Cisco Catalyst SD-WAN Rugged Series Router Configuration Guide, Release 26.x and Later

PDF

Cisco Catalyst SD-WAN Rugged Series Router Configuration Guide, Release 26.x and Later

Configure WIM on Cisco Catalyst IR1800 Rugged Routers in WGB Mode

Updated: November 2, 2026

Want to summarize with AI?

Log in

Configures WIM on Cisco Catalyst IR1800 Rugged Routers in WGB Mode through CLI templates in Cisco SD-WAN Manager. CLI templates execute commands in global config mode by default.

In Cisco SD-WAN Manager, configure WIM on Cisco Catalyst IR1800 Rugged Routers in WGB Mode using the CLI templates. For more information about using CLI templates, see CLI Add-on Feature Templates and CLI Templates.

Note

By default, CLI templates execute commands in global config mode.

Procedure

  1. Enter the wireless-bridge submode: wireless-bridge

  2. Create a WLAN profile for open authentication: ssid-profile ssid profile name ssid ssid name authentication open

  3. Create a WLAN profile for WPA2-PSK authentication: ssid-profile ssid profile name ssid ssid name authentication auth-type key-management wpa2 secret-key secret key word the unencrypted secret key

  4. Assign the WLAN profile to the Wi-Fi radio using the WGB mode: dot11Radio 0 or 1 mode wgb ssid-profile ssid profile name

  5. Assign the WLAN profile to the Wi-Fi radio using the uWGB mode: dot11Radio 0 or 1 mode uwgb client_mac ssid-profile ssid profile name

  6. Assign the WLAN profile to the root-AP mode to serve wireless clients: dot11Radio 0 or 1 mode root-ap

  7. Add a VLAN interface: dot11Radio 0 or 1 mode root-ap wlan wlan profile name

  8. Enable the radio: dot11Radio 0 or 1 enable

  9. Assign the operating channel for radio in root-AP mode: dot11Radio 0 or 1 channel channel-number width

The following example shows how to configure a clear text password:

wireless-bridge
         ssid-profile wlan2 ssid secured_ssid authentication psk key-management wpa2 secret-key 0 12345678
         dot11Radio 0 mode wgb ssid-profile test-ssid
         dot11Radio 0 mode root-ap
         dot11Radio 1 mode root-ap wlan test-wlan
         dot11Radio 0 enable
         dot11Radio 1 enable
         dot11Radio 0 channel 5 10