A Commands

aaa accounting default

[no] aaa accounting default { group s0 [ s1 [ s2 [ s3 [ s4 [ s5 [ s6 [s7] ] ] ] ] ] ] [none] | local [none1] | none2 }

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
accounting

Configure accounting methods
default

Configure default methods
group

Specify server groups to redirect the accounting logs
s0

Type: string

length: 127

Server group name
s1

Type: string

length: 127

Server group name
s2

Type: string

length: 127

Server group name
s3

Type: string

length: 127

Server group name
s4

Type: string

length: 127

Server group name
s5

Type: string

length: 127

Server group name
s6

Type: string

length: 127

Server group name
s7

Type: string

length: 127

Server group name
none

No accounting
none1

No accounting
none2

No accounting
local

Use local accounting

Command Modes

  • /exec/configure

aaa accounting onep default group

[no] aaa accounting onep default group grp_name+

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
accounting

configure accounting methods
onep

accounting methods for onep
default

default aaa methods
group

server group
grp_name

Type: string

server group name

Command Modes

  • /exec/configure

aaa authentication login ascii-authentication

[no] aaa authentication login ascii-authentication

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
authentication

Configure authentication methods
login

Configure methods for login
ascii-authentication

enable ascii authentication

Command Modes

  • /exec/configure

aaa authentication login console

[no] aaa authentication login console { group s0 [ none | s1 [ none | s2 [ none | s3 [ none | s4 [ none | s5 [ none | s6 [ none | s7 [ none ] ] ] ] ] ] ] ] | local | none }

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
authentication

Configure authentication methods
login

Configure methods for login
console

Configure console methods
group

Specify server groups
s0

Type: string

length: 127

Server group name
none

No authentication
s1

Type: string

length: 127

Server group name
none

No authentication
s2

Type: string

length: 127

Server group name
none

No authentication
s3

Type: string

length: 127

Server group name
none

No authentication
s4

Type: string

length: 127

Server group name
none

No authentication
s5

Type: string

length: 127

Server group name
none

No authentication
s6

Type: string

length: 127

Server group name
none

No authentication
s7

Type: string

length: 127

Server group name
none

No authentication
local

Use local username authentication
none

No authentication

Command Modes

  • /exec/configure

aaa authentication login default

[no] aaa authentication login default { group s0 [ none | s1 [ none | s2 [ none | s3 [ none | s4 [ none | s5 [ none | s6 [ none | s7 [ none ] ] ] ] ] ] ] ] | local | none }

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
authentication

Configure authentication methods
login

Configure methods for login
default

Configure default methods
group

Specify server groups
s0

Type: string

length: 127

Server group name
none

No authentication
s1

Type: string

length: 127

Server group name
none

No authentication
s2

Type: string

length: 127

Server group name
none

No authentication
s3

Type: string

length: 127

Server group name
none

No authentication
s4

Type: string

length: 127

Server group name
none

No authentication
s5

Type: string

length: 127

Server group name
none

No authentication
s6

Type: string

length: 127

Server group name
none

No authentication
s7

Type: string

length: 127

Server group name
none

No authentication
local

Use local username authentication
none

No authentication

Command Modes

  • /exec/configure

aaa authentication login enable

[no] aaa authentication login { mschap | mschapv2 | chap } enable

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
authentication

Configure authentication methods
login

Configure methods for login
mschap

MSCHAP authentication for login
mschapv2

MSCHAP V2 authentication for login
chap

CHAP authentication for login
enable

enable the authentication for login

Command Modes

  • /exec/configure

aaa authentication login error-enable

[no] aaa authentication login error-enable

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
authentication

Configure authentication methods
login

Configure methods for login
error-enable

enable display of error message on login failures

Command Modes

  • /exec/configure

aaa authentication login fallback error local

[no] aaa authentication login { default | console } fallback error local

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
authentication

Configure authentication methods
login

Configure methods for login
default

Configure default methods
console

Configure console methods
fallback

Configure fallback behavior
error

Fallback in case all AAA servers configured for remote authentication are unreachable (Authentication error)
local

Fallback to local authentication

Command Modes

  • /exec/configure

aaa authentication login password-aging enable

[no] aaa authentication login password-aging enable

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
authentication

Configure authentication methods
login

Configure methods for login
password-aging

password-aging authentication for login
enable

enable password-aging notification

Command Modes

  • /exec/configure

aaa authentication onep default group

[no] aaa authentication onep default group grp_name+

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
authentication

Configure authentication methods
onep

authentication methods for onep
default

default aaa methods
group

server group
grp_name

Type: string

server group name

Command Modes

  • /exec/configure

aaa authorization

[no] aaa authorization { commands | config-commands } { default | console } { group grp_name+ [ local | none ] | local | none }

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
authorization

Configure authorization methods
commands

Authorization for all exec-mode commands
config-commands

Authorization for config commands
default

Configure default methods
console

Configure methods console
group

Specify server groups
grp_name

Type: string

antipattern: local | none

length: 127

Server group name
local

Use local RBACL based authorization
none

No authorization

Command Modes

  • /exec/configure

aaa authorization default

[no] aaa authorization { ssh-publickey | ssh-certificate } default { group s0 [ s1 [ s2 [ s3 [ s4 [ s5 [ s6 [ s7 ] ] ] ] ] ] ] | local }

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
authorization

Configure authorization methods
ssh-publickey

Configure ssh publickey
ssh-certificate

Configure ssh certificate
default

Configure default ssh methods
group

Specify server groups
s0

Type: string

length: 127

Server group name
s1

Type: string

length: 127

Server group name
s2

Type: string

length: 127

Server group name
s3

Type: string

length: 127

Server group name
s4

Type: string

length: 127

Server group name
s5

Type: string

length: 127

Server group name
s6

Type: string

length: 127

Server group name
s7

Type: string

length: 127

Server group name
local

Use local username authentication

Command Modes

  • /exec/configure

aaa group server ldap

[no] aaa group server ldap s0

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
group

Configure aaa server group
server

Configure aaa server group
ldap

LDAP server group name
s0

Type: string

length: 64

LDAP server group name

Command Modes

  • /exec/configure

aaa group server radius

[no] aaa group server radius s0

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
group

Configure aaa server group
server

Configure aaa server group
radius

RADIUS server group name
s0

Type: string

length: 127

RADIUS server group name

Command Modes

  • /exec/configure

aaa group server tacacs

[no] aaa group server tacacs s0

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
group

Configure aaa server group
server

Configure aaa server group
tacacs

TACACS+ server group name
s0

Type: string

length: 127

TACACS+ server group name

Command Modes

  • /exec/configure

aaa test-authentication

[no] aaa test-authentication

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
test-authentication

Test aaa authentication

Command Modes

  • /exec/configure

aaa test-radius-authentication

[no] aaa test-radius-authentication

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
test-radius-authentication

Test aaa radius authentication

Command Modes

  • /exec/configure

aaa user default-role

[no] aaa user default-role

Syntax Description

no

Negate a command or set its defaults
aaa

Configure aaa functions
user

Remotely authenticated user
default-role

Default role assigned by aaa-admin for remote authentication

Command Modes

  • /exec/configure

abort (ssnmgr)

abort

Syntax Description

abort

Abort the current configuration session

Command Modes

  • /exec/configure

abort (stp_full)

abort

Syntax Description

abort

Exit region configuration mode, aborting changes

Command Modes

  • /exec/configure/spanning-tree/mst/configuration

absolute

{ [seqno] | no } absolute { start stime sday smonth syear [ end etime eday emonth eyear ] | end etime eday emonth eyear }

