Describes how Ignition Power Management enables control and monitoring of power supply to network devices. Helps users maintain optimal device performance and protection during power fluctuations or ignition events in industrial environments.
Feature history of Ignition Power Management
Describes ignition power management features for automotive routers. Helps users prevent battery drain and maintain router operation during vehicle stops, improving system reliability and reducing reload times.
Ignition Power Management in SD-WAN Manager
Describes how ignition power management prevents a router from draining a vehicle battery by controlling power based on the vehicle's ignition state. Helps users avoid battery depletion and configure shutdown delays.
Supported devices for ignition power management
Describes the devices that support ignition power management. Provides users with information to identify compatible hardware for this feature.
Use Cases for Ignition Power Management
Describes how ignition power management enables routers to operate only when vehicles are in use, helping users optimize network connectivity and conserve power in fleet deployments.
Configure ignition power management using a configuration group
Configures ignition power management by creating and applying a feature within a System profile using a configuration group. This task enables centralized control of ignition power settings for SD-WAN devices.
Enable Ignition Power Management Using a CLI Template
Enables ignition power management on the router using CLI commands to control detection of vehicle ignition status, battery type, shutdown delay, and undervoltage threshold. This task configures essential power management parameters for automotive deployments.
Monitor Ignition Power Management
Monitors ignition power management for supported IR1800 devices using the vManage interface. Provides step-by-step instructions to access and view real-time ignition power management data.
Verify the Ignition Power Management Configuration
Describes how to verify the ignition power management configuration using device commands. Provides examples for both 12 V and 24 V battery types to help users confirm correct settings and thresholds.