Introduction
How can I set up the Wireless Settings on a Cisco Small Business VOIP Router?
Related Information
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.
In order to set up and improve your wireless network's signal, change your Wireless Network Name (SSID) and/or try using a different channel. For instructions, complete these steps:
Change your Router's SSID and Channel
Step 1:
Access the router's web-based setup page. For instructions, click here.Step 2:
When the router's web-based setup page appears, click Wireless.Step 3:
Look for Wireless Network Name (SSID). If it is still set to "linksys", change it to something unique. and click Save Settings.Step 4:
After you change your SSID, try to change channels in order to get around interferences. Preferred channels to use are 1, 6, and 11 since they are considered non-overlapping channels.
Step 5:
Click
.
Revision | Publish Date | Comments |
---|---|---|
1.0 |
12-Dec-2008 |
Initial Release |