Cisco Optical Network Planner Configuration Guide, Releases 26.x.x
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Cisco Optical Network Planner Configuration Guide, Releases 26.x.x
Updated: March 10, 2026
Want to summarize with AI?
Log inConfigure colored functionality in an NCS 1014 optical network by specifying demand channels and adding NCS 1000 transponders.
Use this procedure to configure colored functionality in an NCS 1014optical network.
NoteDeployment of more than two OLA nodes between two terminal sites is not supported.
Create a network design. See Manually design a network using Cisco ONP.
Set the channel type for each demand.
Under the C-Band properties, select MD-32-EVEN, MD-32-ODD, or MD-32- ODD+MD-32-EVEN as the Colored Add/Drop.
Click Update.
Analyze the network by choosing Network > Analyze.
The colored Add/Drop unit is added in the layout and BOM.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.