Fix Vulnerabilities Shown on Secure Endpoint

Introduction

This document describes how to check Cisco risk score for endpoints and apply fixes.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

• Cisco Secure Endpoint console

Components Used

The information in this document is based on these software versions:

• Secure Endpoint Console v5.4.2025030619

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.

Problem

The Cisco Security Risk Score is represented on a scale from 0-100. It quantifies the risk of a vulnerability by looking at the technical severity and how real-world attackers are leveraging the vulnerability in the wild.

Check the Cisco Security Risk score for endpoints and apply suggested fix.

Solution

1- To look into the Cisco Security risk score, navigate to Management > Computers and select Cisco Security Risk Score shown:

2- You see the list of computers. Expand the computer information you want to check and click Cisco Security Risk Score number displayed as shown:

3- You see list of CVE’s affecting the endpoint. Click Fix Available as shown below:

4- Here you see the suggested fixes for the CVE listed as shown below:

Note: If there are no fixes available, contact TAC.