Release Notes for Cisco Catalyst SD-WAN Control Components, Release 20.18.x

Upgrade

Log files cleanup during software upgrade

The Cisco IOS-XE software upgrade has been improved to clean outdated files from flash before upgrade.

Cisco Catalyst SD-WAN Monitor and Maintain

Ease of use

QoS queue statistics

You can monitor traffic across network interfaces and tunnels with real-time and historical statistics. This feature extends the existing QoS interface-level view to include class-level traffic insights and per-tunnel QoS statistics.

Cisco RADKit in Cisco SD-WAN Manager

The Cisco Remote Automation Development Kit (RADKit), a tool for remote automation and troubleshooting, is integrated directly into Cisco SD-WAN Manager. This integration provides the capability to enable or disable the RADKit service using the API in Cisco SD-WAN Manager.

CoR SaaS - Application Path Status Alarms

Cisco IOS XE Catalyst SD-WAN device triggers three new alarms. These alarms indicate the status of CoR-SaaS application paths. This feature adds a path-status field to the cloudexpress-application-change notification. Alarms are categorized into Major, Medium and Minor based on the path status: unreachable, reachable and disabled, respectively.

Cisco Catalyst SD-WAN Analytics Traffic Logs Integration and Insights

This feature introduces traffic logs and security connection event logs in SD-WAN Manager powered by SD-WAN Analytics for filtered data retrieval.

Advisory

This feature provides centralized visibility into security vulnerabilities and critical Field Notices for your Cisco SD-WAN network. It offers EoX Status section that provides detailed End-of-Support and End-of-Sale information for effective replacement and upgrade planning.

BFD Troubleshooting for Cisco Catalyst SD-WAN

This feature allows you to get detailed BFD session information on devices to diagnose issues like packet flow, state transitions, and configuration discrepancies.

Pending requests for upgrading a device Protocol Pack

If you attempt to execute a Protocol Pack upgrade for a set of devices, it is possible that one or more of the devices are using a software version that does not support the Protocol Pack. In this case, the upgrade does not proceed for those devices.

You can choose an option for Cisco SD-WAN Manager to keep the pending request to upgrade the device’s Protocol Pack, to execute later. Cisco SD-WAN Manager checks the device when it receives a software upgrade, and if the new software version supports the Protocol Pack, Cisco SD-WAN Manager completes the upgrade.

Delete Protocol Packs

You can delete a Protocol Pack loaded into Cisco SD-WAN Manager. This is useful for removing Protocol Packs that are no longer in use in your network.

Upgrade

Cisco SD-WAN Control Components Upgrade Workflow

With the guided workflow you can upgrade the software image of all the Cisco SD-WAN Control Components.
It also allows you to apply patch release upgrades to Cisco SD-WAN Control Components, for bug fixes and minor improvements

From Cisco Catalyst SD-WAN Control Components Release 20.18.1, you can schedule full OS and patch upgrades for Cisco SD-WAN control plane components (SD-WAN Manager, SD-WAN Validator, SD-WAN Controller) for a specific future date and time.

Hosted edge services

You can monitor hosted edge services (IOx applications) for health, associated devices, version, and IOx state using the Cisco Catalyst SD-WAN Manager interface. You can also start or stop the hosted edge services.

Underlay health visibility

This feature provides enhanced monitoring and troubleshooting capabilities for the underlying network infrastructure that supports your Cisco SD-WAN overlay.

Device Software Upgrade Workflow Enhancements

The new workflow for device software upgrade includes the following key enhancements:
• Uploading software image from local drive.
• Filtering devices for software upgrade using device tags and network hierarchy.
• Scheduling a software upgrade based on a device's local time zone.

