Table Of Contents
Readme for Cisco Unity Connection Release 8.5(1) Service Update 2
Contents
System Requirements
Requirements for Cisco Unity Connection Release 8.5(1) Service Update 2
Requirements for Cisco Unity Connection
Requirements for Cisco Unity Connection in Cisco Unified CMBE
Compatibility Information
Determining the Software Version
Cisco Unity Connection Application
Cisco Personal Communications Assistant Application
Cisco Unified Communications Operating System
Version and Description
New and Changed Support and Functionality—Release 8.5(1) Service Update 2
Exchange 2007 and Exchange 2003 Are Supported with Single Inbox
Language Files Are Available
Reconfiguration Required When the Unified Messaging Services Account Has an Exchange 2010 Mailbox
Important Note
Related Documentation
Documentation for Cisco Unity Connection
Documentation for Cisco Unified Communications Manager Business Edition
Installation Information
Downloading Cisco Unity Connection Release 8.5(1) Service Update 2 Software
Reverting to the Connection Version on the Inactive Partition
Caveat Information
Open Caveats—Connection Release 8.5(1) SU 2
Resolved Caveats—Connection Release 8.5(1) SU 2
Related Caveats—Cisco Unified Communications Manager 8.5(1) Components That Are Used by Connection 8.5(1)
Obtaining Documentation and Submitting a Service Request
Cisco Product Security Overview
Readme for Cisco Unity Connection Release 8.5(1) Service Update 2
Revised April 03, 2012 (Originally published February 9, 2011)
This readme file contains installation and support information for Cisco Unity Connection Release 8.5(1) Service Update 2. (The service update can also be applied to Cisco Unified Communications Manager and Cisco Unified Communications Manager Business Edition servers.)
Caution
If the Connection server is running an engineering special with a full Cisco Unified Communications Operating System version number between 8.5.1.12019-x and 8.5.1.12899-x, do not upgrade the server to Connection 8.5(1) SU 2 because the upgrade will fail. Instead, upgrade the server with an ES released after 8.5(1) SU 2 that has a full Unified Communications OS version number of 8.5.1.13xxx.x or later to get the SU 2 functionality.
Contents
•System Requirements
•Version and Description
•New and Changed Support and Functionality—Release 8.5(1) Service Update 2
•Important Note
•Related Documentation
•Installation Information
•Reverting to the Connection Version on the Inactive Partition
•Caveat Information
•Obtaining Documentation and Submitting a Service Request
•Cisco Product Security Overview
System Requirements
•Requirements for Cisco Unity Connection Release 8.5(1) Service Update 2
•Requirements for Cisco Unity Connection
•Requirements for Cisco Unity Connection in Cisco Unified CMBE
•Compatibility Information
•Determining the Software Version
Requirements for Cisco Unity Connection Release 8.5(1) Service Update 2
Before you install Cisco Unity Connection release 8.5(1) Service Update 2, see the supported upgrade information in the "Version and Description" section.
Requirements for Cisco Unity Connection
System Requirements for Cisco Unity Connection Release 8.x contains the most current Connection requirements. The document is available at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html.
Requirements for Cisco Unity Connection in Cisco Unified CMBE
System Requirements for Cisco Unity Connection in Cisco Unified CMBE Release 8.x contains the most current requirements for Connection in Cisco Unified CMBE. The document is available at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucmbesysreqs.html.
Compatibility Information
The following documents list the most current version combinations qualified for use with Cisco Unity Connection, and with Connection in Cisco Unified CMBE (where applicable):
•Compatibility Matrix: Cisco Unity Connection and the Software on User Workstations
•SCCP Compatibility Matrix: Cisco Unity Connection, Cisco Unified Communications Manager, and Cisco Unified Communications Manager Express
•SIP Trunk Compatibility Matrix: Cisco Unity Connection, Cisco Unified Communications Manager, and Cisco Unified Communications Manager Express
The documents are available on Cisco.com at http://www.cisco.com/en/US/products/ps6509/products_device_support_tables_list.html.
Determining the Software Version
This section contains procedures for determining the version in use for the following software:
•Cisco Unity Connection Application
•Cisco Personal Communications Assistant Application
•Cisco Unified Communications Operating System
Cisco Unity Connection Application
This section contains two procedures. Use the applicable procedure, depending on whether you want to use Connection Administration or a command-line interface session to determine the version.