Syntax Description

seqno

Type: uinteger

min: 1  max: 4294967295  

Sequence number
no

Negate a command or set its defaults
absolute

Absolute time and date
start

Starting time and date
stime

Type: time

Starting time
sday

Type: integer

min: 1  max: 31  

Day of the month
smonth

Month

January  value: 1
January
February  value: 2
February
March  value: 3
March
April  value: 4
April
May  value: 5
May
June  value: 6
June
July  value: 7
July
August  value: 8
August
September  value: 9
September
October  value: 10
October
November  value: 11
November
December  value: 12
December
syear

Type: integer

min: 2000  max: 3000  

Year
end

Ending time and date
etime

Type: time

Ending time
eday

Type: integer

min: 1  max: 31  

Day of the month
emonth

Month

January  value: 1
January
February  value: 2
February
March  value: 3
March
April  value: 4
April
May  value: 5
May
June  value: 6
June
July  value: 7
July
August  value: 8
August
September  value: 9
September
October  value: 10
October
November  value: 11
November
December  value: 12
December
eyear

Type: integer

min: 2000  max: 3000  

Year

Command Modes

  • /exec/configure/timerange

absolute-timeout

absolute-timeout i0 | no absolute-timeout [i0]

Syntax Description

no

Negate a command or set its defaults
absolute-timeout

Configure absolute timeout
i0

Type: integer

min: 0  max: 525600  

Enter timeout in minutes, 0 to disable

Command Modes

  • /exec/configure/line

accept-lifetime local

accept-lifetime [local] stime { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } sday syear { duration dsec | infinite | etime { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } eday eyear } | no accept-lifetime [ [local] stime { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } sday syear { duration dsec | infinite | etime { month_a | month_b | month_c | month_d | month_e | month_f | month_g | month_h | month_i | month_j | month_k | month_l } eday eyear } ]

Syntax Description

no

Negate a command or set its defaults
accept-lifetime

Set accept lifetime of key
local

Specify time in local timezone
stime

Type: string

pattern: (0?[0-9] | 1[0-9] | 2[0-3]):([0-5]?[0-9]):([0-5]?[0-9])

length: 8

HH:MM:SS Time to start <0-23>:<0-59>:<0-59>
etime

Type: string

pattern: (0?[0-9] | 1[0-9] | 2[0-3]):([0-5]?[0-9]):([0-5]?[0-9])

length: 8

HH:MM:SS Time to end <0-23>:<0-59>:<0-59>
month_a
month_b
month_c
month_d
month_e
month_f
month_g
month_h
month_i
month_j
month_k
month_l
sday

Type: integer

min: 1  max: 31  

Day of the month to start
eday

Type: integer

min: 1  max: 31  

Day of the month to end
syear

Type: integer

min: 1993  max: 2035  

Year to start
eyear

Type: integer

min: 1993  max: 2035  

Year to start
duration

Set key lifetime duration
dsec

Type: integer

min: 1  max: 2147483646  

Duration in seconds
infinite

Never Expires

Command Modes

  • /exec/configure/keychain-key

access-class

[no] access-class name inout

Syntax Description

no

Negate a command or set its defaults
access-class

Specify IPv4 access control for packets
name

Type: string

length: 64

List name
inout

Traffic direction

in  value: 0
Inbound packets
out  value: 1
Outbound packets

Command Modes

  • /exec/configure/line

access-list capture

[no] { platform | hardware } access-list capture

Syntax Description

no

Negate a command or set its defaults
platform

Platform configuration commands
hardware

Hardware Internal Information
access-list

Access Control List
capture

Configure ACL capture Not available in this release.

Command Modes

  • /exec/configure

access-list cleanup-unused-policies

[no] access-list cleanup-unused-policies

Syntax Description

no

Negate a command or set its defaults
access-list

Configure access control list parameters
cleanup-unused-policies

Enable implicit cleanup of ACL policies on shutdown ports

Command Modes

  • /exec/configure

access-list fp_dnl

[no] { platform | hardware } access-list fp_dnl

Syntax Description

no

Negate a command or set its defaults
platform

Platform configuration commands
hardware

Hardware Internal Information
access-list

Access control list
fp_dnl

Fabric path - do not learn mac from broadcast Not available in this release.

Command Modes

  • /exec/configure

access-list update

[no] { platform | hardware } access-list update { atomic | default-result permit }

Syntax Description

no

Negate a command or set its defaults
platform

Platform configuration commands
hardware

Hardware Internal Information
access-list

Access Control List
update

Configure atomic/non-atomic update and default-result
atomic

Enable atomic update of access-list in hardware
default-result

Default access-list result during non-atomic hardware update
permit

Permit all packets during non-atomic update

Command Modes

  • /exec/configure

acllog match-log-level

[no] acllog match-log-level level

Syntax Description

no

Negate a command or set its defaults
acllog

Configure ACL logging
match-log-level

acllog logging level
level

Type: uinteger

min: 0  max: 7  default: 6

match log level

Command Modes

  • /exec/configure

action

[no] action { drop [log] | forward | redirect intf }

Syntax Description

no

Negate a command or set its defaults
action

Specify the action clause
drop

Drop matched packets
log

Log matched packets
forward

Forward matched packets
redirect

Redirect matched packets to the specified interface(s)
intf

Type: interface

Interface traffic is redirected to

Command Modes

  • /exec/configure/vacl

action cli

action label cli [local] vsh_cmd

Syntax Description

action

Configure the actions to be executed
label

Type: string

Enter the label <num1>[.<num2>] for action order; num2 must be 0-9
cli

Configure a VSH CLI action
local

Execute the action in the same card on which the event happens
vsh_cmd

Type: remainder

Enter the vsh command

Command Modes

  • /exec/configure/event-manager-applet

action counter name value op

action label counter name counter-name value counter-value op op-val

Syntax Description

no

Negate a command or set its defaults
action

Configure the actions to be executed
label

Type: string

Enter the label <num1>[.<num2>] for action order; num2 must be 0-9
counter

Specify the name of the counter
name

Specify the name of the counter
counter-name

Type: string

length: 28

Name of the counter
value

Specify the value to be applied to the counter
counter-value

Type: string

Enter an integer value or a $ prefixed name (parameter substitution)
op

Specify the operator to be applied
op-val

Enter the value of the operator

nop  value: 1
do nothing, just print the value
set  value: 2
set the counter to this value
inc  value: 3
Increment the counter by this value
dec  value: 4
Decrement the counter by this value

Command Modes

  • /exec/configure/event-manager-applet

action event-default

action label event-default

Syntax Description

action

Configure the actions to be executed
label

Type: string

Enter the label <num1>[.<num2>] for action order; num2 must be 0-9
event-default

Do default action for the event

Command Modes

  • /exec/configure/event-manager-applet

action exceptionlog module syserr devid errtype errcode phylayer ports harderror

[no] action label exceptionlog module mod syserr syserr devid id errtype type errcode code phylayer phy ports list harderror hard [ desc str ]

