Configuration Guide for Cisco NCS 1004, IOS XR Release 25.x.x
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Important. Results generated by AI. Before using results, verify accuracy and completeness.
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Launch error. Something went wrong. Please try again.
Configuration Guide for Cisco NCS 1004, IOS XR Release 25.x.x
Updated: July 31, 2026
Configuration procedures, management tasks, and CLI command guidelines for creating and applying custom fault profiles to manage data path alarm severities on Cisco NCS 1004 systems.
Explains how fault profiles enable customized fault severity management and action for system alarms.
Configure and apply a fault profile at the system, node, or propagation level to manage fault events and alarm s.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.