To Determine the Version of the Connection Application by Using Cisco Unity Connection Administration
Step 1 In Cisco Unity Connection Administration, in the upper-right corner below the Navigation list, select About.
The Connection version is displayed below "Cisco Unity Connection Administration."
To Determine the Cisco Unity Connection Version by Using the Command-Line Interface
Step 1 Start a command-line interface (CLI) session. (For more information, see Cisco Unified Operating System Administration Help.)
Step 2 Run the show cuc version command.
Cisco Personal Communications Assistant Application
To Determine the Version of the Cisco Personal Communications Assistant (PCA) Application
Step 1 Sign in to the Cisco PCA.
Step 2 On the Cisco PCA Home page, select About in the upper right corner. (The link is available on every Cisco PCA page.)
Step 3 The Cisco Unity Connection version is displayed. The Cisco PCA version is the same as the Connection version.
Cisco Unified Communications Operating System
This section contains two procedures. Use the applicable procedure, depending on whether you want to use Cisco Unified Operating System Administration or a command-line interface session to determine the version.
To Determine the Version of the Cisco Unified Communications Operating System by Using Cisco Unified Operating System Administration
Step 1 In Cisco Unified Operating System Administration, the System Version is displayed below "Cisco Unified Operating System Administration" in the blue banner on the page that appears after you sign in.
To Determine the Version of the Cisco Unified Communications Operating System by Using the Command-Line Interface
Step 1 Start a command-line interface (CLI) session. (For more information, see Cisco Unified Operating System Administration Help.)
Step 2 Run the show version active command.
Version and Description
Revised June 29, 2011
Cisco Unity Connection 8.5(1) SU 2 is a cumulative update that incorporates all of the fixes and changes to Connection version 8.5(1)—including the operating system and components shared by Connection and Cisco Unified CM. It also incorporates additional changes that are specific to this service update, including Connection Engineering Special 47.
Caution
If the Connection server is running an engineering special with a full Cisco Unified Communications Operating System version number between 8.5.1.12019-x and 8.5.1.12899-x, do not upgrade the server to Connection 8.5(1) SU 2 because the upgrade will fail. Instead, upgrade the server with an ES released after 8.5(1) SU 2 that has a full Unified Communications OS version number of 8.5.1.13xxx.x or later to get the SU 2 functionality.
For information on whether you can upgrade directly to Connection 8.5(1) SU 2, see the "Supported Cisco Unified Communications Manager Upgrades" section of the Cisco Unified Communications Manager Software Compatibility Matrix at http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html.
You refer to the full version number of the Cisco Unified Communications Operating System that is currently installed on the active partition to determine upgrade support. The version can be viewed by running the CLI command show version active.
Full version numbers include the build number (for example, 8.5.1.10000-10); the software versions listed on the download pages on Cisco.com are abbreviated version numbers (for example, 8.5(1) ). In the tables of the "Supported Cisco Unified Communications Manager Upgrades" section of the compatibility matrix, full version numbers are listed in the System Version row.
Note Abbreviated version numbers for Connection and the Cisco Unified Communications Operating System are identical except that Connection 2.x versions correspond with 6.x versions of the operating system.
Do not refer to version numbers in any of the administration user interfaces because those versions apply to the interfaces themselves, not to the version installed on the active partition.
New and Changed Support and Functionality—Release 8.5(1) Service Update 2
This section contains information about new and changed support and functionality in the 8.5(1) Service Update 2 release time frame only.
(For information on new and changed support and functionality in Cisco Unity Connection Release 8.5(1), see http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/release/notes/851cucrn.html.)
Exchange 2007 and Exchange 2003 Are Supported with Single Inbox
Revised February 16, 2011
When Connection and Microsoft Exchange mailbox synchronization (single inbox) was introduced in the 8.5(1) release, only Exchange Server 2010 was supported. With Connection 8.5(1) Service Update 1, you can also use Exchange Server 2007 and Exchange Server 2003.
Language Files Are Available
Revised August 01, 2011
Language files for Cisco Unity Connection 8.5 are available on Cisco.com. (For a list of available languages, see the "Available Languages for Cisco Unity Connection 8.x Components" section of the System Requirements for Cisco Unity Connection Release 8.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html.)
If the Connection server is running version 8.5(1) SU 2, install the language files for ES 24.
