost communities in bestpath selection
confed	Compare MED only from paths originated from within a confederation
as-path	AS-Path
multipath-relax	Relax AS-Path restriction when choosing multipaths
multipath	Influence multipath selection algorithm
compare-neighborid	When more paths available than max path config, use neighborid tibreaker

Command Modes

/exec/configure/router-bgp/vrf-cmds

bfd-app session auto-expiry

bfd-app session auto-expiry { timeout millis | now }

Syntax Description


bfd-app	BFD application commands
auto-expiry	auto expiry start/end
session	session operation
timeout	timeout after
now	expiry reached, dont wait to timeout, do them now
`millis`	Type: integer milli-secs later

Command Modes

/exec/configure

bfd-app session remove

bfd-app session remove { all | intf intf_id | iod iod_id }

Syntax Description


bfd-app	BFD application commands
session	session operation
remove	Remove sessions
all	Remove all sessions
intf	Remove all sessions on interface
`intf_id`	Type: interface Interface Id
iod	interface iod
`iod_id`	Type: hex Interface iod in hex

Command Modes

/exec/configure

bfd-app session src-ip

[no] bfd-app session src-ip { src_ip dest-ip dest_ip | src_ipv6 dest-ip dest_ipv6 } { intf intf_id | iod iod_id }

Syntax Description


no	Negate a command or set its defaults
bfd-app	BFD application commands
session	session operation
src-ip	Source ip
`src_ip`	Type: ipaddr Source ip value
`src_ipv6`	Type: ipv6addr Source ipv6 value
dest-ip	Destination ip
`dest_ip`	Type: ipaddr Destination ip value
`dest_ipv6`	Type: ipv6addr Destination ipv6 value
iod	interface iod
`iod_id`	Type: hex Interface iod in hex
intf	interface
`intf_id`	Type: interface Interface Id

Command Modes

/exec/configure

bfd (bgp_bfd)

[ no | default ] bfd

Syntax Description


no	Negate a command or set its defaults
default	Inherit values from a peer template
bfd	Bidirectional Fast Detection for the neighbor

Command Modes

/exec/configure/router-bgp/router-bgp-neighbor-sess

bfd (eigrp_bfd)

[no] bfd

Syntax Description


no	Negate a command or set its defaults
bfd	Enable BFD on all EIGRP interfaces

Command Modes

/exec/configure/router-eigrp
/exec/configure/router-eigrp/router-eigrp-vrf
/exec/configure/router-eigrp/router-eigrp-af-ipv4

bfd (isis_bfd)

[no] bfd

Syntax Description


no	Negate a command or set its defaults
bfd	Enable IPv4 BFD on all ISIS interfaces

Command Modes

/exec/configure/router-isis/router-isis-vrf-common
/exec/configure/router-isis/router-isis-af-ipv4

bfd (ospf_bfd)

[no] bfd

Syntax Description


no	Negate a command or set its defaults
bfd	Enable BFD on all OSPF interfaces

Command Modes

/exec/configure/router-ospf
/exec/configure/router-ospf/vrf

bfd authentication key-id

[no] bfd authentication auth_name key-id key_id_val { key key_val | hex-key h_key_val } | no bfd authentication

Syntax Description


no	Negate a command or set its defaults
bfd	BFD commands
authentication	Configure BFD authentication parameters
`auth_name`	auth algorithm Keyed-SHA1 value: 20 Keyed-SHA1
key-id	Key ID to use in BFD frames
`key_id_val`	Type: integer min: 1 max: 255 Key ID value
key	ASCII SHA1 secret
hex-key	HEX binary SHA1 secret
`key_val`	Type: string length: 20 SHA1 secret value
`h_key_val`	Type: string length: 40 SHA1 secret value. e.g ABCD123

Command Modes

/exec/configure/if-ma
/exec/configure/if-vlan-common
/exec/configure/if-ma-p2p

bfd echo

[no] bfd echo

Syntax Description


no	Negate a command or set its defaults
bfd	BFD commands
echo	Configure Echo function for sessions

Command Modes

/exec/configure/if-ma
/exec/configure/if-vlan-common
/exec/configure/if-ma-p2p

bfd echo-interface

[no] bfd echo-interface ifindex

Syntax Description


no	Negate a command or set its defaults
bfd	BFD commands
echo-interface	Configure interface used for bfd echo frames
`ifindex`	Type: interface loopback interface