Software reliability

Configuration Consistency across Cisco SD-WAN Controllers

This process ensures consistency in configuration across all Cisco SD-WAN Controllers using a multi-stage approach. The multi-stage approach includes the following stages:
* Validation: Cisco SD-WAN Manager instructs Cisco SD-WAN Controllers to validate the configuration.
* Application: Cisco SD-WAN Manager instructs Cisco SD-WAN Controllers to validate and apply the configuration.
* Rollback (Optional): Cisco SD-WAN Manager reverts changes if any issues arise during the application stage.
This process prevents issues arising from Cisco SD-WAN Controllers operating on different configurations.

Safety Barriers

Safety barriers protect the Cisco SD-WAN Controller during resource constraints by monitoring CPU, memory, and disk usage. When thresholds are exceeded, safety barriers generate alarms and restrict services that can further impact resource availability.

Cisco Catalyst SD-WAN Cloud OnRamp

Ease of use

Cloud OnRamp for SaaS for user-defined SaaS application lists

Cisco SD-WAN Manager supports adding, editing, and deleting user-defined probe endpoints for applications listed in the application catalog. Applications with endpoint details are eligible for:
• cloud monitoring, and
• steering through best path.

You can also create an application list with applications having a common probe endpoint and enable Cloud OnRamp for SaaS for that application list.

Ease of setup

Enhancements to Enable Connectivity to an existing AWS Transit Gateway

This feature enables you to discover and connect a cloud gateway to an existing AWS Transit Gateway created in the AWS portal.

Cisco Catalyst SD-WAN Getting Started

Ease of setup

Automated Certificate Management with EST and SCEP

With this feature, EST (Enrollment over Secure Transport) and SCEP (Simple Certificate Enrollment Protocol) helps automate the process of enrolling and renewing certificates on devices and services using Cisco SD-WAN Manager.

Cisco SD-WAN Control Components Settings on Cisco SD-WAN Manager

This feature simplifies the configuration of settings for Cisco SD-WAN Control Components.

First time Settings on Cisco SD-WAN Manager

This feature introduces a task flow to setup all the initial settings by a first-time user of Cisco SD-WAN Manager.

Default enablement of SD-AVC

The SD-AVC component is enabled by default in new Cisco Catalyst SD-WAN environments. The control for enabling or disabling is in Administration > Settings > SD-AVC.

Cloud-hosted SD-AVC service for on-premises environments

This release extends the use of a cloud-hosted SD-AVC service to on-premises installations of Cisco Catalyst SD-WAN where internet access is available.

Ease of use

Global search for Cisco SD-WAN Manager

The search box in the SD-WAN Manager header enables you to search for information related to devices, network, and so on. The integration of role-based access control (RBAC) ensures that only authorized users can access data.

Configuration Database Upgrade for a Cisco SD-WAN Manager Cluster using the CLI

This feature improves configuration database backup and restore functionality with API-driven and manual options, logging and metadata, efficient disk space management, and CLI enhancement for configuration database cloud backup at the cluster level.

JWT based authentication for APIs

This feature supports Java Web Token (JWT) based authentication, enabling external applications to access Cisco SD-WAN Manager functionalities. API tokens can be generated within the Cisco SD-WAN Manager and shared with these applications, allowing them to access SD-WAN Manager through JWT authorization.

Add Controller and Validator Components Workflow

The Add Controller and Validator Components workflow adds these SD-WAN Control Components to the Cisco SD-WAN fabric.

Software reliability

Block Netconf on Cisco Catalyst SD-WAN device

This feature introduces a security update for Cisco IOS XE Catalyst SD-WAN devices. It blocks NETCONF requests on all IP addresses except the system IP to enhance device security. Starting from Cisco IOS XE Catalyst SD-WAN Release 17.18.1a, the feature blocks port 830 by default.

Staging for certificate installation on WAN edge devices

When Cisco SD-WAN Manager installs a new certificate on a WAN edge device, the device first tests the certificate in a staging step before proceeding with installing the certificate. The device verifies that it can successfully establish control connections using the certificate.

