Overview
Use this procedure to add a switch to the Nodes Pending Registration tab on the Fabric Membership work pane using the CLI. The system checks if the node exists and registers it if necessary.
Use this procedure to add a switch to the Nodes Pending Registration tab on the Fabric Membership work pane using the CLI.
This procedure is identical to "Registering an Unregistered Switch Using the CLI". When you execute the command, the system determines if the node exists and, if not, adds it. If the node does exist, the system registers it.
Procedure
[ no ] system switch-id serial-number switch-id name pod id role leaf node-type tier-2-leaf Adds the switch to the pending registration list. |