Command Modes

/exec/configure

bfd interval min_rx multiplier

[no] bfd interval min_tx_mills min_rx min_rx_mills multiplier int_mult

Syntax Description


no	Negate a command or set its defaults
bfd	BFD commands
interval	Configure BFD session interval parameters
`min_tx_mills`	Type: integer min: 50 max: 999 TX interval in milliseconds
min_rx	Minimum RX interval
`min_rx_mills`	Type: integer min: 50 max: 999 RX interval in milliseconds
multiplier	Configure detect multiplier for bfd sessions
`int_mult`	Type: integer min: 1 max: 50 Detect Multiplier

Command Modes

/exec/configure
/exec/configure/if-ma
/exec/configure/if-ma-p2p

bfd ipv4

[no] bfd ipv4

Syntax Description


no	Negate a command or set its defaults
bfd	BFD commands
ipv4	Enable/Disable IPv4 sessions

Command Modes

/exec/configure/if-ma
/exec/configure/if-vlan-common
/exec/configure/if-ma-p2p

bfd move-session target

bfd move-session target target_mod

Syntax Description


bfd	BFD commands
move-session	move a session
target	Target module
`target_mod`	Type: integer min: 1 max: 18 Module number

Command Modes

/exec/configure/if-ma
/exec/configure/if-ma-p2p

bfd neighbor src-ip

[no] bfd neighbor src-ip { src_ip dest-ip dest_ip | src_ipv6 dest-ip dest_ipv6 }

Syntax Description


no	Negate a command or set its defaults
bfd	BFD commands
neighbor	BFD neighbor configuration commands (simulate client)
src-ip	Source ip
`src_ip`	Type: ipaddr Source ip value
`src_ipv6`	Type: ipv6addr Source ipv6 value
dest-ip	Destination ip
`dest_ip`	Type: ipaddr Destination ip value
`dest_ipv6`	Type: ipv6addr Destination ipv6 value

Command Modes

/exec/configure/if-ma
/exec/configure/if-ma-p2p

bfd optimize subinterface

[no] bfd optimize subinterface

Syntax Description


no	Negate a command or set its defaults
bfd	BFD commands
optimize	optimize
subinterface	optimize subinterfaces

Command Modes

/exec/configure/if-eth-port-channel
/exec/configure/if-ethernet
/exec/configure/if-ether-p2p
/exec/configure/if-eth-port-channel-p2p

bfd per-link

[no] bfd per-link

Syntax Description


no	Negate a command or set its defaults
bfd	BFD commands
per-link	Run BFD sessions on each port-channel link

Command Modes

/exec/configure/if-eth-port-channel
/exec/configure/if-port-channel-sub
/exec/configure/if-eth-port-channel-p2p;

bfd session-store remove client

bfd session-store remove hex_disc client int_cl

Syntax Description


bfd	BFD commands
session-store	session store operation
remove	Remove session from session store
`hex_disc`	Type: hex Session discriminator
client	Client Id
`int_cl`	Type: integer client

Command Modes

/exec/configure

bfd session-store source-ip dest-ip intf client

bfd session-store source-ip src_ip dest-ip dest_ip intf intf_id client int_cl

Syntax Description


bfd	BFD commands
session-store	Session store operation
source-ip	source ip
`src_ip`	Type: ipaddr source ip value
dest-ip	dest ip
`dest_ip`	Type: ipaddr source ip value
intf	interface
`intf_id`	Type: interface Interface Id
client	Client Id
`int_cl`	Type: integer client

Command Modes

/exec/configure

bfd session state state

bfd session state hex_disc state state_up_down

Syntax Description


bfd	BFD commands
session	session related test
state	Change session state
`hex_disc`	Type: hex Session discriminator
state	Change to state
`state_up_down`	UP/DOWN up value: 4 session up down value: 3 session down

Command Modes

/exec/configure

bfd slow-timer

[no] bfd slow-timer int_slow_timer

Syntax Description


no	Negate a command or set its defaults
bfd	BFD commands
slow-timer	Configure slow mode timer for sessions
`int_slow_timer`	Type: integer min: 1000 max: 30000 Slow rate timer in milliseconds

