Slack

Updated: July 8, 2026

Want to summarize with AI?

Learn how the Slack integration sends Cisco Multicloud Defense alerts to an incoming webhook through an Alert Service Profile and associated Alert Rule.

Once configured, Multicloud Defense alerts will sent to a Slack Incoming Webhook URL using the defined Alert Service Profile and Rule.

Create a Slack Alert Rule

Before you begin

You must create a Slack alert profile before you create an alert rule.

Procedure

	1.	Navigate to System and Accounts > Service Alerts > Alert Rules.
	2.	Click Create.
	3.	Profile Name - Enter unique name for the integration. Example `mcd-slack-alert-rule`.
	4.	(Optional)Description - Enter a description for the aler trule.
	5.	Alert Profile - Expand the drop-down menu and select a Microsoft Teams alert profile.
	6.	Type - Expand the drop-down menu and select one of the following types: System Logs Audit Logs Discovery If you select Audit Logs, there are no other configurable items. Click Save to finalize the rule.
	7.	If you select either System Logs or Discovery as your Type, then expand the Sub Type drp-down menu and select one of the following options: Gateway Account Controller
	8.	Expand the Severitydrop-down menu and select one of the following labels. Note that the options below are dependent on the Type you selected in step 7. Info Warning Medium High Critical
	9.	Enabled - This option is checked by default to enable and implement this alert immediately after saving. Unceck this box if you do not to immediately apply the rule to your environment.
	10.	Click Save.

Create an Alert Profile Service

Before you begin

In order to complete the steps in this guide, you will need:

A Slack account with an incoming webhook URL configured.

Tip

Create a Slack account (https://slack.com/get-started#/create).

Create an incoming Webhook (https://slack.com/help/articles/115005265063-Incoming-webhooks-for-Slack#set-up-incoming-webhooks).

Procedure

	1.	Navigate to System and Accounts > Service Alerts > Services.
	2.	Click Create.
	3.	Name - Enter unique name for the alert integration. Example `mcd-slack-profile`.
	4.	Description (optional) - Enter a description for the alert integration.
	5.	Type - Using the pulldown, choose Slack.
	6.	API URL - Specify the Slack Webhook URL generated above, or other Slack Webhook URL as desired.

What to do next

Create an alert rule with this new profile.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.