Home
Support
Product Support
Routers
Cisco SD-WAN
Configuration Guides

Cisco Catalyst SD-WAN Rugged Series Router Configuration Guide, Release 26.x and Later

Releases

26.x and Later
17.x

View all Saved Content

PDF

Is this content helpful?

Helpful Unhelpful

Suggestions for Improvement

Thank you for your feedback. Your response has been recorded.

Ask about this content

Cisco Catalyst SD-WAN Rugged Series Router Configuration Guide, Release 26.x and Later

Expand all sections

About this content

Ignition power management

Feature history of Ignition Power Management
Ignition Power Management in SD-WAN Manager
Supported devices for ignition power management
Use Cases for Ignition Power Management
Configure ignition power management using a configuration group
Enable Ignition Power Management Using a CLI Template
Monitor Ignition Power Management
Verify the Ignition Power Management Configuration

Digital IO

Feature history of Digital IO
Digital IO
Supported Devices
Use Cases for Digital IO
Enable Digital IO Using a CLI Template
Verify the Digital IO Status

GPS Dead Reckoning

Feature history of GPS Dead Reckoning
GPS Dead Reckoning in SD-WAN Manager
Supported devices for GPS Dead Reckoning
GPS Dead Reckoning prerequisites
Use cases for GPS Dead Reckoning
Enable GPS Dead Reckoning using a CLI template
Disable GPS Dead Reckoning using a CLI template
View the GPS Module Details
Verify the status of GPS Dead Reckoning

Configure WIM on Cisco Catalyst IR1800 Rugged Series Routers

Feature history of configuring WIM on Cisco Catalyst IR1800 rugged series routers
WIM configuration on Cisco Catalyst IR1800 rugged routers
Devices supporting WIM in Cisco Catalyst IR1800 rugged routers
Prerequisites for configuring WIM on Cisco Catalyst IR1800 rugged routers
Restrictions for configuring WIM on Cisco IR1800 rugged routers
Use cases for configuring WIM on Cisco Catalyst IR1800 rugged routers
Configure WIM on Cisco Catalyst IR1800 Rugged Routers in CAPWAP Mode
Configure WIM on Cisco Catalyst IR1800 Rugged Routers in WGB Mode
Verify WIM configuration on Cisco Catalyst IR1800 rugged routers
Monitor WIM on Cisco Catalyst IR1800 rugged routers using Cisco SD-WAN Manager

Global Navigation Satellite System Support on PIMs

Feature history of Global Navigation Satellite System support on PIMs
Global navigation satellite systems on pluggable interface modules
Benefits of GNSS
Supported devices for GNSS on PIMs
Configure GNSS on PIMs using a CLI template
Verify GNSS on PIMs

Raw socket

Feature history of Raw socket
Raw socket in SD-WAN Manager
Restrictions for raw sockets
Supported devices for raw sockets
Configure a raw socket without VRF using a configuration group
Configure a raw socket with VRF using a configuration group
Monitor a raw socket
Monitor a raw socket using the CLI

Wireless monitoring

Feature history of wireless monitoring
Wireless monitoring in SD-WAN Manager
Restrictions for wireless monitoring in SD-WAN Manager
Monitor the wireless status in Cisco SD-WAN Manager

Cisco Catalyst SD-WAN Rugged Series Router Configuration Guide, Release 26.x and Later

Global navigation satellite systems on pluggable interface modules

Updated: November 2, 2026

Want to summarize with AI?

On this page

Satellite navigation services on pluggable interface modules

Explains how pluggable interface modules provide satellite navigation services, including geolocation and time synchronization, to Cisco IOS XE Catalyst SD-WAN devices and their connected devices.

A global navigation satellite system on pluggable interface modules is a satellite navigation feature that

offers geolocation services and precise time synchronization to Cisco IOS XE Catalyst SD-WAN devices and their connected devices
supports satellite networks such as GPS, GLONASS, Galileo, and BeiDou, and
enables configuration through Cisco SD-WAN Manager for Cisco IOS XE Catalyst SD-WAN devices equipped with PIM modules that support GNSS.

Satellite navigation services on pluggable interface modules

Pluggable interface modules provide satellite navigation services from multiple satellite networks.

These modules deliver geolocation and time synchronization capabilities.

GPS
GLONASS
Galileo
BeiDou

Configuration is possible using Cisco SD-WAN Manager for supported Cisco IOS XE Catalyst SD-WAN devices.

Need help?

Open a support case

(Requires a Cisco Service Contract)

Bias-free language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.