This section lists the SNMP MIBs supported on the NCS 1004 and provides links to related documentation and configuration guidance.
NCS 1004 supports the following SNMP MIBs:
-
CISCO-AM-SNMP-MIB
-
CISCO-CONFIG-MAN-MIB
-
CISCO-FLASH-MIB
-
CISCO-ENTITY-REDUNDANCY-MIB
-
CISCO-SYSTEM-MIB
-
CISCO-ENTITY-ASSET-MIB
-
EVENT-MIB
-
DISMAN-EXPRESSION-MIB
-
CISCO-FTP-CLIENT-MIB
-
NOTIFICATION-LOG-MIB
-
CISCO-RF-MIB
-
RADIUS-AUTH-CLIENT-MIB
-
RADIUS-ACC-CLIENT-MIB
-
IEEE8023-LAG-MIB
-
CISCO-TCP-MIB
-
UDP-MIB
-
CISCO-BULK-FILE-MIB
-
CISCO-CONTEXT-MAPPING-MIB
-
CISCO-OTN-IF-MIB
-
CISCO-ENHANCED-MEMPOOL-MIB
-
CISCO-PROCESS-MIB
-
CISCO-SYSLOG-MIB
-
ENTITY-MIB
-
CISCO-ENTITY-FRU-CONTROL-MIB
-
CISCO-IF-EXTENSION-MIB
-
RMON-MIB
-
HC-RMON-MIB
-
CISCO-OPTICAL-MIB
-
CISCO-ENTITY-SENSOR-MIB
-
LLDP-MIB
-
CISCO-ALARM-MIB
-
IEEE8021-SECY-MIB (only SNMP read-only operations are supported for this MIB)
The following table provides more information about SNMP MIBs and related documentation links.
| Task |
Link |
|---|---|
| Determine the MIB definitions |
|
| Configure SNMP |
|
| Understand SNMP best practices about the recommended order of SNMP query, maximum cache hit, and SNMP retry and timeout recommendation |
Make sure that you configure snmp-server community as the SystemOwner to have the admin-plane parameters to appear to entity MIB. The parameters of fans and power supply units are examples of admin-plane parameters.