Explains how to adjust the cadence at which the health check status is refreshed on Cisco NCS 1014 so that the system reports metric updates at the interval that suits your monitoring requirements.
A health check refresh cadence is a configurable system parameter that
-
determines how often Cisco NCS 1014 updates and reports health check status,
-
defines the time interval, in seconds, between consecutive metric refreshes, and
-
enables administrators to customize monitoring to match their operational requirements.
By default, the health check refresh cadence is set to 60 seconds, meaning health check status is updated every 60 seconds. You can change this interval by using the healthcheck cadence [cadence-value] command, where [cadence-value] specifies your preferred time interval in seconds.
The following example shows how to change the health check cadence value to 50 seconds so that health check status is updated every 50 seconds.
RP/0/RP0/CPU0:ios(config)#healthcheck cadence 50