Negate a command or set its defaults

Virtual MAC address

Type: string

MAC address(FORMAT:xxxx.xxxx.xxxx)

Negate a command or set its defaults

Configure interface mac address

Type: Ethernet

Static Router MAC address

Negate a command or set its defaults

Manually set interface MAC address

Type: ethernet

MAC address

Negate a command or set its defaults

Build a mac list

Type: string

pattern: [!-~]*

length: 63

Name of prefix list

Sequence number of an entry

Type: uinteger

min: 1  max: 4294967294  

Sequence number

Specify routes to forward

Specify routes to reject

Type: ethernet

MAC address

Type: ethernet

MAC Mask. Default Mask is ffff.ffff.ffff

Negate a command or set its defaults

MAC configuration commands

Configure access list

Type: string

length: 64

List name

Negate a command or set its defaults

MAC configuration commands

MAC Address Table

Aging time

Type: uinteger

min: 0  max: 0  

0 disables aging

Type: uinteger

min: 120  max: 918000  

Aging time in seconds.

Type: string

Information

Negate a command

MAC configuration commands

MAC Address Table

Trill Learning for F-PATH VLANS

Type: string

Information

Negate a command

MAC configuration commands

MAC Address Table

Notify of mac-move

MAC move notification on syslog

Negate a command or set its defaults

MAC configuration commands

MAC Address Table

Static Entry

Type: ethernet

MAC Address

VLAN

Type: vlan

VLAN ID

Interface

Type: interface

Interface name

Drop all traffic

Type: string

Information

Negate a command or set its defaults

MAC configuration commands

Force mac classification of packets Not available in this release.

Negate a command or set its defaults

MAC configuration commands

Port policy

Specify access control for packets

Type: string

length: 64

List name

Negate a command or set its defaults

Allow in-band management access to VLAN Interface IP address

Negate a command or set its defaults

Classification criteria

Negate this match result

Access group

Named Access List

Type: string

length: 64

Access List name

IEEE 802.1Q class of service

Type: integer-mrange

List of class-of-service values

DSCP in IP(v4) and IPv6 packets

Type: integer-mrange

List of DSCP values

af11  value: 10

AF11 dscp (001010)

af12  value: 12

AF12 dscp (001100)

af13  value: 14

AF13 dscp (001110)

af21  value: 18

AF21 dscp (010010)

af22  value: 20

AF22 dscp (010100)

af23  value: 22

AF23 dscp (010110)

af31  value: 26

AF31 dscp (011010)

af32  value: 28

AF32 dscp (011100)

af33  value: 30

AF33 dscp (011110)

af41  value: 34

AF41 dscp (100010)

af42  value: 36

AF42 dscp (100100)

af43  value: 38

AF43 dscp (100110)

cs1  value: 8

CS1(precedence 1) dscp (001000)

cs2  value: 16

CS2(precedence 2) dscp (010000)

cs3  value: 24

CS3(precedence 3) dscp (011000)

cs4  value: 32

CS4(precedence 4) dscp (100000)

cs5  value: 40

CS5(precedence 5) dscp (101000)

cs6  value: 48

CS6(precedence 6) dscp (110000)

cs7  value: 56

CS7(precedence 7) dscp (111000)

default  value: 0

default dscp (000000)

ef  value: 46

EF dscp (101110)

Precedence in IP(v4) and IPv6 packets

Type: integer-mrange

List of precedence values

routine  value: 0

Routine precedence (0)

priority  value: 1

Priority precedence (1)

immediate  value: 2

Immediate precedence (2)

flash  value: 3

Flash precedence (3)

flash-override  value: 4

Flash override precedence (4)

critical  value: 5

Critical precedence (5)

internet  value: 6

Internetwork control precedence (6)

network  value: 7

Network control precedence (7)

Discard class Not available in this release.

Type: integer-mrange

List of discard-class values

Qos-group Not available in this release.

Type: integer-mrange

List of qos-group values

Class map Not available in this release.

