Cisco Nexus 9000 Series NX-OS Command Reference (Configuration Commands), Release 6.1(2)I2(2)

l2 mfwd mroute add

[no] l2 mfwd mroute add vlan_id group source source_mac

Syntax Description


no	Negate a command or set its defaults
l2	Layer2
mfwd	Multicast client
add	Add
mroute	Multicast route information
`vlan_id`	Type: vlan OTV enabled vlan
`source`	Type: ipaddr Source to add
`group`	Type: ipaddr Group to add
`source_mac`	Type: ethernet Source MAC

Command Modes

/exec/configure

l2protocol tunnel

[no] l2protocol tunnel [ cdp | dot1x | stp | vtp ]

Syntax Description


no	Negate a command or set its defaults
l2protocol	Layer 2 Protocol
tunnel	Protocol Tunneling
cdp	Enable l2pt for CDP
dot1x	Enable l2pt for DOT1X
stp	Enable l2pt for STP
vtp	Enable l2pt for VTP

Command Modes

/exec/configure/if-switching

l2protocol tunnel cos

l2protocol tunnel cos cos-value

Syntax Description


l2protocol	Layer 2 Protocol
tunnel	Protocol Tunneling
cos	CoS
`cos-value`	Type: integer min: 0 max: 7 CoS Value

Command Modes

/exec/configure

l2protocol tunnel drop-threshold

l2protocol tunnel drop-threshold [ cdp | dot1x | stp | vtp ] packets

Syntax Description


l2protocol	Layer 2 Protocol
tunnel	Protocol Tunneling
drop-threshold	Configure l2pt drop-threshold
cdp	Configure l2pt drop-threshold for CDP
dot1x	Configure l2pt drop-threshold for DOT1X
stp	Configure l2pt drop-threshold for STP
vtp	Configure l2pt drop-threshold for VTP
`packets`	Type: integer min: 1 max: 4096 Packets/sec rate beyond which protocol packets will be dropped

Command Modes

/exec/configure/if-switching

l2protocol tunnel shutdown-threshold

l2protocol tunnel shutdown-threshold [ cdp | dot1x | stp | vtp ] packets

Syntax Description


l2protocol	Layer 2 Protocol
tunnel	Protocol Tunneling
shutdown-threshold	Configure l2pt shut-threshold
cdp	Configure l2pt shut-threshold for CDP
dot1x	Configure l2pt shut-threshold for DOT1X
stp	Configure l2pt shut-threshold for STP
vtp	Configure l2pt shut-threshold for VTP
`packets`	Type: integer min: 1 max: 4096 Packets/sec rate beyond which interface is put to err-disable

Command Modes

/exec/configure/if-switching

l3vm event-history

[no] l3vm event-history { pss | errors | mts | reinit | cli | vrf | topology } size { size_in_text | size_in_Kbytes }

Syntax Description


no	Negate a command or set its defaults
l3vm	Debug L3VM information
event-history	log debug events into event history buffer
pss	L3VM pss operation
errors	L3VM errors
mts	L3VM MTS messages
reinit	L3VM reinit events
cli	Log L3VM CLI related events
vrf	Log VRF related events
topology	Log Topology related events
size	Configure the size of the event-hist buffer
`size_in_text`	Buffer size default: small small value: 65536 Small buffer medium value: 512000 Medium buffer large value: 1024000 Large buffer disabled value: 0 Disabled
`size_in_Kbytes`	Type: uinteger Size of the file in kbytes

Command Modes

/exec

label-allocation-mode per-vrf

label-allocation-mode per-vrf | no label-allocation-mode [per-vrf]

Syntax Description


no	Negate a command or set its defaults
label-allocation-mode	Configure label allocation mode Not available in this release.
per-vrf	per VRF label allocation mode

Command Modes

/exec/configure/router-bgp/router-bgp-vrf-af-ipv4
/exec/configure/router-bgp/router-bgp-vrf-af-ipv6
/exec/configure/router-bgp/router-bgp-af-ipv6

lacp fast-select-hot-standby

lacp fast-select-hot-standby | no lacp fast-select-hot-standby

Syntax Description


no	Negate a command or set its defaults
lacp	Set LACP parameters for the interface
fast-select-hot-standby	Configure fast select for hot standby ports. Enabling this feature will allow fast selection of hot standby port when last active port in the port-channel is going down.

Command Modes

/exec/configure/if-eth-port-channel-switch
/exec/configure/if-eth-port-channel
/exec/configure/if-eth-port-channel-p2p

lacp graceful-convergence

lacp graceful-convergence | no lacp graceful-convergence

Syntax Description


no	Negate a command or set its defaults
lacp	Set LACP parameters for the interface
graceful-convergence	Configure port-channel lacp graceful convergence. Disable this only with lacp ports connected to Non-Nexus peer. Disabling this with Nexus peer can lead to port suspension

Command Modes

/exec/configure/if-eth-port-channel-switch
/exec/configure/if-eth-port-channel
/exec/configure/if-eth-port-channel-p2p

lacp max-bundle

lacp max-bundle max-bundle-number | no lacp max-bundle [max-bundle-number]

Syntax Description


no	Negate a command or set its defaults
lacp	Set LACP parameters for the interface
max-bundle	Configure the port-channel max-bundle
`max-bundle-number`	Type: integer min: 1 max: 32 Enter the max-bundle number

Command Modes

/exec/configure/if-eth-port-channel-switch
/exec/configure/if-eth-port-channel
/exec/configure/if-eth-port-channel-p2p

lacp min-links

lacp min-links min-links-number | no lacp min-links [min-links-number]

Syntax Description


no	Negate a command or set its defaults
lacp	Set LACP parameters for the interface
min-links	Configure the port-channel min-links
`min-links-number`	Type: integer min: 1 max: 16 Enter the min-link number

Command Modes

/exec/configure/if-eth-port-channel-switch
/exec/configure/if-eth-port-channel
/exec/configure/if-eth-port-channel-p2p

lacp port-priority

lacp port-priority port-pri | no lacp port-priority

Syntax Description


no	Negate a command or set its defaults
lacp	Set LACP parameters for the interface
port-priority	Set LACP port priority
`port-pri`	Type: integer min: 1 max: 65535 Enter port priority

Command Modes

/exec/configure/if-eth-base
/exec/configure/if-ethernet-all

lacp rate

lacp rate rate-type | no lacp rate

Syntax Description


no	Negate a command or set its defaults
lacp	Set LACP parameters for the interface
rate	Configure rate at which PDUs are sent by LACP
`rate-type`	Rate type normal value: 0 Specifies that LACP control packets are transmitted at the normal rate, every 30 seconds after the link is bundled fast value: 1 Specifies that LACP control packets are transmitted at the fast rate, once every 1 second

Command Modes

/exec/configure/if-ethernet
/exec/configure/if-ethernet-switch
/exec/configure/if-ethernet-all
/exec/configure/if-ethernet-m
/exec/configure/if-ethernet-switch-m
/exec/configure/if-remote-ethernet
/exec/configure/if-remote-ethernet-switch

lacp suspend-individual

lacp suspend-individual | no lacp suspend-individual

Syntax Description


no	Negate a command or set its defaults
lacp	Set LACP parameters for the interface
suspend-individual	Configure lacp port-channel state. Disabling this will cause lacp to put the port to individual state and not suspend the port in case it does not get LACP BPDU from the peer ports in the port-channel