Note Locale ES 24 is supported with Connection 8.5(1) ES 24 or later versions.
Reconfiguration Required When the Unified Messaging Services Account Has an Exchange 2010 Mailbox
If you configured single inbox with Exchange 2010 and created an Exchange 2010 mailbox for the unified messaging services account, and if you want to configure single inbox with Exchange 2003, you must delete the mailbox and verify Active Directory permissions before you can configure single inbox with Exchange 2003.
Even if you do not want to configure single inbox with Exchange 2003, we recommend that you delete the Exchange 2010 mailbox and verify permissions on the unified messaging services account. (Deleting the Exchange 2010 mailbox for the unified messaging services account also saves an Exchange 2010 Client Access License.)
Caution
If you do not delete the Exchange 2010 mailbox for the unified messaging services account, single inbox will not function correctly with Exchange 2003.
To Delete the Exchange 2010 Mailbox and Verify Permissions on the Unified Messaging Services Account
Step 1 Sign in to a server on which Exchange Management Shell is installed. Sign in by using either an account that is a member of the Enterprise Admins group or an account that has permission to grant permissions on Exchange objects in the configuration container
Step 2 Run the following command to delete the Exchange mailbox:
Disable-Mailbox -Identity "Connection Unified Messaging Services Account"
Step 3 Run the following command to verify that the throttling policy that you created when you configured unified messaging now apply to the Active Directory account instead of to the mailbox:
Get-ThrottlingPolicyAssociation -Identity "<Account>" | findstr "ThrottlingPolicy"
where <Account> is the name of the unified messaging services account in domain\alias format.
Step 4 If the throttling policy is applied to the unified messaging services account, skip the rest of this procedure.
If the throttling policy is not applied to the unified messaging services account, run the following command to apply the policy:
Set-ThrottlingPolicyAssociation -Identity "<Account>" -ThrottlingPolicy "Connection Unified Messaging Services Policy"
Step 5 Rerun the following command to verify that the throttling policy now applies to the account:
Get-ThrottlingPolicyAssociation -Identity "<Account>" | findstr "ThrottlingPolicy"
Important Note
•Service updates do not impact system compatibility unless specifically stated.
Related Documentation
Documentation for Cisco Unity Connection
For descriptions and URLs of Cisco Unity Connection documentation on Cisco.com, see the Documentation Guide for Cisco Unity Connection Release 8.x. The document is shipped with Connection and is available at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/roadmap/8xcucdg.html.
Documentation for Cisco Unified Communications Manager Business Edition
For descriptions and URLs of Cisco Unified Communications Manager Business Edition documentation on Cisco.com, see the Cisco Unified Communications Manager Business Edition Documentation Guide. The document is shipped with Cisco Unified CMBE and is available at http://www.cisco.com/en/US/products/ps7273/products_documentation_roadmaps_list.html.
Note The documentation links on Cisco.com for some Cisco Unity Connection in Cisco Unified CMBE 8.x versions go to documents that are labeled for Cisco Unity Connection Release 8.x. Despite the version label, all content in the documentation applies to both Connection configurations.
Installation Information
For instructions on downloading the service update, see the "Downloading Cisco Unity Connection Release 8.5(1) Service Update 2 Software" section.
For instructions on installing the service update on:
•A Connection 7.x or 8.x server, see the "Upgrading Cisco Unity Connection 7.x or 8.x to the Shipping 8.x Version" chapter of the Reconfiguration and Upgrade Guide for Cisco Unity Connection Release 8.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrugx.html.
•A Connection 2.x server, see the "Upgrading Cisco Unity Connection 2.x to the Shipping 8.x Version" chapter of the Reconfiguration and Upgrade Guide for Cisco Unity Connection Release 8.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrugx.html.
•A Cisco Unified CMBE server, see the "Software Upgrade and Installation" section in the "Software Upgrades" chapter of the Cisco Unified Communications Operating System Administration Guide at http://www.cisco.com/en/US/products/ps7273/prod_maintenance_guides_list.html.
Downloading Cisco Unity Connection Release 8.5(1) Service Update 2 Software
Revised 03 April, 2012
Note The service update files can be used to upgrade Cisco Unity Connection, Cisco Unified Communications Manager, and Cisco Unified Communications Manager Business Edition. The files can be downloaded from the Connection or Cisco Unified CM downloads page.
