Cisco APIC Getting Started Guide, Release 6.2(x)

PDF

Nexus dashboard cluster from APIC GUI

Updated: January 12, 2026

Want to summarize with AI?

Log in

Overview

This topic explains the direct navigation feature from the APIC GUI to a registered Nexus Dashboard cluster, available from APIC Release 6.1.4, requiring both systems to meet specific version requirements and granting super admin privileges to remote users with admin-write access.

Starting with APIC Release 6.1.4, users can directly navigate to a registered Nexus Dashboard cluster from the APIC GUI without a separate login, provided both systems meet the minimum version requirements.

  • Direct navigation to a registered Nexus Dashboard cluster from the APIC GUI is available starting with APIC Release 6.1.4.

  • The Nexus Dashboard must be running Release 4.1 or later, and the APIC must be running Release 6.1.4 or later for this feature to be supported.

  • Only remote users with admin-write privileges on APIC, authenticated through LDAP, RADIUS, or TACACS+, can use this navigation and are granted super admin privileges on the Nexus Dashboard.

See Connecting Clusters article to navigate to APIC from Nexus Dashboard.

Before you begin

  • Ensure that the NTP servers on both the APIC and Nexus Dashboard are configured to synchronize with the same time source.

  • APIC must be onboarded as a site within the Nexus Dashboard.

  • The user must log in to the APIC as a remote user.

  • The remote user must have admin-write privileges on the APIC. This user will have super admin privileges on the Nexus Dashboard.

  • Ensure that the client system is configured with the DNS domain for the Nexus Dashboard, as APIC uses the Nexus Dashboard's hostname for navigation.

Procedure

1.

Log in to the APIC GUI.
2.

Navigate to Nexus Dashboard cluster using one of these methods:

  • In the upper right corner of the APIC window, click the Launch the ND Cluster icon.

    The registered Nexus Dashboard clusters are displayed.

    Click the desired Nexus Dashboard cluster to navigate.

    APIC starts the active node in the Nexus Dashboard cluster.

  • On the menu bar, choose Integrations > Nexus Dashboard .

    The registered Nexus Dashboard clusters are displayed in a table.

    Check the desired cluster, click … , and choose Open in New Tab to navigate to the Nexus Dashboard cluster.