Command Modes

/exec/configure/if-eth-port-channel-switch
/exec/configure/if-eth-port-channel
/exec/configure/if-eth-port-channel-p2p

lacp system-priority

lacp system-priority sys-pri | no lacp system-priority

Syntax Description


no	Negate a command or set its defaults
lacp	Set LACP parameters for the interface
system-priority	Set LACP system priority
`sys-pri`	Type: integer min: 1 max: 65535 Enter System Priority

Command Modes

/exec/configure

last

" | " last [lines]

Syntax Description


\|	Pipe command output to filter
last	Display last lines
`lines`	Type: integer min: 0 max: 9999 number of lines to print

Command Modes

/output

layer3 peer

layer3 peer | no layer3 peer

Syntax Description


no	Negate a command or set its defaults
layer3	Enable layer 3 functionality
peer	no change for TTL of packets destined to the peer

Command Modes

/exec/configure/vpc-domain

ldap-search-map

ldap-search-map s0

Syntax Description


ldap-search-map	Set one of the configured search-map as active
`s0`	Type: string length: 128 Name of the search-map

Command Modes

/exec/configure/ldap

ldap-server deadtime

[no] ldap-server deadtime i0

Syntax Description


no	Negate a command or set its defaults
ldap-server	Configure LDAP related parameters
deadtime	Global LDAP server deadtime period in seconds
`i0`	Type: integer min: 1 max: 60 LDAP server deadtime period in minutes (default 0 mins -disabled)

Command Modes

/exec/configure

ldap-server host

[no] ldap-server host hostipname [ enable-ssl | port i1 [ timeout i2 ] | rootDN s0 [ password { 7 s1 { [ port1 i3 [ timeout1 i4 ] ] | [ timeout5 i9 ] } | s2 { [ port2 i5 [ timeout2 i6 ] ] | [ timeout4 i8 ] } } ] | timeout3 i7 ]

Syntax Description


no	Negate a command or set its defaults
ldap-server	Configure LDAP related parameters
host	LDAP server's DNS name or IP address
`hostipname`	Type: nameorip IPV4/IPV6 address or DNS name
enable-ssl	LDAP server enable ssl
port	LDAP server's port (default: global config)
`i1`	Type: integer min: 1 max: 65535 port number
timeout	LDAP server timeout period in seconds
`i2`	Type: integer min: 1 max: 60 LDAP server timeout in seconds (default: global config)
rootDN	LDAP server root DN
`s0`	Type: string length: 128 root DN
password	LDAP server root password
7	LDAP root password (encrypted)
`s1`	Type: string length: 64 password (encrypted)
port1	LDAP server's port (default: global config)
`i3`	Type: integer min: 1 max: 65535 port number
timeout1	LDAP server timeout period in seconds
`i4`	Type: integer min: 1 max: 60 LDAP server timeout in seconds (default: global config)
`s2`	Type: string length: 64 password (clear text)
port2	LDAP server's port (default: global config)
`i5`	Type: integer min: 1 max: 65535 port number
timeout2	LDAP server timeout period in seconds
`i6`	Type: integer min: 1 max: 60 LDAP server timeout in seconds (default: global config)
timeout3	LDAP server timeout period in seconds
`i7`	Type: integer min: 1 max: 60 LDAP server timeout in seconds (default: global config)
timeout4	LDAP server timeout period in seconds
`i8`	Type: integer min: 1 max: 60 LDAP server timeout in seconds (default: global config)
timeout5	LDAP server timeout period in seconds
`i9`	Type: integer min: 1 max: 60 LDAP server timeout in seconds (default: global config)

Command Modes

/exec/configure

ldap-server port

[no] ldap-server port i0

Syntax Description


no	Negate a command or set its defaults
ldap-server	Configure LDAP related parameters
port	Global LDAP server's port (default 389)
`i0`	Type: integer min: 1 max: 65535 port number

Command Modes

/exec/configure

ldap-server timeout

[no] ldap-server timeout i0

Syntax Description


no	Negate a command or set its defaults
ldap-server	Configure LDAP related parameters
timeout	Global LDAP server timeout period in seconds
`i0`	Type: integer min: 1 max: 60 LDAP server timeout period in seconds (default 5 sec)

Command Modes

/exec/configure

ldap search-map

[no] ldap search-map s0

Syntax Description


no	Negate a command or set its defaults
ldap	Configure information about ldap
search-map	Configure the search-map
`s0`	Type: string length: 128 Search Map Name

Command Modes

/exec/configure

less

" | " less [ -d | -E ] +

Syntax Description


\|	Pipe command output to filter
less	Filter for paging
-d	dumb terminal
-E	quit at end of file

Command Modes

/output

license expiry check_interval

license expiry check_interval i0

Syntax Description


license	Enter the license configuration mode
expiry	Configure the expiry check interval
check_interval	Configure the expiry check interval
`i0`	Type: integer min: 5 max: 86400 Specify the license expiry check interval in seconds

Command Modes

/exec

license grace-period

[no] license grace-period

Syntax Description


no	Negate a command or set its defaults
license	Modify license features
grace-period	Configure grace period support for licenses

Command Modes

/exec/configure

license grace-period days

license grace-period days i0

Syntax Description


license	Enter the license configuration mode
grace-period	Configure the grace period
days	Congigure the grace period in days
`i0`	Type: integer min: 0 max: 120 Number of days

Command Modes

/exec

license grace-period seconds

license grace-period seconds i0

Syntax Description


license	Enter license configuration mode
grace-period	Configure the grace period
seconds	Configure the grace period in seconds
`i0`	Type: integer min: 0 max: 10368000 Specify the grace period in seconds

Command Modes

/exec

license grace period

license grace period i0

Syntax Description


license	Enter the license configuration mode
grace	Configure the grace period
period	Specify the grace period in days
`i0`	Type: integer min: 0 max: 120

Command Modes

/exec

license reserve count package module

[no] license reserve count i0 package license-feature module i1

Syntax Description


no	Negate a command or set its defaults
license	Display licensing information
reserve	Reserve the licenses for the specified module
count	Count of licenses to reserve
`i0`	Type: integer Count of licenses
package	Name of the license package to reserve
`license-feature`	Type: string Name of the license package
module	Module number
`i1`	Type: integer Module number

Command Modes

/exec/configure

limit-resource m4route-mem minimum

limit-resource m4route-mem [ minimum { min | min-hi } ] maximum { max-lo | max | max-hi | equal-to-min } | no limit-resource m4route-mem [ [ minimum { min | min-hi } ] maximum { max-lo | max | max-hi | equal-to-min } ]