The service update posted on Cisco.com can be used only to upgrade to Connection 8.5. It cannot be used to install a new Connection 8.5 server or to migrate from Connection 1.x to 8.5.
For information on whether you can upgrade directly from your current version to Connection 8.5(1) SU 2, see the "Version and Description" section.
(For information on supported Cisco Unified Communications Manager and Cisco Unified Communications Manager Business Edition upgrades, see the ReadMe for Cisco Unified Communications Manager Release 8.5(1)su2 on the download page for 8.5(1) SU 2 (start at http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240).)
Caution
With restricted and unrestricted versions of Connection software now available, download software carefully. Upgrading a restricted version to an unrestricted version is supported, but future upgrades are then limited to unrestricted versions. Upgrading an unrestricted version to a restricted version is not supported. For more information about restricted and unrestricted versions of Connection software, see the "Cisco Unity Connection 8.5(1)—Restricted and Unrestricted Versions" section of the
Release Notes for Cisco Unity Connection Release at 8.5(1) at
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/release/notes/851cucrn.html
To Download Cisco Unity Connection Release 8.5(1) Service Update 2 Software
Step 1 Sign in to a computer with a high-speed Internet connection, and go to the Voice and Unified Communications Downloads page at http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=278875240.
Note To access the software download page, you must be signed in to Cisco.com as a registered user.
Step 2 In the tree control on the Downloads page, expand : Products>Voice and Unified Communications>IP Telephony>Unified Messaging>Cisco Unity Connection, and select Cisco Unity Connection Version 8.5.
Step 3 On the Select a Software Type page, select Cisco Unified Communications Manager/Cisco Unity Connection Updates.
Step 4 On the Select a Release page, select 8.5.1SU2, and the download buttons appear on the right side of the page.
Caution
With restricted and unrestricted versions of Connection software now available, download software carefully. Upgrading a restricted version to an unrestricted version is supported, but future upgrades are then limited to unrestricted versions. Upgrading an unrestricted version to a restricted version is not supported.For more information about restricted and unrestricted versions of Connection software, see the "Cisco Unity Connection 8.5(1)—Restricted and Unrestricted Versions" section of the
Release Notes for Cisco Unity Connection Release at 8.5(1) at
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/release/notes/851cucrn.html
Step 5 Confirm that the computer you are using has sufficient hard-disk space for the downloaded files. (The download descriptions include file sizes.)
Step 6 Select the applicable download, then follow the on-screen prompts to complete the download, making note of the MD5 value.
|
Restricted version
|
UCSInstall_UCOS_8.5.1.12900-7.sgn.iso |
|
Unrestricted version
|
UCSInstall_UCOS_UNRST_8.5.1.12900-7.sgn.iso |
Step 7 Use a checksum generator to confirm that the MD5 checksum matches the checksum that is listed on Cisco.com. If the values do not match, the downloaded files are damaged.
Caution
Do not attempt to use a damaged file to install software, or the results will be unpredictable. If the MD5 values do not match, download the file again until the value for the downloaded file matches the value listed on Cisco.com.
Free checksum tools are available on the Internet, or example, the Microsoft File Checksum Integrity Verifier utility. The utility is described in Microsoft Knowledge Base article 841290, Availability and Description of the File Checksum Integrity Verifier Utility. The KB article also includes a link for downloading the utility.
Step 8 If you are installing from a DVD, burn the DVD, noting the following considerations:
•Choose the option to burn a disc image, not the option to copy files. Burning a disc image will extract the thousands of files from the .iso file and write them to a DVD, which is necessary for the files to be accessible for the installation.
•Use the Joliet file system, which accommodates filenames up to 64 characters long.
•If the disc-burning application that you are using includes an option to verify the contents of the burned disc, choose that option. This causes the application to compare the contents of the burned disc with the source files.
Step 9 Confirm that the DVD contains a large number of directories and files.
Step 10 Delete unnecessary files from the hard disk to free disk space, including the .iso file that you downloaded.
Reverting to the Connection Version on the Inactive Partition
See the "Reverting Cisco Unity Connection 8.x Servers to the Version on the Inactive Partition" chapter of the Reconfiguration and Upgrade Guide for Cisco Unity Connection Release 8.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrugx.html.
If a Connection cluster is configured, revert to the previous version on the publisher server first, then on the subscriber server.
