Cisco Catalyst 8000V Edge Software Installation And Configuration Guide

PDF

Verify Router Configuration

Updated: March 5, 2026

Want to summarize with AI?

Log in

Overview

Describes the verification steps to view the mode and the Day 0 configuration status of an Cisco Catalyst 8000V instance.

To verify whether you’ve deployed or upgraded to the IOS XE 17.4 or later releases successfully, perform the steps in this task.

Procedure

Log in to the CLI and run the show version command.

The command displays the version of your instance. The operating device-mode parameter displays the mode in which your Cisco Catalyst 8000V instance is running.

This is a sample configuration of an instance running in autonomous mode.

Example:

Device# show version | inc operating
Router operating mode: Autonomous
Device# show platform software device-mode
Operating device-mode: Autonomous
Device-mode bootup status:
-------------------------------------
Device# show platform software chasfs r0 brief | inc device_managed_mode
/tmp/chassis/local/rp/chasfs/etc/device_managed_mode : [autonomous]
/tmp/fp/chasfs/etc/device_managed_mode : [autonomous]
Device# show version | inc Last reload
Last reload reason: Enabling autonomous-mode