Syntax Description


no	Negate a command or set its defaults
limit-resource	Resource configuration
m4route-mem	set ipv4 route memory limits
minimum	minimum route memory to allocate
`min`	Type: integer min: 3 max: 90 minimum route memory value
`min-hi`	Type: integer min: 91 max: 2147483647 minimum route memory value
maximum	maximum route memory to allocate
`max-lo`	Type: integer min: 1 max: 89 maximum route memory value
`max`	Type: integer min: 3 max: 90 maximum route memory value
`max-hi`	Type: integer min: 91 max: 2147483647 maximum route memory value
equal-to-min	maximum value equal to min

Command Modes

/exec/configure/vdc-template
/exec/configure/vdc

limit-resource m6route-mem minimum

limit-resource m6route-mem [ minimum { min | min-hi } ] maximum { max-lo | max | max-hi } | no limit-resource m6route-mem [ [ minimum { min | min-hi } ] maximum { max-lo | max | max-hi } ]

Syntax Description


no	Negate a command or set its defaults
limit-resource	Resource configuration
m6route-mem	set ipv6 route memory limits
minimum	minimum route memory to allocate
`min`	Type: integer min: 3 max: 20 minimum route memory value
`min-hi`	Type: integer min: 21 max: 2147483647 minimum route memory value
maximum	maximum route memory to allocate
`max-lo`	Type: integer min: 1 max: 19 maximum route memory value
`max`	Type: integer min: 3 max: 20 maximum route memory value
`max-hi`	Type: integer min: 21 max: 2147483647 maximum route memory value

Command Modes

/exec/configure/vdc-template
/exec/configure/vdc

limit-resource module-type

limit-resource module-type card-type+ | no limit-resource module-type

Syntax Description


no	Negate a command or set its defaults
limit-resource	Resource configuration
module-type	Controls which type of modules are allowed in this vdc Not available in this release.
`card-type`	Allowed module types m1 value: 0 Enable m1 type modules in this vdc f1 value: 1 Enable f1 type modules in this vdc m1xl value: 2 Enable m1xl type modules in this vdc f2 value: 3 Enable f2 type modules in this vdc m2xl value: 4 Enable m2 type modules in this vdc

Command Modes

/exec/configure/vdc

limit-resource port-channel minimum maximum

limit-resource port-channel minimum min-val maximum { max-val | equal-to-min } | no limit-resource port-channel [ minimum min-val maximum { max-val | equal-to-min } ]

Syntax Description


no	Negate a command or set its defaults
limit-resource	Resource configuration
port-channel	set port-channel limits
minimum	minimum port-channels to allocate
`min-val`	Type: integer min: 0 max: 768 minimum port-channel value
maximum	maximum port-channels to allocate
`max-val`	Type: integer min: 0 max: 768 maximum port-channel value
equal-to-min	set maximum value equal to min

Command Modes

/exec/configure/vdc-template
/exec/configure/vdc

limit-resource u4route-mem minimum

limit-resource u4route-mem [ minimum { min-lo | min | min-hi } ] maximum { max-lo | max | max-hi | equal-to-min } | no limit-resource u4route-mem [ [ minimum { min-lo | min | min-hi } ] maximum { max-lo | max | max-hi | equal-to-min } ]

Syntax Description


no	Negate a command or set its defaults
limit-resource	Resource configuration
u4route-mem	set ipv4 route memory limits
minimum	minimum route memory to allocate
`min-lo`	Type: integer min: 1 max: 512 minimum route memory value
`min`	Type: integer min: 1 max: 512 minimum route memory value
`min-hi`	Type: integer min: 513 max: 2147483647 minimum route memory value
maximum	maximum route memory to allocate
`max-lo`	Type: integer min: 1 max: 511 maximum route memory value
`max`	Type: integer min: 1 max: 512 maximum route memory value
`max-hi`	Type: integer min: 513 max: 2147483647 maximum route memory value
equal-to-min	maximum value equal to min

Command Modes

/exec/configure/vdc-template
/exec/configure/vdc

limit-resource u6route-mem minimum

limit-resource u6route-mem [ minimum { min-lo | min | min-hi } ] maximum { max-lo | max | max-hi | equal-to-min } | no limit-resource u6route-mem [ [ minimum { min-lo | min | min-hi } ] maximum { max-lo | max | max-hi | equal-to-min } ]

Syntax Description


no	Negate a command or set its defaults
limit-resource	Resource configuration
u6route-mem	set ipv6 route memory limits
minimum	minimum route memory to allocate
`min-lo`	Type: integer min: 1 max: 200 minimum route memory value
`min`	Type: integer min: 1 max: 200 minimum route memory value
`min`	Type: integer min: 1 max: 200 minimum route memory value
`min-hi`	Type: integer min: 201 max: 2147483647 minimum route memory value
maximum	maximum route memory to allocate
`max-lo`	Type: integer min: 1 max: 199 maximum route memory value
`max`	Type: integer min: 1 max: 200 maximum route memory value
`max-hi`	Type: integer min: 201 max: 2147483647 maximum route memory value
equal-to-min	maximum value equal to min

Command Modes

/exec/configure/vdc-template
/exec/configure/vdc

limit-resource vlan minimum

limit-resource vlan minimum min-val maximum { max-val | equal-to-min } | no limit-resource vlan [ minimum min-val maximum { max-val | equal-to-min } ]

Syntax Description


no	Negate a command or set its defaults
limit-resource	Resource configuration
vlan	set VLAN limits
minimum	minimum VLANs to allocate
`min-val`	Type: integer min: 16 max: 4094 minimum VLANs value
maximum	maximum VLANs to allocate
`max-val`	Type: integer min: 16 max: 4094 maximum VLANs value
equal-to-min	set maximum value equal to min

Command Modes

/exec/configure/vdc-template
/exec/configure/vdc

limit-resource vrf minimum

limit-resource vrf minimum number1 maximum { number2 | equal-to-min } | no limit-resource vrf [ minimum number1 maximum { number2 | equal-to-min } ]

Syntax Description


no	Negate a command or set its defaults
limit-resource	Resource configuration
vrf	set vrf resource limits
minimum	minimum vrf resources to allocate
`number1`	Type: integer min: 2 max: 4096 minimum vrf resource value
maximum	maximum vrf resources to allocate
`number2`	Type: integer min: 2 max: 4096 maximum vrf resource value
equal-to-min	set maximum value equal to min

Command Modes

/exec/configure/vdc-template
/exec/configure/vdc

line console (syscli)

[no] line console

Syntax Description


no	Negate a command or set its defaults
line	Configure a terminal line
console	Primary terminal line

Command Modes

/exec/configure

line console (vsh)

[no] line console

Syntax Description


no	Negate a command or set its defaults
line	Configure a terminal line
console	Primary terminal line

Command Modes

/exec/configure

line vty

Syntax Description


line	Configure a terminal line
vty	Virtual terminal line

Command Modes

/exec/configure

link debounce

link debounce [ time time_val ] | no link debounce [ time time_val ]

Syntax Description


no	Negate a command or set its defaults
link	Configure link
debounce	Configure link debounce timer
time	Link debounce time
`time_val`	Type: integer min: 0 max: 5000 Timer value (in milliseconds)