Type: string

antipattern: type | typ | ty | t | class-default | class | default

length: 40

Match class-map name

Protocol

arp  value: 1

IP ARP

bridging  value: 2

Bridging

cdp  value: 3

Cisco Discovery Protocol

dhcp  value: 7

Dynamic Host Configuration

isis  value: 8

Intermediate System Intermediate System Protocol

Packet

Length of IP datagram

Type: integer-mrange

list of IP packet length

IP

Real Time Protocol

Type: integer-mrange

UDP port list that are using RTP

Match on MPLS label Not available in this release.

Match on MPLS Experimental label

Match on topmost MPLS label

Type: integer-mrange

List of MPLS exp values

Negate a command or set its defaults

Classification criteria

Match with given access group

Name of the access group

Type: string

antipattern: copp-system-p-+(([a-zA-Z0-9] | [- | . | _])*)

length: 64

Match parameter for class-map

Negate a command or set its defaults

Specify the match clause

IP/IPv6/MAC

ip  value: 9

Display IP information

ipv6  value: 10

Display IPv6 information

mac  value: 11

MAC configuration commands

Match an access list

Type: string

length: 64

List name

Negate a command or set its defaults

Match values from routing table

Match BGP peer AS number

Type: string

pattern: ^[1-9][0-9]*,$ | ^[1-9][0-9]*\.[1-9][0-9]*,$

length: 11

<AA4>,

Type: string

pattern: ^[1-9][0-9]*-[1-9][0-9]*,$ | ^[1-9][0-9]*\.[1-9][0-9]*-[1-9][0-9]*\.[1-9][0-9]*,$

length: 22

<AA4>-<AA4>,

Type: string

pattern: ^[1-9][0-9]*$ | ^[1-9][0-9]*\.[1-9][0-9]*$

length: 11

<AA4>,

Type: string

pattern: ^[1-9][0-9]*-[1-9][0-9]*$ | ^[1-9][0-9]*\.[1-9][0-9]*-[1-9][0-9]*\.[1-9][0-9]*$

length: 22

<AA4>-<AA4>,

Negate a command or set its defaults

Match values from routing table

Match BGP peer AS number

AS-path access-list

Type: string

pattern: [!-~]*

length: 63

AS path access list name

Type: string

pattern: [!-~]*

length: 63

AS path access list name

Type: string

Known as-path access-list name

Negate a command or set its defaults

Match values from routing table

Match BGP AS path list

Type: string

pattern: [!-~]*

length: 63

AS path access list name

Type: string

pattern: [!-~]*

length: 63

AS path access list name

Type: string

Known as-path access-list name

Negate a command or set its defaults

Classification criteria

Class map Not available in this release.

Type: string

antipattern: type | typ | ty | t | class-default | class | default

length: 40

class map name

Negate a command or set its defaults

Match values from routing table

Match BGP community list

Type: string

pattern: [!-~]*

length: 63

Community list name

Do exact matching of communities

Negate a command or set its defaults

Classification criteria

IEEE 802.1Q class of service Not available in this release.

Type: integer-mrange

List of class-of-service values

Negate a command or set its defaults

Classification criteria

IEEE 802.1Q class of service Not available in this release.

Type: integer-mrange

List of class-of-service values

Negate a command or set its defaults

Classification criteria

DSCP in IP(v4) packets Not available in this release.

Type: integer-mrange

List of DSCP values

Negate a command or set its defaults

Classification criteria

DSCP in IP(v4) and IPv6 packets

Type: integer-mrange

List of DSCP values

af11  value: 10

AF11 dscp (001010)

af12  value: 12

AF12 dscp (001100)

af13  value: 14

AF13 dscp (001110)

af21  value: 18

AF21 dscp (010010)

af22  value: 20

AF22 dscp (010100)

af23  value: 22

AF23 dscp (010110)

af31  value: 26

AF31 dscp (011010)

af32  value: 28

AF32 dscp (011100)

af33  value: 30

AF33 dscp (011110)

af41  value: 34

AF41 dscp (100010)

af42  value: 36

AF42 dscp (100100)

af43  value: 38

AF43 dscp (100110)

cs1  value: 8

CS1(precedence 1) dscp (001000)

cs2  value: 16

CS2(precedence 2) dscp (010000)

cs3  value: 24

CS3(precedence 3) dscp (011000)

cs4  value: 32

CS4(precedence 4) dscp (100000)

cs5  value: 40

CS5(precedence 5) dscp (101000)

cs6  value: 48

CS6(precedence 6) dscp (110000)

cs7  value: 56

CS7(precedence 7) dscp (111000)

default  value: 0

default dscp (000000)

ef  value: 46

EF dscp (101110)