Caveat Information
Cisco Unity Connection 8.5(1) Service Update 2 includes Connection Engineering Special 47.
You can find the latest caveat information for Connection version 8.5(1) by using Bug Toolkit, an online tool available for customers to query defects according to their own needs.
Bug Toolkit is available at www.cisco.com/go/bugs. Fill in your query parameters by using the custom settings in the Advanced Settings option.
Note To access Bug Toolkit, you must be logged on to Cisco.com as a registered user.
This section contains the following caveat information:
•Open Caveats—Connection Release 8.5(1) SU 2
•Resolved Caveats—Connection Release 8.5(1) SU 2
•Related Caveats—Cisco Unified Communications Manager 8.5(1) Components That Are Used by Connection 8.5(1)
Release notes for all versions of Cisco Unity Connection are available at http://www.cisco.com/en/US/products/ps6509/prod_release_notes_list.html.
Open Caveats—Connection Release 8.5(1) SU 2
Click a link in the Caveat Number column to view the latest information on the caveat in Bug Toolkit. (Caveats are listed in order by severity, then by component, then by caveat number.)
Table 1 Connection Release 8.5(1) SU 2 Open Caveats
|
Caveat Number
|
Component
|
Severity
|
Description
|
CSCtr14827 |
api |
2 |
CUPI Validation in Notification Devices |
CSCtr07547 |
conversations |
2 |
UC 8.5 ES34 keymap1/alternate-greeting(2)/invalid selection |
CSCtr07603 |
conversations |
2 |
UC 8.5 ES34 Private lists (does not prompt list# before name) |
CSCtr01463 |
messaging |
2 |
Directory replication fails when using Exchange 2010 smart host |
CSCtr01462 |
vmo |
2 |
VMO 8.5(6) & eDocs 5.2 plugin & UC 8.5SU1 playback TRaP to phone fails |
CSCtr15342 |
conversations |
3 |
UC - Call the Sender option not announce for Unknown callers |
CSCtr16181 |
conversations |
3 |
UC 8.5(1) - Change of COS with Voice recognition not working |
CSCtr00750 |
core |
3 |
Temp msg not shreded during rollback when local msg delivery fails |
CSCtr15713 |
database |
3 |
Placeholders account not getting deleted in digital network clusters |
CSCtq80705 |
documentation |
3 |
8.5.1 documentation leaves out detail on enabling IMAP for TTS |
CSCtq81646 |
documentation |
3 |
CUC 8.5.1 visual voicemail document needs complex configuration section |
CSCto17702 |
javanotifier |
3 |
Notifier failure during long load run |
CSCtn85567 |
messaging |
3 |
JPN: Japanese text content in message body not read correctly by TTS |
CSCto56140 |
serverrolesmgr |
3 |
Srm connections not cleared properly after multiple network disruptions |
CSCtq86294 |
serverrolesmgr |
3 |
MTA threads stuck after SBR. No message delivery |
CSCtl72403 |
api |
4 |
UC 7x/8x - Need Doc Explaining User Aliases with Spaces and Underscores |
CSCti96189 |
conversations |
4 |
UC 7.1.x upgrade may cause VVM applet to throw errors |
CSCto56294 |
conversations |
4 |
TUI and PCA appear to have different check for Trivial PIN passwords |
CSCto94600 |
conversations |
4 |
Unity Connection switchid dialing parameters are not configurable |
CSCto78423 |
documentation |
4 |
UC 8.5 - SIB With Exchange 2003 OWA Does Not Show Attachments - Need doc |
CSCtq03037 |
documentation |
4 |
UC 8.5 - SIB Docs Needs to Discuss Outlook Envelope Icon Behavior |
CSCtq86901 |
documentation |
4 |
CUC and CUCMBE 8.5.1 documentation for Hospitatlity does not exist |
CSCtr05345 |
documentation |
4 |
Notes issues CSCsz73548 and CSCsz78213 need documentation on Cisco.com |
CSCtn56826 |
inbox |
4 |
Need option to prevent users from downloading messages via Web inbox |
CSCtr13041 |
messaging |
4 |
Shred fail counter pegged while deleting non existent file in VPIM case |
CSCtq86255 |
serverrolesmgr |
4 |
SBR: intermittent IX000: ISAM error: deadlock detected |
CSCtq63453 |
serviceability |
4 |
Connection CM Database Event Listener service not present in RTMT |
CSCtj82680 |
setup |
4 |
UC DB initialization log file created during installation is not saved |
CSCtq09084 |
setup |
4 |
Need verification when installing patch during fresh install of CUC |
|
|
vmo
|
4
|
VMO 8.5(6) - Outlook 2010 Chinese Characters Created With Backspace Key
|
Resolved Caveats—Connection Release 8.5(1) SU 2
Click a link in the Caveat Number column to view the latest information on the caveat in Bug Toolkit. (Caveats are listed in order by severity, then by component, then by caveat number.)