Command Modes

/exec/configure/if-ethernet-all
/exec/configure/if-eth-base
/exec/configure/if-sub

listobject-boolean not

listobject-boolean object-id not

Syntax Description


listobject-boolean	Configure Object as member of tracking list
`object-id`	Type: integer min: 1 max: 500 Tracked object
not	Negate Up status

Command Modes

/exec/configure/tr-list-bool

listobject

[no] listobject object-id

Syntax Description


no	Negate a command or set its defaults
listobject	Configure Object as member of tracking list
`object-id`	Type: integer min: 1 max: 500 Tracked Object

Command Modes

/exec/configure/tr-list-thrw
/exec/configure/tr-list-thrp
/exec/configure/tr-list-bool

listobject-weightthreshold-weight

listobject-weight object-id weight weight-val | threshold-weight weight-thresh { weightup up-weight [ weightdown down-weight ] | weightdown down-weight [ weightup up-weight ] } | no threshold-weight weight-thresh

Syntax Description


no	Negate a command or set its defaults
listobject-weight	Configure Object as member of tracking list
`object-id`	Type: integer min: 1 max: 500 Tracked Object
weight	Assign a weight to object
`weight-val`	Type: integer min: 1 max: 255 Assign a weight to object
threshold-weight	Threshold parameters
weight-thresh	Weight threshold
weightup	Up threshold
`up-weight`	Type: integer min: 0 max: 255 Up threshold weight
weightdown	Down threshold
`down-weight`	Type: integer min: 0 max: 255 Down threshold weight

Command Modes

/exec/configure/tr-list-thrw

lldp (lldp)

[no] lldp { receive | transmit }

Syntax Description


no	Negate a command or set its defaults
lldp	Configure Interface LLDP parameters
receive	Enable LLDP reception on interface
transmit	Enable LLDP transmission on interface

Command Modes

/exec/configure/if-ethernet-all
/exec/configure/if-gig-ether-all
/exec/configure/if-gig-ether
/exec/configure/if-eth-base
/exec/configure/if-mgmt-ether

lldp (lldp)

[no] lldp { holdtime i0 | reinit i1 | timer i2 | portid-subtype i3 | tlv-select { management-address | port-description | port-vlan | system-capabilities | system-description | system-name | dcbxp } }

Syntax Description


no	Negate a command or set its defaults
lldp	Configure global LLDP parameters
holdtime	Specify the holdtime (in sec) to be sent in packets
`i0`	Type: integer min: 10 max: 255 holdtime in sec
reinit	Delay (in sec) for LLDP initialisation on any interface
`i1`	Type: integer min: 1 max: 10 reinit in sec
timer	Specify the rate at which LLDP packets are sent (in sec)
`i2`	Type: integer min: 5 max: 254 rate of packets in sec
portid-subtype	config portid subtype for LLDP TLV and SNMP MIBs
`i3`	Type: uinteger min: 0 max: 1 0: long interface name (default), 1: short interface name
tlv-select	Selection of LLDP to send
management-address	Management Address TLV
port-description	Port Description TLV
port-vlan	Port Vlan ID TLV
system-capabilities	System Capabilities TLV
system-description	System Description TLV
system-name	System Name TLV
dcbxp	DCBXP TLVs

Command Modes

/exec/configure

lldp eee

[no] lldp eee { rx_wake_time i0 | tx_wake_time i1 }

Syntax Description


no	Negate a command or set its defaults
lldp	Configure LLDP parameters
eee	Configure LLDP EEE parameters
rx_wake_time	Specify the EEE rx wake time
`i0`	Type: integer min: 1 max: 32 EEE rx wake time
tx_wake_time	Specify the EEE tx wake time
`i1`	Type: integer min: 1 max: 32 EEE tx wake time

Command Modes

/exec/configure/if-ethernet-all
/exec/configure/if-gig-ether-all
/exec/configure/if-gig-ether
/exec/configure/if-eth-base
/exec/configure/if-mgmt-ether

lldp tlv-select eee

[no] lldp tlv-select eee

Syntax Description


no	Negate a command or set its defaults
lldp	Configure Interface LLDP parameters
tlv-select	Configure EEE parameter
eee	Enable/Disable LLDP EEE TLV

Command Modes

/exec/configure/if-ethernet-all
/exec/configure/if-gig-ether-all
/exec/configure/if-gig-ether
/exec/configure/if-eth-base
/exec/configure/if-mgmt-ether

load-balancing

load-balancing load-bal | no load-balancing [load-bal]

Syntax Description


no	Negate a command or set its defaults
load-balancing	Load balancing method
`load-bal`	Load balancing method host-dependent value: 3 Load balance equally, source MAC determines forwarder choice round-robin value: 1 Load balance equally using each forwarder in turn weighted value: 2 Load balance in proportion to forwarder weighting

Command Modes

/exec/configure/if-eth-any/glbp

load (conditional_core)

load uri0 [s0]

Syntax Description


load	Load system image
`uri0`	Type: uri Enter image URI
`s0`	Type: string Options

Command Modes

/exec

load-interval (if_manager)

load-interval [ counter counter_val ] interval | no load-interval [ counter counter_val ] [interval1]

Syntax Description


no	Negate a command or set its defaults
load-interval	Specify interval for load calculation for an interface
counter	Specify counter for this load interval
`counter_val`	Type: uinteger min: 1 max: 3 Specify counter for this load interval
`interval`	Type: uinteger min: 30 max: 300 Load interval delay in seconds
`interval1`	Type: uinteger min: 30 max: 300 Load interval delay in seconds

Command Modes

/exec/configure/if-ethernet-all
/exec/configure/if-eth-non-member
/exec/configure/if-port-channel

load-interval (oim)

load-interval interval | no load-interval

Syntax Description


no	Negate a command or set its defaults
load-interval	Specify interval for load calculation for an interface
`interval`	Type: uinteger min: 120 max: 300 Load interval delay in seconds

Command Modes

/exec/configure/if-te

load-interval (svi)

load-interval [ counter counter_val ] interval | no load-interval [ counter counter_val ] [interval1]

Syntax Description


no	Negate a command or set its defaults
load-interval	Specify interval for load calculation for an interface
counter	Specify counter for this load interval
`interval`	Type: uinteger min: 60 max: 600 Load interval delay in seconds
`counter_val`	Type: uinteger min: 1 max: 3 Specify counter for this load interval
`interval1`	Type: uinteger min: 60 max: 600 Load interval delay in seconds

Command Modes

/exec/configure/if-vlan-common

load (load)

load uri0 [s0]

Syntax Description


load	Load system image
`uri0`	Type: uri Enter image URI
`s0`	Type: string Options

Command Modes

/exec

local-as

local-as asn | no local-as [asn]

Syntax Description


no	Negate a command or set its defaults
local-as	Specify the local-as for this vrf
`asn`	Type: asn AS number

Command Modes

/exec/configure/router-bgp/router-bgp-vrf

locator-led

[no] locator-led { chassis | module module | fan fan_num }

Syntax Description


no	Negate a command or set its defaults
locator-led	blink locator led on device
chassis	blink chassis led
module	blink module led
`module`	Type: integer please enter the module number
fan	blink Fan led
`fan_num`	Type: uinteger min: 1 max: 12 fan number

