Hardware Installation Guide for the Cisco 8100 Series Secure Routers
Introduces the initial installation process by describing hardware unpacking steps and identifying all items included with your router to ensure readiness for subsequent installation tasks.
This chapter describes how to install and connect Cisco 8100 Series Secure Routers to LAN and WAN networks.
This chapter describes how to install and connect Cisco 8100 Series Secure Routers to LAN and WAN networks. Unpack the router only when you are ready to install it. If the installation site is not ready, to prevent accidental damage, keep the chassis in its shipping container until you are ready to install. The router, accessory kit, publications, and any optional equipment you order may be shipped in more than one container. When you unpack the containers, check the packing list to ensure that you have received all the listed items.
Unpack the box and verify that all items listed on the invoice were shipped with the Cisco 8100 Series Secure Routers.
These items are shipped with your router:
Getting Started/Product Document of Compliance
Grounding Lug Kit
Power Supply
AC Power Cord