Table 2 Connection Release 8.5(1) SU 2 Resolved Caveats
|
Caveat Number
|
Component
|
Severity
|
Description
|
CSCtn32532 |
conversations |
2 |
Self-enrollment PIN change exits to Opening Greeting on early digit |
CSCto55080 |
conversations |
2 |
Reply all may fail when warn user of greater than X recipients enabled |
CSCto92216 |
conversations |
2 |
Unity Connection 8.0 - CuCsMgr Core Dump |
CSCtn12347 |
core |
2 |
Pub kernel panic - not synching: audit: backlog limit exceeded |
CSCtn32179 |
database |
2 |
CUCMBE3K: Coredump on Connection database during load test |
CSCtn56740 |
messaging |
2 |
Unity Connection Security Vulnerabilities |
CSCtn99779 |
messaging |
2 |
CUC 8.5(1) - Tomcat PermGen OutOfMemory error |
CSCtn09734 |
serverrolesmgr |
2 |
SRM deadlock causes splitbrain |
CSCtn56289 |
serverrolesmgr |
2 |
Notifier not stopping during SBR |
CSCtl93771 |
setup |
2 |
Unable to setup secure LDAP: trustanchors parameter must be non-empty |
CSCtn61453 |
setup |
2 |
Applying 8.5.1 software as patch results in corrupted CUC installation |
CSCtl88345 |
telephony |
2 |
Connection CuCsMgr core dump with SIP integration |
CSCto11584 |
telephony |
2 |
UC does not use backup CUCM Server when primary is down for SIP MWI |
CSCtl66145 |
admin |
3 |
Bulk Edit: Call Handler Message Settings page not complete |
CSCtl92457 |
admin |
3 |
UC Bulk Edit changes modifies notification devices unexpectedly |
CSCtn75890 |
admin |
3 |
UC 8.5(1) - Play/Record button grayed out on greetings page |
CSCto12713 |
admin |
3 |
Tomcat coredump on unhandled exception |
CSCto81437 |
admin |
3 |
Unity Connection 8.5 - User Bulk Edit for Message Actions fails |
CSCtn12477 |
api |
3 |
Comet events may not work when duplicate alias exists |
CSCtn18167 |
api |
3 |
CUPI: Private DL can't remove a remote member |
CSCto09897 |
api |
3 |
CUTI calls incorrectly being throttled by Connection |
CSCto94978 |
api |
3 |
VMWS: Addressing a message to a numeric alias fails. |
CSCtk99553 |
conversations |
3 |
UC notification cascading fails if first device has Repeat Notification |
CSCtl41495 |
conversations |
3 |
Incorrect prompt leads to unsuccessful set of notification phone number |
CSCtn44240 |
conversations |
3 |
CuCsMgr generates core dump during port group reset |
CSCtn79993 |
conversations |
3 |
Message properties for a voicemail does not play senders voice name |
CSCtq21583 |
conversations |
3 |
Replies to secure messages using VUI are not secure |
CSCtn93670 |
core |
3 |
All temp msg recordings should be shred w/ Secure Delete enabled |
CSCtk10632 |
database |
3 |
Message discarded for user being moved on other servers in network |
CSCtl80493 |
database |
3 |
Redundant partition field in tbl_Handler causing undeletable partition |
CSCtl98298 |
database |
3 |
Not able to delete the user when replacing him with another user |
CSCtn04142 |
database |
3 |
DbEventPublisher/CuDbProxy hang that slowed down the MWI |
CSCtn04170 |
database |
3 |
CuDbProxy services: forked processes need to exit before the parent exit |
CSCtn04181 |
database |
3 |
CuDbProxy services should have time out if there is no data to read |
CSCtn09444 |
database |
3 |
45 sec sign-in delay on sub when pub is down or being upgraded |
CSCtn59526 |
database |
3 |
CUC - Account with User Administrator role cannot delete users |
CSCtn82029 |
database |
3 |
Converting Cluster to Standalone cause upgrade to fail |
CSCto09000 |
database |
3 |
Failed install/upgrade - db connection error |
CSCto62704 |
database |
3 |
Dataharvester stops recording new call data for Reports |
CSCto86181 |
database |
3 |
CUC does not include capability to add Contact Templates to SDL |
CSCto87784 |
database |
3 |
CLI: Tables not truncated when running overwritedb command |
