Remove and replace USB 3.0 interface

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

	1.	Pull the flash memory stick from the USB port.
	2.	To replace a Cisco USB Flash memory stick, insert the module into USB port 1. The Flash memory stick can be inserted or removed regardless of whether the router is powered up or not.

Procedure