Command Modes

/exec/configure

blink

[no] blink { module module | s0 santa-cruz-range | chassis | powersupply psnum | fan fan_num }

Syntax Description


no	Negate a command or set its defaults
blink	blink locator led
module	blink module led
`module`	Type: integer please enter the module number
`s0`	Type: xbar-str blink a specific xbar
`santa-cruz-range`	Type: integer please enter the xbar number
chassis	blink chassis led
powersupply	blink powersupply led
`psnum`	Type: uinteger min: 1 max: 10 powersupply number
fan	blink Fan led
`fan_num`	Type: uinteger min: 1 max: 12 fan number

Command Modes

/exec

bloggerd delete

bloggerd delete { all-temporary-binary-log-dumps | all-temporary-binary-show-tech-files }

Syntax Description


bloggerd	Blogger commands
delete	Delete all logs of one type
all-temporary-binary-log-dumps	Delete all binary log dumps from the local partition (/var/sysmgr/tmp/)
all-temporary-binary-show-tech-files	Delete all binary show tech files

Command Modes

/exec

bloggerd live-process-core process pid

bloggerd live-process-core process process-name pid process-pid

Syntax Description


bloggerd	Blogger commands
live-process-core	Request a process core dump without killing it
process	Linux Process name
`process-name`	Type: string Enter the Linux name of the process for which core is being requested (Eg: sysmgr)
pid	Process PID
`process-pid`	Type: integer Enter the linux PID of the process for which core is being requested (Eg: 4571)

Command Modes

/exec

bloggerd live-process-core sap

bloggerd live-process-core sap sap

Syntax Description


bloggerd	Blogger commands
live-process-core	Dump the core of the live-process
sap	Dump core for a particular SAP
`sap`	Type: integer min: 0 max: 65536 Enter a valid SAP. Enter 0 for ALL SAPs in this VDC

Command Modes

/exec

bloggerd log-dump

[no] bloggerd log-dump { all | [ module module ] sap sap_num [ vdc new_id | vdc-all ] }

Syntax Description


no	Negate a command or set its defaults
bloggerd	Blogger commands
log-dump	Dump Log Buffer
all	Log Dump for ALL services across ALL modules in the switch on reaching threshold
module	Enable Buffer Dump for particular Module
`module`	Type: integer Enter a valid Module Number
sap	Enable Buffer Dump for a particular sap
`sap_num`	Type: integer min: 0 max: 65536 Enter a valid SAP. Enter 0 for ALL SAPs in this VDC
vdc	Enable Log Dump for a particular VDC. DEFAULT_VDC by default
`new_id`	Type: integer Enter a valid VDC ID
vdc-all	Enable Log Dump for the sap on ALL VDCs

Command Modes

/exec/configure

bloggerd log-dump once log-buffer sap event-history

bloggerd log-dump once log-buffer sap sap event-history { errors | msgs | app-specific uuid instance buffer-instance }

Syntax Description


bloggerd	Blogger commands
log-dump	Dump Log Buffer
once	Dump Log Buffer once immediately
log-buffer	Dump Log buffer
sap	Enable Buffer Dump for a particular sap
`sap`	Type: integer min: 0 max: 65536 Enter a valid SAP. Enter 0 for ALL SAPs in this VDC
event-history	Event-History Buffers
errors	event-history errors
msgs	event-history messages
app-specific	application specific event history
`uuid`	Type: integer Enter valid app's UUID
instance	Buffer Instance of the App-Specific SDWrap buffer
`buffer-instance`	Type: integer Enter a valid SDWrap buffer instance for the app

Command Modes

/exec

bloggerd log-dump once pss uuid

bloggerd log-dump once pss uuid uuid

Syntax Description


bloggerd	Blogger commands
log-dump	Dump Log Buffer
once	Dump Log Buffer once immediately
pss	Dump PSS
uuid	Dump PSS for a particular UUID
`uuid`	Type: integer min: 0 max: 65536 Enter a app's UUID

Command Modes

/exec

bloggerd log-throttle

[no] bloggerd log-throttle [ min-rollover min-rollover max-rollover-per-minute max-rollover-per-minute ]