WAN edge device certificate management workflow

The WAN Edges Certificate Management workflow updates the authentication certificates for edge devices in the network. This is useful for updating certificates before they expire.

SD-WAN Control Components certificate management workflow

The Control Components Certificate Management workflow updates the authentication certificates for SD-WAN Control Components in the fabric. This is useful for updating certificates before they expire.

Licensing process

Support for Cisco PKI Certification

This feature allows Cisco SD-WAN Manager to transition from vManage signed certificates to Cisco PKI as the default certificate method for virtual routers to enhance security and reliability.

Cisco Catalyst SD-WAN Policy Groups

Ease of use

Version Management for Security Policy

With this feature you can track and manage changes to your security policies using the version history.

Support for Topology Tagging

With this feature you can add devices to a topology using tags.

Cisco Catalyst SD-WAN Policies

Ease of use

DTA Support for FNF Statistics

Cisco IOS XE Catalyst SD-WAN devices use DTA to handle all FNF statistics.

Software reliability

Policy Information in Service Tunnel Path

This feature aims to detect when policy download fails and raises an Alarm (policy-enforcement-status). Additionally, this feature introduces new service-path show commands.

Cisco Catalyst SD-WAN Security

Ease of use

Custom IPS signature packages

With the custom IPS signature Packages, you can create custom Snort3 IPS signature sets, modify IPS rule actions, and add comments for traceability in Cisco SD-WAN Manager.

Security Cloud Control Integration with Cisco SD-WAN Manager

Security Cloud Control is a cloud-based multi-device manager that facilitates management of security policies in highly distributed environments to achieve consistent policy implementation.
Security Cloud Control's integration with Cisco SD-WAN Manager provides centralized management for Cisco Catalyst SD-WAN Branch WAN environments. The integration allows you to do the following:
• Efficiently manage security policies and objects, configure and edit them, and push changes using the Security Cloud Control dashboard.
• Effective monitoring and detection of security threats from a centralized Security Cloud Control dashboard.
• Analyze security threats from logs and events in Security Cloud Control dashboard using data sent from Security Analytics and Logging.

Anti-Replay Recovery Support

This feature enables recovery support when there is anti-replay packet drops in the data plane with IPsec due to packets delivered out of order outside of the anti-replay window.

Ease of setup

SGT Propagation with Cisco TrustSec Integration using Configuration Groups

With this feature you can configure SGT propagation using TrustSec feature under Other Profile in a configuration group in Cisco SD-WAN Manager.

Cisco IOS XE Catalyst SD-WAN Alarms

Software reliability

OMP ribout memory usage alarm

The OMP ribout memory usage alarm monitors and alerts about the memory buffer utilization of OMP ribout.

BFD Scale Threshold Alarm

Cisco IOS XE Catalyst SD-WAN device triggers an alarm based on BFD session usage.
The alarm can indicate one of the four states: Healthy, Notice, Warning, or Critical, depending on the level of BFD session usage

Ease of use

SD-AVC Troubleshooting alarm

The SD-AVC troubleshooting alarm is generated for out-of-sync information between the SD-AVC component and Cisco SD-WAN Manager. The information can relate to Protocol Packs, cloud-sourced applications, custom applications, or SaaS feeds. This alarm also indicates device alerts.

Cisco IOS XE Catalyst SD-WAN Qualified Commands

Ease of use

Removal of Telnet service from IOS-XE

This feature provides a secure method to disable Telnet access on IOS-XE platforms. Once disabled, Telnet can only be re-enabled via factory reset, ensuring tamper-proof access control.

Software reliability

NAT Serviceability

To ease the troubleshooting, show ip nat status and show running nat commands are introduced.

Cisco Catalyst SD-WAN Rugged Series Router Configuration

Ease of use

Raw socket

You can transport serial data across your IP networks by configuring TCP or UDP options through configuration groups on supported Cisco rugged routers.

