Delete a Profile

Updated: July 8, 2026

Want to summarize with AI?

Delete a packet capture profile along with existing gateway associations.

Use the following procedure to delete a packet capture profile. This process includes removing any and all existing gateway associations as well as deleting the profile.

Procedure

	1.	Navigate to Infrastructure > Profiles > Packet Capture and select the appropriate profile Type.
	2.	View the profile details and examine the associated gateways.
	3.	Remove all gateway associations. See Remove a Gateway Association for more information.
	4.	Navigate to Infrastructure > Profiles > Packet Capture and select the same profile type that you selected in step 1.
	5.	Check the box next to the profile you want to delete.
	6.	Click Delete.
	7.	Click Yes or No to either confirm or cancel the delete action.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.