Syntax Description


no	Negate a command or set its defaults
bloggerd	Blogger commands
log-throttle	Enable Log Dump Throttling for all NxOS services
min-rollover	Number of minimum buffer rollovers before starting to throttle. Default: 5
`min-rollover`	Type: integer min: 1 max: 1000 Enter the mininum number of roll-overs before throttleing log-dump. Default: 5
max-rollover-per-minute	Maximum allowed buffer rollovers per minute. Default: 1
`max-rollover-per-minute`	Type: integer min: 1 max: 100 Enter the maximum allowed roll-overs per minute before throttling. Default: 1

Command Modes

/exec/configure

bloggerd log-transfer

bloggerd log-transfer { ip-addr path | logflash }

Syntax Description


bloggerd	Blogger commands
log-transfer	Configure log transfer
`ip-addr`	Type: ipaddr IP addr of logging server
`path`	Type: string Path in tftp server to store logs. Eg: logOutput
logflash	Move all log-files to logflash

Command Modes

/exec/configure

bloggerd mleak-check directory1 directory2

bloggerd mleak-check directory1 uri0 directory2 uri1

Syntax Description


bloggerd	Blogger commands
mleak-check	Leak check
directory1	Enter path of directory
`uri0`	Type: string Linux path to file/directory (Eg: /bootflash/abc)
directory2	Enter path of directory
`uri1`	Type: string Linux path to file/directory (Eg: /bootflash/abc)

Command Modes

/exec

bloggerd mleak-dump all

Syntax Description


bloggerd	Blogger commands
mleak-dump	Leak dump
all	All apps on all modules

Command Modes

/exec

bloggerd parse log-buffer

bloggerd parse log-buffer { file | directory } uri0

Syntax Description


bloggerd	Blogger commands
parse	Parse a file
log-buffer	Parse buffer log file
directory	Enter path of directory
file	Enter file name. Please unzip file before parsing!
`uri0`	Type: string Linux path to file/directory (Eg: /bootflash/abc)

Command Modes

/exec

bloggerd parse log-buffer file sap

bloggerd parse log-buffer file uri0 sap sap-num

Syntax Description


bloggerd	Blogger commands
parse	Parse a file
log-buffer	Parse buffer log file
file	Enter file name. Please unzip file before parsing!
`uri0`	Type: string Linux path to file (Eg: /bootflash/abc)
sap	SAP of the application which should parse the file
`sap-num`	Type: integer min: 0 max: 65536 Enter a valid SAP. Enter 0 for ALL SAPs in this VDC

Command Modes

/exec

bloggerd parse pss file

bloggerd parse pss file uri0

Syntax Description


bloggerd	Blogger commands
parse	Parse a file
pss	Parse a dumped PSS File
file	Enter file name (without pss extensions). Please unzip file before parsing!
`uri0`	Type: string Linux path to file/directory (Eg: /bootflash/abc)

Command Modes

/exec

boot

boot s0 uri0 [ module [module] ] | no boot s0 [ uri0 [ module [module] ] ]

Syntax Description


no	Negate a command or set its defaults
boot	Configure boot variables
`s0`	Type: bootvar use [show boot variables] for list of keywords
`uri0`	Type: uri Enter module image uri
module	Enter module number for the image
`module`	Type: integer Enter module number

Command Modes

/exec/configure

boot-install nxos

boot-install nxos uri0 | no boot-install nxos [uri0]

Syntax Description


no	Negate a command or set its defaults
boot-install	Configure boot variables
nxos	Configure NXOS image
`uri0`	Type: uri Enter NXOS image uri

Command Modes

/exec/configure

boot-order

boot-order new_id

Syntax Description


boot-order	The order at which a vdc will boot up. VDCs at the same level will be started parallely
`new_id`	Type: integer The order at which a vdc will boot up. VDCs at the same level will be started parallely

Command Modes

/exec/configure/vdc

boot auto-copy

[no] boot auto-copy

Syntax Description


no	Negate a command or set its defaults
boot	Configure boot variables
auto-copy	Turns on/off autocopy of bootvar images

Command Modes

/exec/configure

boot nxos (bootvar)

boot nxos uri0 [ [sup-1] [sup-2] ] | no boot nxos [ uri0 [ [sup-1] [sup-2] ] ]