Command Modes

/exec

locator-led fex

[no] locator-led fex chas_no

Syntax Description


no	Negate the command
locator-led	Turn on locator beacon
fex	Blink FEX ID
`chas_no`	Type: uinteger min: 100 max: 199 FEX number

Command Modes

/exec

log-adjacency-changes (isis)

[no] log-adjacency-changes

Syntax Description


no	Negate a command or set its defaults
log-adjacency-changes	Log changes in adjacency state

Command Modes

/exec/configure/router-isis/router-isis-vrf-common

log-adjacency-changes (ospf)

[no] log-adjacency-changes [detail]

Syntax Description


no	Negate a command or set its defaults
log-adjacency-changes	Log changes in adjacency state
detail	Notify all state changes

Command Modes

/exec/configure/router-ospf
/exec/configure/router-ospf/vrf

log-adjacency-changes (ospfv3)

[no] log-adjacency-changes [detail]

Syntax Description


no	Negate a command or set its defaults
log-adjacency-changes	Log changes in adjacency state
detail	Notify all state changes

Command Modes

/exec/configure/router-ospf3
/exec/configure/router-ospf3/vrf

log-event-type

[no] [eigrp] log-event-type [dual] [xmit] [transport]

Syntax Description


no	Negate a command or set its defaults
eigrp	EIGRP router configuration commands
log-event-type	Set event types logged
dual	Log DUAL events
xmit	Log transmission events
transport	Log transport events

Command Modes

/exec/configure/router-eigrp/router-eigrp-vrf-common
/exec/configure/router-eigrp/router-eigrp-af-common

log-neighbor-changes

[no] log-neighbor-changes

Syntax Description


no	Negate a command or set its defaults
log-neighbor-changes	Log a message for neighbor up/down event

Command Modes

/exec/configure/router-bgp/vrf-cmds

logging clear_console

Syntax Description


logging	Exec logging commands
clear_console	Clear Console

Command Modes

/exec

logging console

[no] logging console [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
console	Set console logging
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging drop thresholdlogging drop threshold

logging drop threshold threshold-in-packets [ level level-value ] | [no] logging drop threshold [ threshold-in-packets [ level level-value ] ]

Syntax Description


no	Negate a command or set its defaults
logging	set logging for copp class
drop	logging for dropped packets
threshold	threshold value for dropped packets
`threshold-in-packets`	Type: long dropped packet count
level	syslog level
`level-value`	Type: integer-range specify the logging level between 1-7

Command Modes

/exec/configure/pmap/class

logging event

[no] logging event { link-status | trunk-status } { enable | default }

Syntax Description


no	Negate a command or set its defaults
logging	Configure logging for interface
event	Interface events
link-status	UPDOWN and CHANGE messages
trunk-status	TRUNK status messages
enable	To enable logging overriding port level configuration
default	default logging configuration used by interfaces not explicitly configured

Command Modes

/exec/configure

logging event port link-status

logging event port link-status [default] | no logging event port link-status

Syntax Description


no	Negate a command or set its defaults
logging	Configure logging for interface
event	Interface events
port	Port level events
link-status	UPDOWN and CHANGE messages
default	Use the global default value

Command Modes

/exec/configure/if-ethernet-all
/exec/configure/if-eth-base
/exec/configure/if-port-channel
/exec/configure/if-ether-sub
/exec/configure/if-port-channel-sub
/exec/configure/if-gig-ether-sub
/exec/configure/if-loopback
/exec/configure/if-remote-ethernet-sub
/exec/configure/if-ether-sub-p2p

logging event port trunk-status

logging event port trunk-status [default] | no logging event port trunk-status

Syntax Description


no	Negate a command or set its defaults
logging	Configure logging for interface
event	Interface events
port	Port level events
trunk-status	TRUNK status messages
default	Use the global default value

Command Modes

/exec/configure/if-ethernet-all
/exec/configure/if-eth-base
/exec/configure/if-port-channel

logging flush

Syntax Description


logging	Exec logging commands
flush	Flushing logging

Command Modes

/exec

logging invalid-username

[no] logging invalid-username

Syntax Description


no	Negate a command or set its defaults
logging	One Platform logging
invalid-username	Display invalid usernames in ONE-P log messages

Command Modes

/exec/configure/onep

logging ip access-list cache

[no] logging ip access-list cache { entries num_entries | interval seconds | threshold num_packets }

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
ip	IP configuration
access-list	Access-list
cache	logging
entries	Maximum number of log entries cached in software
`num_entries`	Type: uinteger min: 0 max: 1048576 default: 8000 Number of entries
interval	Log-update interval (in sec)
`seconds`	Type: uinteger min: 5 max: 86400 default: 300 Log-update interval in seconds
threshold	Log-update threshold
`num_packets`	Type: uinteger min: 0 max: 1000000 default: 0 Log-update threshold (number of hits)

Command Modes

/exec/configure

logging ip access-list include sgt

[no] logging ip access-list include sgt

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
ip	IP configuration
access-list	Access-list
include	Include additional fields in syslogs
sgt	Include source group tag info in syslogs

Command Modes

/exec/configure

logging level (certen_tree)

[no] logging level { cert-enroll i0 | cert_enroll i1 }

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
cert-enroll	Cert-enroll syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
cert_enroll	Cert-enroll syslog level
`i1`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (diag_port_lb)

[no] logging level { port_lb i0 | diag_port_lb i0 }

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
port_lb	Set level for Diagnostic Port Loopback Test syslog messages
diag_port_lb	Set level for Diagnostic Port Loopback Test syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (eth_dstats)

[no] logging level { ethdstats i0 | eth_dstats i0 }

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ethdstats	delta statistics syslog level
eth_dstats	delta statistics syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (eth_pcm_dc3)

[no] logging level { port-channel loglevel | port_channel loglevel | eth_port_channel loglevel }

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
port-channel	Set level for port-channel syslog messages
port_channel	Set level for port-channel syslog messages
eth_port_channel	Set level for port-channel syslog messages
`loglevel`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (icmpv6)

[no] logging level { ipv6 icmp | icmpv6 } level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ipv6	Configure IPv6 features
icmp	ICMPv6 Commands
icmpv6	ICMPv6 Commands
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (ifmgr)

[no] logging level { im i0 | ifmgr i0 }

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
im	Set level for im syslog messages
ifmgr	Set level for im syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (licmgr)

logging level { license | licmgr } i0 | no logging level { license | licmgr } [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
license	Licensing syslog level
licmgr	Licensing syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (mcastfwd)

[no] logging level { mfwd | mcastfwd } level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
mfwd	Configures Global IP Multicast Forwarding
mcastfwd	Configures Global IP Multicast Forwarding
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (mrib)

[no] logging level { routing [ ip | ipv4 ] multicast | mrib } level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
routing	Configure routing information
ip	Configure IP features
ipv4	Configure IP features
multicast	Set syslog filter level for MRIB
mrib	Set syslog filter level for MRIB
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (nfcli)

[no] logging level { xml server | xmlma } i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
xml	xml agent
server	xml agent server
xmlma	xml master agent. Same as combination of keywords xml server
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (qosmgr)