Upgrade

Wi-Fi Module Firmware Upgrade using Cisco SD-WAN Manager

Cisco SD-WAN Manager supports upgrading the Wi-Fi module firmware on Cisco IR1800 platforms.

Ignition power management: configuration group support and real-time monitoring

Configure and monitor ignition power and sensing capabilities of IR1800 routers using Cisco SD-WAN Manager. It prevents the router from draining a vehicle's battery and keeps the
router running when the vehicle is stopped, eliminating reload times each time the vehicle restarts.

Cisco Catalyst SD-WAN Licensing

Licensing process

Assigning high availability licenses

When using the license assignment workflow, an HA License option streamlines the process of assigning high availability (HA) licenses to secondary devices in an HA scenario.

Cisco Enterprise Agreement Workspace integration

Cisco SD-WAN Manager can transfer licenses from the Cisco Enterprise Agreement Workspace to Cisco Smart Software Manager (Cisco SSM). This enables the synchronization between SD-WAN Manager and Cisco SSM to include licenses acquired through the Cisco Enterprise Agreement system.

License management report

The license management report describes how many licenses have been assigned in the network, how many devices have been assigned licenses, per-device license details, and so on. View the reports on the Reports page.

Cisco Catalyst SD-WAN Systems and Interfaces

Upgrade

P-LTE-450 MHz Module Firmware Upgrade using Cisco SD-WAN Manager

Cisco SD-WAN Manager supports upgrading the P-LTE-450 MHz module firmware on the following platforms:
* Cisco IR1101 platform
* Cisco IR1800 Series platforms

Ease of use

Reset the profile configuration of a cellular modem

This sub-feature of the Cellular Controller feature enables you to reset the configuration of a cellular modem operating on a device using the CLI.

Ease of setup

Configuring and Monitoring P-LTE-450 modules using Cisco SD-WAN Manager

You can configure category P Long-Term Evolution (LTE) 450MHz Pluggable Interface Module (PIM), referred to as P-LTE-450, on rugged series routers using the Ethernet interface in Cisco SD-WAN Manager. Additionally, Cisco SD-WAN Manager enables you to monitor the module's performance through the monitoring dashboard.

P-LTE-450 modules supports Cisco IR1101 Rugged Series Router and Cisco IR1800 Rugged Series Router.

Cisco Catalyst SD-WAN Network-Wide Path Insight

Ease of use

Automatic security alert tracing option

A new Security Alert option has been added to the auto-tracing features, initiating a trace and capturing details whenever UTD detects security issues like IPS and file reputation alerts in Cisco Catalyst SD-WAN.

Export and import traces

If you perform a trace and find a network issue, you can export the trace information to analyze externally. For example, the information may be useful for troubleshooting as part of a Cisco Technical Assistance Center (TAC) case.

You can import a saved trace to view the details in Cisco SD-WAN Manager.

Cisco Catalyst SD-WAN High Availability

Software reliability

Controller Group Redundancy

Cisco Catalyst IOS XE devices ensure consistent connectivity by connecting to specified controllers in their Control Group List. They maintain redundancy by switching to alternate controllers within or across groups when primary controllers are unavailable.

Cisco Catalyst SD-WAN AppQoE

Hardware reliability

Cisco Secure Routers support for AppQoE

The following Cisco Secure Routers are supported for AppQoE:

·       C8231-E-G2

·       C8235-E-G2

·       C8355-G2

·       C8475-G2

·       C8455-G2

·       C8161-G2

·       C8151-G2

In custom role configuration for Role-Based Access Control (RBAC) using Configuration Goups, a Change device variables button is added in place of the Deploy button that allows you to modify device-specific values during the deploy process, before initiating the deployment.

See the Edit Custom Role.

INFO Alarm for Missing Transceivers on Cisco Catalyst SD-WAN Devices

From Cisco SD-WAN version 20.18.x, an INFO alarm is displayed on Cisco Catalyst devices when a transceiver is missing, and the port remains in a NO shut state. This update reserves the alarm LED for critical issues, ensuring it is not triggered by non-critical conditions while maintaining operational visibility.