Negate a command or set its defaults

Classification criteria

Match exception packets

ipv4 match criteria

ipv6 match criteria

Match ip/ipv6 option exception packets

Icmp redirect packets

Send redirected packets back to sender

Send unreachable packets back to sender

IP unicast packets with multicast MAC Not available in this release.

Failed in ttl

mtu-failure

Glean packets

multicast packets

multicast rpf check failure

multicast sg rpf check failure

L3 multicast destination lookup failure

Negate a command or set its defaults

Match values from routing table

Match BGP community list

Type: string

pattern: [!-~]*

length: 63

Extended Community list name

Do exact matching of extended communities

Negate a command or set its defaults

Match values from routing table

Match first hop interface of route

Type: interface

Interface name

Negate a command or set its defaults

Match values from routing table

Configure IP features

Match address of route or match packet

Type: string

pattern: [!-~]*

length: 63

IP access-list name (for use in route-maps for PBR only)

Negate a command or set its defaults

Match values from routing table

Configure IP features

Match address of route or match packet

Match entries of prefix-lists

Type: string

pattern: [!-~]*

length: 63

Name of prefix-list

Type: string

pattern: [!-~]*

length: 63

Name of prefix-list

Type: string

Known prefix-list name

Negate a command or set its defaults

Match values from routing table

Configure IP features

Match multicast attributes

Rendezvous point

Type: ipprefix

IPv4 rendezvous prefix

Multicast rendezvous point type

IPv4 rendezvous point type

ASM  value: 1

rp type ASM

Bidir  value: 2

rp type Bidir

Multicast Group prefix

Type: ipprefix

IPv4 group prefix

Multicast Group address range

Type: ipaddr

First Group address

Range

Type: ipaddr

Last Group address

Multicast source address

Type: ipprefix

IPv4 source prefix

Negate a command or set its defaults

Match values from routing table

Configure IP features

Match next-hop address of route

Match entries of prefix-lists

Type: string

pattern: [!-~]*

length: 63

Name of prefix-list

Type: string

pattern: [!-~]*

length: 63

Name of prefix-list

Type: string

Known prefix-list name

Negate a command or set its defaults

Match values from routing table

Configure IP features

Match advertising source address of route

Match entries of prefix-lists

Type: string

pattern: [!-~]*

length: 63

Name of prefix-list

Type: string

pattern: [!-~]*

length: 63

Name of prefix-list

Type: string

Known prefix-list name

Negate a command or set its defaults

Match values from routing table

Configure IPv6 features

Match address of route or match packet

Type: string

pattern: [!-~]*

length: 63

IPv6 access-list name (for use in route-maps for PBR only)