[no] logging level { ipqos | IPQOSMGR } i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ipqos	Set level for ipqosmgr syslog messages
IPQOSMGR	Set level for ipqosmgr syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (security_tree)

logging level { security | securityd } i0 | no logging level { security | securityd } [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
security	Security syslog level
securityd	Security syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (sksd)

logging level { keystore | sksd } i0 | no logging level { keystore | sksd } [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
keystore	Keystore syslog level
sksd	Keystore/sksd syslog level
`i0`	Type: integer min: 0 max: 7

Command Modes

/exec/configure

logging level (stp)

[no] logging level spanning-tree i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
spanning-tree	Set level for stp syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level (vrrp_mgr)

[no] logging level { vrrp-cfg cfg_level_num | vrrp-eng eng_level_num }

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
vrrp-cfg	Set level for vrrp configuration
`cfg_level_num`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
vrrp-eng	Set level for vrrp engine
`eng_level_num`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level aaa

logging level aaa i0 | no logging level aaa [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
aaa	Set level for aaa syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level acllog

logging level acllog i0 | no logging level acllog [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
acllog	Set level for acllog syslog messages
`i0`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level aclmgr

[no] logging level aclmgr i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
aclmgr	Set level for aclmgr syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level adjmgr

[no] logging level adjmgr level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
adjmgr	Set syslog filter level for Adjacency Manager
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level all

logging level { all i0 | auth i1 | authpriv i2 | cron i3 | daemon i4 | ftp i5 | kernel i6 | local0 i7 | local1 i8 | local2 i9 | local3 i10 | local4 i11 | local5 i12 | local6 i13 | local7 i14 | lpr i15 | mail i16 | news i17 | syslog i18 | user i19 | uucp i20 } | no logging level { all [i0] | auth [i1] | authpriv [i2] | cron [i3] | daemon [i4] | ftp [i5] | kernel [i6] | local0 [i7] | local1 [i8] | local2 [i9] | local3 [i10] | local4 [i11] | local5 [i12] | local6 [i13] | local7 [i14] | lpr [i15] | mail [i16] | news [i17] | syslog [i18] | uucp [i20] }

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
all	Set level for all facilities
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
auth	Set level for Authorization System
`i1`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
authpriv	Set level for Authorization (Private) system
`i2`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
cron	Set level for Cron/at facility
`i3`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
daemon	Set level for System daemons
`i4`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
ftp	Set level for File Transfer System
`i5`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
kernel	Set level for kernel
`i6`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
local0	Set level for Local use daemons
`i7`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
local1	Set level for Local use daemons
`i8`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
local2	Set level for Local use daemons
`i9`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
local3	Set level for Local use daemons
`i10`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
local4	Set level for Local use daemons
`i11`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
local5	Set level for Local use daemons
`i12`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
local6	Set level for Local use daemons
`i13`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
local7	Set level for Local use daemons
`i14`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
lpr	Set level for Line Printer System
`i15`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
mail	Set level for Mail system
`i16`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
news	Set level for USENET news
`i17`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
syslog	Set level for Internal Syslog Messages
`i18`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
user	Set level for User Process
`i19`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
uucp	Set level for Unix-to-Unix copy system
`i20`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level arp

[no] logging level arp level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
arp	Set syslog filter level for ARP
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ascii-cfg

[no] logging level ascii-cfg i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ascii-cfg	Set logging level for ascii-cfg
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level bfd

[no] logging level bfd i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
bfd	Set level for bfd syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level bgp

[no] logging level bgp level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
bgp	Set syslog filter level for BGP
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level bloggerd

[no] logging level bloggerd i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
bloggerd	Set level for BloggerD syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level bootvar

[no] logging level bootvar i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
bootvar	Set level for bootvar
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level callhome

logging level callhome i0 | no logging level callhome [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
callhome	Callhome syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level capability

[no] logging level capability i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
capability	Set syslog level for mig utils daemon
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level cdp

logging level cdp i0 | no logging level cdp [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
cdp	Set level for CDP syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level cfs

[no] logging level cfs i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
cfs	Set logging level for CFS
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level clis

[no] logging level clis level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
clis	Set syslog filter level for CLIS
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level clk_mgr

[no] logging level clk_mgr i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
clk_mgr	Set level for clock manager syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level confcheck

logging level confcheck i0 | no logging level confcheck [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
confcheck	ConfCheck syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level copp

logging level copp i0 | no logging level copp [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
copp	Set level for copp syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level core

logging level core i0 | no logging level core [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
core	core daemon syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level device_test

[no] logging level device_test i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
device_test	Set level for GOLD Device Test syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level dhcp_snoop

logging level dhcp_snoop level | no logging level dhcp_snoop [level]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
dhcp_snoop	Set level for dhcp snoop syslog messages
`level`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level diagclient

[no] logging level diagclient i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
diagclient	Set level for GOLD DiagClient syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level diagmgr

[no] logging level diagmgr i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
diagmgr	Set level for GOLD DiagMgr syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level eigrp

[no] logging level eigrp [eigrp-ptag] level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
eigrp	Set syslog filter level for EIGRP
`eigrp-ptag`	Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting \| all \| fsm \| graceful-restart \| interface \| interfaces \| internal \| neighbor \| neighbors \| notifications \| packets \| prefix \| route \| route-map \| shutdown \| summary \| topology \| traffic \| transmit \| urib \| vrf \| vrf-events length: 20 Process tag
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level eltm

logging level eltm i0 | no logging level eltm

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
eltm	Set level for eltm syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ethpm (ethpm)

[no] logging level ethpm i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ethpm	Set level for ethpm syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ethpm (if_manager)

[no] logging level ethpm { link-up | link-down } level

Syntax Description


no	Negate a command or set its defaults
system	System management commands
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ethpm	Set level for ethpm syslog messages
link-up	Configure logging level for link up syslog messages
link-down	Configure logging level for link down syslog messages
`level`	Type: _enum Logging Level

Command Modes

/exec/configure

logging level evmc

[no] logging level evmc i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
evmc	Set level for evmc syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level evmed

[no] logging level evmed i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
evmed	Set level for evmed syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level evms

[no] logging level evms i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
evms	Set level for evms syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level feature-mgr

logging level feature-mgr i0 | no logging level feature-mgr [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
feature-mgr	Set feature manager syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level fex

[no] logging level fex i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
fex	Set level for FEX syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level fs-daemon

logging level fs-daemon i0 | no logging level fs-daemon [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
fs-daemon	fs daemon syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level glbp

[no] logging level glbp i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
glbp	Set level for glbp syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level gpixm

[no] logging level gpixm i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
gpixm	Set level for global-pixm syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level hsrp

[no] logging level hsrp i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
hsrp	Set level for hsrp syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level igmp

[no] logging level [ip] igmp level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ip	Configure IP features
igmp	IGMP global configuration commands
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level interface-vlan

[no] logging level interface-vlan i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
interface-vlan	Set level for interface vlan syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ip msdp