Syntax Description

no

Negate a command or set its defaults
action

Configure the actions to be executed
label

Type: string

Enter the label <num1>[.<num2>] for action order; num2 must be 0-9
exceptionlog

Exception log
module

Enter a module number
mod

Type: string

Enter module number (integer value) or a $ prefixed parameter name
syserr

Enter syserr
syserr

Type: string

Enter syserr code (hex value) or a $ prefixed parameter name
devid

Enter device id
id

Type: string

Enter device id (integer value) or a $ prefixed parameter name
errtype

Enter error type
type

Type: string

Error error type (integer value) or a $ prefixed parameter name
errcode

Enter error code
code

Type: string

Enter error code (hex value) or a $ prefixed parameter name
phylayer

Enter phy layer
phy

Type: string

Enter phy layer (integer value) or a $ prefixed parameter name
ports

Enter failed ports
list

Type: string

List of ports. Example: 1,3,7-15
harderror

Irrecoverable error?
hard

Type: integer

min: 0  max: 4  

Error sub-category
desc

Enter error description
str

Type: string

Error description

Command Modes

  • /exec/configure/event-manager-applet

action forceshut reset-reason

[no] action label2 forceshut [ module { module | mod-str } | s0 { santa-cruz-range | santa-cruz-string } ] reset-reason reset_reason_string

Syntax Description

no

Negate a command or set its defaults
action

Configure the actions to be executed
label2

Type: string

Enter the label <num1>[.<num2>] for action order; num2 must be 0-9
forceshut

Force the entire switch to shut down
module

Optional. Module to be forced to shut down(optional argument)
module

Type: integer

please enter the module number
mod-str

Type: string

Enter the module number (integer value) or a $ prefixed parameter name
s0

Type: xbar-str

Optional. Xbar to be forced to shut down(optional argument)
santa-cruz-range

Type: integer

please enter the xbar number
santa-cruz-string

Type: string

Enter the xbar number (integer value) or a $ prefixed parameter name
reset-reason

Shut down (with reset-reason)
reset_reason_string

Type: string

please enter reset_reason_string in quotes

Command Modes

  • /exec/configure/event-manager-applet

action overbudgetshut

[no] action label overbudgetshut [ module { module | mod-str } ]

Syntax Description

no

Negate a command or set its defaults
action

Configure the actions to be executed
label

Type: string

Enter the label <num1>[.<num2>] for action order; num2 must be 0-9
overbudgetshut

Shut down the specified LCs due to power over budget
module

Optional. Module to be force-shut(optional arg)
module

Type: integer-mrange

please enter the module number
mod-str

Type: string

Enter the module number (integer value) or a $ prefixed parameter name

Command Modes

  • /exec/configure/event-manager-applet

action policy-default

action label policy-default

Syntax Description

action

Configure the actions to be executed
label

Type: string

Enter the label <num1>[.<num2>] for action order; num2 must be 0-9
policy-default

Do default action(s) of the policy being overridden

Command Modes

  • /exec/configure/event-manager-applet

action publish-event sub-system type

action label publish-event sub-system sub-system-id type event-type [ arg1 data1 ] [ arg2 data2 ] [ arg3 data3 ] [ arg4 data4 ]

Syntax Description

action

Configure the actions to be executed
label

Type: string

Enter the label <num1>[.<num2>] for action order; num2 must be 0-9
publish-event

Publish an application specific event
sub-system

Sub-system ID to which the application event belongs
sub-system-id

Type: uinteger

min: 1  max: 4294967295  

Sub-system ID value
type

Event type value
event-type

Type: uinteger

min: 1  max: 4294967295  

Event type value
arg1

User specified data to be passed when the event is published
data1

Type: string

length: 84

User specified data value
arg2

User specified data to be passed when the event is published
data2

Type: string

length: 84

User specified data value
arg3

User specified data to be passed when the event is published
data3

Type: string

length: 84

User specified data value
arg4

User specified data to be passed when the event is published
data4

Type: string

length: 84

User specified data value

Command Modes

  • /exec/configure/event-manager-applet

action reload

[no] action label reload [ module { module | mod-str } ]

Syntax Description

no

Negate a command or set its defaults
action

Configure the actions to be executed
label

Type: string

Enter the label <num1>[.<num2>] for action order; num2 must be 0-9
reload

Reload the system or a specific module
module

Reload a specific module
module

Type: integer

please enter the module number
mod-str

Type: string

Enter the module number (integer value) or a $ prefixed parameter name

Command Modes

  • /exec/configure/event-manager-applet

action snmp-trap

action label snmp-trap [ intdata1 integer-data1 ] [ intdata2 integer-data2 ] [ strdata string-data ]

Syntax Description

action

Configure the actions to be executed
label

Type: string

Enter the label <num1>[.<num2>] for action order; num2 must be 0-9

Command Modes

  • /exec/configure/event-manager-applet

action syslog msg

action label syslog [ priority { prio | prio-str } ] msg msg-text

Syntax Description

action

Configure the actions to be executed
label

Type: string

Enter the label <num1>[.<num2>] for action order; num2 must be 0-9
syslog

Generate a syslog message
priority

Priority of the syslog message
prio

Enter the priority

emergencies  value: 0
Syslog level emergency
alerts  value: 1
Syslog level alert
critical  value: 2
Syslog level critical
errors  value: 3
Syslog level error
warnings  value: 4
Syslog level warning
notifications  value: 5
Syslog level notification
informational  value: 6
Syslog level informational
debugging  value: 7
Syslog level debugging
prio-str

Type: string

pattern: [$][a-zA-Z0-9_]+

Enter a valid $ prefixed name, for parameter substitution
msg

Enter the message for the syslog
msg-text

Type: remainder

The message text

Command Modes

  • /exec/configure/event-manager-applet

activate

[no] activate

Syntax Description

no

Negate a command or set its defaults
activate

Activate configured virtual service

Command Modes

  • /exec/configure/virt-serv

additional-paths receive

[no] additional-paths receive

Syntax Description

no

Negate a command or set its defaults
additional-paths

Additional paths configuration
receive

Additional paths Receive capability

Command Modes

  • /exec/configure/router-bgp/router-bgp-af
  • /exec/configure/router-bgp/router-bgp-af-vpnv4
  • /exec/configure/router-bgp/router-bgp-af-vpnv6
  • /exec/configure/router-bgp/router-bgp-af-ipv6-label

additional-paths selection route-map

[no] additional-paths selection route-map rmap-name

Syntax Description

no

Negate a command or set its defaults
additional-paths

Additional paths configuration
selection

Additional paths selection
route-map

Route-map for additional paths selection
rmap-name

Type: string

pattern: [!-~]*

length: 63

Route-map name

Command Modes

  • /exec/configure/router-bgp/router-bgp-af
  • /exec/configure/router-bgp/router-bgp-af-vpnv4
  • /exec/configure/router-bgp/router-bgp-af-vpnv6
  • /exec/configure/router-bgp/router-bgp-af-ipv6-label

additional-paths send

[no] additional-paths send

Syntax Description

no

Negate a command or set its defaults
additional-paths

Additional paths configuration
send

Additional paths Send capability

Command Modes

  • /exec/configure/router-bgp/router-bgp-af
  • /exec/configure/router-bgp/router-bgp-af-vpnv4
  • /exec/configure/router-bgp/router-bgp-af-vpnv6
  • /exec/configure/router-bgp/router-bgp-af-ipv6-label

address-family ipv4 (bgp)