Negate a command or set its defaults

Match values from routing table

Configure IPv6 features

Match address of route or match packet

Match entries of prefix-lists

Type: string

pattern: [!-~]*

length: 63

Name of prefix-list

Type: string

pattern: [!-~]*

length: 63

Name of prefix-list

Type: string

Known prefix-list name

Negate a command or set its defaults

Match values from routing table

Configure IPv6 features

Match multicast attributes

Rendezvous point

Type: ipv6prefix

IPv6 rendezvous prefix

Multicast rendezvous point type

IPv6 rendezvous point type

ASM  value: 1

rp type ASM

Bidir  value: 2

rp type Bidir

Multicast group address

Type: ipv6prefix

IPv6 group prefix

Multicast Group address range

Type: ipv6addr

First Group address

Range

Type: ipv6addr

Last Group address

Multicast source address

Type: ipv6prefix

IPv6 source prefix

Negate a command or set its defaults

Match values from routing table

Configure IPv6 features

Match next-hop address of route

Match entries of prefix-lists

Type: string

pattern: [!-~]*

length: 63

Name of prefix-list

Type: string

pattern: [!-~]*

length: 63

Name of prefix-list

Type: string

Known prefix-list name

Negate a command or set its defaults

Match values from routing table

Configure IPv6 features

Match advertising source address of route

Match entries of prefix-lists

Type: string

pattern: [!-~]*

length: 63

Name of prefix-list

Type: string

pattern: [!-~]*

length: 63

Name of prefix-list

Type: string

Known prefix-list name

Negate a command or set its defaults

Match values from routing table

Packet length

Type: uinteger

min: 0  max: 2147483647  

Minimum packet length

Type: uinteger

min: 0  max: 2147483647  

Maximum packet length

Negate a command or set its defaults

Match values from routing table

Match entries of mac-lists

Mac-list with destination mac addresses

Type: string

pattern: [!-~]*

length: 63

Mac list

Negate a command or set its defaults

Match values from routing table

Match metric of route

Type: string

pattern: \+-?

length: 2

+-

Type: uinteger

min: 0  max: 4294967295  

Metric value

Type: uinteger

min: 0  max: 4294967295  

Deviation value

Negate a command or set its defaults

Classification criteria

Protocol

IP ARP

Multi-protocol Label Switching Not available in this release.

Match packets with router-alert label set to 1 for OTV Overlay frames

Match packets on MPLS exp bits

Type: uinteger

min: 6  max: 6  

Exp bits value

Negate a command or set its defaults

Classification criteria

Protocol Not available in this release.

FCoE

ISCSI

TCP

Negate a command or set its defaults

Classification criteria

QoS Group

Type: integer-mrange

List of qos-group values

Negate a command or set its defaults

Classification criteria

QoS Group

Type: integer-mrange

List of qos-group values

Negate a command or set its defaults

Classification criteria

Match redirected packets Not available in this release.

Match criteria for redirected packets

dhcp-snoop  value: 3

Match redirected packets for dhcp

arp-inspect  value: 6

Match redirected packets for arp-inspect

Negate a command or set its defaults

Match values from routing table

Match source protocol

Type: string

pattern: [!-~]*

length: 32

Protocol instance name

Negate a command or set its defaults

Match values from routing table

Match tag of route

Type: uinteger

min: 0  max: 4294967295  

Tag value

Negate a command or set its defaults

Match values from routing table

Vlan ID

Type: vlan-mrange

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Negate a command or set its defaults