[no] logging level ip msdp level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ip	Configure IP features
msdp	Set syslog filter level for MSDP
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ip pim

[no] logging level ip pim level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ip	Configure IP features
pim	Set syslog filter level for PIM
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ipconf

[no] logging level ipconf { ipv6 i0 | i1 }

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ipconf	Set level for ipconf syslog messages
ipv6	Set level for ipconf syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
`i1`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ipv6 pim

[no] logging level ipv6 pim level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ipv6	Configure IPv6 features
pim	Set syslog filter level for PIM6
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level isis

[no] logging level isis level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
isis	Set syslog filter level for IS-IS
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level l2fm

logging level l2fm i0 | no logging level l2fm

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
l2fm	Set level for l2fm syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level l2pt

[no] logging level l2pt log-level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
l2pt	Set level for l2pt syslog messages
`log-level`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level l3vm

[no] logging level l3vm level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
l3vm	Set syslog filter level for L3VM
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level lacp

[no] logging level lacp i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
lacp	Set level for lacp syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ldap

logging level ldap i0 | no logging level ldap [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ldap	Set level for ldap syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level lldp

[no] logging level lldp i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
lldp	Set level for lldp syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level m2rib

[no] logging level m2rib i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
m2rib	Set level for m2rib syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level mfdm

logging level mfdm i0 | no logging level mfdm

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
mfdm	Set level for mfdm syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level module

[no] logging level module i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
module	Set level for module(linecard) manager syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level monitor

[no] logging level monitor i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
monitor	Set level for ethernet span syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level mpls switching

[no] logging level mpls switching level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
mpls	Set level for MPLS syslog messages
switching	Set level for mpls switching syslog messages
`level`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level mvsh

[no] logging level mvsh i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
mvsh	Set level for mvsh syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level netstack

[no] logging level netstack level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
netstack	Set syslog filter level for Netstack
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ntp

[no] logging level ntp i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ntp	Set syslog filter level for NTP
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level nve

[no] logging level nve inp

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
nve	Display NVE information
`inp`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level oim

[no] logging level oim i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
oim	Display OIM information
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level onep

[no] logging level onep 0-7

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
onep	One Platform
`0-7`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level orib

[no] logging level orib level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
orib	Set syslog filter level for ORIB
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ospf

[no] logging level ospf level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ospf	Set syslog filter level for OSPF
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ospfv3

[no] logging level ospfv3 level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ospfv3	Set syslog filter level for OSPFv3
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level otm

logging level otm i0

Syntax Description


logging	Modify message logging facilities
level	Facility parameter for syslog messages
otm	Set level for otm syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level patch-installer

[no] logging level patch-installer i0

Syntax Description


no	Negate a command or set its defaults
logging	Set level for patch-installer
level	Facility parameter for syslog messages
patch-installer	Set level for patch-installer syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level pfstat

logging level pfstat i0 | no logging level pfstat

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
pfstat	Set level for pfstat syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level pixm

[no] logging level pixm i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
pixm	Set level for vdc-local-pixm syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level platform

[no] logging level platform i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
platform	platform manager syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level pltfm_config

[no] logging level pltfm_config i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
pltfm_config	Set level for pltfm_config syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level plugin

logging level plugin i0 | no logging level plugin [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
plugin	Set level for plugin syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level poap

[no] logging level poap i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
poap	Set level for poap syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level pong

[no] logging level pong i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
pong	Set level for Pong syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level port-security

logging level port-security i0 | no logging level port-security [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
port-security	Set level for port-security syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level port_client

[no] logging level port_client i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
port_client	Set level for port_client syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level private-vlan

[no] logging level private-vlan i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
private-vlan	Set level for private VLAN syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level radius

logging level radius i0 | no logging level radius [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
radius	RADIUS syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level res_mgr

[no] logging level res_mgr i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
res_mgr	Set level for res_mgr syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level rip

[no] logging level rip level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
rip	Set syslog filter level for RIP
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level rpm

[no] logging level rpm level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
rpm	Set syslog filter level for RPM
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level rsvp

[no] logging level rsvp i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
rsvp	Set level for RSVP syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level sal

[no] logging level sal i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
sal	Set level for sal syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level scheduler

[no] logging level scheduler i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
scheduler	Set logging level for scheduler
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level session-mgr

logging level session-mgr i0 | no logging level session-mgr [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
session-mgr	Set level for session-manager syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level smm

[no] logging level smm level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
smm	Set logging level for Shared Memory Manager
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level snmpd

[no] logging level snmpd i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
snmpd	Set level for SNMP syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level spm

[no] logging level spm i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
spm	Set level for spm syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level sysmgr

logging level sysmgr i0 | no logging level sysmgr [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
sysmgr	System Manager syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level tacacs

logging level "tacacs" i0 | no logging level "tacacs" [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
tacacs	TACACS+ syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level track

[no] logging level track i0

Syntax Description


'no'	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
track	Set level for track syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level tunnel

logging level tunnel i0 | no logging level tunnel [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
tunnel	Set level for tunnel syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level u2rib

[no] logging level u2rib i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
u2rib	Set level for u2rib syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level u6rib

[no] logging level u6rib level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
u6rib	Set syslog filter level for U6RIB
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level udld

[no] logging level udld i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
udld	Set level for udld syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ufdm (ufdm)

[no] logging level ufdm i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
ufdm	Set level for ufdm syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level ufdm (ufdm)

logging level ufdm i00 | no logging level ufdm

Syntax Description


no	no
logging	logging
level	level
ufdm	Set level for ufdm syslog msgs
`i00`	Type: integer min: 0 max: 7 0-emerg; 1-alert; 2-crit; 3-err; 4-warn; 5-notif; 6-inform; 7-debug;

Command Modes

/exec/configure

logging level urib

[no] logging level urib level

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
urib	Set syslog filter level for URIB
`level`	Type: uinteger min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level vdc_mgr

[no] logging level vdc_mgr i0

Syntax Description


'no'	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
vdc_mgr	Set level for vdc_mgr syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level virtual-service

[no] logging level virtual-service i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
virtual-service	Set level for vman syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level vlan_mgr

logging level vlan_mgr i0 | no logging level vlan_mgr [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
vlan_mgr	Set level for VLAN syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level vmm

[no] logging level vmm i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
vmm	Set level for vmm syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level vntag

[no] logging level vntag i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
vntag	Set level for vntag syslog messages
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level vpc

[no] logging level vpc i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
vpc	Set level for vPC syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level vshd

[no] logging level vshd i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
vshd	Set logging level for vshd
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level vtp

[no] logging level vtp i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
vtp	Set level for vtp syslog messages
`i0`	Type: integer-range 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging level xbar

[no] logging level xbar i0

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
level	Facility parameter for syslog messages
xbar	xbar syslog level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging logfile

logging logfile s0 i0 [ size i1 ] | no logging logfile [ s0 i0 [ size i1 ] ]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
logfile	Set File logging
`s0`	Type: string Enter the logfile name
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
size	Set logfile size
`i1`	Type: integer min: 4096 max: 4194304 Enter the logfile size in bytes

