Provides details about the procedures and components used for upgrading system software and installing feature packages on the NCS 1014.
This reference topic provides the chapter-level entry point for system upgrade, feature package installation, FPD upgrade, software compatibility, and factory reset topics.
For details about the chapter topics, see these references:
Software and firmware compatibility matrix
Describes the FPGA and optics firmware versions that are compatible with supported NCS 1014 hardware and Cisco IOS XR software releases.
Upgrade the software on NCS 1014
Configure and install a new Cisco IOS XR software version on the NCS 1014 platform.
FPD upgrades
Explains the FPD types, Golden FPD behavior, and status values that you use to evaluate firmware state before upgrading NCS 1014 hardware.
Factory reset
Describes factory reset behavior, limitations, and data-removal locations that help prepare an NCS 1000 chassis for product return and replace processing.