Feature to limit the number of non-self-originated LSAs

Type: uinteger

min: 1  max: 4294967295  

Set maximum number of non self-generated LSAs

Type: uinteger

min: 1  max: 100  default: 75

Threshold value (%) at which to generate a warning message

Log a warning message when limit is exceeded

Set time during which all adjacencies are suppressed

Type: uinteger

min: 1  max: 71582788  default: 5

ignore-time in minutes

Set count on how many times adjacencies can be suppressed

Type: uinteger

min: 1  max: 4294967295  default: 5

ignore-count

Set number of minutes after which ignore-count is reset to zero

Type: uinteger

min: 1  max: 71582788  default: 10

reset-time in minutes

Negate a command or set its defaults

Feature to limit the number of non-self-originated LSAs

Type: uinteger

min: 1  max: 4294967295  

Set maximum number of non self-generated LSAs

Type: uinteger

min: 1  max: 100  default: 75

Threshold value (%) at which to generate a warning message

Log a warning message when limit is exceeded

Set time during which all adjacencies are suppressed

Type: uinteger

min: 1  max: 71582788  default: 5

ignore-time in minutes

Set count on how many times adjacencies can be suppressed

Type: uinteger

min: 1  max: 4294967295  default: 5

ignore-count

Set number of minutes after which ignore-count is reset to zero

Type: uinteger

min: 1  max: 71582788  default: 10

reset-time in minutes

Negate a command or set its defaults

Set maximum LSP lifetime

Type: integer

min: 1  max: 65535  default: 1200

Maximum LSP lifetime in seconds

Negate a command or set its defaults

Maximize the cost metric

External LSAs

Type: uinteger

min: 1  max: 16777215  

Max metric value for external LSAs

Advertise Max metric for Stub links as well

Effective only at startup

Type: integer

min: 5  max: 86400  default: 600

Wait period in seconds after startup

Wait for an event to advertise normal metric

BGP Convergence

Type: string

length: 20

Tag of BGP to wait for

Summary LSAs

Type: uinteger

min: 1  max: 16777215  

Max metric value for summary LSAs

Negate a command or set its defaults

Maximize the cost metric

External LSAs

Type: uinteger

min: 1  max: 16777215  

Max metric value for external LSAs

Advertise Max metric for Stub links as well

Effective only at startup

Type: integer

min: 5  max: 86400  default: 600

Wait period in seconds after startup

Wait for an event to advertise normal metric

BGP Convergence

Type: string

length: 20

Tag of BGP to wait for

Inter-area-prefix LSAs

Type: uinteger

min: 1  max: 167777215  

Max metric value for summary LSAs

Negate a command or set its defaults

Allow AS-PATH attribute from EBGP neighbor imposing a limit on number of ASes

Type: uinteger

min: 1  max: 512  

Number of ASes in the AS-PATH attribute

Negate a command or set its defaults

Forward packets over multipath paths

Configure multipath for IBGP paths

Type: uinteger

min: 1  max: 64  

Number of parallel paths

Negate a command or set its defaults

Forward packets over multiple paths

Type: uinteger

min: 1  max: 32  default: 8

Number of paths

Negate a command or set its defaults

Set maximum paths per destination

Type: integer

min: 1  max: 64  default: 8

Maximum paths per destination

Negate a command or set its defaults

Maximum paths per destination

Type: integer

min: 1  max: 64  default: 8

Maximum paths per destination

Negate a command or set its defaults

Maximum paths per destination

Type: integer

min: 1  max: 64  default: 8

Maximum paths per destination

Negate a command or set its defaults

RIP set maximum paths per route

Type: integer

min: 1  max: 64  default: 16

Maximum paths per prefix

Negate a command or set its defaults

Forward packets over multipath paths

Configure multipath for both EBGP and IBGP paths

Type: uinteger

min: 1  max: 64  

Number of parallel paths

Negate a command or set its defaults

Maximum number of peers for this prefix

Type: uinteger

min: 1  max: 1000  

Max. peers limit

Negate a command or set its defaults

Maximum number of IP prefixes acceptable in aggregate

Type: uinteger

min: 1  max: 0  

Number of IP prefixes for maximum-prefix limit

Type: integer

Threshold value (%) at which to generate a warning message

Only give warning message when limit is exceeded

Duration for which a prefix source is ignored

Type: integer

min: 1  max: 0  

Restart interval in minutes

Number of times sessions are auto-restarted

Type: integer

min: 1  max: 0  

Number of times

Duration after which restart history is cleared

Type: integer

min: 1  max: 0  

Reset time in minutes

Exponentially increase restart time interval

Negate a command or set its defaults

Inherit values from a peer template

Maximum number of prefixes from this neighbor

Type: uinteger

min: 1  max: 4294967295  

Max. prefix limit

Type: uinteger

min: 1  max: 100  

Threshold percentage at which to generate a warning

Restart bgp connection after limit is exceeded

Type: uinteger

min: 1  max: 65535  

Restart interval in minutes

Only give a warning message when limit is exceeded

Negate a command or set its defaults

Set a limit

Maximum number of routes allowed in this routing table

Type: uinteger

min: 1  max: 4294967295  

Maximum number of routes allowed

Type: integer

min: 1  max: 100  

Threshold value (%) at which to generate a warning msg

Reinstall previous rejected route due to over maximum route limit

Type: integer

min: 1  max: 100  

Threshold value (%) at which to reinstall routes back to VRF

Only give a warning message if limit is exceeded

Negate a command or set its defaults

mcectest configuration commands

source of oob packets

Type: interface

interface

Type: ipaddr

IPv4 address (A.B.C.D)

Negate a command or set its defaults

Backbone Multicast Distribution Tree Not available in this release.