[no] address-family ipv4 { unicast | multicast }

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv4

Configure IPv4 address-family
unicast

Configure unicast address-family
multicast

Configure multicast address-family

Command Modes

  • /exec/configure/router-bgp/router-bgp-vrf

address-family ipv4 (bgp)

[ no | default ] address-family ipv4 { unicast | multicast }

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
address-family

Configure an address-family for peer
ipv4

Configure IPv4 address-family
unicast

Configure Unicast sub-address-family
multicast

Configure Multicast sub-address-family

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor
  • /exec/configure/router-bgp/router-bgp-template-neighbor
  • /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 (bgp)

[ no | default ] address-family ipv4 { unicast | multicast }

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
address-family

Configure an address-family for peer
ipv4

Configure IPv4 address-family
unicast

Configure Unicast sub-address-family
multicast

Configure Multicast sub-address-family

Command Modes

  • /exec/configure/router-bgp/router-bgp-vrf-neighbor
  • /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

address-family ipv4 (bgp)

[no] address-family ipv4 { unicast | multicast }

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv4

Configure IPv4 address-family
unicast

Configure unicast address-family
multicast

Configure multicast address-family

Command Modes

  • /exec/configure/router-bgp

address-family ipv4 mdt (bgp)

[ no | default ] address-family ipv4 mdt

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
address-family

Configure an address-family
ipv4

Configure IPv4 address-family
mdt

Configure Multicast Distribution Tree Not available in this release.

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor
  • /exec/configure/router-bgp/router-bgp-template-neighbor
  • /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv4 mdt (bgp)

[no] address-family ipv4 mdt

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv4

Configure IPv4 address-family
mdt

Configure Multicast Distribution Tree Not available in this release.

Command Modes

  • /exec/configure/router-bgp

address-family ipv4 unicast (rip)

[no] address-family ipv4 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv4

Configure IPv4 address-family
unicast

Configure unicast address-family

Command Modes

  • /exec/configure/router-rip/router-rip-vrf

address-family ipv4 unicast (eigrp)

[no] address-family ipv4 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv4

Configure IPv4 address-family
unicast

Configure unicast address-family

Command Modes

  • /exec/configure/router-eigrp/router-eigrp-vrf-common

address-family ipv4 unicast (isis)

[no] address-family ipv4 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv4

Configure IPv4 address-family
unicast

Configure unicast address-family

Command Modes

  • /exec/configure/router-isis/router-isis-vrf-common

address-family ipv4 unicast (l3vm)

[no] address-family ipv4 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure address family
ipv4

Configure IPv4 address family

Command Modes

  • /exec/configure/vrf

address-family ipv4 unicast (rip)

[no] address-family ipv4 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv4

Configure IPv4 address-family
unicast

Configure unicast address-family

Command Modes

  • /exec/configure/router-rip

address-family ipv6 (bgp)

[no] address-family ipv6 { unicast | multicast }

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv6

Configure IPv6 address-family
unicast

Configure unicast address-family
multicast

Configure multicast address-family

Command Modes

  • /exec/configure/router-bgp/router-bgp-vrf

address-family ipv6 (bgp)

[ no | default ] address-family ipv6 { unicast | multicast }

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
address-family

Configure an address-family for peer
ipv6

Configure IPv6 address-family
unicast

Configure Unicast sub-address-family
multicast

Configure Multicast sub-address-family

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor
  • /exec/configure/router-bgp/router-bgp-template-neighbor
  • /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv6 (bgp)

[ no | default ] address-family ipv6 { unicast | multicast }

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
address-family

Configure an address-family for peer
ipv6

Configure IPv6 address-family
unicast

Configure Unicast sub-address-family
multicast

Configure Multicast sub-address-family

Command Modes

  • /exec/configure/router-bgp/router-bgp-vrf-neighbor
  • /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

address-family ipv6 (bgp)

[no] address-family ipv6 { unicast | multicast }

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv6

Configure IPv6 address-family
unicast

Configure unicast address-family
multicast

Configure multicast address-family

Command Modes

  • /exec/configure/router-bgp

address-family ipv6 labeled-unicast (bgp)

[ no | default ] address-family ipv6 labeled-unicast

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
address-family

Configure an address-family for peer
ipv6

Configure IPv6 address-family
labeled-unicast

Configure labeled unicast sub-address-family Not available in this release.

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor
  • /exec/configure/router-bgp/router-bgp-template-neighbor
  • /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family ipv6 labeled-unicast (bgp)

[no] address-family ipv6 labeled-unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv6

Configure IPv6 address-family
labeled-unicast

Configure labeled unicast sub-address-family Not available in this release.

Command Modes

  • /exec/configure/router-bgp

address-family ipv6 unicast (ospfv3)

[no] address-family ipv6 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv6

Configure IPv6 address-family
unicast

Configure IPv6 unicast address-family

Command Modes

  • /exec/configure/router-ospf3/vrf

address-family ipv6 unicast (rip)

[no] address-family ipv6 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv6

Configure IPv6 address-family
unicast

Configure unicast address-family

Command Modes

  • /exec/configure/router-rip/router-rip-vrf

address-family ipv6 unicast (eigrp)

[no] address-family ipv6 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv6

Configure IPv6 address-family
unicast

Configure unicast address-family

Command Modes

  • /exec/configure/router-eigrp/router-eigrp-vrf-common

address-family ipv6 unicast (isis)

[no] address-family ipv6 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv6

Configure IPv6 address-family
unicast

Configure unicast address-family

Command Modes

  • /exec/configure/router-isis/router-isis-vrf-common

address-family ipv6 unicast (l3vm)

[no] address-family ipv6 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure address family
ipv6

Configure IPv6 address family

Command Modes

  • /exec/configure/vrf

address-family ipv6 unicast (ospfv3)

[no] address-family ipv6 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv6

Configure IPv6 address-family
unicast

Configure IPv6 unicast address-family

Command Modes

  • /exec/configure/router-ospf3

address-family ipv6 unicast (rip)

[no] address-family ipv6 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
ipv6

Configure IPv6 address-family
unicast

Configure unicast address-family

Command Modes

  • /exec/configure/router-rip

address-family l2vpn vpls (bgp)

[ no | default ] address-family l2vpn vpls

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
address-family

Configure an address-family
l2vpn

Configure L2VPN address-family Not available in this release.
vpls

Configure L2VPN VPLS address-family

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor
  • /exec/configure/router-bgp/router-bgp-template-neighbor
  • /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family l2vpn vpls (bgp)

[no] address-family l2vpn vpls

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
l2vpn

Configure L2VPN address-family Not available in this release.
vpls

Configure L2VPN VPLS address-family

Command Modes

  • /exec/configure/router-bgp

address-family vpnv4 unicast (bgp)

[ no | default ] address-family vpnv4 unicast

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
address-family

Configure an address-family for peer
vpnv4

Configure IPv4 VPN address-family Not available in this release.
unicast

Configure Unicast sub-address-family

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor
  • /exec/configure/router-bgp/router-bgp-template-neighbor
  • /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family vpnv4 unicast (bgp)

[no] address-family vpnv4 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
vpnv4

Configure IPv4 VPN address-family Not available in this release.
unicast

Configure Unicast sub-address-family

Command Modes

  • /exec/configure/router-bgp

address-family vpnv6 unicast (bgp)

