Monitors the real-time operating mode and firmware status of the Wi-Fi module installed in an IR1800 router. The status is available through Cisco SD-WAN Manager .
View the real-time status and operating mode of the Wi-Fi module installed in an IR1800 router using Cisco SD-WAN Manager .
Use this task to quickly check the operational mode (such as WGB mode or CAPWAP mode) and firmware status of Wi-Fi modules managed through the Cisco SD-WAN Manager interface.
Before you begin
-
Ensure the IR1800 router is managed by Cisco SD-WAN Manager and is operating in controller mode.
-
Confirm that a Wi-Fi module is installed in the IR1800 router.
Follow these steps to monitor the wireless status in Cisco SD-WAN Manager :
Procedure
-
From the Cisco SD-WAN Manager menu, choose .
-
Choose a IR1800 device by clicking its name in the Hostname .
-
Click Real Time in the left pane.
-
From the Device Options drop-down list in the right pane, choose Wireless Status to view the current operating mode and firmware information of the Wi-Fi module.
The wireless status page displays the real-time operating mode and firmware version of the Wi-Fi module for the selected IR1800 router.
What to do next
If the displayed status seems inaccurate (for example, EWC is shown when no module is present), verify the physical installation and operational state of the Wi-Fi module on the device.