CSCto96822 |
database |
3 |
Dbevent: socket does not get closed |
CSCtq02144 |
database |
3 |
Clean dynamic data task reports error |
CSCtn12757 |
inbox |
3 |
WebInbox: Expired Password window does not allow user to regain focus |
CSCtn89664 |
inbox |
3 |
WebInbox: Playback recording over TRaP and then sending results in error |
CSCtl59563 |
interop |
3 |
Replication set does not get updated during rollback |
CSCtn90464 |
interop |
3 |
DN: Certificates for remote locations are missing |
CSCtn94190 |
interop |
3 |
DN: Replication stalls after joining a newer version to an older version |
CSCtn05523 |
javanotifier |
3 |
MWI/Notifications processing may stop after SBR |
CSCtn59947 |
javanotifier |
3 |
missing traces in failure scenario |
CSCto07347 |
javanotifier |
3 |
Notifier memory space should be increased on larger platforms |
CSCto17702 |
javanotifier |
3 |
Notifier failure during long load run |
CSCto34364 |
javanotifier |
3 |
NDR/Notification loop generates bunch of SpeechView notifications |
CSCto84110 |
javanotifier |
3 |
UC - Notifier's RuleScheduler Falls Asleep Indefinitely and Never Wakes |
CSCto06793 |
mediamaster |
3 |
UC 8.5 (1) -Call drops due to unsupported audio format |
CSCtn18217 |
messaging |
3 |
ALL-LANG: WebInbox Scrambled text/formatting for various messages |
CSCtn65586 |
messaging |
3 |
NDR does not get delivered to senders mailbox when using VPIM |
CSCtn85567 |
messaging |
3 |
JPN: Japanese text content in message body not read correctly by TTS |
CSCto34821 |
messaging |
3 |
Double quote in displayname causes failsafe, unable to message |
CSCto35509 |
messaging |
3 |
UC 8.5 - SIB Exchange Servers Search Fails for Exchange 2003 Clusters |
CSCto54535 |
messaging |
3 |
UC 8.5 experience long delay when using TTS on large mailboxes |
CSCto78506 |
messaging |
3 |
VPIM NDRs from Postmaster not delivered to non-BH with prefixes |
CSCto87622 |
messaging |
3 |
NDR /Badmail message sent to SDL with nested SDL and Access List enabled |
CSCto99773 |
messaging |
3 |
Wrong warning seen when testing UMS with Exchange 2003 |
CSCtl94104 |
perfmon |
3 |
CuFileSync process crashed and locked up DBEventPublisher service |
CSCto02933 |
reports |
3 |
UC 8 Message Activity Report broken With Concurrent Generations |
CSCto56140 |
serverrolesmgr |
3 |
Srm connections not cleared properly after multiple network disruptions |
CSCtn57152 |
setup |
3 |
Switch version from 7.1.x to 8.6 does not pass version info to scripts |
CSCtn74650 |
telephony |
3 |
CUC oneway audio on G729a connections |
CSCto20579 |
telephony |
3 |
GSM codec speed-up slow-down Message Playback Garbled |
CSCto72693 |
telephony |
3 |
UC - G.729 and iLBC compression experience some popping in prompts |
CSCtl88424 |
admin |
4 |
Bulk Administration Tool: Assigns Wrong Partition to Alt Extension |
CSCto62785 |
admin |
4 |
Cxn Meeting Place user-level SA "Test" button does not work |
CSCtq22684 |
admin |
4 |
Bad link to contact template on system DL Members Page |
CSCtq33700 |
admin |
4 |
BAT fails to create contact when contact template is not in CSV file |
CSCtl02502 |
api |
4 |
CUPI import from LDAP does not import all fields |
CSCtn03480 |
api |
4 |
CUMI should return ImapUID field with message info |
CSCtn17815 |
conversations |
4 |
VVM: Update Send Options screen |
CSCtq31841 |
conversations |
4 |
ALL-LANG: CUC: Voice Prompt: Key menu is not announced on delete. |
CSCtl86195 |
database |
4 |
Dependency Timer not being reset resulting in digital networking errs |
CSCto14054 |
database |
4 |
Setting of Department with User Template may impact Search Function |
CSCto17397 |
javanotifier |
4 |
tbl_eventservicesubscription not cleaned up properly |
CSCto59091 |
javanotifier |