Command Modes

/exec/configure

logging max_filesize

logging max_filesize i0

Syntax Description


logging	Exec logging commands
max_filesize	Increase default debug logfile size
`i0`	Type: integer

Command Modes

/exec

logging max_messages

logging max_messages i0

Syntax Description


logging	Exec logging commands
max_messages	Increase maximum syslogd message buffer size
`i0`	Type: integer

Command Modes

/exec

logging message interface type ethernet

logging message interface type ethernet info | no logging message interface type ethernet info

Syntax Description


no	Negate a command or set its defaults
logging	Configure logging for interface
message	Interface events
interface	Interface level events
type	Interface type
ethernet	Ethernet interfaces
`info`	Field Names to be added to interface syslog description value: 0x1 Add interface description to interface syslogs

Command Modes

/exec/configure

logging module

[no] logging module [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
module	Set module(linecard) logging
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging monitor

[no] logging monitor [i0]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
monitor	Set terminal line(monitor) logging level
`i0`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug

Command Modes

/exec/configure

logging reconcile

logging reconcile { all [force] | files i0 | vtys i1 | dev s0 }

Syntax Description


logging	Modify message logging facilities
reconcile	Reconcile the internal data structures in syslogd, only use in console connection when all VTYs are closed
all	Reconcile all VTY elements in Files array & VTY list - only supported in console
force	Reconcile all VTY elements in Files array & VTY list - force to run in VTYs or console
files	Reconcile specific element in Files array
`i0`	Type: integer Enter Files array index to reconcile
vtys	Reconcile specific element in VTY list
`i1`	Type: integer Enter VTY list index to reconcile
dev	Reconcile specific dev elements in Files array & VTY list
`s0`	Type: string Enter the dev name to reconcile

Command Modes

/exec/configure

logging server

[no] logging server host0 [ [i1] [ use-vrf { vrf-name | vrf-known-name } | facility { auth | authpriv | cron | daemon | ftp | kernel | local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7 | lpr | mail | news | syslog | user | uucp } ] + ]

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
server	Enable forwarding to Remote Syslog Server
`host0`	Type: nameorip Hostname/IPv4/IPv6 address of the Remote Syslog Server
`i1`	Type: integer min: 0 max: 7 0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
use-vrf	Display per-VRF information
`vrf-name`	Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf \| detail \| interface \| definition \| context \| forwarding \| member \| all \| l2-vrf \| topology \| passive length: 32 VRF name
`vrf-known-name`	Type: vrf Known VRF name
facility	Facility to use when forwarding to server
auth	Use auth facility
authpriv	Use authpriv facility
cron	Use Cron/at facility
daemon	Use daemon facility
ftp	Use file transfer system facility
kernel	Use kernel facility
local0	Use local0 facility
local1	Use local1 facility
local2	Use local2 facility
local3	Use local3 facility
local4	Use local4 facility
local5	Use local5 facility
local6	Use local6 facility
local7	Use local7 facility
lpr	Use lpr facility
mail	Use mail facility
news	Use USENET news facility
syslog	Use syslog facility
user	Use user facility
uucp	Use Unix-to-Unix copy system facility

Command Modes

/exec/configure

logging source-interface

logging source-interface ifName | no logging source-interface

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
source-interface	Enable Source-Interface for Remote Syslog Server
`ifName`	Type: interface Source interface name

Command Modes

/exec/configure

logging timestamp

[no] logging timestamp { microseconds | milliseconds | seconds }

Syntax Description


no	Negate a command or set its defaults
logging	Modify message logging facilities
timestamp	Set logging timestamp granularity
microseconds	Timestamp in micro-seconds
milliseconds	Timestamp in milli-seconds
seconds	Timestamp in seconds (Default)

Command Modes

/exec/configure

logit

logit log

Command Modes

/exec

logout-warning

logout-warning i0 | no logout-warning [i0]

Syntax Description


no	Negate a command or set its defaults
logout-warning	Configure logout warning
`i0`	Type: integer min: 0 max: 60 default: 20 Enter logout warning time in seconds

Command Modes

/exec/configure/line

low-memory exempt

[ no | default ] low-memory exempt

Syntax Description


no	Negate a command or set its defaults
default	Inherit values from a peer template

Command Modes

/exec/configure/router-bgp/router-bgp-neighbor-sess

lshow

Syntax Description


lshow	local show: displays config of current interface

Command Modes

/exec/configure/if-igp

lsp-gen-interval

lsp-gen-interval level max-wait [ initial-wait second-wait ] | no lsp-gen-interval level max-wait [ initial-wait second-wait ]

Syntax Description


no	Negate a command or set its defaults
lsp-gen-interval	Configure LSP generation interval
`level`	IS-IS level level-1 value: 1 Configure LSP generation level-1 interval level-2 value: 2 Configure LSP generation level-2 interval
`max-wait`	Type: uinteger min: 50 max: 120000 default: 8000 Maximum wait between trigger and LSP generation (milli-secs)
`initial-wait`	Type: uinteger min: 50 max: 120000 default: 50 Initial wait between trigger and LSP generation (milli-secs)
`second-wait`	Type: uinteger min: 50 max: 120000 default: 50 Second wait used in LSP generation (milli-secs) during backoff

Command Modes

/exec/configure/router-isis/router-isis-vrf-common

lsp-mtu

lsp-mtu mtu | no lsp-mtu [mtu]

Syntax Description


no	Negate a command or set its defaults
lsp-mtu	Set LSP MTU
`mtu`	Type: integer min: 128 max: 4352 default: 1492 Maximum LSP size in bytes

Command Modes

/exec/configure/router-isis/router-isis-vrf-common

Bias-Free Language

Results

Chapter: L Commands

L Commands

l2 mfwd mroute add

Syntax Description

Command Modes

l2protocol tunnel

Syntax Description

Command Modes

l2protocol tunnel cos

Syntax Description

Command Modes

l2protocol tunnel drop-threshold

Syntax Description

Command Modes

l2protocol tunnel shutdown-threshold

Syntax Description

Command Modes

l3vm event-history

Syntax Description

Command Modes

label-allocation-mode per-vrf

Syntax Description

Command Modes

lacp fast-select-hot-standby

Syntax Description

Command Modes

lacp graceful-convergence

Syntax Description

Command Modes

lacp max-bundle

Syntax Description

Command Modes

lacp min-links

Syntax Description

Command Modes

lacp port-priority

Syntax Description

Command Modes

lacp rate

Syntax Description

Command Modes

lacp suspend-individual

Syntax Description

Command Modes

lacp system-priority

Syntax Description

Command Modes

last

Syntax Description

Command Modes

layer3 peer

Syntax Description

Command Modes

ldap-search-map

Syntax Description

Command Modes

ldap-server deadtime

Syntax Description

Command Modes

ldap-server host

Syntax Description

Command Modes

ldap-server port

Syntax Description

Command Modes

ldap-server timeout

Syntax Description

Command Modes

ldap search-map

Syntax Description

Command Modes

less

Syntax Description

Command Modes

license expiry check_interval

Syntax Description

Command Modes