When are management settings enforced on systems in TMS?

Available Languages

Updated:April 23, 2015
Document ID:112551

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This article relates to Cisco TelePresence Management Suite.

Q. When are management settings enforced on systems in TMS?

A. If Enforce Management settings is enabled under Administrative Tools > Configuration > Network Settings, TMS will push settings to systems on the Force System Refresh Interval defined on the same page. A manual push can be initiated on this page with the Enforce Now button.

For very large networks, it may take additional time for TMS to work its way through all systems. Settings can be pushed for an individual system on demand on the Settings page for the system under Systems > Navigator. For details on which management settings are pushed onto systems, please see the TMS Product Support document for the specific system type.

Related Information

Revision History

Revision Publish Date Comments
1.0
23-Apr-2015
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products