Use (*,G) only state, no remote source state is created

Negate a command or set its defaults

Backbone Multicast Distribution Tree Not available in this release.

Configure settings for Data MDT

Type: ipprefix

List of group range prefixes

Data MDT switching threshold

Type: uinteger

min: 0  max: 4294967  default: 0

Threshold in kilobits per sec

Specify policy for creating Data MDTs

Type: string

length: 63

A route-map name

Negate a command or set its defaults

Backbone Multicast Distribution Tree Not available in this release.

Configure settings for Data MDT

Allow creation of data mdts for bidir customers

Negate a command or set its defaults

Backbone Multicast Distribution Tree Not available in this release.

Configure settings for Data MDT

No reusing data mdts in the backbone network

Negate a command or set its defaults

Backbone Multicast Distribution Tree Not available in this release.

The default group

Type: ipaddr

IP multicast group address

Negate a command or set its defaults

Backbone Multicast Distribution Tree Not available in this release.

Depend on BGP MDT SAFI for auto-discovery

Negate a command or set its defaults

Backbone Multicast Distribution Tree Not available in this release.

The MTU

Type: uinteger

min: 576  max: 65535  default: 1376

MTU value

Negate a command or set its defaults

Backbone Multicast Distribution Tree Not available in this release.

PIM protocol related parameters

Hello interval used between peers

Type: uinteger

min: 1  max: 18724286  default: 30000

Interval in milliseconds

Negate a command or set its defaults

Backbone Multicast Distribution Tree Not available in this release.

PIM protocol related parameters

Join-Prune interval used between peers

Type: uinteger

min: 60  max: 65520  default: 60

Interval in seconds

Negate a command or set its defaults

Backbone Multicast Distribution Tree Not available in this release.

Source interface to be used in the backbone network

Type: interface

Use IP address of this interface

Negate a command or set its defaults

Media type of the VLAN

Select media type

enet  value: 1

Vlan type Ethernet

Negate a command or set its defaults

Configure Interface medium mode

broadcast  value: 0

Broadcast medium

p2p  value: 1

Point-to-Point medium

Negate a command or set its defaults

Configure Interface medium mode

Broadcast medium

Point-to-Point medium

Negate a command or set its defaults

Set fabricpath topology VLAN membership

Configure VLANs for Fabricpath Topology

Type: vlan-mrange

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Negate a command or set its defaults

NVE VN-Segment Membership

Virtual Network Identifier

Type: integer-range

vni range, Example: 5000 or 5001-5008

NVE Multicast Group

Type: ipaddr

Multicast IP Prefix

Type: ipaddr

Multicast IP Prefix

merge

merge configuration (to running-config)

Type: uri

the file containing the destination configuration, a patch will be created and applied to the running-config's matching section (format accordning to 'show run section' command output)

only show the patch, don't execute it

Negate a command or set its defaults

Message digest authentication password (key)

Type: integer

min: 1  max: 255  

Key ID

Use MD5 algorithm

Type: password

OSPF password (key)

Negate a command or set its defaults

Message digest authentication password (key)

Type: integer

min: 1  max: 255  

Key ID

Use MD5 algorithm

Type: password

The OSPF password (key)

Negate a command or set its defaults

Configure metric style used in advertised LSPs

Use both narrow and wide metric style

Negate a command or set its defaults

Cost of direct routes

Cost of direct routes

direct route cost is zero to be compatible with IOS

Negate a command or set its defaults

Modify EIGRP routing metrics and parameters

Advertise EIGRP routes greater than <hops> as unreachable

Type: uinteger

min: 1  max: 255  default: 100

Hop count

Negate a command or set its defaults

Modify EIGRP routing metrics and parameters

Defines RIB scaling value

Type: uinteger

min: 1  max: 255  default: 128

Rib scale

Negate a command or set its defaults

Modify EIGRP routing metrics and parameters

Modify EIGRP metric version

64 bit metric version

Negate a command or set its defaults

Modify EIGRP routing metrics and parameters

Modify EIGRP metric coefficients

Type: uinteger

min: 0  max: 8  default: 0

Type Of Service (Only TOS 0 supported)

