When will TMS use H.323 URIs for dialing?

Available Languages

Updated:April 23, 2015
Document ID:112422

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This article relates to Cisco TelePresence Management Suite.

Q. When will TMS use H.323 URIs for dialing?

A. If the IP Zone a system is associated to has the URI Domain Name defined, TMS assumes any system in that zone that is registered to an H.323 gatekeeper can make or receive H.323 calls using URIs for the alias.

TMS will not dial URI between two systems that are both associated to the same IP Zone but rather dial by E.164 instead. If the systems are associated to different IP Zones, and both zones have the URI domain name defined, TMS will use a URI by appending the URI domain name to the alias of the system to be called.

Related Information

Revision History

Revision Publish Date Comments
1.0
23-Apr-2015
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products