[ no | default ] address-family vpnv6 unicast

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
address-family

Configure an address-family for peer
vpnv6

Configure IPv6 VPN address-family Not available in this release.
unicast

Configure Unicast sub-address-family

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor
  • /exec/configure/router-bgp/router-bgp-template-neighbor
  • /exec/configure/router-bgp/router-bgp-prefixneighbor

address-family vpnv6 unicast (bgp)

[no] address-family vpnv6 unicast

Syntax Description

no

Negate a command or set its defaults
address-family

Configure an address-family
vpnv6

Configure IPv6 VPN address-family Not available in this release.
unicast

Configure Unicast sub-address-family

Command Modes

  • /exec/configure/router-bgp

address

address ip_address [secondary] | no address [ ip_address [secondary] ]

Syntax Description

no

Negate a command or set its defaults
address

Add an IP address to the vr
ip_address

Type: ipaddr

ip address
secondary

a virtual IP address without owner

Command Modes

  • /exec/configure/if-eth-any/vrrp

adjacency-check

[no] adjacency-check

Syntax Description

no

Negate a command or set its defaults
adjacency-check

Adjacency's protocol support consistency check

Command Modes

  • /exec/configure/router-isis/router-isis-af-common

advertisement-interval

advertisement-interval interval_time | no advertisement-interval [interval_time]

Syntax Description

no

Negate a command or set its defaults
advertisement-interval

Set the time interval between advertisement
interval_time

Type: integer

min: 1  max: 255  

Time interval (in seconds) between advertisements

Command Modes

  • /exec/configure/if-eth-any/vrrp

aggregate-address (bgp)

[no] aggregate-address ipv6-prefix [ as-set | summary-only | suppress-map suppress-rmap | advertise-map advertise-rmap | attribute-map attribute-rmap ] +

Syntax Description

no

Negate a command or set its defaults
aggregate-address

Configure BGP aggregate IPv6 prefixes
ipv6-prefix

Type: ipv6prefix

IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128
as-set

Generate AS-SET information
summary-only

Don't advertise more specifics
suppress-map

Conditionally filter more specific routes
advertise-map

Select attribute information from specific routes
attribute-map

Set attribute information of aggregate
advertise-rmap

Type: string

pattern: [!-~]*

length: 63

Route-map name
suppress-rmap

Type: string

pattern: [!-~]*

length: 63

Route-map name
attribute-rmap

Type: string

pattern: [!-~]*

length: 63

Route-map name

Command Modes

  • /exec/configure/router-bgp/router-bgp-af-ipv6
  • /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

aggregate-address (bgp)

[no] aggregate-address { ip-addr ip-mask | ip-prefix } [ as-set | summary-only | suppress-map suppress-rmap | advertise-map advertise-rmap | attribute-map attribute-rmap ] +

Syntax Description

no

Negate a command or set its defaults
aggregate-address

Configure BGP aggregate prefixes
ip-addr

Type: ipaddr

Aggregate address
ip-mask

Type: ipaddr

Aggregate mask
ip-prefix

Type: ipprefix

Aggregate prefix
summary-only

Don't advertise more specifics
as-set

Generate AS-SET information
suppress-map

Conditionally filter more specific routes
advertise-map

Select attribute information from specific routes
attribute-map

Set attribute information of aggregate
advertise-rmap

Type: string

pattern: [!-~]*

length: 63

Route-map name
suppress-rmap

Type: string

pattern: [!-~]*

length: 63

Route-map name
attribute-rmap

Type: string

pattern: [!-~]*

length: 63

Route-map name

Command Modes

  • /exec/configure/router-bgp/router-bgp-af-ipv4
  • /exec/configure/router-bgp/router-bgp-vrf-af-ipv4

alert-group user-def-cmd

[no] alert-group { Configuration | Diagnostic | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test } user-def-cmd s0

Syntax Description

no

Negate a command or set its defaults
alert-group

alert group
user-def-cmd

configure a cli command for an alert group
s0

Type: remainder

A valid CLI command
Environmental

Power,fan,temperature related events
Inventory

Inventory status events
License

Events related to licensing
Linecard-Hardware

Linecard related events
Supervisor-Hardware

Supervisor related events
Syslog-group-port

Events related to syslog messages filed by port manager
System

Software related events
Test

User generated test events
Configuration

Events related to Configuration
Diagnostic

Events related to Diagnostic

Command Modes

  • /exec/configure/callhome

allocate-label

[no] allocate-label { all | route-map rmap-name }

Syntax Description

no

Negate a command or set its defaults
allocate-label

Configure label allocation for this AF Not available in this release.
all

Allocate labels for all routes
route-map

Allocate labels for selected routes
rmap-name

Type: string

pattern: [!-~]*

length: 63

Route-map name

Command Modes

  • /exec/configure/router-bgp/router-bgp-af-ipv6

allocate2 fcoe-vlan-range

allocate2 fcoe-vlan-range [vlan_range] [ from vdcs vdc_names ] | no allocate2 fcoe-vlan-range [ vlan_range | from vdcs vdc_names ]

Syntax Description

no

Negate a command or set its defaults
allocate2

Assign interfaces to vdc
fcoe-vlan-range

vlans reserved for FCoE Not available in this release.
vlan_range

Type: integer-mrange

vlans reserved for FCoE
from

which vdcs will be sharing ports with the FCoE vdc
vdcs

which vdcs will be sharing ports with the FCoE vdc
vdc_names

Type: userdef

which vdcs will be sharing porst with the FCoE vdc

Command Modes

  • /exec/configure/vdc

allocate3 shared interface3

[no] allocate3 shared interface3 sinterface-id

Syntax Description

no

Negate a command or set its defaults
allocate3

Assign interfaces to vdc
interface3

Assign interface range to vdc
sinterface-id

Type: interface-mrange

Assign interface range to vdc
shared

Shared this port using the reserved FCoE vlans Not available in this release.

Command Modes

  • /exec/configure/vdc

allow delete boot-image

[no] allow delete boot-image [retain]

Syntax Description

no

Negate a command or set its defaults
allow

allow kickstart or system image to be deleted
delete

allow delete or overwrite of image file
boot-image

image file
retain

retain this command after reboot

Command Modes

  • /exec

allow feature-set

[no] allow feature-set fs

Syntax Description

no

Negate a command or set its defaults
allow

Used to change permisions inside a vdc
feature-set

Change which feature-sets the user is able to enable inside the vdc
fs

Type: userdef

installed feature-sets

Command Modes

  • /exec/configure/vdc

allowas-in

[ no | default ] allowas-in [allowas-in-cnt]

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
allowas-in

Accept as-path with my AS present in it
allowas-in-cnt

Type: uinteger

min: 1  max: 10  

Number of occurrences of AS number, default is 3

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6
  • /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv4
  • /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv6
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls

area (ospf)

area area-id-ip default-cost cost | no area area-id-ip default-cost [cost]

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
default-cost

Specify default-cost for default summary LSA
cost

Type: integer

min: 0  max: 16777215  

Cost value

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

area (ospfv3)

area area-id-ip nssa translate type7 { always [supress-fa] | never | supress-fa } | no area area-id-ip nssa translate type7 [ always [supress-fa] | never | supress-fa ]