Manual save for configuration group updates.

Removed the auto-save feature from configuration groups and added a manual Save button. Also removed the Undo button, which was relevant for auto-save.

ca-check-strict command added under crypto-pki-trustpoint.

ca-check-strict is a new cli command, added under crypto pki trustpoint. If you enable this command, the peer will reject a CA certificate without basic constraints.

Multitenancy support: Multitenant environments support integration with Cisco Secure Equipment Access (SEA) and third-party custom applications only at the tenant level.

See the following sections for more details:
Restrictions for Cisco Secure Equipment Access integration
Restrictions for third-party custom application integration

Cisco Secure Equipment Access (SEA) and third-party custom application integration workflow changes.

See the following sections for more details:
Configure Cisco Secure Equipment Access integration, high level
Configure third-party custom application integration, high level

The encapsulation command is optional while configuring a tunnel interface in Cisco Catalyst SD-WAN Validator.

See Configure Cisco Catalyst SD-WAN Validator for more details.

The default OMP hold time is reduced to 300 seconds.

See the following sections for more details:
Configure the OMP Holdtime
Timers
Timers

You can disable weak SSH encryption algorithms for Cisco SD-WAN Validator
and Cisco SD-WAN Controller.

See the Information About Disabling Weak SSH Encryption Algorithms on Cisco SD-WAN Manager section.

Enable or disable Cisco SD-WAN Analytics.

Cisco SD-WAN Manager provides the option to enable or disable Cisco SD-WAN Analytics. For more information, see Enable or Disable Cloud Services.

In Cisco SD-WAN Manager, on the Configuration > Configuration Catalog page, the label for a column has changed from Origin to Source. In this column, Catalog indicates that a configuration group has been imported from a catalog and is read-only. You can edit configuration groups with User as the source.

See Install a catalog entry for details.

The character limit for local user accounts remains restricted to 32 characters. However, for TACACS users, usernames extend up to 128 characters.

See the Configuring Local Access for Users and User Groups section.

Third-party custom application images can be uploaded to SD-WAN Manager without activating Cisco IOx on devices.

See Activate Cisco IOx on devices section for more details.

You can adjust the TCP Maximum Segment Size (MSS) even for a TCP packet encapsulated in an MPLS label. You can set the TCP MSS per the Path Maximum Transmission Unit (PMTU) with 30 bytes to account for Layer 2 headers, such as Ethernet, VLAN tags and MPLS headers.

See the Information About Layer 2 VPN Support within the Cisco Catalyst SD-WAN Overlay Network.

Limitation for enabling Cloud Services.

While a Protocol Pack upgrade for devices in the network is in process, or is scheduled and pending, you cannot enable Cloud Services. See Enable Cloud Services.

Disk Quota Checks at Admin Tech Generation and Image Upload.

Ensures disk space limits are not exceeded during admin tech generation and image uploads on Manager, with checks for disk usage across scenarios and nodes in a cluster. See Information About Admin Tech for Collecting System Information..

Certificate Expiration Dates

Cisco SD-WAN Manager uses epoch time for certificate expiration dates, ensuring time zone consistency. See Information About Expired Certificate Indication and Quarantine.

Sequential Upgrade for Devices on the Same Site.

Upgrades within the same site are halted if a device fails, skipping subsequent devices. See Software Upgrade in the Cisco Catalyst SD-WAN Monitor and Maintain Configuration Guide.

CPU and Memory ranges in tooltips for Cisco IOS XE Catalyst SD-WAN Devices are accurately displayed on Cisco SD-WAN Manager.

View WAN Edge Health Pane for more details.

Log message for throttling throughput due to license entitlement

The Quick Connect workflow supports up to 500 devices at a time. See Restrictions for Quick Connect workflow.

