Cisco Optical Network Planner Configuration Guide, Releases 26.x.x

PDF

Edit the Unique ID of the chassis

Updated: March 10, 2026

Want to summarize with AI?

Log in

Overview

Teaches you how to edit the unique ID of a chassis. Instructs you on using the Layout tab to accurately manage chassis identification within an analyzed network.

Cisco ONP allows you to edit the Unique ID (UID) of a chassis in the Layout tab for an analyzed network.

Follow these steps to edit the Unique ID (UID) of a chassis

Before you begin

Log in to the Cisco ONP web interface.

Procedure

1.

Open the analyzed NCS 1010 network for which you want to edit the UID of the chassis.

Note

For NCS 2000 network, UID edit is available in upgrade and release upgrade modes.
2.

Click the Layout tab on the Cisco ONP homepage.
3.

In the graphical area, click Edit.
4.

Hover over the chassis that you want to edit the UID and click Edit Unique ID.
5.

Enter the UID and click Update.

The chassis UID is updated.