4 |
Cxn Notifier Task Q's diags misleading, not serviceable or practical |
CSCtj73553 |
messaging |
4 |
Add UM service test check server version if "Exch2003" server specified |
CSCtl80518 |
messaging |
4 |
SIB UM acct test Ex2003 non-existent user -> no details |
CSCtn99736 |
messaging |
4 |
BAT for UM accounts does not include TTS |
CSCtj04314 |
telephony |
4 |
UC8 - Live reply with anonymous calling party fails |
CSCtk16176 |
telephony |
4 |
Misleading error message due to cluster port group configuration |
CSCtn17533 |
api |
6 |
CUMI: Recipients list doesn't contain DtmfAccessId |
CSCtn87719 |
api |
6 |
Adding distribution list members one at a time is slow |
CSCtn20769 |
conversations |
6 |
US4110: Conversation Enhancments |
CSCtk01560 |
core |
6 |
SIB: COS misconfiguration lead to license violation. |
CSCtn43086 |
inbox |
6 |
WebInbox: Add playback after record functionality |
CSCtc32553 |
messaging |
6 |
unity connection 7.x negative mailbox size diagnostics |
CSCtf46676 |
messaging |
6 |
MWI resync operation does not recalculate message counts |
CSCtl45095 |
telephony |
6 |
Cxn: Diags missing for crucial parts of a call's origination |
CSCtn05642 |
telephony |
6 |
Need ability to route calls based on CalledParty SCCP element |
|
|
documentation
|
5
|
Incorrect locale version cause VM outage
|
Related Caveats—Cisco Unified Communications Manager 8.5(1) Components That Are Used by Connection 8.5(1)
Table 3 below describes the Cisco Unified Communications Manager components that are used by Cisco Unity Connection.
Caveat information for the Cisco Unified CM components is available in the following documents:
•ReadMe for Cisco Unified Communications Manager Release 8.5(1)su2 on the download page for 8.5(1)SU2 (start at http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240).
•ReadMe for Cisco Unified Communications Manager Release 8.5(1)su1 on the download page for 8.5(1)SU1 (start at http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240).
•Release Notes for Cisco Unified Communications Manager Release 8.5(1) at http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/8_5_1/cucm-rel_notes-851.html.
Table 3 Cisco Unified CM 8.5(1) Components That Are Used by Connection 8.5(1)
|
Cisco Unified CM Component
|
Description
|
backup-restore |
Backup and restore utilities |
ccm-serviceability |
Cisco Unified Serviceability web interface |
cdp |
Cisco Discovery Protocol Drivers |
cli |
Command-line interface (CLI) |
cmui |
Certain elements in the Connection web interfaces (such as search tables and splash screens) |
cpi-afg |
Cisco Unified Communications Answer File Generator |
cpi-appinstall |
Installation and upgrades |
cpi-cert-mgmt |
Certificate management |
cpi-diagnose |
Automated diagnostics system |
cpi-os |
Cisco Unified Communications Operating System |
cpi-platform-api |
Abstraction layer between the Cisco Unified Communications Operating System and the applications hosted on the platform |
cpi-security |
Security for connections to the server |
cpi-service-mgr |
Service Manager (ServM) |
cpi-vendor |
External vendor issues |
cuc-tomcat |
Apache Tomcat and third-party software |
database |
Installation and access to the configuration database (IDS) |
database-ids |
IDS database patches |
ims |
Identity Management System (IMS) |
rtmt |
Real-Time Monitoring Tool (RTMT) |
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.
Cisco Product Security Overview
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
Further information regarding U.S. export regulations may be found at http://www.access.gpo.gov/bis/ear/ear_data.html.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2012 Cisco Systems, Inc. All rights reserved.
Feedback