Port Hop functionality deprecated.

The port hop functionality for the system port-hop field and interfaces port-hop field is deprecated. Instead, use the Full Port Hop field.

Quick Connect workflow device limit.

The Quick Connect workflow supports up to 500 devices at a time. See Restrictions for Quick Connect workflow.

The attachfeature API now requires the isEdited and isMasterEdited flags to be set to 'True' as appropriate when attaching a Device Template. Set isMasterEdited to 'True' for Master Template edits and isEdited to 'True' for Feature Template edits to ensure changes are correctly applied.

See Feature Template for more details.

CSCwd58323

Cisco SD-WAN Manager Azure AD SSO maxAuthenticationAge is fixed at 7200 seconds

CSCwm14592

Cisco SD-WAN Manager UI Password create or update

CSCwm45553

Time format was changing in API body in Cisco SD-WAN Manager in 20.14/20.15

CSCwp12663

No restrictions have been applied to upload files under diagnostic log capture.

CSCwm83954

Unable to enter AS-Path list longer than 32 characters

CSCwm92001

Underlay Measurement and Tracing Services modelling is not correct

CSCwm97086

Configuration Group: deleted feature parcel remains in list view

CSCwn04371

Neo4j does not remove DR Cisco SD-WAN Manager chassis-id once DR configuration is removed

CSCwn18532

Cisco SD-WAN Manager - Configuration Group service profile: Switchport is not responding

CSCwn24493

Unable to update edited copied feature template Default_BootStrap_Cisco_System_Template on Cisco SD-WAN Manager

CSCwn26880

When using cli based centralized policy, config-db doesn't remove commented lines from the config

CSCwn33483

Policy Group Deployment: ambiguous Failed to deploy device with Policy Group error message

CSCwn34053

Need to include pointers on the configurations to add Cisco Catalyst SD-WAN Validator and Cisco Catalyst SD-WAN Controller in Cisco SD-WAN Manager UI

CSCwn41014

Enabling Per-tunnel QoS Aggregator on cellular interface results in error on preview

CSCwn51488

Multiple active userSessions exist on Cisco SD-WAN Manager even after controller upgrade transaction completes

CSCwn51590

Error not handled in UI - Invalid TG API Key generates no UI error

CSCwn55852

NullPointerException error seen if a CSG with port-channel is configured with a PG with Zscaler

CSCwn56891

show alarm history gives exception ValueError("time data %r does not match format %r")

CSCwn61388

A space is required for custom application defined in IPv4

CSCwn69650

Follow up on Lodash upgrade

CSCwn75393

Tunnel Configuration on GRE (or IPSec) Profile parcel under the Service VPN Parcel cannot be changed

CSCwn81322

SSO Single Logout is not working

CSCwn81610

Local user with expired password is redirected to SSO Login

CSCwn88445

Cisco SD-WAN Manager does not generate snmp-server trap-source Port-channel xx configuration using feature template

CSCwn96141

Cisco SD-WAN Manager configuration-group template incorrectly sets interface MTU and IP MTU on 40G interfaces.

CSCwn96853

Cisco SD-WAN Manager role access issues to Monitor > Devices > Troubleshooting

CSCwo00101

Cisco SD-WAN Manager 20.16.1 : cannot use custom port for alarm email notification.

CSCwo12125

SD-WAN Validator restarts due to "got signal 11"

CSCwo20628

API call to /dataservice/device/reachable returns empty[]

CSCwo26043

MT Cisco SD-WAN Manager: tenant admin is unable to modify an alarm notification rule

CSCwo32490

Fabricated Reboot Event is generated after Control Connection Flap

CSCwo32576

Unified Security Policy -Ruleset causing deployment failure due to object or group not configured.

