This topic lists the show commands you can use to display information about a Bridge-Group Virtual Interface (BVI).
To display information about the BVI status and packet counters, use the these commands:
| Command | Purpose |
|---|---|
| show interfaces bvi identifier [accounting | brief | description | detail ] |
Displays interface status, line protocol state, and packet counters for the specified BVI. |
| show adjacency bvi identifier [detail | remote] |
Displays packet and byte transmit counters per adjacency to the specified BVI. |
| show l2vpn bridge-domain detail |
Displays the reason that a BVI is down. |