Monitors WLAN output and client details on Cisco Catalyst IR1800 rugged routers through Cisco SD-WAN Manager . The real-time commands display WLAN VLAN IDs and client MAC addresses.
Cisco Catalyst SD-WAN Rugged Series Router Configuration Guide, Release 26.x and Later
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Cisco Catalyst SD-WAN Rugged Series Router Configuration Guide, Release 26.x and Later
Updated: November 2, 2026
Want to summarize with AI?
Log inMonitors WLAN output and client details on Cisco Catalyst IR1800 rugged routers through Cisco SD-WAN Manager . The real-time commands display WLAN VLAN IDs and client MAC addresses.
From the Cisco SD-WAN Manager menu, choose Monitor > Devices > Real Time .
In the Device Options field, type Wireless SSID and choose Wireless SSID from the drop-down list.
NoteThe real-time command Wireless SSID doesn't show the SSID type.
See the details of the WLAN along with the VLAN ID associated with them.
From the Cisco SD-WAN Manager menu, choose Monitor > Devices > Real Time .
In the Device Options field, type Wireless Clients and choose Wireless Clients from the drop-down list.
Note
The real-time command Wireless Clients doesn't show the client types.
View both the wired and wireless client details using the Wireless Clients realtime command.
See the details of the clients with their MAC addresses.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.