Syntax Description


no	Negate a command or set its defaults
boot	Configure boot variables
nxos	Configure NXOS image
`uri0`	Type: uri Enter kickstart image uri
sup-1	Enter sup-1 to configure the 1st sup
sup-2	Enter sup-2 to configure the 2nd sup

Command Modes

/exec/configure

boot nxos (bootvar)

boot nxos uri0 | no boot nxos [uri0]

Syntax Description


no	Negate a command or set its defaults
boot	Configure boot variables
nxos	Configure NXOS image
`uri0`	Type: uri Enter NXOS image uri

Command Modes

/exec/configure

bootmode boot

[no] bootmode boot

Syntax Description


no	Negate a command or set its defaults
bootmode	set bootmode for all modules in the switch
boot	boot in boot mode

Command Modes

/exec/configure

bootmode extruntime

[no] bootmode extruntime

Syntax Description


no	Negate a command or set its defaults
bootmode	set bootmode for all modules in the switch
extruntime	boot in runtime mode with extended diags

Command Modes

/exec/configure

bootmode hitless

[no] bootmode hitless

Syntax Description


no	Negate a command or set its defaults
bootmode	set bootmode for all modules in the switch
hitless	boot in hitless mode

Command Modes

/exec/configure

bootmode module

[no] bootmode module module { boot | extruntime | hitless | netboot | nodiagruntime | runtime }

Syntax Description


no	Negate a command or set its defaults
bootmode	set bootmode for all modules in the switch
module	set bootmode for a given module in the switch
`module`	Type: integer please enter module number
boot	boot in boot mode
extruntime	boot in runtime mode with extended diags
hitless	boot in hitless mode
netboot	boot using boot netboot in runtime mode
nodiagruntime	boot in runtime mode without running any diags
runtime	boot in runtime mode with normal diags

Command Modes

/exec/configure

bootmode nodiagruntime

[no] bootmode nodiagruntime

Syntax Description


no	Negate a command or set its defaults
bootmode	set bootmode for all modules in the switch
nodiagruntime	boot in runtime mode without running any diags

Command Modes

/exec/configure

bootmode runtime

[no] bootmode runtime

Syntax Description


no	Negate a command or set its defaults
bootmode	set bootmode for all modules in the switch
runtime	boot in runtime mode with normal diags

Command Modes

/exec/configure

buffer-boost

[no] buffer-boost

Syntax Description


no	Negate a command or set its defaults
buffer-boost	Enable extra buffers for this interface

Command Modes

/exec/configure/if-ethernet-all
/exec/configure/if-eth-non-member
/exec/configure/if-port-channel

Bias-Free Language

Results

Chapter: B Commands

B Commands

bandwidth (if_manager)

Syntax Description

Command Modes

bandwidth (if_manager)

Syntax Description

Command Modes

bandwidth (qosmgr)

Syntax Description

Command Modes

bandwidth (svi)

Syntax Description

Command Modes

bandwidth (tm)

Syntax Description

Command Modes

banner motd

Syntax Description

Command Modes

bcm-shell module (syscli)

Syntax Description

Command Modes

bcm-shell module (syscli)

Syntax Description

Command Modes

beacon

Syntax Description

Command Modes

bestpath

Syntax Description

Command Modes

bfd-app session auto-expiry

Syntax Description

Command Modes

bfd-app session remove

Syntax Description

Command Modes

bfd-app session src-ip

Syntax Description

Command Modes

bfd (bgp_bfd)

Syntax Description

Command Modes

bfd (eigrp_bfd)

Syntax Description

Command Modes

bfd (isis_bfd)

Syntax Description

Command Modes

bfd (ospf_bfd)

Syntax Description

Command Modes

bfd authentication key-id

Syntax Description

Command Modes

bfd echo

Syntax Description

Command Modes

bfd echo-interface

Syntax Description

Command Modes

bfd interval min_rx multiplier

Syntax Description

Command Modes

bfd ipv4

Syntax Description

Command Modes

bfd move-session target

Syntax Description

Command Modes

bfd neighbor src-ip

Syntax Description

Command Modes

bfd optimize subinterface

Syntax Description

Command Modes