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
nssa

Configure area as NSSA
translate

Translate LSA
type7

From NSSA-external (Type 7) to AS-external (Type 5)
always

Always translate LSAs
never

Never translate LSAs
supress-fa

Supress forwarding address in translated LSAs

Command Modes

  • /exec/configure/router-ospf3
  • /exec/configure/router-ospf3/vrf

area (ospf)

area area-id-ip nssa translate type7 { always [supress-fa] | never | supress-fa } | no area area-id-ip nssa translate type7 [ always [supress-fa] | never | supress-fa ]

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
nssa

Configure area as NSSA
translate

Translate LSA
type7

From Type 7 to Type 5
always

Always translate LSAs
never

Never translate LSAs
supress-fa

Supress forwarding address in translated LSAs

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

area (ospfv3)

area area-id-ip default-cost cost | no area area-id-ip default-cost [cost]

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
default-cost

Specify default-cost for default inter-area-prefix LSA
cost

Type: integer

min: 0  max: 16777215  

Cost value

Command Modes

  • /exec/configure/router-ospf3/router-ospf3-af-ipv6
  • /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

area (ospfv3)

area area-id-ip filter-list route-map { policy-name | rtr_pol_name } { in | out } | no area area-id-ip filter-list route-map { policy-name | rtr_pol_name } [ in | out ]

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
filter-list

Filter prefixes between OSPF areas
route-map

Name of filter policy
policy-name

Type: string

pattern: [!-~]*

length: 63

Route-map name
rtr_pol_name

Type: string

An existing routing-rules policy
in

Filter networks sent to this area
out

Filter networks sent from this area

Command Modes

  • /exec/configure/router-ospf3/router-ospf3-af-ipv6
  • /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

area (ospf)

area area-id-ip filter-list route-map { policy-name | rtr_pol_name } { in | out } | no area area-id-ip filter-list route-map { policy-name | rtr_pol_name } [ in | out ]

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
filter-list

Filter prefixes between OSPF areas
route-map

Name of filter policy
policy-name

Type: string

pattern: [!-~]*

length: 63

Route-map name
rtr_pol_name

Type: string

An existing routing-rules policy
in

Filter networks sent to this area
out

Filter networks sent from this area

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

area authentication

[no] area area-id-ip authentication [message-digest]

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
authentication

Enable authentication for the area
message-digest

Use message-digest authentication

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

area nssa (ospf)

[no] area area-id-ip nssa [no-summary] [no-redistribution] [ default-information-originate [ route-map policy-name ] ] +

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
nssa

Configure area as NSSA
no-summary

Do not send summary LSAs into NSSA area
no-redistribution

Do not send redistributed LSAs into NSSA area
default-information-originate

Originate Type-7 default LSA into NSSA area
route-map

Policy to control distribution of default route
policy-name

Type: string

pattern: [!-~]*

length: 63

Route-map name

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

area nssa (ospfv3)

[no] area area-id-ip nssa [no-summary] [no-redistribution] [ default-information-originate [ route-map policy-name ] ] +

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
nssa

Configure area as NSSA
no-summary

Do not send summary LSAs into NSSA area
no-redistribution

Do not send redistributed LSAs into NSSA area
default-information-originate

Originate Type-7 default LSA into NSSA area
route-map

Policy to control distribution of default route
policy-name

Type: string

pattern: [!-~]*

length: 63

Route-map name

Command Modes

  • /exec/configure/router-ospf3
  • /exec/configure/router-ospf3/vrf

area range (ospf)

[no] area area-id-ip range { ip-dest ip-mask | ip-prefix } [not-advertise] [ cost conf-cost ] +

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
range

Configure an address range for an area
ip-dest

Type: ipaddr

IP prefix format: i.i.i.i
ip-mask

Type: ipaddr

IP network mask format: m.m.m.m
ip-prefix

Type: ipprefix

IP prefix format: x.x.x.x/ml
not-advertise

Suppress advertising the specified range
cost

Cost to use for range
conf-cost

Type: uinteger

min: 0  max: 16777215  

Cost value

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

area range (ospfv3)

[no] area area-id-ip range ipv6-prefix [not-advertise] [ cost conf-cost ] +

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
range

Configure an address range for an area
ipv6-prefix

Type: ipv6prefix

IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128
not-advertise

Suppress advertising the specified range
cost

Cost to use for range
conf-cost

Type: uinteger

min: 0  max: 16777215  

Cost value

Command Modes

  • /exec/configure/router-ospf3/router-ospf3-af-ipv6
  • /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

area sham-link

[no] area area-id-ip sham-link source-address dest-address

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
sham-link

Define a sham link and its parameters Not available in this release.
source-address

Type: ipaddr

IP addr associated with sham-link source
dest-address

Type: ipaddr

IP addr associated with sham-link destination

Command Modes

  • /exec/configure/router-ospf/vrf

area stub (ospf)

[no] area area-id-ip stub [no-summary]

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
stub

Configure area as a stub
no-summary

Prevent ABR from sending summary LSAs into stub area

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

area stub (ospfv3)

[no] area area-id-ip stub [no-summary]

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
stub

Configure area as a stub
no-summary

Prevent ABR from sending summary LSAs into stub area

Command Modes

  • /exec/configure/router-ospf3
  • /exec/configure/router-ospf3/vrf

area virtual-link (ospf)

[no] area area-id-ip virtual-link routerid

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
virtual-link

Define a virtual link and its parameters
routerid

Type: ipaddr

Router ID associated with virtual link neighbor

Command Modes

  • /exec/configure/router-ospf/vrf

area virtual-link (ospfv3)

[no] area area-id-ip virtual-link routerid

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
virtual-link

Define a virtual link and its parameters
routerid

Type: ipaddr

Router ID associated with virtual link neighbor

Command Modes

  • /exec/configure/router-ospf3/vrf

area virtual-link (ospf)

[no] area area-id-ip virtual-link routerid

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
virtual-link

Define a virtual link and its parameters
routerid

Type: ipaddr

Router ID associated with virtual link neighbor

Command Modes

  • /exec/configure/router-ospf

area virtual-link (ospfv3)

[no] area area-id-ip virtual-link routerid

Syntax Description

no

Negate a command or set its defaults
area

Configure area properties
area-id-ip

Type: ipaddr

Area Id as an integer or ip address
virtual-link

Define a virtual link and its parameters
routerid

Type: ipaddr

Router ID associated with virtual link neighbor

Command Modes

  • /exec/configure/router-ospf3

arp access-list

[no] arp access-list name

Syntax Description

no

Negate a command or set its defaults
arp

ARP access-list configuration commands Not available in this release.
access-list

