System Setup and Software Installation Guide for Cisco NCS 1014, IOS XR Releases 26.x.x
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Important. Results generated by AI. Before using results, verify accuracy and completeness.
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Launch error. Something went wrong. Please try again.
System Setup and Software Installation Guide for Cisco NCS 1014, IOS XR Releases 26.x.x
Updated: June 9, 2026
This chapter describes ACL configuration for Cisco NCS 1014, including ACL behavior, rule application, IPv4 and IPv6 tasks, and verification guidance.
This section explains access control lists and the key attributes you need to understand before configuring IPv4 or IPv6 packet filtering.
Provides links to ACL configuration procedures for Cisco NCS 1010, including IPv4, IPv6, extended ACL, and ACL modification tasks.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.