Type: uinteger

min: 0  max: 255  default: 1

K1

Type: uinteger

min: 0  max: 255  default: 0

K2

Type: uinteger

min: 1  max: 255  default: 1

K3

Type: uinteger

min: 0  max: 255  default: 0

K4

Type: uinteger

min: 0  max: 255  default: 0

K5

Type: uinteger

min: 0  max: 255  default: 0

K6

Negate a command or set its defaults

PM Management Policy

Type: string

length: 80

Name of the policy

Permit access

Deny access

IPV4 address

Type: ipaddr

IPV4 source address/subnet

Type: ipaddr

IPV4 mask

IPV6 Address

Type: ipv6prefix

IPV6 source address/subnet

Protocol

TCP protocol

UDP protocol

ICMP protocol

Source port

Type: integer

min: 0  max: 65535  default: 0

Source port

Type: integer

min: 0  max: 65535  default: 0

Source Port end

Destination port

Type: integer

min: 0  max: 65535  default: 0

Destination port

Type: integer

min: 0  max: 65535  default: 0

Destination Port end

Create new directory

Type: uri

Directory name

Negate the command

Module serial number

Type: string

length: 20

Serial number

Negate a command or set its defaults

Operational mode of the VLAN

ce  value: 0

Classical Ethernet VLAN mode

fabricpath  value: 1

Fabricpath VLAN mode

Negate a command or set its defaults

Configure Ethernet SPAN sessions

Configure Ethernet ERSPAN sessions

Configure granularity for ERSPAN Type III sessions Not available in this release.

100 microseconds

100 nanoseconds

1588 in seconds/nanoseconds

nanoseconds

Negate a command or set its defaults

Configure Ethernet SPAN sessions

Configure Ethernet ERSPAN sessions

Configure the erspan origin ip address

Configure global origin IP address

Type: ipaddr

Configure in default VDC across all VDCs

Negate a command or set its defaults

Configure Ethernet SPAN sessions

Configure Ethernet ERSPAN sessions

Configure the erspan switch-id

Type: integer

min: 1  max: 1023  

erspan-switch-id

Configure Ethernet SPAN sessions

Configure session preferences

Type: integer

min: 1  max: 32  

Specify a session type

Create a local session

Configure Ethernet SPAN sessions

Configure session preferences

Type: integer

min: 1  max: 32  

Specify a session type

Create an acl-capture session Not available in this release.

Configure Ethernet SPAN sessions

Configure session preferences

Type: integer

min: 1  max: 32  

Specify a session type

Create an erspan source session

mount expansion flash or USB storage

mount USB drive in port 1

mount USB drive in port 2

mount expansion flash or USB storage

mount expansion flash

Move files

Type: uri

Source file path

Type: uri

Destination file path

run mping

mping line-cards

slot information

Type: integer-range

mping supervisor

slot information

Type: integer-range

Negate a command or set its defaults

MPLS configuration commands

Label properties

Label range

Type: integer

min: 16  max: 471804  

Minimum label value

Type: integer

min: 16  max: 471804  

Maximum label value

Specify block of labels for static bindings

Type: integer

min: 16  max: 471804  

Minimum static label value

Type: integer

min: 16  max: 471804  

Maximum static label value

Negate a command or set its defaults

MPLS related OSPF config

LDP related OSPF config

LDP Autoconfig related OSPF config

Configure area properties

Type: ipaddr

Area Id as an integer or ip address

Negate a command or set its defaults

MPLS related OSPF config

LDP related OSPF config

LDP Sync on all interfaces

Simulate sync send

Negate a command or set its defaults

OSPF MPLS configuration commands

OSPF MPLS Traffic Engineering commands

Configure area properties

Type: ipaddr

Area Id as an integer or ip address

Negate a command or set its defaults

OSPF MPLS configuration commands

OSPF MPLS Traffic Engineering commands

MPLS TE multicast support

Negate a command or set its defaults

OSPF MPLS configuration commands

OSPF MPLS Traffic Engineering commands

Router ID associated with TE

Type: interface

Routable Interface