CSCwo44239

Dropdown for Service Chain in Policy Configuration does not display any of the configured Service Chain

CSCwo45368

Include email in subject, not SAN, in Cisco SD-WAN Manager Web Server Certifcate CSR

CSCwo52495

Cisco SD-WAN Manager gives error Input Json Payload validation failed for service chain

CSCwo52922

License not found in Cisco SD-WAN Manager DB although it is present

CSCwo72101

Port List in Manager GUI doesn't allow adding ports higher than 65530

CSCwo76533

Configuring VPN Interface T1/E1/Serial template, the interface name cannot be defined as a variable

CSCwo93942

Facing multiple issues under Alarm UI in monitoring tab.

CSCwp12653

Unable to display interface details. Diagnostic log capture failed.

CSCwo96831

Unable to schedule upgrade for devices using later/now.

CSCwo99545

Error retrieving: ('Connection aborted.', RemoteDisconnected('Remote end closed connection without response'))

CSCwp02180

Object groups cannot be referenced under Cisco SD-WAN Manager Configuration -> Security -> Define Lists -> Rule Set after an upgrade

CSCwp11066

Cisco SD-WAN Manager reloads due to ConfD got signal 9 due to clickhouse memory exhaustion

CSCwp11220

 Cisco SD-WAN Manager 20.15.3 does not decrypt type 6 password for TACACS+ server using CLI Template

CSCwp18519

Experiencing issues with Cisco SD-WAN Manager RBAC (Role-Based Access Control) permissions related to Configuration Groups, Feature Profiles, and Policy Groups.

CSCwp28358

Cisco SD-WAN Manager: Alarms do not get generated even though event is generated.

CSCwp32081

Cisco SD-WAN Manager Configuration Groups -> System -> OMP -> ecmp limit should show error if above threshold

CSCwp32515

Cisco SD-WAN Manager: Alarm filter with STATE(Active/Cleared) not available in 20.12 release

CSCwp38011

Support replication of File System Data as part of DR

CSCwp38115

OMP Graceful Restart timer default value is set to 120 for Cisco Catalyst 8000V Azure Template

CSCwp55823

Configuration Group variables removed when unassigned device is deployed and then removed

CSCwp65998

Rate limit value for URL non bulk api will be reset to default 100 after reboot in 20.12 / 20.15

CSCwp83222

Cisco SD-WAN Manager: IP Route realtime table does not display multiple next-hop entries for ECMP routes

CSCwp85929

Cisco SD-WAN Controller: Changing sequence of the rules in centralized policy causes mis programming.

CSCwp87365

Data Prefix validation does not work.

CSCwp97237

20.12.4.1 – If one IDP enabled and one IDP is disabled, it causes an Internal Server Error

CSCwp98827

Embedded Security Rules fail to load due to high number of service profiles

CSCwp99414

Post DR switchover, certificate workflow cannot reach Cisco Catalyst SD-WAN Validator

CSCwq15493

Group of Interests, including the pre-defined ones, get deleted. by CISCO

CSCwq23889

attachfeature API does not process devices when multiple entries share the same templateId in deviceTemplateList

CSCwq27461

Cisco SD-WAN Manager: Unable to reorder application priority & SLA rules using sequence dropdown

CSCwq28772

On Cisco SD-WAN Manager 20.15.3 preferred remote color restrict does not work in UX2.0

CSCwq61556

Validation checks are failing while onboarding the Catalyst 8000 vEdge to the Manager device.

CSCwp14077

Unable to load the view details for security events details in security dashboard.

CSCwp84371

Unwanted error popup for adding new profile.

CSCwq91481

DR: Scale configuration causes neo4j to crash and restart in secondary when deleting & importing SYSTEMDEVICESNODE

CSCwq21361

Cisco SD-WAN Manager GUI upgrade from 20.15.2 to 20.15.3 fails, need to perform the CLI upgrade

CSCwq54162

Unable to copy or import several configuration groups with System, Transport, Management profile.

CSCwq33835

DR replication fails with large configuration - Neo4j OOM on standby