Details procedures for safely removing and replacing field replaceable units including SSDs, power supplies, USB interfaces, DIMMs, fans, SFP/SFP+ modules, batteries, and outlines router repacking steps to maintain hardware reliability.
Install and remove SSD
Outlines procedures for installing and removing SSDs, providing step-by-step instructions for both tasks to ensure correct handling and replacement within supported hardware.
Install and remove AC power supplies
Explains how to install and remove AC power supplies in network equipment, with clear guidance on each process to ensure safe and proper management of AC power components.
Install and remove DC power supplies
Details installation and removal of DC power supplies, covering the wiring of DC input power sources and safe disconnection and replacement to maintain uninterrupted device operation.
Remove and replace USB 3.0 interface
Provides instructions for removing and replacing the USB 3.0 interface, ensuring proper handling and secure installation or removal of USB-based components.
Remove and replace a DIMM
Describes steps for removing and replacing a DIMM, including specific procedures for safe extraction and installation to maintain memory integrity in hardware systems.
Remove the fans for Cisco 8500 Series Secure Routers
Guides through removing fans from Cisco 8500 Series Secure Routers, outlining safe removal steps to support maintenance and system cooling reliability.
Install and remove SFP and SFP+ modules
Details installation and removal of SFP and SFP+ modules, including laser safety guidelines and proper removal of small form pluggable modules to ensure compliant and secure connectivity.
Remove and replace the battery
Explains how to safely remove and replace router batteries, providing clear steps for both removal and installation to support continued reliable device operation.
Repack the router
Outlines procedures for repacking the router, emphasizing proper techniques and precautions to prevent damage during transportation or storage.