I want to set up redundancy for TMS, which load balancer does TANDBERG recommend?

Available Languages

Updated:April 23, 2015
Document ID:112569

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This article relates to Cisco TelePresence Management Suite.

Q. I want to set up redundancy for TMS, which load balancer does TANDBERG recommend?

A. TANDBERG does not recommend or document the configuration of specific load balancing products, but rather documents the functionalities and capabilities that a load balancer must provide to be compatible with TMS. Selection and configuration of a particular load balancing product is a choice left to the customer, as each customer's needs will vary.

The TANDBERG Management Suite is designed to be compatible with and deployed in redundant configurations, and several levels of resiliency to suit a customer's needs and cost targets are available. For more information regarding TMS Redundancy, see the TMS Redundancy Configuration and Overview Document.

Related Information

Revision History

Revision Publish Date Comments
1.0
23-Apr-2015
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products