Configure access list
name

Type: string

length: 64

List name

Command Modes

  • /exec/configure

as-format asdot

as-format asdot | no as-format

Syntax Description

no

Negate a command or set its defaults
as-format

Configure the router's Autonomous system number (ASN) notation
asdot

Specifies the Autonomous system number (ASN) notation to asdot format

Command Modes

  • /exec/configure

as-override

[ no | default ] as-override

Syntax Description

no

Negate a command or set its defaults
default

Inherit values from a peer template
as-override

Override matching AS-number while sending update

Command Modes

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af
  • /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv4
  • /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv6

ascii-cfg-test

ascii-cfg-test

Syntax Description

ascii-cfg-test

Trigger ascii-cfg functions

Command Modes

  • /exec

attach console module

attach console module module

Syntax Description

attach

Connect to a specific linecard
console

Connect to the console
module

Connect to the module console Available only in the 9500 series.
module

Type: integer

Enter module number

Command Modes

  • /exec

attach fex

attach fex chas_no

Syntax Description

attach

Connect to module
fex

Connect to FEX
chas_no

Type: uinteger

min: 101  max: 199  

FEX number

Command Modes

  • /exec

attach module

attach module module

Syntax Description

attach

Connect to a specific linecard
module

Module number of the linecard
module

Type: integer

Enter module number

Command Modes

  • /exec

attach module node

attach module module node i0

Syntax Description

attach

Connect to a specific linecard
module

Module number of the linecard
module

Type: integer

Enter module number
node

Avanti node number on the linecard
i0

Type: integer

min: 1  max: 2  

Command Modes

  • /exec

attach module port

attach module module port i0

Syntax Description

attach

Connect to a specific linecard
module

Module number of the linecard
module

Type: integer

Enter module number
port

Port number on the linecard
i0

Type: integer

min: 1  max: 16  

Command Modes

  • /exec

attribute-name search-filter base-DN

{ userprofile | trustedCert | CRLLookup | user-switch-bind | user-certdn-match | user-pubkey-match } attribute-name s0 search-filter s1 base-DN s2

Syntax Description

userprofile

Set the userprofile
trustedCert

Set the trustedCert
CRLLookup

Set the CRLLookup
user-switch-bind

Set the user-switch-bind
user-certdn-match

Set the certificate matching
user-pubkey-match

Set the pubkey matching
attribute-name

LDAP attribute-name
s0

Type: string

length: 128

Search Map attribute-name

search-filter

LDAP search-filter
s1

Type: string

length: 128

Search Map search-filter

base-DN

LDAP base-DN
s2

Type: string

length: 128

Search Map base-DN Name

Command Modes

  • /exec/configure/ldap/search

auth-mechanism

[no] auth-mechanism plain

Syntax Description

no

Negate a command or set its defaults
auth-mechanism

Set the authentication mechanism
plain

Set the authentication mechanism as plain(default)

Command Modes

  • /exec/configure/ldap

authentication (eigrp)

[no] { ip | ipv6 } authentication { key-chain eigrp eigrp-ptag chain | mode eigrp eigrp-ptag md5 }

Syntax Description

no

Negate a command or set its defaults
ip

Configure IP features
ipv6

Configure IPv6 features
authentication

Configures EIGRP authentication subcommands
key-chain

key-chain
eigrp-ptag

Type: string

pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*

antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events

length: 20

Process tag
chain

Type: string

name of key-chain
mode

mode
eigrp

EIGRP interface configuration commands
md5

Keyed message digest

Command Modes

  • /exec/configure/if-igp

authentication (ospf)

[no] authentication [ message-digest | null ]

Syntax Description

no

Negate a command or set its defaults
authentication

Authentication on the slink
message-digest

Use message-digest authentication
null

Use null(disable) authentication

Command Modes

  • /exec/configure/router-ospf/vrf/router-ospf-slink

authentication-check level-1

[no] authentication-check level-1

Syntax Description

no

Negate a command or set its defaults
authentication-check

Check authentication on received LSP/CSNP/PSNP's
level-1

Specify authentication check for level-1 LSP, CSNP and PSNP

Command Modes

  • /exec/configure/router-isis/router-isis-vrf-common

authentication-check level-2

[no] authentication-check level-2

Syntax Description

no

Negate a command or set its defaults
authentication-check

Check authentication on received LSP/CSNP/PSNP's
level-2

Specify authentication check for level-2 LSP, CSNP and PSNP

Command Modes

  • /exec/configure/router-isis/router-isis-vrf-common

authentication (eigrp)

[no] authentication { key-chain chain | mode md5 }

Syntax Description

no

Negate a command or set its defaults
authentication

Configures EIGRP authentication subcommands
key-chain

key-chain
chain

Type: string

name of key-chain
mode

mode
md5

Keyed message digest

Command Modes

  • /exec/configure/router-eigrp/router-eigrp-vrf-common
  • /exec/configure/router-eigrp/router-eigrp-af-common

authentication (glbp)

authentication { md5 { key-chain word-chain | key-string [encrypted] word-string } | text word-text } | no authentication

Syntax Description

no

Negate a command or set its defaults
authentication

Configure authentication
md5

MD5 authentication
key-chain

MD5 Key-chain authentication
word-chain

Type: string

length: 63

MD5 authentication key-chain
key-string

MD5 keyed authentication
encrypted

Specifies an encrypted key will follow
word-string

Type: string

length: 63

MD5 authentication key
text

Plain text authentication
word-text

Type: string

length: 247

Plain text

Command Modes

  • /exec/configure/if-eth-any/glbp

authentication (hsrp_engine)

authentication { [text] secret | md5 { key-chain chain-name | key-string [ 0 | 7 ] key-name [compatibility] [ timeout sec ] } } | no authentication

Syntax Description

no

Negate a command or set its defaults
authentication

Authentication
text

Plain text authentication
secret

Type: string

length: 8

Plain text authentication string
md5

Use MD5 authentication
key-chain

Set key chain
chain-name

Type: string

length: 250

Name of key-chain
key-string

Set key string
0

Specifies an UNENCRYPTED key string will follow
7

Specifies a HIDDEN key string will follow
key-name

Type: string

length: 64

Key string (64 chars max)
compatibility

Operate in compatibility mode for MD5 type-7 authentication
timeout

Set timeout
sec

Type: integer

min: 0  max: 32767  

(0-32767)Timeout until only accepting new key (seconds)

Command Modes

  • /exec/configure/if-eth-any/hsrp_ipv4
  • /exec/configure/if-eth-any/hsrp_ipv6

authentication-key (ospf)

authentication-key key | no authentication-key [key]

Syntax Description

no

Negate a command or set its defaults
authentication-key

Configure the authentication key for the sham-link
key

Type: password

Authentication key

Command Modes

  • /exec/configure/router-ospf/vrf/router-ospf-slink

authentication-key (ospf)

authentication-key key | no authentication-key [key]

Syntax Description

no

Negate a command or set its defaults
authentication-key

Configure the authentication key for the virtual-link
key

Type: password

Authentication key

Command Modes

  • /exec/configure/router-ospf/router-ospf-vlink
  • /exec/configure/router-ospf/vrf/router-ospf-vlink

authentication (ldap_tree)

[no] authentication { bind-first [ append-with-basedn s1 ] | compare [ password-attribute s0 ] }

Syntax Description

no

Negate a command or set its defaults
authentication

Set the authentication method
bind-first

Set the authentication method to bind-first
append-with-basedn

Change the default value (cn=$userid)
s1

Type: string

length: 63

append with dn value
compare

Change the default attribute
password-attribute

Change the default password attribute (userPassword)
s0

Type: string

length: 63

password attribute

Command Modes

  • /exec/configure/ldap

authentication (ospf)

[no] authentication [ message-digest | null ]

Syntax Description

no

Negate a command or set its defaults
authentication

Authentication on the vlink
message-digest

Use message-digest authentication
null

Use null(disable) authentication

Command Modes

  • /exec/configure/router-ospf/router-ospf-vlink
  • /exec/configure/router-ospf/vrf/router-ospf-vlink

authentication-type cleartext md5

authentication-type { cleartext | md5 } level | no authentication-type [ cleartext | md5 ] level

