This document describes the process to get the Advanced Malware Protection (AMP) license entitled and access to the Dashboard.
Contributed by Uriel Islas, Cisco TAC Engineer.
Cisco recommends that you have the knowledge of:
AMP for Endpoints license
This document is not restricted to specific software version, however this document in based on this software:
AMP Public Cloud
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any step.
In order to entitle your AMP For Endpoints (AMP4E) product, you can refer to the eDelivery email or an entitlement email.
Note: If you do not have access to the eDelivery email, you can contact: firstname.lastname@example.org or visit the online portal at http://cisco.com/tac/caseopen. After select the appropriate technology and sub-technology, select Licensing listed under Type of Problem.
AMP For Endpoints Credentials
AMP4E credentials belongs to the Cisco Security Account (CSA) domain. As soon as the first Cisco Security accounts is set-up, you would be able to add further security admins within your organization. At the moment that you apply your license to raise a new cloud instance, you create a CSA or you can enter the license using your existing CSA credentials. Once done, an organization must be tied for your business.
How to Set-up a New Public Cloud
Step 1. Navigate under the URL provided in the eDelivery email or entitlement email.
Step 2. Select your prefer Cloud Data Center.
Note: Americas cloud can be used for all countries. There are no issues related with latency for countries that are far away.
Step 3. Link your Cisco Security Account to the AMP cloud.
a) If you already have the credentials for a CSA, but not for AMP4E, click on Log in. This option must link your CSA to the AMP cloud.
b) f you do not have an AMP cloud or Cisco Security Org set up, click on Create Account to apply the license for your company.
Step 4. If your company does not have a CSA, then enter the values for all the fields as requested to set up.