Syntax Description

no

Negate a command or set its defaults
authentication-type

Set authentication type
cleartext

Cleartext
md5

HMAC-MD5
level

IS-IS level

level-1  value: 1
Specify authentication type for level-1 LSP, CSNP and PSNP
level-2  value: 2
Specify authentication type for level-2 LSP, CSNP and PSNP

Command Modes

  • /exec/configure/router-isis/router-isis-vrf-common

authentication challenge

[no] authentication [ neighbor nbr ] challenge

Syntax Description

'no'

Negate a command or set its defaults
authentication

Configure RSVP neighbor cryptographic authentication
neighbor

Configure RSVP neighbor
nbr

Type: ipaddr

RSVP Neighbor address
challenge

Perform challenge/response handshake with new RSVP neighbors

Command Modes

  • /exec/configure/ip-rsvp

authentication key-chain (ospf)

authentication key-chain keychain | no authentication key-chain [keychain]

Syntax Description

no

Negate a command or set its defaults
authentication

Authentication on the slink
key-chain

Authentication password key-chain
keychain

Type: string

length: 63

Key-chain name

Command Modes

  • /exec/configure/router-ospf/vrf/router-ospf-slink

authentication key-chain (isis)

authentication key-chain auth-keychain level | no authentication key-chain [auth-keychain] level

Syntax Description

no

Negate a command or set its defaults
authentication

Set authentication keychain string
key-chain

Set authentication keychain string
auth-keychain

Type: string

length: 63

authentication keychain
level

IS-IS level

level-1  value: 1
Specify authentication key for level-1 LSP, CSNP and PSNP
level-2  value: 2
Specify authentication key for level-2 LSP, CSNP and PSNP

Command Modes

  • /exec/configure/router-isis/router-isis-vrf-common

authentication key-chain (ospf)

authentication key-chain keychain | no authentication key-chain [keychain]

Syntax Description

no

Negate a command or set its defaults
authentication

Authentication on the vlink
key-chain

Authentication password key-chain
keychain

Type: string

length: 63

Key-chain name

Command Modes

  • /exec/configure/router-ospf/router-ospf-vlink
  • /exec/configure/router-ospf/vrf/router-ospf-vlink

authentication key-chain (rsvp)

authentication [ neighbor nbr ] key-chain key-chain-name | no authentication [ neighbor nbr ] key-chain

Syntax Description

'no'

Negate a command or set its defaults
authentication

Configure RSVP neighbor cryptographic authentication
neighbor

Configure RSVP neighbor
nbr

Type: ipaddr

RSVP Neighbor address
key-chain

Authentication password key-chain
key-chain-name

Type: string

Key-chain name

Command Modes

  • /exec/configure/ip-rsvp

authentication lifetime

[no] authentication [ neighbor nbr ] lifetime time

Syntax Description

'no'

Negate a command or set its defaults
authentication

Configure RSVP neighbor cryptographic authentication
neighbor

Configure RSVP neighbor
nbr

Type: ipaddr

RSVP Neighbor address
lifetime

Maximum lifetime of neighbor authentication state
time

Type: integer

min: 30  max: 86400  default: 1800

Lifetime value(in seconds)

Command Modes

  • /exec/configure/ip-rsvp

authentication text

authentication text authentication_pwd | no authentication [ text authentication_pwd ]

Syntax Description

no

Negate a command or set its defaults
authentication

Select authentication method
text

Set the authentication password (8 char max)
authentication_pwd

Type: string

length: 8

Command Modes

  • /exec/configure/if-eth-any/vrrp

authentication type

[no] authentication [ neighbor nbr ] type { md5 | sha-1 }

Syntax Description

'no'

Negate a command or set its defaults
authentication

Configure RSVP neighbor cryptographic authentication
neighbor

Configure RSVP neighbor
nbr

Type: ipaddr

RSVP Neighbor address
type

Type of authentication algorithm
md5

RSA Message Digest 5 hash algorithm (default)
sha-1

NIST Secure Hash Algorithm 1

Command Modes

  • /exec/configure/ip-rsvp

authentication window-size

[no] authentication [ neighbor nbr ] window-size value

Syntax Description

'no'

Negate a command or set its defaults
authentication

Configure RSVP neighbor cryptographic authentication
neighbor

Configure RSVP neighbor
nbr

Type: ipaddr

RSVP Neighbor address
window-size

Receive window size for authenticated messages
value

Type: integer

min: 1  max: 64  default: 1

Maximum number of messages allowed in receive window

Command Modes

  • /exec/configure/ip-rsvp

auto-cost reference-bandwidth (ospf)

auto-cost reference-bandwidth { ref-bw-mbps [Mbps] | ref-bw-gbps Gbps } | no auto-cost reference-bandwidth [ ref-bw-mbps [Mbps] | ref-bw-gbps Gbps ]

Syntax Description

no

Negate a command or set its defaults
auto-cost

Calculate OSPF cost according to bandwidth
reference-bandwidth

Reference bandwidth used to assign OSPF cost
Mbps

Specify rate in Mbps
Gbps

Specify rate in Gbps
ref-bw-mbps

Type: uinteger

min: 1  max: 4000000  default: 40000

Rate in Mbps (bandwidth) (Default)
ref-bw-gbps

Type: uinteger

min: 1  max: 4000  default: 40

Rate in Gbps (bandwidth)

Command Modes

  • /exec/configure/router-ospf
  • /exec/configure/router-ospf/vrf

auto-cost reference-bandwidth (ospfv3)

auto-cost reference-bandwidth { ref-bw-mbps [Mbps] | ref-bw-gbps Gbps } | no auto-cost reference-bandwidth [ ref-bw-mbps [Mbps] | ref-bw-gbps Gbps ]

Syntax Description

no

Negate a command or set its defaults
auto-cost

Calculate OSPFv3 cost according to bandwidth
reference-bandwidth

Reference bandwidth used to assign OSPFv3 cost
Mbps

Specify rate in Mbps
Gbps

Specify rate in Gbps
ref-bw-mbps

Type: uinteger

min: 1  max: 4000000  default: 40000

Rate in Mbps (bandwidth) (Default)
ref-bw-gbps

Type: uinteger

min: 1  max: 4000  default: 40

Rate in Gbps (bandwidth)

Command Modes

  • /exec/configure/router-ospf3
  • /exec/configure/router-ospf3/vrf

auto-recovery

auto-recovery [ reload-delay time-out ] | no auto-recovery [ reload-delay time-out ]

Syntax Description

no

Negate a command or set its defaults
auto-recovery

vPC settings to enable auto recovery if peer is presumed non-operational
reload-delay

Duration to wait before assuming peer dead and restoring vpcs
time-out

Type: integer

min: 240  max: 3600  

Time-out for restoring vPC links (in seconds)

Command Modes

  • /exec/configure/vpc-domain

autonomous-system

autonomous-system local-as | no autonomous-system [local-as]

Syntax Description

no

Negate a command or set its defaults
autonomous-system

Specify AS number for Address Family
local-as

Type: integer

min: 1  max: 65535  

Local AS number

Command Modes

  • /exec/configure/router-eigrp/router-eigrp-vrf-common
  • /exec/configure/router-eigrp/router-eigrp-af-common

awk

" | " awk expr

Syntax Description

|

Pipe command output to filter
awk

Mini AWK
expr

Type: string

Edition command (script)

Command Modes

  • /output